This class contains logics related to tracking and modification of clipping plane state for particular OpenGl context. It contains information about enabled clipping planes and provides method to change clippings in context. The methods should be executed within OpenGl context associated with instance of this class. More...

#include <OpenGl_Clipping.hxx>

Public Member Functions
general methods
Default constructor.
	OpenGl_Clipping ()
	Initialize.

void	Init ()
	Initialize.

void	Reset (const occ::handle< Graphic3d_SequenceOfHClipPlane > &thePlanes)
	Setup list of global (for entire view) clipping planes and clears local plane list if it was not released before.

void	SetLocalPlanes (const occ::handle< Graphic3d_SequenceOfHClipPlane > &thePlanes)
	Setup list of local (for current object) clipping planes.

bool	IsCappingOn () const

bool	IsClippingOrCappingOn () const

int	NbClippingOrCappingOn () const

bool	HasClippingChains () const
	Return TRUE if there are clipping chains in the list (defining more than 1 sub-plane)

advanced method for disabling defined planes
Return true if some clipping planes have been temporarily disabled.
bool	HasDisabled () const
	Disable plane temporarily.

bool	SetEnabled (const OpenGl_ClippingIterator &thePlane, const bool theIsEnabled)
	Disable plane temporarily.

void	DisableGlobal ()
	Temporarily disable all planes from the global (view) list, keep only local (object) list.

void	RestoreDisabled ()
	Restore all temporarily disabled planes. Does NOT affect constantly disabled planes Graphic3d_ClipPlane::IsOn().

capping algorithm filter
const occ::handle< Graphic3d_ClipPlane > &	CappedChain () const
	Chain which is either temporary disabled or the only one enabled for Capping algorithm.

int	CappedSubPlane () const
	Sub-plane index within filtered Chain; positive number for DisableAllExcept and negative for EnableAllExcept.

bool	IsCappingFilterOn () const
	Return TRUE if capping algorithm is in state, when all clipping planes are temporarily disabled except currently processed one.

bool	IsCappingDisableAllExcept () const
	Return TRUE if capping algorithm is in state, when all clipping planes are temporarily disabled except currently processed one.

bool	IsCappingEnableAllExcept () const
	Return TRUE if capping algorithm is in state, when all clipping planes are enabled except currently rendered one.

void	DisableAllExcept (const occ::handle< Graphic3d_ClipPlane > &theChain, const int theSubPlaneIndex)
	Temporarily disable all planes except specified one for Capping algorithm. Does not affect already disabled planes.

void	EnableAllExcept (const occ::handle< Graphic3d_ClipPlane > &theChain, const int theSubPlaneIndex)
	Enable back planes disabled by DisableAllExcept() for Capping algorithm. Keeps only specified plane enabled.

void	ResetCappingFilter ()
	Resets chain filter for Capping algorithm.

clipping state modification commands

Add planes to the context clipping at the specified system of coordinates. This methods loads appropriate transformation matrix from workspace to to transform equation coordinates. The planes become enabled in the context. If the number of the passed planes exceeds capabilities of OpenGl, the last planes are simply ignored.

Within FFP, method also temporarily resets ModelView matrix before calling glClipPlane(). Otherwise the method just redirects to addLazy().

Parameters

thePlanes [in/out] the list of planes to be added The list then provides information on which planes were really added to clipping state. This list then can be used to fall back to previous state.

void add (const occ::handle< Graphic3d_SequenceOfHClipPlane > &thePlanes, const int theStartIndex)

global clipping planes

void remove (const occ::handle< Graphic3d_SequenceOfHClipPlane > &thePlanes, const int theStartIndex)

Remove the passed set of clipping planes from the context state.

Detailed Description

This class contains logics related to tracking and modification of clipping plane state for particular OpenGl context. It contains information about enabled clipping planes and provides method to change clippings in context. The methods should be executed within OpenGl context associated with instance of this class.

Constructor & Destructor Documentation

◆ OpenGl_Clipping()

OpenGl_Clipping::OpenGl_Clipping ( )

Initialize.

Member Function Documentation

◆ add()

void OpenGl_Clipping::add	(	const occ::handle< Graphic3d_SequenceOfHClipPlane > &	thePlanes,
		const int	theStartIndex )

protected

global clipping planes

◆ CappedChain()

const occ::handle< Graphic3d_ClipPlane > & OpenGl_Clipping::CappedChain ( ) const

inline

Chain which is either temporary disabled or the only one enabled for Capping algorithm.

◆ CappedSubPlane()

int OpenGl_Clipping::CappedSubPlane ( ) const

inline

Sub-plane index within filtered Chain; positive number for DisableAllExcept and negative for EnableAllExcept.

◆ DisableAllExcept()

void OpenGl_Clipping::DisableAllExcept	(	const occ::handle< Graphic3d_ClipPlane > &	theChain,
		const int	theSubPlaneIndex )

Temporarily disable all planes except specified one for Capping algorithm. Does not affect already disabled planes.

◆ DisableGlobal()

void OpenGl_Clipping::DisableGlobal ( )

Temporarily disable all planes from the global (view) list, keep only local (object) list.

◆ EnableAllExcept()

void OpenGl_Clipping::EnableAllExcept	(	const occ::handle< Graphic3d_ClipPlane > &	theChain,
		const int	theSubPlaneIndex )

Enable back planes disabled by DisableAllExcept() for Capping algorithm. Keeps only specified plane enabled.

◆ HasClippingChains()

bool OpenGl_Clipping::HasClippingChains ( ) const

inline

Return TRUE if there are clipping chains in the list (defining more than 1 sub-plane)

◆ HasDisabled()

bool OpenGl_Clipping::HasDisabled ( ) const

inline

Disable plane temporarily.

◆ Init()

void OpenGl_Clipping::Init ( )

Initialize.

◆ IsCappingDisableAllExcept()

bool OpenGl_Clipping::IsCappingDisableAllExcept ( ) const

inline

Return TRUE if capping algorithm is in state, when all clipping planes are temporarily disabled except currently processed one.

◆ IsCappingEnableAllExcept()

bool OpenGl_Clipping::IsCappingEnableAllExcept ( ) const

inline

Return TRUE if capping algorithm is in state, when all clipping planes are enabled except currently rendered one.

◆ IsCappingFilterOn()

bool OpenGl_Clipping::IsCappingFilterOn ( ) const

inline

Return TRUE if capping algorithm is in state, when all clipping planes are temporarily disabled except currently processed one.

◆ IsCappingOn()

bool OpenGl_Clipping::IsCappingOn ( ) const

inline

Returns: true if there are enabled capping planes

◆ IsClippingOrCappingOn()

bool OpenGl_Clipping::IsClippingOrCappingOn ( ) const

inline

Returns: true if there are enabled clipping or capping planes

◆ NbClippingOrCappingOn()

int OpenGl_Clipping::NbClippingOrCappingOn ( ) const

inline

Returns: number of enabled clipping + capping planes

◆ remove()

void OpenGl_Clipping::remove	(	const occ::handle< Graphic3d_SequenceOfHClipPlane > &	thePlanes,
		const int	theStartIndex )

protected

Remove the passed set of clipping planes from the context state.

Parameters

[in] thePlanes the planes to remove from list.

◆ Reset()

void OpenGl_Clipping::Reset ( const occ::handle< Graphic3d_SequenceOfHClipPlane > & thePlanes )

Setup list of global (for entire view) clipping planes and clears local plane list if it was not released before.

◆ ResetCappingFilter()

void OpenGl_Clipping::ResetCappingFilter ( )

Resets chain filter for Capping algorithm.

◆ RestoreDisabled()

void OpenGl_Clipping::RestoreDisabled ( )

Restore all temporarily disabled planes. Does NOT affect constantly disabled planes Graphic3d_ClipPlane::IsOn().

◆ SetEnabled()

bool OpenGl_Clipping::SetEnabled	(	const OpenGl_ClippingIterator &	thePlane,
		const bool	theIsEnabled )

Disable plane temporarily.

◆ SetLocalPlanes()

void OpenGl_Clipping::SetLocalPlanes ( const occ::handle< Graphic3d_SequenceOfHClipPlane > & thePlanes )

Setup list of local (for current object) clipping planes.

The documentation for this class was generated from the following file:

OpenGl_Clipping.hxx

Public Member Functions

clipping state modification commands

Detailed Description

Constructor & Destructor Documentation

◆ OpenGl_Clipping()

Member Function Documentation

◆ add()

◆ CappedChain()

◆ CappedSubPlane()

◆ DisableAllExcept()

◆ DisableGlobal()

◆ EnableAllExcept()

◆ HasClippingChains()

◆ HasDisabled()

◆ Init()

◆ IsCappingDisableAllExcept()

◆ IsCappingEnableAllExcept()

◆ IsCappingFilterOn()

◆ IsCappingOn()

◆ IsClippingOrCappingOn()

◆ NbClippingOrCappingOn()

◆ remove()

◆ Reset()

◆ ResetCappingFilter()

◆ RestoreDisabled()

◆ SetEnabled()

◆ SetLocalPlanes()