IntCurvesFace_Intersector Class Reference

#include <IntCurvesFace_Intersector.hxx>

Inheritance diagram for IntCurvesFace_Intersector:

Public Member Functions
	IntCurvesFace_Intersector (const TopoDS_Face &F, const Standard_Real aTol, const Standard_Boolean aRestr=Standard_True, const Standard_Boolean UseBToler=Standard_True)
	Load a Face.
void	Perform (const gp_Lin &L, const Standard_Real PInf, const Standard_Real PSup)
	Perform the intersection between the segment L and the loaded face.
void	Perform (const Handle< Adaptor3d_Curve > &HCu, const Standard_Real PInf, const Standard_Real PSup)
	same method for a HCurve from Adaptor3d. PInf an PSup can also be - and + INF.
GeomAbs_SurfaceType	SurfaceType () const
	Return the surface type.
Standard_Boolean	IsDone () const
	True is returned when the intersection have been computed.
Standard_Integer	NbPnt () const
Standard_Real	UParameter (const Standard_Integer I) const
	Returns the U parameter of the ith intersection point on the surface.
Standard_Real	VParameter (const Standard_Integer I) const
	Returns the V parameter of the ith intersection point on the surface.
Standard_Real	WParameter (const Standard_Integer I) const
	Returns the parameter of the ith intersection point on the line.
const gp_Pnt &	Pnt (const Standard_Integer I) const
	Returns the geometric point of the ith intersection between the line and the surface.
IntCurveSurface_TransitionOnCurve	Transition (const Standard_Integer I) const
	Returns the ith transition of the line on the surface.
TopAbs_State	State (const Standard_Integer I) const
	Returns the ith state of the point on the face. The values can be either TopAbs_IN ( the point is in the face) or TopAbs_ON ( the point is on a boundary of the face).
Standard_Boolean	IsParallel () const
	Returns true if curve is parallel or belongs face surface This case is recognized only for some pairs of analytical curves and surfaces (plane - line, ...)
const TopoDS_Face &	Face () const
	Returns the significant face used to determine the intersection.
TopAbs_State	ClassifyUVPoint (const gp_Pnt2d &Puv) const
Bnd_Box	Bounding () const
void	SetUseBoundToler (Standard_Boolean UseBToler)
	Sets the boundary tolerance flag.
Standard_Boolean	GetUseBoundToler () const
	Returns the boundary tolerance flag.
virtual	~IntCurvesFace_Intersector ()
Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.
	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.
Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.
virtual	~Standard_Transient ()
	Destructor must be virtual.
virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.
Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.
Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName.
Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.
Standard_Integer	GetRefCount () const noexcept
	Get the reference counter of this object.
void	IncrementRefCounter () noexcept
	Increments the reference counter of this object.
Standard_Integer	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value.
virtual void	Delete () const
	Memory deallocator for transient classes.

Additional Inherited Members
typedef void	base_type
	Returns a type descriptor about this object.
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.
static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Constructor & Destructor Documentation

IntCurvesFace_Intersector()

IntCurvesFace_Intersector::IntCurvesFace_Intersector	(	const TopoDS_Face &	F,
		const Standard_Real	aTol,
		const Standard_Boolean	aRestr = Standard_True,
		const Standard_Boolean	UseBToler = Standard_True )

Load a Face.

The Tolerance <Tol> is used to determine if the first point of the segment is near the face. In that case, the parameter of the intersection point on the line can be a negative value (greater than -Tol). If aRestr = true UV bounding box of face is used to restrict it's underlined surface, otherwise surface is not restricted. If UseBToler = false then the 2d-point of intersection is classified with null-tolerance (relative to face); otherwise it's using maximum between input tolerance(aTol) and tolerances of face bounds (edges).

~IntCurvesFace_Intersector()

virtual IntCurvesFace_Intersector::~IntCurvesFace_Intersector ( )

virtual

Member Function Documentation

Bounding()

Bnd_Box IntCurvesFace_Intersector::Bounding

(

)

const

ClassifyUVPoint()

TopAbs_State IntCurvesFace_Intersector::ClassifyUVPoint

(

const gp_Pnt2d &

Puv

)

const

Face()

const TopoDS_Face & IntCurvesFace_Intersector::Face

(

)

const

Returns the significant face used to determine the intersection.

GetUseBoundToler()

Standard_Boolean IntCurvesFace_Intersector::GetUseBoundToler

(

)

const

Returns the boundary tolerance flag.

IsDone()

Standard_Boolean IntCurvesFace_Intersector::IsDone

(

)

const

True is returned when the intersection have been computed.

IsParallel()

Standard_Boolean IntCurvesFace_Intersector::IsParallel

(

)

const

Returns true if curve is parallel or belongs face surface This case is recognized only for some pairs of analytical curves and surfaces (plane - line, ...)

NbPnt()

Standard_Integer IntCurvesFace_Intersector::NbPnt

(

)

const

Perform() [1/2]

void IntCurvesFace_Intersector::Perform	(	const gp_Lin &	L,
		const Standard_Real	PInf,
		const Standard_Real	PSup )

Perform the intersection between the segment L and the loaded face.

PInf is the smallest parameter on the line PSup is the highest parameter on the line

For an infinite line PInf and PSup can be +/- RealLast.

Perform() [2/2]

void IntCurvesFace_Intersector::Perform	(	const Handle< Adaptor3d_Curve > &	HCu,
		const Standard_Real	PInf,
		const Standard_Real	PSup )

same method for a HCurve from Adaptor3d. PInf an PSup can also be - and + INF.

Pnt()

const gp_Pnt & IntCurvesFace_Intersector::Pnt

(

const Standard_Integer

I

)

const

Returns the geometric point of the ith intersection between the line and the surface.

SetUseBoundToler()

void IntCurvesFace_Intersector::SetUseBoundToler

(

Standard_Boolean

UseBToler

)

Sets the boundary tolerance flag.

State()

TopAbs_State IntCurvesFace_Intersector::State

(

const Standard_Integer

I

)

const

Returns the ith state of the point on the face. The values can be either TopAbs_IN ( the point is in the face) or TopAbs_ON ( the point is on a boundary of the face).

SurfaceType()

GeomAbs_SurfaceType IntCurvesFace_Intersector::SurfaceType

(

)

const

Return the surface type.

Transition()

IntCurveSurface_TransitionOnCurve IntCurvesFace_Intersector::Transition

(

const Standard_Integer

I

)

const

Returns the ith transition of the line on the surface.

UParameter()

Standard_Real IntCurvesFace_Intersector::UParameter

(

const Standard_Integer

I

)

const

Returns the U parameter of the ith intersection point on the surface.

VParameter()

Standard_Real IntCurvesFace_Intersector::VParameter

(

const Standard_Integer

I

)

const

Returns the V parameter of the ith intersection point on the surface.

WParameter()

Standard_Real IntCurvesFace_Intersector::WParameter

(

const Standard_Integer

I

)

const

Returns the parameter of the ith intersection point on the line.

---

The documentation for this class was generated from the following file:

• IntCurvesFace_Intersector.hxx