qualifies the aspect properties for the VRML conversation of a specific kind of object. This includes for example color, maximal chordial deviation, etc... More...

#include <VrmlConverter_Drawer.hxx>

Inheritance diagram for VrmlConverter_Drawer:

[legend]

Public Member Functions
	VrmlConverter_Drawer ()

void	SetTypeOfDeflection (const Aspect_TypeOfDeflection aTypeOfDeflection)
	by default: TOD_Relative; however, except for the shapes, the drawing will be made using the absolute deviation.

Aspect_TypeOfDeflection	TypeOfDeflection () const

void	SetMaximalChordialDeviation (const Standard_Real aChordialDeviation)
	Defines the maximal chordial deviation when drawing any curve; If this value is one of the obvious parameters of methods, current value from Drawer won't be used. This value is used by:

Standard_Real	MaximalChordialDeviation () const
	returns the maximal chordial deviation. Default value: 0.1

void	SetDeviationCoefficient (const Standard_Real aCoefficient)
	default 0.001

Standard_Real	DeviationCoefficient () const

void	SetDiscretisation (const Standard_Integer d)
	default: 17 points. Defines the Discretisation (myNbPoints) when drawing any curve; If this value is one of the obvious parameters of methods, current value from Drawer won't be used. This value is used by:

Standard_Integer	Discretisation () const

void	SetMaximalParameterValue (const Standard_Real Value)
	defines the maximum value allowed for the first and last parameters of an infinite curve. Default value: 500. VrmlConverter_Curve VrmlConverter_WFRestrictedFace VrmlConverter_WFShape

Standard_Real	MaximalParameterValue () const

void	SetIsoOnPlane (const Standard_Boolean OnOff)
	enables the drawing of isos on planes. By default there are no isos on planes.

Standard_Boolean	IsoOnPlane () const
	returns True if the drawing of isos on planes is enabled.

Handle< VrmlConverter_IsoAspect >	UIsoAspect ()
	Defines the attributes which are used when drawing an U isoparametric curve of a face. Defines the number of U isoparametric curves to be drawn for a single face. The default values are the same default values from Vrml package.

void	SetUIsoAspect (const Handle< VrmlConverter_IsoAspect > &anAspect)

Handle< VrmlConverter_IsoAspect >	VIsoAspect ()
	Defines the attributes which are used when drawing an V isoparametric curve of a face. Defines the number of V isoparametric curves to be drawn for a single face. The default values are the same default values from Vrml package.

void	SetVIsoAspect (const Handle< VrmlConverter_IsoAspect > &anAspect)

Handle< VrmlConverter_LineAspect >	FreeBoundaryAspect ()
	The default values are the same default values from Vrml package. These attributes are used by the following algorithms: VrmlConverter_WFShape VrmlConverter_WFDeflectionShape.

void	SetFreeBoundaryAspect (const Handle< VrmlConverter_LineAspect > &anAspect)

void	SetFreeBoundaryDraw (const Standard_Boolean OnOff)
	enables the drawing the free boundaries By default the free boundaries are drawn.

Standard_Boolean	FreeBoundaryDraw () const
	returns True if the drawing of the free boundaries is enabled.

Handle< VrmlConverter_LineAspect >	WireAspect ()
	The default values are the same default values from Vrml package. These attributes are used by the following algorithms: VrmlConverter_WFShape VrmlConverter_WFDeflectionShape.

void	SetWireAspect (const Handle< VrmlConverter_LineAspect > &anAspect)

void	SetWireDraw (const Standard_Boolean OnOff)
	enables the drawing the wire By default the wire are drawn.

Standard_Boolean	WireDraw () const
	returns True if the drawing of the wire is enabled.

Handle< VrmlConverter_LineAspect >	UnFreeBoundaryAspect ()
	The default values are the same default values from Vrml package. These attributes are used by the following algorithms: VrmlConverter_WFShape VrmlConverter_WFDeflectionShape.

void	SetUnFreeBoundaryAspect (const Handle< VrmlConverter_LineAspect > &anAspect)

void	SetUnFreeBoundaryDraw (const Standard_Boolean OnOff)
	enables the drawing the unfree boundaries By default the unfree boundaries are drawn.

Standard_Boolean	UnFreeBoundaryDraw () const
	returns True if the drawing of the unfree boundaries is enabled.

Handle< VrmlConverter_LineAspect >	LineAspect ()
	The default values are the same default values from Vrml package.

void	SetLineAspect (const Handle< VrmlConverter_LineAspect > &anAspect)

Handle< VrmlConverter_PointAspect >	PointAspect ()

void	SetPointAspect (const Handle< VrmlConverter_PointAspect > &anAspect)

Handle< VrmlConverter_ShadingAspect >	ShadingAspect ()
	The default values are the same default values from Vrml package.

void	SetShadingAspect (const Handle< VrmlConverter_ShadingAspect > &anAspect)

Standard_Boolean	DrawHiddenLine () const
	returns Standard_True if the hidden lines are to be drawn. By default the hidden lines are not drawn.

void	EnableDrawHiddenLine ()
	sets DrawHiddenLine = Standard_True - the hidden lines are drawn.

void	DisableDrawHiddenLine ()
	sets DrawHiddenLine = Standard_False - the hidden lines are not drawn.

Handle< VrmlConverter_LineAspect >	HiddenLineAspect ()
	returns LineAspect for the hidden lines. The default values are the same default values from Vrml package.

void	SetHiddenLineAspect (const Handle< VrmlConverter_LineAspect > &anAspect)
	sets LineAspect for the hidden lines.

Handle< VrmlConverter_LineAspect >	SeenLineAspect ()
	returns LineAspect for the seen lines. The default values are the same default values from Vrml package.

void	SetSeenLineAspect (const Handle< VrmlConverter_LineAspect > &anAspect)
	sets LineAspect for the seen lines.

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.

virtual	~Standard_Transient ()
	Destructor must be virtual.

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName.

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.

Standard_Integer	GetRefCount () const noexcept
	Get the reference counter of this object.

void	IncrementRefCounter () noexcept
	Increments the reference counter of this object.

Standard_Integer	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value.

virtual void	Delete () const
	Memory deallocator for transient classes.

Additional Inherited Members
typedef void	base_type
	Returns a type descriptor about this object.

static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Detailed Description

qualifies the aspect properties for the VRML conversation of a specific kind of object. This includes for example color, maximal chordial deviation, etc...

Constructor & Destructor Documentation

◆ VrmlConverter_Drawer()

VrmlConverter_Drawer::VrmlConverter_Drawer ( )

Member Function Documentation

◆ DeviationCoefficient()

Standard_Real VrmlConverter_Drawer::DeviationCoefficient ( ) const

◆ DisableDrawHiddenLine()

void VrmlConverter_Drawer::DisableDrawHiddenLine ( )

sets DrawHiddenLine = Standard_False - the hidden lines are not drawn.

◆ Discretisation()

Standard_Integer VrmlConverter_Drawer::Discretisation ( ) const

◆ DrawHiddenLine()

Standard_Boolean VrmlConverter_Drawer::DrawHiddenLine ( ) const

returns Standard_True if the hidden lines are to be drawn. By default the hidden lines are not drawn.

◆ EnableDrawHiddenLine()

void VrmlConverter_Drawer::EnableDrawHiddenLine ( )

sets DrawHiddenLine = Standard_True - the hidden lines are drawn.

◆ FreeBoundaryAspect()

Handle< VrmlConverter_LineAspect > VrmlConverter_Drawer::FreeBoundaryAspect ( )

The default values are the same default values from Vrml package. These attributes are used by the following algorithms: VrmlConverter_WFShape VrmlConverter_WFDeflectionShape.

◆ FreeBoundaryDraw()

Standard_Boolean VrmlConverter_Drawer::FreeBoundaryDraw ( ) const

returns True if the drawing of the free boundaries is enabled.

◆ HiddenLineAspect()

Handle< VrmlConverter_LineAspect > VrmlConverter_Drawer::HiddenLineAspect ( )

returns LineAspect for the hidden lines. The default values are the same default values from Vrml package.

◆ IsoOnPlane()

Standard_Boolean VrmlConverter_Drawer::IsoOnPlane ( ) const

returns True if the drawing of isos on planes is enabled.

◆ LineAspect()

Handle< VrmlConverter_LineAspect > VrmlConverter_Drawer::LineAspect ( )

The default values are the same default values from Vrml package.

◆ MaximalChordialDeviation()

Standard_Real VrmlConverter_Drawer::MaximalChordialDeviation ( ) const

returns the maximal chordial deviation. Default value: 0.1

◆ MaximalParameterValue()

Standard_Real VrmlConverter_Drawer::MaximalParameterValue ( ) const

◆ PointAspect()

Handle< VrmlConverter_PointAspect > VrmlConverter_Drawer::PointAspect ( )

◆ SeenLineAspect()

Handle< VrmlConverter_LineAspect > VrmlConverter_Drawer::SeenLineAspect ( )

returns LineAspect for the seen lines. The default values are the same default values from Vrml package.

◆ SetDeviationCoefficient()

void VrmlConverter_Drawer::SetDeviationCoefficient ( const Standard_Real aCoefficient )

default 0.001

◆ SetDiscretisation()

void VrmlConverter_Drawer::SetDiscretisation ( const Standard_Integer d )

default: 17 points. Defines the Discretisation (myNbPoints) when drawing any curve; If this value is one of the obvious parameters of methods, current value from Drawer won't be used. This value is used by:

VrmlConverter_Curve VrmlConverter_WFRestrictedFace VrmlConverter_WFShape

◆ SetFreeBoundaryAspect()

void VrmlConverter_Drawer::SetFreeBoundaryAspect ( const Handle< VrmlConverter_LineAspect > & anAspect )

◆ SetFreeBoundaryDraw()

void VrmlConverter_Drawer::SetFreeBoundaryDraw ( const Standard_Boolean OnOff )

enables the drawing the free boundaries By default the free boundaries are drawn.

◆ SetHiddenLineAspect()

void VrmlConverter_Drawer::SetHiddenLineAspect ( const Handle< VrmlConverter_LineAspect > & anAspect )

sets LineAspect for the hidden lines.

◆ SetIsoOnPlane()

void VrmlConverter_Drawer::SetIsoOnPlane ( const Standard_Boolean OnOff )

enables the drawing of isos on planes. By default there are no isos on planes.

◆ SetLineAspect()

void VrmlConverter_Drawer::SetLineAspect ( const Handle< VrmlConverter_LineAspect > & anAspect )

◆ SetMaximalChordialDeviation()

void VrmlConverter_Drawer::SetMaximalChordialDeviation ( const Standard_Real aChordialDeviation )

Defines the maximal chordial deviation when drawing any curve; If this value is one of the obvious parameters of methods, current value from Drawer won't be used. This value is used by:

VrmlConverter_DeflectionCurve VrmlConverter_WFDeflectionRestrictedFace VrmlConverter_WFDeflectionShape

◆ SetMaximalParameterValue()

void VrmlConverter_Drawer::SetMaximalParameterValue ( const Standard_Real Value )

defines the maximum value allowed for the first and last parameters of an infinite curve. Default value: 500. VrmlConverter_Curve VrmlConverter_WFRestrictedFace VrmlConverter_WFShape

◆ SetPointAspect()

void VrmlConverter_Drawer::SetPointAspect ( const Handle< VrmlConverter_PointAspect > & anAspect )

◆ SetSeenLineAspect()

void VrmlConverter_Drawer::SetSeenLineAspect ( const Handle< VrmlConverter_LineAspect > & anAspect )

sets LineAspect for the seen lines.

◆ SetShadingAspect()

void VrmlConverter_Drawer::SetShadingAspect ( const Handle< VrmlConverter_ShadingAspect > & anAspect )

◆ SetTypeOfDeflection()

void VrmlConverter_Drawer::SetTypeOfDeflection ( const Aspect_TypeOfDeflection aTypeOfDeflection )

by default: TOD_Relative; however, except for the shapes, the drawing will be made using the absolute deviation.

◆ SetUIsoAspect()

void VrmlConverter_Drawer::SetUIsoAspect ( const Handle< VrmlConverter_IsoAspect > & anAspect )

◆ SetUnFreeBoundaryAspect()

void VrmlConverter_Drawer::SetUnFreeBoundaryAspect ( const Handle< VrmlConverter_LineAspect > & anAspect )

◆ SetUnFreeBoundaryDraw()

void VrmlConverter_Drawer::SetUnFreeBoundaryDraw ( const Standard_Boolean OnOff )

enables the drawing the unfree boundaries By default the unfree boundaries are drawn.

◆ SetVIsoAspect()

void VrmlConverter_Drawer::SetVIsoAspect ( const Handle< VrmlConverter_IsoAspect > & anAspect )

◆ SetWireAspect()

void VrmlConverter_Drawer::SetWireAspect ( const Handle< VrmlConverter_LineAspect > & anAspect )

◆ SetWireDraw()

void VrmlConverter_Drawer::SetWireDraw ( const Standard_Boolean OnOff )

enables the drawing the wire By default the wire are drawn.

◆ ShadingAspect()

Handle< VrmlConverter_ShadingAspect > VrmlConverter_Drawer::ShadingAspect ( )

The default values are the same default values from Vrml package.

◆ TypeOfDeflection()

Aspect_TypeOfDeflection VrmlConverter_Drawer::TypeOfDeflection ( ) const

◆ UIsoAspect()

Handle< VrmlConverter_IsoAspect > VrmlConverter_Drawer::UIsoAspect ( )

Defines the attributes which are used when drawing an U isoparametric curve of a face. Defines the number of U isoparametric curves to be drawn for a single face. The default values are the same default values from Vrml package.

These attributes are used by the following algorithms: VrmlConverter_WFRestrictedFace VrmlConverter_WFDeflectionRestrictedFace

◆ UnFreeBoundaryAspect()

Handle< VrmlConverter_LineAspect > VrmlConverter_Drawer::UnFreeBoundaryAspect ( )

The default values are the same default values from Vrml package. These attributes are used by the following algorithms: VrmlConverter_WFShape VrmlConverter_WFDeflectionShape.

◆ UnFreeBoundaryDraw()

Standard_Boolean VrmlConverter_Drawer::UnFreeBoundaryDraw ( ) const

returns True if the drawing of the unfree boundaries is enabled.

◆ VIsoAspect()

Handle< VrmlConverter_IsoAspect > VrmlConverter_Drawer::VIsoAspect ( )

Defines the attributes which are used when drawing an V isoparametric curve of a face. Defines the number of V isoparametric curves to be drawn for a single face. The default values are the same default values from Vrml package.

These attributes are used by the following algorithms: VrmlConverter_WFRestrictedFace VrmlConverter_WFDeflectionRestrictedFace

◆ WireAspect()

Handle< VrmlConverter_LineAspect > VrmlConverter_Drawer::WireAspect ( )

The default values are the same default values from Vrml package. These attributes are used by the following algorithms: VrmlConverter_WFShape VrmlConverter_WFDeflectionShape.

◆ WireDraw()

Standard_Boolean VrmlConverter_Drawer::WireDraw ( ) const

returns True if the drawing of the wire is enabled.

The documentation for this class was generated from the following file:

VrmlConverter_Drawer.hxx

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ VrmlConverter_Drawer()

Member Function Documentation

◆ DeviationCoefficient()

◆ DisableDrawHiddenLine()

◆ Discretisation()

◆ DrawHiddenLine()

◆ EnableDrawHiddenLine()

◆ FreeBoundaryAspect()

◆ FreeBoundaryDraw()

◆ HiddenLineAspect()

◆ IsoOnPlane()

◆ LineAspect()

◆ MaximalChordialDeviation()

◆ MaximalParameterValue()

◆ PointAspect()

◆ SeenLineAspect()

◆ SetDeviationCoefficient()

◆ SetDiscretisation()

◆ SetFreeBoundaryAspect()

◆ SetFreeBoundaryDraw()

◆ SetHiddenLineAspect()

◆ SetIsoOnPlane()

◆ SetLineAspect()

◆ SetMaximalChordialDeviation()

◆ SetMaximalParameterValue()

◆ SetPointAspect()

◆ SetSeenLineAspect()

◆ SetShadingAspect()

◆ SetTypeOfDeflection()

◆ SetUIsoAspect()

◆ SetUnFreeBoundaryAspect()

◆ SetUnFreeBoundaryDraw()

◆ SetVIsoAspect()

◆ SetWireAspect()

◆ SetWireDraw()

◆ ShadingAspect()

◆ TypeOfDeflection()

◆ UIsoAspect()

◆ UnFreeBoundaryAspect()

◆ UnFreeBoundaryDraw()

◆ VIsoAspect()

◆ WireAspect()

◆ WireDraw()