View Issue Details

IDProjectCategoryView StatusDate SubmittedLast Update
0022700Open CASCADEOCCT:Meshpublic2011-08-12 15:212012-11-09 10:31
Reporteroan Assigned Tooan  
PrioritynormalSeveritytrivial 
Status closedResolutionno change required 
PlatformAOSL 
Product Version6.5.2 
Target Version6.5.2 
Summary0022700: No mesh in test chl 922 Z2
DescriptionThere is a bug on model in chl 922 Z2 after applying BRepMesh fix with new data structure BRepMesh_VertexTool. DRAW QA command OCC1048 calls the mesher for the shape with deflection 0.006 as parameter. Result - no triangles. So if you try to make this test manually with lower deflection - result is OK.
TagsNo tags attached.
Test case numberchl 922 Z2

Activities

oan

2011-09-20 10:44

developer   ~0018209

Last edited: 2011-09-20 13:13

 Dear Bugmaster,
Please run the test case chl 922 Z2 on current trunk and check it, I think that the problem no longer reproduced.

mkv

2011-09-20 16:11

tester   ~0018221

Dear BugMaster,
Test case chl 922 Z2 now is OK.
See following results of this test case:
products-20110821-opt - KO
products-20110902-opt - OK
products-20110909-opt - OK
products-20110916-opt - OK

bugmaster

2011-09-20 16:35

administrator   ~0018223

Problem is not reproduced on development version

Issue History

Date Modified Username Field Change
2011-08-12 15:21 oan New Issue
2011-08-12 15:21 oan Assigned To => jgv
2011-08-15 12:38 bugmaster Assigned To jgv => oan
2011-08-15 12:38 bugmaster Status new => assigned
2011-09-20 10:44 oan Note Added: 0018209
2011-09-20 13:13 oan Note Edited: 0018209
2011-09-20 14:48 oan Status assigned => reviewed
2011-09-20 16:11 mkv Note Added: 0018221
2011-09-20 16:11 mkv Test case number => chl 922 Z2
2011-09-20 16:11 mkv Status reviewed => tested
2011-09-20 16:35 bugmaster Note Added: 0018223
2011-09-20 16:35 bugmaster Status tested => closed
2011-09-20 16:35 bugmaster Resolution open => no change required
2012-11-09 10:31 abv Category OCCT:Modeling Algorithms => OCCT:Mesh