#include <HLRBRep_FaceData.hxx>

Public Member Functions
	HLRBRep_FaceData ()

void	Set (const TopoDS_Face &FG, const TopAbs_Orientation Or, const Standard_Boolean Cl, const Standard_Integer NW)
	<Or> is the orientation of the face. <Cl> is true if the face belongs to a closed volume. <NW> is the number of wires ( or block of edges ) of the face.

void	SetWire (const Standard_Integer WI, const Standard_Integer NE)
	Set <NE> the number of edges of the wire number <WI>.

void	SetWEdge (const Standard_Integer WI, const Standard_Integer EWI, const Standard_Integer EI, const TopAbs_Orientation Or, const Standard_Boolean OutL, const Standard_Boolean Inte, const Standard_Boolean Dble, const Standard_Boolean IsoL)
	Set the edge number <EWI> of the wire <WI>.

Standard_Boolean	Selected () const

void	Selected (const Standard_Boolean B)

Standard_Boolean	Back () const

void	Back (const Standard_Boolean B)

Standard_Boolean	Side () const

void	Side (const Standard_Boolean B)

Standard_Boolean	Closed () const

void	Closed (const Standard_Boolean B)

Standard_Boolean	Hiding () const

void	Hiding (const Standard_Boolean B)

Standard_Boolean	Simple () const

void	Simple (const Standard_Boolean B)

Standard_Boolean	Cut () const

void	Cut (const Standard_Boolean B)

Standard_Boolean	WithOutL () const

void	WithOutL (const Standard_Boolean B)

Standard_Boolean	Plane () const

void	Plane (const Standard_Boolean B)

Standard_Boolean	Cylinder () const

void	Cylinder (const Standard_Boolean B)

Standard_Boolean	Cone () const

void	Cone (const Standard_Boolean B)

Standard_Boolean	Sphere () const

void	Sphere (const Standard_Boolean B)

Standard_Boolean	Torus () const

void	Torus (const Standard_Boolean B)

Standard_Real	Size () const

void	Size (const Standard_Real S)

TopAbs_Orientation	Orientation () const

void	Orientation (const TopAbs_Orientation O)

Handle< HLRAlgo_WiresBlock > &	Wires ()

HLRBRep_Surface &	Geometry ()

Standard_ShortReal	Tolerance () const

Protected Types
enum	EMaskFlags { EMaskOrient = 15 , FMaskSelected = 16 , FMaskBack = 32 , FMaskSide = 64 , FMaskClosed = 128 , FMaskHiding = 256 , FMaskSimple = 512 , FMaskCut = 1024 , FMaskWithOutL = 2048 , FMaskPlane = 4096 , FMaskCylinder = 8192 , FMaskCone = 16384 , FMaskSphere = 32768 , FMaskTorus = 65536 }

Member Enumeration Documentation

◆ EMaskFlags

enum HLRBRep_FaceData::EMaskFlags

protected

Enumerator
EMaskOrient
FMaskSelected
FMaskBack
FMaskSide
FMaskClosed
FMaskHiding
FMaskSimple
FMaskCut
FMaskWithOutL
FMaskPlane
FMaskCylinder
FMaskCone
FMaskSphere
FMaskTorus

Constructor & Destructor Documentation

◆ HLRBRep_FaceData()

HLRBRep_FaceData::HLRBRep_FaceData ( )

Member Function Documentation

◆ Back() [1/2]

Standard_Boolean HLRBRep_FaceData::Back ( ) const

◆ Back() [2/2]

void HLRBRep_FaceData::Back ( const Standard_Boolean B )

◆ Closed() [1/2]

Standard_Boolean HLRBRep_FaceData::Closed ( ) const

◆ Closed() [2/2]

void HLRBRep_FaceData::Closed ( const Standard_Boolean B )

◆ Cone() [1/2]

Standard_Boolean HLRBRep_FaceData::Cone ( ) const

◆ Cone() [2/2]

void HLRBRep_FaceData::Cone ( const Standard_Boolean B )

◆ Cut() [1/2]

Standard_Boolean HLRBRep_FaceData::Cut ( ) const

◆ Cut() [2/2]

void HLRBRep_FaceData::Cut ( const Standard_Boolean B )

◆ Cylinder() [1/2]

Standard_Boolean HLRBRep_FaceData::Cylinder ( ) const

◆ Cylinder() [2/2]

void HLRBRep_FaceData::Cylinder ( const Standard_Boolean B )

◆ Geometry()

HLRBRep_Surface & HLRBRep_FaceData::Geometry ( )

◆ Hiding() [1/2]

Standard_Boolean HLRBRep_FaceData::Hiding ( ) const

◆ Hiding() [2/2]

void HLRBRep_FaceData::Hiding ( const Standard_Boolean B )

◆ Orientation() [1/2]

TopAbs_Orientation HLRBRep_FaceData::Orientation ( ) const

◆ Orientation() [2/2]

void HLRBRep_FaceData::Orientation ( const TopAbs_Orientation O )

◆ Plane() [1/2]

Standard_Boolean HLRBRep_FaceData::Plane ( ) const

◆ Plane() [2/2]

void HLRBRep_FaceData::Plane ( const Standard_Boolean B )

◆ Selected() [1/2]

Standard_Boolean HLRBRep_FaceData::Selected ( ) const

◆ Selected() [2/2]

void HLRBRep_FaceData::Selected ( const Standard_Boolean B )

◆ Set()

void HLRBRep_FaceData::Set	(	const TopoDS_Face &	FG,
		const TopAbs_Orientation	Or,
		const Standard_Boolean	Cl,
		const Standard_Integer	NW )

<Or> is the orientation of the face. <Cl> is true if the face belongs to a closed volume. <NW> is the number of wires ( or block of edges ) of the face.

◆ SetWEdge()

void HLRBRep_FaceData::SetWEdge	(	const Standard_Integer	WI,
		const Standard_Integer	EWI,
		const Standard_Integer	EI,
		const TopAbs_Orientation	Or,
		const Standard_Boolean	OutL,
		const Standard_Boolean	Inte,
		const Standard_Boolean	Dble,
		const Standard_Boolean	IsoL )

Set the edge number <EWI> of the wire <WI>.

◆ SetWire()

void HLRBRep_FaceData::SetWire	(	const Standard_Integer	WI,
		const Standard_Integer	NE )

Set <NE> the number of edges of the wire number <WI>.

◆ Side() [1/2]

Standard_Boolean HLRBRep_FaceData::Side ( ) const

◆ Side() [2/2]

void HLRBRep_FaceData::Side ( const Standard_Boolean B )

◆ Simple() [1/2]

Standard_Boolean HLRBRep_FaceData::Simple ( ) const

◆ Simple() [2/2]

void HLRBRep_FaceData::Simple ( const Standard_Boolean B )

◆ Size() [1/2]

Standard_Real HLRBRep_FaceData::Size ( ) const

◆ Size() [2/2]

void HLRBRep_FaceData::Size ( const Standard_Real S )

◆ Sphere() [1/2]

Standard_Boolean HLRBRep_FaceData::Sphere ( ) const

◆ Sphere() [2/2]

void HLRBRep_FaceData::Sphere ( const Standard_Boolean B )

◆ Tolerance()

Standard_ShortReal HLRBRep_FaceData::Tolerance ( ) const

◆ Torus() [1/2]

Standard_Boolean HLRBRep_FaceData::Torus ( ) const

◆ Torus() [2/2]

void HLRBRep_FaceData::Torus ( const Standard_Boolean B )

◆ Wires()

Handle< HLRAlgo_WiresBlock > & HLRBRep_FaceData::Wires ( )

◆ WithOutL() [1/2]

Standard_Boolean HLRBRep_FaceData::WithOutL ( ) const

◆ WithOutL() [2/2]

void HLRBRep_FaceData::WithOutL ( const Standard_Boolean B )

The documentation for this class was generated from the following file:

HLRBRep_FaceData.hxx

Public Member Functions

Protected Types