Open CASCADE Technology  7.6.0
Public Member Functions

StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol Class Reference

#include <StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol.hxx>

Inheritance diagram for StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol:
Inheritance graph
[legend]

Public Member Functions

 StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol ()
 
void Init (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< StepBasic_MeasureWithUnit > &theMagnitude, const Handle< StepRepr_ShapeAspect > &theTolerancedShapeAspect, const Handle< StepDimTol_GeometricToleranceWithDatumReference > &theGTWDR, const StepDimTol_GeometricToleranceType theType, const Handle< StepDimTol_UnequallyDisposedGeometricTolerance > &theUDGT)
 
void Init (const Handle< TCollection_HAsciiString > &aName, const Handle< TCollection_HAsciiString > &aDescription, const Handle< StepBasic_MeasureWithUnit > &aMagnitude, const StepDimTol_GeometricToleranceTarget &aTolerancedShapeAspect, const Handle< StepDimTol_GeometricToleranceWithDatumReference > &aGTWDR, const StepDimTol_GeometricToleranceType theType, const Handle< StepDimTol_UnequallyDisposedGeometricTolerance > &theUDGT)
 
void SetUnequallyDisposedGeometricTolerance (const Handle< StepDimTol_UnequallyDisposedGeometricTolerance > &theUDGT)
 
Handle< StepDimTol_UnequallyDisposedGeometricToleranceGetUnequallyDisposedGeometricTolerance () const
 
- Public Member Functions inherited from StepDimTol_GeoTolAndGeoTolWthDatRef
 StepDimTol_GeoTolAndGeoTolWthDatRef ()
 
void Init (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< StepBasic_MeasureWithUnit > &theMagnitude, const Handle< StepRepr_ShapeAspect > &theTolerancedShapeAspect, const Handle< StepDimTol_GeometricToleranceWithDatumReference > &theGTWDR, const StepDimTol_GeometricToleranceType theType)
 
void Init (const Handle< TCollection_HAsciiString > &aName, const Handle< TCollection_HAsciiString > &aDescription, const Handle< StepBasic_MeasureWithUnit > &aMagnitude, const StepDimTol_GeometricToleranceTarget &aTolerancedShapeAspect, const Handle< StepDimTol_GeometricToleranceWithDatumReference > &aGTWDR, const StepDimTol_GeometricToleranceType theType)
 
void SetGeometricToleranceWithDatumReference (const Handle< StepDimTol_GeometricToleranceWithDatumReference > &theGTWDR)
 
Handle< StepDimTol_GeometricToleranceWithDatumReferenceGetGeometricToleranceWithDatumReference () const
 
void SetGeometricToleranceType (const StepDimTol_GeometricToleranceType theType)
 
StepDimTol_GeometricToleranceType GetToleranceType () const
 
- Public Member Functions inherited from StepDimTol_GeometricTolerance
 StepDimTol_GeometricTolerance ()
 Empty constructor. More...
 
void Init (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< StepBasic_MeasureWithUnit > &theMagnitude, const Handle< StepRepr_ShapeAspect > &theTolerancedShapeAspect)
 Initialize all fields (own and inherited) AP214. More...
 
void Init (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< StepBasic_MeasureWithUnit > &theMagnitude, const StepDimTol_GeometricToleranceTarget &theTolerancedShapeAspect)
 Initialize all fields (own and inherited) AP242. More...
 
Handle< TCollection_HAsciiStringName () const
 Returns field Name. More...
 
void SetName (const Handle< TCollection_HAsciiString > &theName)
 Set field Name. More...
 
Handle< TCollection_HAsciiStringDescription () const
 Returns field Description. More...
 
void SetDescription (const Handle< TCollection_HAsciiString > &theDescription)
 Set field Description. More...
 
Handle< StepBasic_MeasureWithUnitMagnitude () const
 Returns field Magnitude. More...
 
void SetMagnitude (const Handle< StepBasic_MeasureWithUnit > &theMagnitude)
 Set field Magnitude. More...
 
StepDimTol_GeometricToleranceTarget TolerancedShapeAspect () const
 Returns field TolerancedShapeAspect Note: in AP214(203) type of this attribute can be only StepRepr_ShapeAspect. More...
 
void SetTolerancedShapeAspect (const Handle< StepRepr_ShapeAspect > &theTolerancedShapeAspect)
 Set field TolerancedShapeAspect AP214. More...
 
void SetTolerancedShapeAspect (const StepDimTol_GeometricToleranceTarget &theTolerancedShapeAspect)
 Set field TolerancedShapeAspect AP242. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 

Constructor & Destructor Documentation

◆ StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol()

StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol::StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol ( )

Member Function Documentation

◆ GetUnequallyDisposedGeometricTolerance()

Handle< StepDimTol_UnequallyDisposedGeometricTolerance > StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol::GetUnequallyDisposedGeometricTolerance ( ) const
inline

◆ Init() [1/2]

void StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol::Init ( const Handle< TCollection_HAsciiString > &  aName,
const Handle< TCollection_HAsciiString > &  aDescription,
const Handle< StepBasic_MeasureWithUnit > &  aMagnitude,
const StepDimTol_GeometricToleranceTarget aTolerancedShapeAspect,
const Handle< StepDimTol_GeometricToleranceWithDatumReference > &  aGTWDR,
const StepDimTol_GeometricToleranceType  theType,
const Handle< StepDimTol_UnequallyDisposedGeometricTolerance > &  theUDGT 
)

◆ Init() [2/2]

void StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol::Init ( const Handle< TCollection_HAsciiString > &  theName,
const Handle< TCollection_HAsciiString > &  theDescription,
const Handle< StepBasic_MeasureWithUnit > &  theMagnitude,
const Handle< StepRepr_ShapeAspect > &  theTolerancedShapeAspect,
const Handle< StepDimTol_GeometricToleranceWithDatumReference > &  theGTWDR,
const StepDimTol_GeometricToleranceType  theType,
const Handle< StepDimTol_UnequallyDisposedGeometricTolerance > &  theUDGT 
)

◆ SetUnequallyDisposedGeometricTolerance()

void StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol::SetUnequallyDisposedGeometricTolerance ( const Handle< StepDimTol_UnequallyDisposedGeometricTolerance > &  theUDGT)
inline

The documentation for this class was generated from the following file: