Implementation of an intersection line described by a restriction line on one of the surfaces. More...

#include <IntPatch_RLine.hxx>

Inheritance diagram for IntPatch_RLine:

[legend]

Public Member Functions
	IntPatch_RLine (const bool Tang, const IntSurf_TypeTrans Trans1, const IntSurf_TypeTrans Trans2)
	Creates a restriction as an intersection line when the transitions are In or Out.

	IntPatch_RLine (const bool Tang, const IntSurf_Situation Situ1, const IntSurf_Situation Situ2)
	Creates a restriction as an intersection line when the transitions are Touch.

	IntPatch_RLine (const bool Tang)
	Creates a restriction as an intersection line when the transitions are Undecided.

void	AddVertex (const IntPatch_Point &Pnt, const bool theIsPrepend=false) override
	Adds a vertex in the list. If theIsPrepend == TRUE the new vertex will be added before the first element of vertices sequence. Otherwise, to the end of the sequence.

void	Replace (const int Index, const IntPatch_Point &Pnt)
	Replaces the element of range Index in the list of points.

void	SetFirstPoint (const int IndFirst)

void	SetLastPoint (const int IndLast)

void	Add (const occ::handle< IntSurf_LineOn2S > &L)

bool	IsArcOnS1 () const
	Returns True if the intersection is on the domain of the first patch. Returns False if the intersection is on the domain of the second patch.

bool	IsArcOnS2 () const
	Returns True if the intersection is on the domain of the first patch. Returns False if the intersection is on the domain of the second patch.

void	SetArcOnS1 (const occ::handle< Adaptor2d_Curve2d > &A)

void	SetArcOnS2 (const occ::handle< Adaptor2d_Curve2d > &A)

void	SetParamOnS1 (const double p1, const double p2)

void	SetParamOnS2 (double &p1, double &p2)

const occ::handle< Adaptor2d_Curve2d > &	ArcOnS1 () const
	Returns the concerned arc.

const occ::handle< Adaptor2d_Curve2d > &	ArcOnS2 () const
	Returns the concerned arc.

void	ParamOnS1 (double &p1, double &p2) const

void	ParamOnS2 (double &p1, double &p2) const

bool	HasFirstPoint () const
	Returns True if the line has a known First point. This point is given by the method FirstPoint().

bool	HasLastPoint () const
	Returns True if the line has a known Last point. This point is given by the method LastPoint().

const IntPatch_Point &	FirstPoint () const
	Returns the IntPoint corresponding to the FirstPoint. An exception is raised when HasFirstPoint returns False.

const IntPatch_Point &	LastPoint () const
	Returns the IntPoint corresponding to the LastPoint. An exception is raised when HasLastPoint returns False.

int	NbVertex () const override
	Returns number of vertices (IntPatch_Point) of the line.

const IntPatch_Point &	Vertex (const int Index) const override
	Returns the vertex of range Index on the line.

IntPatch_Point &	ChangeVertex (const int Index) override
	Returns the vertex of range Index on the line.

void	RemoveVertex (const int theIndex) override
	Removes single vertex from the line.

bool	HasPolygon () const

int	NbPnts () const override
	Returns the number of intersection points.

const IntSurf_PntOn2S &	Point (const int Index) const override
	Returns the intersection point of range Index.

void	SetPoint (const int Index, const IntPatch_Point &Pnt)
	Set the Point of index <Index> in the LineOn2S.

void	ComputeVertexParameters (const double Tol)
	Set the parameters of all the vertex on the line. if a vertex is already in the line, its parameter is modified else a new point in the line is inserted.

occ::handle< IntSurf_LineOn2S >	Curve () const override
	Returns set of intersection points.

bool	IsOutSurf1Box (const gp_Pnt2d &theP) const override
	Returns TRUE if theP is out of the box built from the points on 1st surface.

bool	IsOutSurf2Box (const gp_Pnt2d &theP) const override
	Returns TRUE if theP is out of the box built from the points on 2nd surface.

bool	IsOutBox (const gp_Pnt &theP) const override
	Returns TRUE if theP is out of the box built from 3D-points.

void	ClearVertexes () override
	Removes vertices from the line (i.e. cleans svtx member)

void	SetCurve (const occ::handle< IntSurf_LineOn2S > &theNewCurve)

void	Dump (const int theMode) const
	if (theMode == 0) then prints the information about WLine if (theMode == 1) then prints the list of 3d-points if (theMode == 2) then prints the list of 2d-points on the 1st surface Otherwise, prints list of 2d-points on the 2nd surface

Public Member Functions inherited from IntPatch_Line
void	SetValue (const bool Uiso1, const bool Viso1, const bool Uiso2, const bool Viso2)
	To set the values returned by IsUIsoS1,.... The default values are False.

IntPatch_IType	ArcType () const
	Returns the type of geometry 3d (Line, Circle, Parabola, Hyperbola, Ellipse, Analytic, Walking, Restriction)

bool	IsTangent () const
	Returns TRUE if the intersection is a line of tangency between the 2 patches.

IntSurf_TypeTrans	TransitionOnS1 () const
	Returns the type of the transition of the line for the first surface. The transition is "constant" along the line. The transition is IN if the line is oriented in such a way that the system of vector (N1,N2,T) is right-handed, where N1 is the normal to the first surface at a point P, N2 is the normal to the second surface at a point P, T is the tangent to the intersection line at P. If the system of vector is left-handed, the transition is OUT. When N1 and N2 are colinear all along the intersection line, the transition will be.

IntSurf_TypeTrans	TransitionOnS2 () const
	Returns the type of the transition of the line for the second surface. The transition is "constant" along the line.

IntSurf_Situation	SituationS1 () const
	Returns the situation (INSIDE/OUTSIDE/UNKNOWN) of the first patch compared to the second one, when TransitionOnS1 or TransitionOnS2 returns TOUCH. Otherwise, an exception is raised.

IntSurf_Situation	SituationS2 () const
	Returns the situation (INSIDE/OUTSIDE/UNKNOWN) of the second patch compared to the first one, when TransitionOnS1 or TransitionOnS2 returns TOUCH. Otherwise, an exception is raised.

bool	IsUIsoOnS1 () const
	Returns TRUE if the intersection is a U isoparametric curve on the first patch.

bool	IsVIsoOnS1 () const
	Returns TRUE if the intersection is a V isoparametric curve on the first patch.

bool	IsUIsoOnS2 () const
	Returns TRUE if the intersection is a U isoparametric curve on the second patch.

bool	IsVIsoOnS2 () const
	Returns TRUE if the intersection is a V isoparametric curve on the second patch.

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.

virtual	~Standard_Transient ()=default
	Destructor must be virtual.

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.

bool	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.

bool	IsInstance (const char *const theTypeName) const
	Returns a true value if this is an instance of TypeName.

bool	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

bool	IsKind (const char *const theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.

int	GetRefCount () const noexcept
	Get the reference counter of this object.

void	IncrementRefCounter () noexcept
	Increments the reference counter of this object. Uses relaxed memory ordering since incrementing only requires atomicity, not synchronization with other memory operations.

int	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value. Uses release ordering for the decrement to ensure all writes to the object are visible before the count reaches zero. An acquire fence is added only when the count reaches zero, ensuring proper synchronization before deletion. This is more efficient than using acq_rel for every decrement.

virtual void	Delete () const
	Memory deallocator for transient classes.

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object.

Static Public Member Functions inherited from IntPatch_PointLine
static double	CurvatureRadiusOfIntersLine (const occ::handle< Adaptor3d_Surface > &theS1, const occ::handle< Adaptor3d_Surface > &theS2, const IntSurf_PntOn2S &theUVPoint)
	Returns the radius of curvature of the intersection line in given point. Returns negative value if computation is not possible.

Static Public Member Functions inherited from Standard_Transient
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Protected Member Functions inherited from IntPatch_PointLine
	IntPatch_PointLine (const bool Tang, const IntSurf_TypeTrans Trans1, const IntSurf_TypeTrans Trans2)
	To initialize the fields, when the transitions are In or Out.

	IntPatch_PointLine (const bool Tang, const IntSurf_Situation Situ1, const IntSurf_Situation Situ2)
	To initialize the fields, when the transitions are Touch.

	IntPatch_PointLine (const bool Tang)
	To initialize the fields, when the transitions are Undecided.

Protected Member Functions inherited from IntPatch_Line
	IntPatch_Line (const bool Tang, const IntSurf_TypeTrans Trans1, const IntSurf_TypeTrans Trans2)
	To initialize the fields, when the transitions are In or Out.

	IntPatch_Line (const bool Tang, const IntSurf_Situation Situ1, const IntSurf_Situation Situ2)
	To initialize the fields, when the transitions are Touch.

	IntPatch_Line (const bool Tang)
	To initialize the fields, when the transitions are Undecided.

Protected Attributes inherited from IntPatch_Line
IntPatch_IType	typ

Detailed Description

Implementation of an intersection line described by a restriction line on one of the surfaces.

Constructor & Destructor Documentation

◆ IntPatch_RLine() [1/3]

IntPatch_RLine::IntPatch_RLine	(	const bool	Tang,
		const IntSurf_TypeTrans	Trans1,
		const IntSurf_TypeTrans	Trans2 )

Creates a restriction as an intersection line when the transitions are In or Out.

◆ IntPatch_RLine() [2/3]

IntPatch_RLine::IntPatch_RLine	(	const bool	Tang,
		const IntSurf_Situation	Situ1,
		const IntSurf_Situation	Situ2 )

Creates a restriction as an intersection line when the transitions are Touch.

◆ IntPatch_RLine() [3/3]

IntPatch_RLine::IntPatch_RLine ( const bool Tang )

Creates a restriction as an intersection line when the transitions are Undecided.

Member Function Documentation

◆ Add()

void IntPatch_RLine::Add ( const occ::handle< IntSurf_LineOn2S > & L )

◆ AddVertex()

void IntPatch_RLine::AddVertex	(	const IntPatch_Point &	Pnt,
		const bool	theIsPrepend = false )

overridevirtual

Adds a vertex in the list. If theIsPrepend == TRUE the new vertex will be added before the first element of vertices sequence. Otherwise, to the end of the sequence.

Implements IntPatch_PointLine.

◆ ArcOnS1()

const occ::handle< Adaptor2d_Curve2d > & IntPatch_RLine::ArcOnS1 ( ) const

Returns the concerned arc.

◆ ArcOnS2()

const occ::handle< Adaptor2d_Curve2d > & IntPatch_RLine::ArcOnS2 ( ) const

Returns the concerned arc.

◆ ChangeVertex()

IntPatch_Point & IntPatch_RLine::ChangeVertex ( const int Index )

overridevirtual

Returns the vertex of range Index on the line.

Implements IntPatch_PointLine.

◆ ClearVertexes()

void IntPatch_RLine::ClearVertexes ( )

inlineoverridevirtual

Removes vertices from the line (i.e. cleans svtx member)

Implements IntPatch_PointLine.

◆ ComputeVertexParameters()

void IntPatch_RLine::ComputeVertexParameters ( const double Tol )

Set the parameters of all the vertex on the line. if a vertex is already in the line, its parameter is modified else a new point in the line is inserted.

◆ Curve()

occ::handle< IntSurf_LineOn2S > IntPatch_RLine::Curve ( ) const

overridevirtual

Returns set of intersection points.

Implements IntPatch_PointLine.

◆ Dump()

void IntPatch_RLine::Dump ( const int theMode ) const

if (theMode == 0) then prints the information about WLine if (theMode == 1) then prints the list of 3d-points if (theMode == 2) then prints the list of 2d-points on the 1st surface Otherwise, prints list of 2d-points on the 2nd surface

◆ FirstPoint()

const IntPatch_Point & IntPatch_RLine::FirstPoint ( ) const

Returns the IntPoint corresponding to the FirstPoint. An exception is raised when HasFirstPoint returns False.

◆ HasFirstPoint()

bool IntPatch_RLine::HasFirstPoint ( ) const

Returns True if the line has a known First point. This point is given by the method FirstPoint().

◆ HasLastPoint()

bool IntPatch_RLine::HasLastPoint ( ) const

Returns True if the line has a known Last point. This point is given by the method LastPoint().

◆ HasPolygon()

bool IntPatch_RLine::HasPolygon ( ) const

◆ IsArcOnS1()

bool IntPatch_RLine::IsArcOnS1 ( ) const

Returns True if the intersection is on the domain of the first patch. Returns False if the intersection is on the domain of the second patch.

◆ IsArcOnS2()

bool IntPatch_RLine::IsArcOnS2 ( ) const

Returns True if the intersection is on the domain of the first patch. Returns False if the intersection is on the domain of the second patch.

◆ IsOutBox()

bool IntPatch_RLine::IsOutBox ( const gp_Pnt & theP ) const

inlineoverridevirtual

Returns TRUE if theP is out of the box built from 3D-points.

Implements IntPatch_PointLine.

◆ IsOutSurf1Box()

bool IntPatch_RLine::IsOutSurf1Box ( const gp_Pnt2d & theP ) const

inlineoverridevirtual

Returns TRUE if theP is out of the box built from the points on 1st surface.

Implements IntPatch_PointLine.

◆ IsOutSurf2Box()

bool IntPatch_RLine::IsOutSurf2Box ( const gp_Pnt2d & theP ) const

inlineoverridevirtual

Returns TRUE if theP is out of the box built from the points on 2nd surface.

Implements IntPatch_PointLine.

◆ LastPoint()

const IntPatch_Point & IntPatch_RLine::LastPoint ( ) const

Returns the IntPoint corresponding to the LastPoint. An exception is raised when HasLastPoint returns False.

◆ NbPnts()

int IntPatch_RLine::NbPnts ( ) const

overridevirtual

Returns the number of intersection points.

Implements IntPatch_PointLine.

◆ NbVertex()

int IntPatch_RLine::NbVertex ( ) const

overridevirtual

Returns number of vertices (IntPatch_Point) of the line.

Implements IntPatch_PointLine.

◆ ParamOnS1()

void IntPatch_RLine::ParamOnS1	(	double &	p1,
		double &	p2 ) const

◆ ParamOnS2()

void IntPatch_RLine::ParamOnS2	(	double &	p1,
		double &	p2 ) const

◆ Point()

const IntSurf_PntOn2S & IntPatch_RLine::Point ( const int Index ) const

overridevirtual

Returns the intersection point of range Index.

Implements IntPatch_PointLine.

◆ RemoveVertex()

void IntPatch_RLine::RemoveVertex ( const int theIndex )

overridevirtual

Removes single vertex from the line.

Implements IntPatch_PointLine.

◆ Replace()

void IntPatch_RLine::Replace	(	const int	Index,
		const IntPatch_Point &	Pnt )

Replaces the element of range Index in the list of points.

◆ SetArcOnS1()

void IntPatch_RLine::SetArcOnS1 ( const occ::handle< Adaptor2d_Curve2d > & A )

◆ SetArcOnS2()

void IntPatch_RLine::SetArcOnS2 ( const occ::handle< Adaptor2d_Curve2d > & A )

◆ SetCurve()

void IntPatch_RLine::SetCurve ( const occ::handle< IntSurf_LineOn2S > & theNewCurve )

inline

◆ SetFirstPoint()

void IntPatch_RLine::SetFirstPoint ( const int IndFirst )

◆ SetLastPoint()

void IntPatch_RLine::SetLastPoint ( const int IndLast )

◆ SetParamOnS1()

void IntPatch_RLine::SetParamOnS1	(	const double	p1,
		const double	p2 )

◆ SetParamOnS2()

void IntPatch_RLine::SetParamOnS2	(	double &	p1,
		double &	p2 )

◆ SetPoint()

void IntPatch_RLine::SetPoint	(	const int	Index,
		const IntPatch_Point &	Pnt )

Set the Point of index <Index> in the LineOn2S.

◆ Vertex()

const IntPatch_Point & IntPatch_RLine::Vertex ( const int Index ) const

overridevirtual

Returns the vertex of range Index on the line.

Implements IntPatch_PointLine.

The documentation for this class was generated from the following file:

IntPatch_RLine.hxx

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ IntPatch_RLine() [1/3]

◆ IntPatch_RLine() [2/3]

◆ IntPatch_RLine() [3/3]

Member Function Documentation

◆ Add()

◆ AddVertex()

◆ ArcOnS1()

◆ ArcOnS2()

◆ ChangeVertex()

◆ ClearVertexes()

◆ ComputeVertexParameters()

◆ Curve()

◆ Dump()

◆ FirstPoint()

◆ HasFirstPoint()

◆ HasLastPoint()

◆ HasPolygon()

◆ IsArcOnS1()

◆ IsArcOnS2()

◆ IsOutBox()

◆ IsOutSurf1Box()

◆ IsOutSurf2Box()

◆ LastPoint()

◆ NbPnts()

◆ NbVertex()

◆ ParamOnS1()

◆ ParamOnS2()

◆ Point()

◆ RemoveVertex()

◆ Replace()

◆ SetArcOnS1()

◆ SetArcOnS2()

◆ SetCurve()

◆ SetFirstPoint()

◆ SetLastPoint()

◆ SetParamOnS1()

◆ SetParamOnS2()

◆ SetPoint()

◆ Vertex()