The class contains handy static functions dealing with the geometry and topology. More...

#include <IntTools_Tools.hxx>

Static Public Member Functions
static int	ComputeVV (const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	Computes distance between vertex V1 and vertex V2, if the distance is less than sum of vertex tolerances returns zero, otherwise returns negative value.

static bool	HasInternalEdge (const TopoDS_Wire &aW)
	Returns True if wire aW contains edges with INTERNAL orientation.

static void	MakeFaceFromWireAndFace (const TopoDS_Wire &aW, const TopoDS_Face &aF, TopoDS_Face &aFNew)
	Build a face based on surface of given face aF and bounded by wire aW.

static TopAbs_State	ClassifyPointByFace (const TopoDS_Face &aF, const gp_Pnt2d &P)

static bool	IsVertex (const TopoDS_Edge &E, const double t)
	Computes square distance between a point on the edge E corresponded to parameter t and vertices of edge E. Returns True if this distance is less than square tolerance of vertex, otherwise returns false.

static bool	IsVertex (const TopoDS_Edge &E, const TopoDS_Vertex &V, const double t)
	Returns True if square distance between vertex V and a point on the edge E corresponded to parameter t is less than square tolerance of V.

static bool	IsVertex (const IntTools_CommonPrt &aCmnPrt)
	Returns True if IsVertx for middle parameter of fist range and first edge returns True and if IsVertex for middle parameter of second range and second range returns True, otherwise returns False.

static bool	IsMiddlePointsEqual (const TopoDS_Edge &E1, const TopoDS_Edge &E2)
	Gets boundary of parameters of E1 and E2. Computes 3d points on each corresponded to average parameters. Returns True if distance between computed points is less than sum of edge tolerance, otherwise returns False.

static bool	IsVertex (const gp_Pnt &aP, const double aTolPV, const TopoDS_Vertex &aV)
	Returns True if the distance between point aP and vertex aV is less or equal to sum of aTolPV and vertex tolerance, otherwise returns False.

static double	IntermediatePoint (const double aFirst, const double aLast)
	Returns some value between aFirst and aLast.

static int	SplitCurve (const IntTools_Curve &aC, NCollection_Sequence< IntTools_Curve > &aS)
	Split aC by average parameter if aC is closed in 3D. Returns positive value if splitting has been done, otherwise returns zero.

static void	RejectLines (const NCollection_Sequence< IntTools_Curve > &aSIn, NCollection_Sequence< IntTools_Curve > &aSOut)
	Puts curves from aSIn to aSOut except those curves that are coincide with first curve from aSIn.

static bool	IsDirsCoinside (const gp_Dir &D1, const gp_Dir &D2)
	Returns True if D1 and D2 coincide.

static bool	IsDirsCoinside (const gp_Dir &D1, const gp_Dir &D2, const double aTol)
	Returns True if D1 and D2 coincide with given tolerance.

static bool	IsClosed (const occ::handle< Geom_Curve > &aC)
	Returns True if aC is BoundedCurve from Geom and the distance between first point of the curve aC and last point is less than 1.e-12.

static double	CurveTolerance (const occ::handle< Geom_Curve > &aC, const double aTolBase)
	Returns adaptive tolerance for given aTolBase if aC is trimmed curve and basis curve is parabola, otherwise returns value of aTolBase.

static bool	CheckCurve (const IntTools_Curve &theCurve, Bnd_Box &theBox)
	Checks if the curve is not covered by the default tolerance (confusion). Builds bounding box for the curve and stores it into <theBox>.

static bool	IsOnPave (const double theT, const IntTools_Range &theRange, const double theTol)

static void	VertexParameters (const IntTools_CommonPrt &theCP, double &theT1, double &theT2)

static void	VertexParameter (const IntTools_CommonPrt &theCP, double &theT)

static bool	IsOnPave1 (const double theT, const IntTools_Range &theRange, const double theTol)

static bool	IsInRange (const IntTools_Range &theRRef, const IntTools_Range &theR, const double theTol)
	Checks if the range <theR> interfere with the range <theRRef>

static int	SegPln (const gp_Lin &theLin, const double theTLin1, const double theTLin2, const double theTolLin, const gp_Pln &thePln, const double theTolPln, gp_Pnt &theP, double &theT, double &theTolP, double &theTmin, double &theTmax)

static bool	ComputeTolerance (const occ::handle< Geom_Curve > &theCurve3D, const occ::handle< Geom2d_Curve > &theCurve2D, const occ::handle< Geom_Surface > &theSurf, const double theFirst, const double theLast, double &theMaxDist, double &theMaxPar, const double theTolRange=Precision::PConfusion(), const bool theToRunParallel=false)
	Computes the max distance between points taken from 3D and 2D curves by the same parameter.

static double	ComputeIntRange (const double theTol1, const double theTol2, const double theAngle)
	Computes the correct Intersection range for Line/Line, Line/Plane and Plane/Plane intersections.

Detailed Description

The class contains handy static functions dealing with the geometry and topology.

Member Function Documentation

◆ CheckCurve()

static bool IntTools_Tools::CheckCurve	(	const IntTools_Curve &	theCurve,
		Bnd_Box &	theBox )

static

Checks if the curve is not covered by the default tolerance (confusion). Builds bounding box for the curve and stores it into <theBox>.

◆ ClassifyPointByFace()

static TopAbs_State IntTools_Tools::ClassifyPointByFace	(	const TopoDS_Face &	aF,
		const gp_Pnt2d &	P )

static

◆ ComputeIntRange()

static double IntTools_Tools::ComputeIntRange	(	const double	theTol1,
		const double	theTol2,
		const double	theAngle )

static

Computes the correct Intersection range for Line/Line, Line/Plane and Plane/Plane intersections.

◆ ComputeTolerance()

static bool IntTools_Tools::ComputeTolerance	(	const occ::handle< Geom_Curve > &	theCurve3D,
		const occ::handle< Geom2d_Curve > &	theCurve2D,
		const occ::handle< Geom_Surface > &	theSurf,
		const double	theFirst,
		const double	theLast,
		double &	theMaxDist,
		double &	theMaxPar,
		const double	theTolRange = Precision::PConfusion(),
		const bool	theToRunParallel = false )

static

Computes the max distance between points taken from 3D and 2D curves by the same parameter.

◆ ComputeVV()

static int IntTools_Tools::ComputeVV	(	const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2 )

static

Computes distance between vertex V1 and vertex V2, if the distance is less than sum of vertex tolerances returns zero, otherwise returns negative value.

◆ CurveTolerance()

static double IntTools_Tools::CurveTolerance	(	const occ::handle< Geom_Curve > &	aC,
		const double	aTolBase )

static

Returns adaptive tolerance for given aTolBase if aC is trimmed curve and basis curve is parabola, otherwise returns value of aTolBase.

◆ HasInternalEdge()

static bool IntTools_Tools::HasInternalEdge ( const TopoDS_Wire & aW )

static

Returns True if wire aW contains edges with INTERNAL orientation.

◆ IntermediatePoint()

static double IntTools_Tools::IntermediatePoint	(	const double	aFirst,
		const double	aLast )

static

Returns some value between aFirst and aLast.

◆ IsClosed()

static bool IntTools_Tools::IsClosed ( const occ::handle< Geom_Curve > & aC )

static

Returns True if aC is BoundedCurve from Geom and the distance between first point of the curve aC and last point is less than 1.e-12.

◆ IsDirsCoinside() [1/2]

static bool IntTools_Tools::IsDirsCoinside	(	const gp_Dir &	D1,
		const gp_Dir &	D2 )

static

Returns True if D1 and D2 coincide.

◆ IsDirsCoinside() [2/2]

static bool IntTools_Tools::IsDirsCoinside	(	const gp_Dir &	D1,
		const gp_Dir &	D2,
		const double	aTol )

static

Returns True if D1 and D2 coincide with given tolerance.

◆ IsInRange()

static bool IntTools_Tools::IsInRange	(	const IntTools_Range &	theRRef,
		const IntTools_Range &	theR,
		const double	theTol )

static

Checks if the range <theR> interfere with the range <theRRef>

◆ IsMiddlePointsEqual()

static bool IntTools_Tools::IsMiddlePointsEqual	(	const TopoDS_Edge &	E1,
		const TopoDS_Edge &	E2 )

static

Gets boundary of parameters of E1 and E2. Computes 3d points on each corresponded to average parameters. Returns True if distance between computed points is less than sum of edge tolerance, otherwise returns False.

◆ IsOnPave()

static bool IntTools_Tools::IsOnPave	(	const double	theT,
		const IntTools_Range &	theRange,
		const double	theTol )

static

◆ IsOnPave1()

static bool IntTools_Tools::IsOnPave1	(	const double	theT,
		const IntTools_Range &	theRange,
		const double	theTol )

static

◆ IsVertex() [1/4]

static bool IntTools_Tools::IsVertex	(	const gp_Pnt &	aP,
		const double	aTolPV,
		const TopoDS_Vertex &	aV )

static

Returns True if the distance between point aP and vertex aV is less or equal to sum of aTolPV and vertex tolerance, otherwise returns False.

◆ IsVertex() [2/4]

static bool IntTools_Tools::IsVertex ( const IntTools_CommonPrt & aCmnPrt )

static

Returns True if IsVertx for middle parameter of fist range and first edge returns True and if IsVertex for middle parameter of second range and second range returns True, otherwise returns False.

◆ IsVertex() [3/4]

static bool IntTools_Tools::IsVertex	(	const TopoDS_Edge &	E,
		const double	t )

static

Computes square distance between a point on the edge E corresponded to parameter t and vertices of edge E. Returns True if this distance is less than square tolerance of vertex, otherwise returns false.

◆ IsVertex() [4/4]

static bool IntTools_Tools::IsVertex	(	const TopoDS_Edge &	E,
		const TopoDS_Vertex &	V,
		const double	t )

static

Returns True if square distance between vertex V and a point on the edge E corresponded to parameter t is less than square tolerance of V.

◆ MakeFaceFromWireAndFace()

static void IntTools_Tools::MakeFaceFromWireAndFace	(	const TopoDS_Wire &	aW,
		const TopoDS_Face &	aF,
		TopoDS_Face &	aFNew )

static

Build a face based on surface of given face aF and bounded by wire aW.

◆ RejectLines()

static void IntTools_Tools::RejectLines	(	const NCollection_Sequence< IntTools_Curve > &	aSIn,
		NCollection_Sequence< IntTools_Curve > &	aSOut )

static

Puts curves from aSIn to aSOut except those curves that are coincide with first curve from aSIn.

◆ SegPln()

static int IntTools_Tools::SegPln	(	const gp_Lin &	theLin,
		const double	theTLin1,
		const double	theTLin2,
		const double	theTolLin,
		const gp_Pln &	thePln,
		const double	theTolPln,
		gp_Pnt &	theP,
		double &	theT,
		double &	theTolP,
		double &	theTmin,
		double &	theTmax )

static

◆ SplitCurve()

static int IntTools_Tools::SplitCurve	(	const IntTools_Curve &	aC,
		NCollection_Sequence< IntTools_Curve > &	aS )

static

Split aC by average parameter if aC is closed in 3D. Returns positive value if splitting has been done, otherwise returns zero.

◆ VertexParameter()

static void IntTools_Tools::VertexParameter	(	const IntTools_CommonPrt &	theCP,
		double &	theT )

static

◆ VertexParameters()

static void IntTools_Tools::VertexParameters	(	const IntTools_CommonPrt &	theCP,
		double &	theT1,
		double &	theT2 )

static

The documentation for this class was generated from the following file:

IntTools_Tools.hxx

Static Public Member Functions

Detailed Description

Member Function Documentation

◆ CheckCurve()

◆ ClassifyPointByFace()

◆ ComputeIntRange()

◆ ComputeTolerance()

◆ ComputeVV()

◆ CurveTolerance()

◆ HasInternalEdge()

◆ IntermediatePoint()

◆ IsClosed()

◆ IsDirsCoinside() [1/2]

◆ IsDirsCoinside() [2/2]

◆ IsInRange()

◆ IsMiddlePointsEqual()

◆ IsOnPave()

◆ IsOnPave1()

◆ IsVertex() [1/4]

◆ IsVertex() [2/4]

◆ IsVertex() [3/4]

◆ IsVertex() [4/4]

◆ MakeFaceFromWireAndFace()

◆ RejectLines()

◆ SegPln()

◆ SplitCurve()

◆ VertexParameter()

◆ VertexParameters()