IntTools_BeanFaceIntersector Class Reference

The class BeanFaceIntersector computes ranges of parameters on the curve of a bean(part of edge) that bound the parts of bean which are on the surface of a face according to edge and face tolerances. Warning: The real boundaries of the face are not taken into account, Most of the result parts of the bean lays only inside the region of the surface, which includes the inside of the face. And the parts which are out of this region can be excluded from the result. More...

#include <IntTools_BeanFaceIntersector.hxx>

Public Member Functions
	IntTools_BeanFaceIntersector ()
	IntTools_BeanFaceIntersector (const TopoDS_Edge &theEdge, const TopoDS_Face &theFace)
	Initializes the algorithm.
	IntTools_BeanFaceIntersector (const BRepAdaptor_Curve &theCurve, const BRepAdaptor_Surface &theSurface, const double theBeanTolerance, const double theFaceTolerance)
	Initializes the algorithm.
	IntTools_BeanFaceIntersector (const BRepAdaptor_Curve &theCurve, const BRepAdaptor_Surface &theSurface, const double theFirstParOnCurve, const double theLastParOnCurve, const double theUMinParameter, const double theUMaxParameter, const double theVMinParameter, const double theVMaxParameter, const double theBeanTolerance, const double theFaceTolerance)
	Initializes the algorithm theUMinParameter, ... are used for optimization purposes.
void	Init (const TopoDS_Edge &theEdge, const TopoDS_Face &theFace)
	Initializes the algorithm.
void	Init (const BRepAdaptor_Curve &theCurve, const BRepAdaptor_Surface &theSurface, const double theBeanTolerance, const double theFaceTolerance)
	Initializes the algorithm.
void	Init (const BRepAdaptor_Curve &theCurve, const BRepAdaptor_Surface &theSurface, const double theFirstParOnCurve, const double theLastParOnCurve, const double theUMinParameter, const double theUMaxParameter, const double theVMinParameter, const double theVMaxParameter, const double theBeanTolerance, const double theFaceTolerance)
	Initializes the algorithm theUMinParameter, ... are used for optimization purposes.
void	SetContext (const occ::handle< IntTools_Context > &theContext)
	Sets the intersection context.
const occ::handle< IntTools_Context > &	Context () const
	Gets the intersection context.
void	SetBeanParameters (const double theFirstParOnCurve, const double theLastParOnCurve)
	Set restrictions for curve.
void	SetSurfaceParameters (const double theUMinParameter, const double theUMaxParameter, const double theVMinParameter, const double theVMaxParameter)
	Set restrictions for surface.
void	Perform ()
	Launches the algorithm.
bool	IsDone () const
	Returns Done/NotDone state of the algorithm.
const NCollection_Sequence< IntTools_Range > &	Result () const
void	Result (NCollection_Sequence< IntTools_Range > &theResults) const
double	MinimalSquareDistance () const
	Returns the minimal distance found between edge and face.

Detailed Description

The class BeanFaceIntersector computes ranges of parameters on the curve of a bean(part of edge) that bound the parts of bean which are on the surface of a face according to edge and face tolerances. Warning: The real boundaries of the face are not taken into account, Most of the result parts of the bean lays only inside the region of the surface, which includes the inside of the face. And the parts which are out of this region can be excluded from the result.

Constructor & Destructor Documentation

IntTools_BeanFaceIntersector() [1/4]

IntTools_BeanFaceIntersector::IntTools_BeanFaceIntersector

(

)

IntTools_BeanFaceIntersector() [2/4]

IntTools_BeanFaceIntersector::IntTools_BeanFaceIntersector	(	const TopoDS_Edge &	theEdge,
		const TopoDS_Face &	theFace )

Initializes the algorithm.

Warning: The parts of the edge which are on the surface of the face and belong to the whole in the face (if there is) is considered as result

IntTools_BeanFaceIntersector() [3/4]

IntTools_BeanFaceIntersector::IntTools_BeanFaceIntersector	(	const BRepAdaptor_Curve &	theCurve,
		const BRepAdaptor_Surface &	theSurface,
		const double	theBeanTolerance,
		const double	theFaceTolerance )

Initializes the algorithm.

IntTools_BeanFaceIntersector() [4/4]

IntTools_BeanFaceIntersector::IntTools_BeanFaceIntersector	(	const BRepAdaptor_Curve &	theCurve,
		const BRepAdaptor_Surface &	theSurface,
		const double	theFirstParOnCurve,
		const double	theLastParOnCurve,
		const double	theUMinParameter,
		const double	theUMaxParameter,
		const double	theVMinParameter,
		const double	theVMaxParameter,
		const double	theBeanTolerance,
		const double	theFaceTolerance )

Initializes the algorithm theUMinParameter, ... are used for optimization purposes.

Member Function Documentation

Context()

const occ::handle< IntTools_Context > & IntTools_BeanFaceIntersector::Context

(

)

const

Gets the intersection context.

Init() [1/3]

void IntTools_BeanFaceIntersector::Init	(	const BRepAdaptor_Curve &	theCurve,
		const BRepAdaptor_Surface &	theSurface,
		const double	theBeanTolerance,
		const double	theFaceTolerance )

Initializes the algorithm.

Init() [2/3]

void IntTools_BeanFaceIntersector::Init	(	const BRepAdaptor_Curve &	theCurve,
		const BRepAdaptor_Surface &	theSurface,
		const double	theFirstParOnCurve,
		const double	theLastParOnCurve,
		const double	theUMinParameter,
		const double	theUMaxParameter,
		const double	theVMinParameter,
		const double	theVMaxParameter,
		const double	theBeanTolerance,
		const double	theFaceTolerance )

Initializes the algorithm theUMinParameter, ... are used for optimization purposes.

Init() [3/3]

void IntTools_BeanFaceIntersector::Init	(	const TopoDS_Edge &	theEdge,
		const TopoDS_Face &	theFace )

Initializes the algorithm.

Warning: The parts of the edge which are on the surface of the face and belong to the whole in the face (if there is) is considered as result

IsDone()

bool IntTools_BeanFaceIntersector::IsDone ( ) const

inline

Returns Done/NotDone state of the algorithm.

MinimalSquareDistance()

double IntTools_BeanFaceIntersector::MinimalSquareDistance ( ) const

inline

Returns the minimal distance found between edge and face.

Perform()

void IntTools_BeanFaceIntersector::Perform

(

)

Launches the algorithm.

Result() [1/2]

const NCollection_Sequence< IntTools_Range > & IntTools_BeanFaceIntersector::Result

(

)

const

Result() [2/2]

void IntTools_BeanFaceIntersector::Result

(

NCollection_Sequence< IntTools_Range > &

theResults

)

const

SetBeanParameters()

void IntTools_BeanFaceIntersector::SetBeanParameters	(	const double	theFirstParOnCurve,
		const double	theLastParOnCurve )

Set restrictions for curve.

SetContext()

void IntTools_BeanFaceIntersector::SetContext

(

const occ::handle< IntTools_Context > &

theContext

)

Sets the intersection context.

SetSurfaceParameters()

void IntTools_BeanFaceIntersector::SetSurfaceParameters	(	const double	theUMinParameter,
		const double	theUMaxParameter,
		const double	theVMinParameter,
		const double	theVMaxParameter )

Set restrictions for surface.

---

The documentation for this class was generated from the following file:

• IntTools_BeanFaceIntersector.hxx