#include <Geom2dHatch_Intersector.hxx>

Inheritance diagram for Geom2dHatch_Intersector:

[legend]

Public Member Functions
	Geom2dHatch_Intersector (const double Confusion, const double Tangency)
	Creates an intersector.

double	ConfusionTolerance () const
	Returns the confusion tolerance of the intersector.

void	SetConfusionTolerance (const double Confusion)
	Sets the confusion tolerance of the intersector.

double	TangencyTolerance () const
	Returns the tangency tolerance of the intersector.

void	SetTangencyTolerance (const double Tangency)
	Sets the tangency tolerance of the intersector.

void	Intersect (const Geom2dAdaptor_Curve &C1, const Geom2dAdaptor_Curve &C2)
	Intersects the curves C1 and C2. The results are retrieved by the usual methods described in IntRes2d_Intersection. Creates an intersector.

	Geom2dHatch_Intersector ()

void	Perform (const gp_Lin2d &L, const double P, const double Tol, const Geom2dAdaptor_Curve &E)
	Performs the intersection between the 2d line segment (<L>,.

void	LocalGeometry (const Geom2dAdaptor_Curve &E, const double U, gp_Dir2d &T, gp_Dir2d &N, double &C) const
	Returns in <T>, <N> and `the tangent, normal and curvature of the edge <E> at parameter value .`

Public Member Functions inherited from Geom2dInt_GInter
	Geom2dInt_GInter ()
	Empty constructor.

	Geom2dInt_GInter (const Adaptor2d_Curve2d &C, const double TolConf, const double Tol)
	Self Intersection of a curve.

	Geom2dInt_GInter (const Adaptor2d_Curve2d &C, const IntRes2d_Domain &D, const double TolConf, const double Tol)
	Self Intersection of a curve with a domain.

	Geom2dInt_GInter (const Adaptor2d_Curve2d &C1, const Adaptor2d_Curve2d &C2, const double TolConf, const double Tol)
	Intersection between 2 curves.

	Geom2dInt_GInter (const Adaptor2d_Curve2d &C1, const IntRes2d_Domain &D1, const Adaptor2d_Curve2d &C2, const double TolConf, const double Tol)
	Intersection between 2 curves.

	Geom2dInt_GInter (const Adaptor2d_Curve2d &C1, const Adaptor2d_Curve2d &C2, const IntRes2d_Domain &D2, const double TolConf, const double Tol)
	Intersection between 2 curves.

	Geom2dInt_GInter (const Adaptor2d_Curve2d &C1, const IntRes2d_Domain &D1, const Adaptor2d_Curve2d &C2, const IntRes2d_Domain &D2, const double TolConf, const double Tol)
	Intersection between 2 curves.

void	Perform (const Adaptor2d_Curve2d &C1, const IntRes2d_Domain &D1, const Adaptor2d_Curve2d &C2, const IntRes2d_Domain &D2, const double TolConf, const double Tol)
	Intersection between 2 curves.

void	Perform (const Adaptor2d_Curve2d &C1, const Adaptor2d_Curve2d &C2, const double TolConf, const double Tol)
	Intersection between 2 curves.

void	Perform (const Adaptor2d_Curve2d &C1, const IntRes2d_Domain &D1, const double TolConf, const double Tol)
	Intersection between 2 curves.

void	Perform (const Adaptor2d_Curve2d &C1, const double TolConf, const double Tol)
	Intersection between 2 curves.

void	Perform (const Adaptor2d_Curve2d &C1, const IntRes2d_Domain &D1, const Adaptor2d_Curve2d &C2, const double TolConf, const double Tol)
	Intersection between 2 curves.

void	Perform (const Adaptor2d_Curve2d &C1, const Adaptor2d_Curve2d &C2, const IntRes2d_Domain &D2, const double TolConf, const double Tol)
	Intersection between 2 curves.

IntRes2d_Domain	ComputeDomain (const Adaptor2d_Curve2d &C1, const double TolDomain) const
	Create a domain from a curve.

void	SetMinNbSamples (const int theMinNbSamples)
	Set / get minimum number of points in polygon intersection.

int	GetMinNbSamples () const

Public Member Functions inherited from IntRes2d_Intersection
bool	IsDone () const
	returns TRUE when the computation was successful.

bool	IsEmpty () const
	Returns TRUE if there is no intersection between the given arguments. The exception NotDone is raised if IsDone returns FALSE.

int	NbPoints () const
	This function returns the number of intersection points between the 2 curves. The exception NotDone is raised if IsDone returns FALSE.

const IntRes2d_IntersectionPoint &	Point (const int N) const
	This function returns the intersection point of range N; The exception NotDone is raised if IsDone returns FALSE. The exception OutOfRange is raised if (N <= 0) or (N > NbPoints).

int	NbSegments () const
	This function returns the number of intersection segments between the two curves. The exception NotDone is raised if IsDone returns FALSE.

const IntRes2d_IntersectionSegment &	Segment (const int N) const
	This function returns the intersection segment of range N; The exception NotDone is raised if IsDone returns FALSE. The exception OutOfRange is raised if (N <= 0) or (N > NbPoints).

void	SetReversedParameters (const bool Reverseflag)

Additional Inherited Members
Protected Member Functions inherited from IntRes2d_Intersection
	IntRes2d_Intersection ()
	Empty constructor.

	IntRes2d_Intersection (const IntRes2d_Intersection &Other)

IntRes2d_Intersection &	operator= (const IntRes2d_Intersection &theOther)=default
	Assignment.

	~IntRes2d_Intersection ()=default
	Destructor is protected, for safe inheritance.

void	SetValues (const IntRes2d_Intersection &Inter)

void	Append (const IntRes2d_Intersection &Inter, const double FirstParam1, const double LastParam1, const double FirstParam2, const double LastParam2)

void	Append (const IntRes2d_IntersectionSegment &Seg)

void	Append (const IntRes2d_IntersectionPoint &Pnt)

void	Insert (const IntRes2d_IntersectionPoint &Pnt)

void	ResetFields ()

bool	ReversedParameters () const

Protected Attributes inherited from IntRes2d_Intersection
NCollection_Sequence< IntRes2d_IntersectionPoint >	lpnt

NCollection_Sequence< IntRes2d_IntersectionSegment >	lseg

bool	done

bool	reverse

Constructor & Destructor Documentation

◆ Geom2dHatch_Intersector() [1/2]

Geom2dHatch_Intersector::Geom2dHatch_Intersector	(	const double	Confusion,
		const double	Tangency )

Creates an intersector.

◆ Geom2dHatch_Intersector() [2/2]

Geom2dHatch_Intersector::Geom2dHatch_Intersector ( )

Member Function Documentation

◆ ConfusionTolerance()

double Geom2dHatch_Intersector::ConfusionTolerance ( ) const

Returns the confusion tolerance of the intersector.

◆ Intersect()

void Geom2dHatch_Intersector::Intersect	(	const Geom2dAdaptor_Curve &	C1,
		const Geom2dAdaptor_Curve &	C2 )

Intersects the curves C1 and C2. The results are retrieved by the usual methods described in IntRes2d_Intersection. Creates an intersector.

◆ LocalGeometry()

void Geom2dHatch_Intersector::LocalGeometry	(	const Geom2dAdaptor_Curve &	E,
		const double	U,
		gp_Dir2d &	T,
		gp_Dir2d &	N,
		double &	C ) const

Returns in <T>, <N> and the tangent, normal and curvature of the edge <E> at parameter value .

◆ Perform()

void Geom2dHatch_Intersector::Perform	(	const gp_Lin2d &	L,
		const double	P,
		const double	Tol,
		const Geom2dAdaptor_Curve &	E )

Performs the intersection between the 2d line segment (<L>,.

) and the Curve <E>. The line segment is the part of the 2d line <L> of parameter range [0,

] (P is positive and can be RealLast()). Tol is the Tolerance on the segment. The order is relevant, the first argument is the segment, the second the Edge.

◆ SetConfusionTolerance()

void Geom2dHatch_Intersector::SetConfusionTolerance ( const double Confusion )

Sets the confusion tolerance of the intersector.

◆ SetTangencyTolerance()

void Geom2dHatch_Intersector::SetTangencyTolerance ( const double Tangency )

Sets the tangency tolerance of the intersector.

◆ TangencyTolerance()

double Geom2dHatch_Intersector::TangencyTolerance ( ) const

Returns the tangency tolerance of the intersector.

The documentation for this class was generated from the following file:

Geom2dHatch_Intersector.hxx

Public Member Functions

Additional Inherited Members