A ShapeSets contains a Shape and all its sub-shapes and locations. It can be dump, write and read. More...

#include <TopTools_ShapeSet.hxx>

Inheritance diagram for TopTools_ShapeSet:

Public Member Functions
	TopTools_ShapeSet ()
	Builds an empty ShapeSet.

virtual	~TopTools_ShapeSet ()

void	SetFormatNb (const int theFormatNb)
	Sets the TopTools_FormatVersion.

int	FormatNb () const
	Returns the TopTools_FormatVersion.

virtual void	Clear ()
	Clears the content of the set. This method can be redefined.

int	Add (const TopoDS_Shape &S)
	Stores ~~and its sub-shape. Returns the index of ~~. The method AddGeometry is called on each sub-shape.~~~~

const TopoDS_Shape &	Shape (const int I) const
	Returns the sub-shape of index .

int	Index (const TopoDS_Shape &S) const
	Returns the index of .

const TopTools_LocationSet &	Locations () const

TopTools_LocationSet &	ChangeLocations ()

Standard_OStream &	DumpExtent (Standard_OStream &OS) const
	Dumps the number of objects in me on the stream <OS>. (Number of shapes of each type)

void	DumpExtent (TCollection_AsciiString &S) const
	Dumps the number of objects in me in the string S (Number of shapes of each type)

virtual void	Dump (Standard_OStream &OS) const
	Dumps the content of me on the stream <OS>.

virtual void	Write (Standard_OStream &OS, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Writes the content of me on the stream <OS> in a format that can be read back by Read.

virtual void	Read (Standard_IStream &IS, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Reads the content of me from the stream <IS>. me is first cleared.

void	Dump (const TopoDS_Shape &S, Standard_OStream &OS) const
	Dumps on <OS> the shape ~~. Dumps the orientation, the index of the TShape and the index of the Location.~~

void	Write (const TopoDS_Shape &S, Standard_OStream &OS) const
	Writes on <OS> the shape ~~. Writes the orientation, the index of the TShape and the index of the Location.~~

void	Read (TopoDS_Shape &S, Standard_IStream &IS) const
	Reads from <IS> a shape and returns it in S.

virtual void	AddGeometry (const TopoDS_Shape &S)
	Stores the geometry of .

virtual void	DumpGeometry (Standard_OStream &OS) const
	Dumps the geometry of me on the stream <OS>.

virtual void	WriteGeometry (Standard_OStream &OS, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Writes the geometry of me on the stream <OS> in a format that can be read back by Read.

virtual void	ReadGeometry (Standard_IStream &IS, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Reads the geometry of me from the stream <IS>.

virtual void	DumpGeometry (const TopoDS_Shape &S, Standard_OStream &OS) const
	Dumps the geometry of ~~on the stream <OS>.~~

virtual void	WriteGeometry (const TopoDS_Shape &S, Standard_OStream &OS) const
	Writes the geometry of ~~on the stream <OS> in a format that can be read back by Read.~~

virtual void	ReadGeometry (const TopAbs_ShapeEnum T, Standard_IStream &IS, TopoDS_Shape &S)
	Reads the geometry of a shape of type <T> from the stream <IS> and returns it in .

virtual void	AddShapes (TopoDS_Shape &S1, const TopoDS_Shape &S2)
	Inserts the shape <S2> in the shape <S1>. This method must be redefined to use the correct builder.

virtual void	Check (const TopAbs_ShapeEnum T, TopoDS_Shape &S)
	This method is called after each new completed shape. <T> is the type. ~~is the shape. In this class it does nothing, but it gives the opportunity in derived classes to perform extra treatment on shapes.~~

int	NbShapes () const
	Returns number of shapes read from file.

Static Public Attributes
static const char *const	THE_ASCII_VERSIONS [TopTools_FormatVersion_VERSION_3+1]

Detailed Description

A ShapeSets contains a Shape and all its sub-shapes and locations. It can be dump, write and read.

Methods to handle the geometry can be redefined.

Constructor & Destructor Documentation

◆ TopTools_ShapeSet()

TopTools_ShapeSet::TopTools_ShapeSet ( )

Builds an empty ShapeSet.

◆ ~TopTools_ShapeSet()

virtual TopTools_ShapeSet::~TopTools_ShapeSet ( )

virtual

Member Function Documentation

◆ Add()

int TopTools_ShapeSet::Add ( const TopoDS_Shape & S )

Stores ~~and its sub-shape. Returns the index of ~~. The method AddGeometry is called on each sub-shape.~~~~

◆ AddGeometry()

virtual void TopTools_ShapeSet::AddGeometry ( const TopoDS_Shape & S )

virtual

Stores the geometry of .

Reimplemented in BRepTools_ShapeSet.

◆ AddShapes()

virtual void TopTools_ShapeSet::AddShapes	(	TopoDS_Shape &	S1,
		const TopoDS_Shape &	S2 )

virtual

Inserts the shape <S2> in the shape <S1>. This method must be redefined to use the correct builder.

Reimplemented in BRepTools_ShapeSet.

◆ ChangeLocations()

TopTools_LocationSet & TopTools_ShapeSet::ChangeLocations ( )

◆ Check()

virtual void TopTools_ShapeSet::Check	(	const TopAbs_ShapeEnum	T,
		TopoDS_Shape &	S )

virtual

This method is called after each new completed shape. <T> is the type. ~~is the shape. In this class it does nothing, but it gives the opportunity in derived classes to perform extra treatment on shapes.~~

Reimplemented in BRepTools_ShapeSet.

◆ Clear()

virtual void TopTools_ShapeSet::Clear ( )

virtual

Clears the content of the set. This method can be redefined.

Reimplemented in BRepTools_ShapeSet.

◆ Dump() [1/2]

void TopTools_ShapeSet::Dump	(	const TopoDS_Shape &	S,
		Standard_OStream &	OS ) const

Dumps on <OS> the shape ~~. Dumps the orientation, the index of the TShape and the index of the Location.~~

◆ Dump() [2/2]

virtual void TopTools_ShapeSet::Dump ( Standard_OStream & OS ) const

virtual

Dumps the content of me on the stream <OS>.

Dumps the shapes from first to last. For each Shape Dump the type, the flags, the subshapes calls DumpGeometry(S)

Dumps the geometry calling DumpGeometry.

Dumps the locations.

◆ DumpExtent() [1/2]

Standard_OStream & TopTools_ShapeSet::DumpExtent ( Standard_OStream & OS ) const

Dumps the number of objects in me on the stream <OS>. (Number of shapes of each type)

◆ DumpExtent() [2/2]

void TopTools_ShapeSet::DumpExtent ( TCollection_AsciiString & S ) const

Dumps the number of objects in me in the string S (Number of shapes of each type)

◆ DumpGeometry() [1/2]

virtual void TopTools_ShapeSet::DumpGeometry	(	const TopoDS_Shape &	S,
		Standard_OStream &	OS ) const

virtual

Dumps the geometry of ~~on the stream <OS>.~~

Reimplemented in BRepTools_ShapeSet.

◆ DumpGeometry() [2/2]

virtual void TopTools_ShapeSet::DumpGeometry ( Standard_OStream & OS ) const

virtual

Dumps the geometry of me on the stream <OS>.

Reimplemented in BRepTools_ShapeSet.

◆ FormatNb()

int TopTools_ShapeSet::FormatNb ( ) const

Returns the TopTools_FormatVersion.

◆ Index()

int TopTools_ShapeSet::Index ( const TopoDS_Shape & S ) const

Returns the index of .

◆ Locations()

const TopTools_LocationSet & TopTools_ShapeSet::Locations ( ) const

◆ NbShapes()

int TopTools_ShapeSet::NbShapes ( ) const

Returns number of shapes read from file.

◆ Read() [1/2]

virtual void TopTools_ShapeSet::Read	(	Standard_IStream &	IS,
		const Message_ProgressRange &	theProgress = Message_ProgressRange() )

virtual

Reads the content of me from the stream <IS>. me is first cleared.

Reads the locations.

Reads the geometry calling ReadGeometry.

Reads the shapes. For each shape Reads the type. calls ReadGeometry(T,S). Reads the flag, the subshapes.

◆ Read() [2/2]

void TopTools_ShapeSet::Read	(	TopoDS_Shape &	S,
		Standard_IStream &	IS ) const

Reads from <IS> a shape and returns it in S.

◆ ReadGeometry() [1/2]

virtual void TopTools_ShapeSet::ReadGeometry	(	const TopAbs_ShapeEnum	T,
		Standard_IStream &	IS,
		TopoDS_Shape &	S )

virtual

Reads the geometry of a shape of type <T> from the stream <IS> and returns it in .

Reimplemented in BRepTools_ShapeSet.

◆ ReadGeometry() [2/2]

virtual void TopTools_ShapeSet::ReadGeometry	(	Standard_IStream &	IS,
		const Message_ProgressRange &	theProgress = Message_ProgressRange() )

virtual

Reads the geometry of me from the stream <IS>.

Reimplemented in BRepTools_ShapeSet.

◆ SetFormatNb()

void TopTools_ShapeSet::SetFormatNb ( const int theFormatNb )

Sets the TopTools_FormatVersion.

◆ Shape()

const TopoDS_Shape & TopTools_ShapeSet::Shape ( const int I ) const

Returns the sub-shape of index .

◆ Write() [1/2]

void TopTools_ShapeSet::Write	(	const TopoDS_Shape &	S,
		Standard_OStream &	OS ) const

Writes on <OS> the shape ~~. Writes the orientation, the index of the TShape and the index of the Location.~~

◆ Write() [2/2]

virtual void TopTools_ShapeSet::Write	(	Standard_OStream &	OS,
		const Message_ProgressRange &	theProgress = Message_ProgressRange() )

virtual

Writes the content of me on the stream <OS> in a format that can be read back by Read.

Writes the locations.

Writes the geometry calling WriteGeometry.

Dumps the shapes from last to first. For each shape: Write the type. calls WriteGeometry(S). Write the flags, the subshapes.

◆ WriteGeometry() [1/2]

virtual void TopTools_ShapeSet::WriteGeometry	(	const TopoDS_Shape &	S,
		Standard_OStream &	OS ) const

virtual

Writes the geometry of ~~on the stream <OS> in a format that can be read back by Read.~~

Reimplemented in BRepTools_ShapeSet.

◆ WriteGeometry() [2/2]

virtual void TopTools_ShapeSet::WriteGeometry	(	Standard_OStream &	OS,
		const Message_ProgressRange &	theProgress = Message_ProgressRange() )

virtual

Writes the geometry of me on the stream <OS> in a format that can be read back by Read.

Reimplemented in BRepTools_ShapeSet.

Field Documentation

◆ THE_ASCII_VERSIONS

const char* const TopTools_ShapeSet::THE_ASCII_VERSIONS[TopTools_FormatVersion_VERSION_3+1]

static

The documentation for this class was generated from the following file:

TopTools_ShapeSet.hxx

Public Member Functions

Static Public Attributes

Detailed Description

Constructor & Destructor Documentation

◆ TopTools_ShapeSet()

◆ ~TopTools_ShapeSet()

Member Function Documentation

◆ Add()

◆ AddGeometry()

◆ AddShapes()

◆ ChangeLocations()

◆ Check()

◆ Clear()

◆ Dump() [1/2]

◆ Dump() [2/2]

◆ DumpExtent() [1/2]

◆ DumpExtent() [2/2]

◆ DumpGeometry() [1/2]

◆ DumpGeometry() [2/2]

◆ FormatNb()

◆ Index()

◆ Locations()

◆ NbShapes()

◆ Read() [1/2]

◆ Read() [2/2]

◆ ReadGeometry() [1/2]

◆ ReadGeometry() [2/2]

◆ SetFormatNb()

◆ Shape()

◆ Write() [1/2]

◆ Write() [2/2]

◆ WriteGeometry() [1/2]

◆ WriteGeometry() [2/2]

Field Documentation

◆ THE_ASCII_VERSIONS