ShapeUpgrade_ShapeDivideContinuity Class Reference

API Tool for converting shapes with C0 geometry into C1 ones. More...

#include <ShapeUpgrade_ShapeDivideContinuity.hxx>

Inheritance diagram for ShapeUpgrade_ShapeDivideContinuity:

Public Member Functions
	ShapeUpgrade_ShapeDivideContinuity ()
	ShapeUpgrade_ShapeDivideContinuity (const TopoDS_Shape &S)
	Initialize by a Shape.
void	SetTolerance (const double Tol)
	Sets tolerance.
void	SetTolerance2d (const double Tol)
	Sets tolerance.
void	SetBoundaryCriterion (const GeomAbs_Shape Criterion=GeomAbs_C1)
	Defines a criterion of continuity for the boundary (all the Wires)
void	SetPCurveCriterion (const GeomAbs_Shape Criterion=GeomAbs_C1)
	Defines a criterion of continuity for the boundary (all the pcurves of Wires)
void	SetSurfaceCriterion (const GeomAbs_Shape Criterion=GeomAbs_C1)
	Defines a criterion of continuity for the boundary (all the Wires)
Public Member Functions inherited from ShapeUpgrade_ShapeDivide
	ShapeUpgrade_ShapeDivide ()
	ShapeUpgrade_ShapeDivide (const TopoDS_Shape &S)
	Initialize by a Shape.
void	Init (const TopoDS_Shape &S)
	Initialize by a Shape.
virtual	~ShapeUpgrade_ShapeDivide ()
void	SetPrecision (const double Prec)
	Defines the spatial precision used for splitting.
void	SetMaxTolerance (const double maxtol)
	Sets maximal allowed tolerance.
void	SetMinTolerance (const double mintol)
	Sets minimal allowed tolerance.
void	SetSurfaceSegmentMode (const bool Segment)
	Purpose sets mode for trimming (segment) surface by wire UV bounds.
virtual bool	Perform (const bool newContext=true)
	Performs splitting and computes the resulting shape If newContext is True (default), the internal context will be cleared at start, else previous substitutions will be acting.
TopoDS_Shape	Result () const
	Gives the resulting Shape, or Null shape if not done.
occ::handle< ShapeBuild_ReShape >	GetContext () const
	Returns context with all the modifications made during last call(s) to Perform() recorded.
void	SetContext (const occ::handle< ShapeBuild_ReShape > &context)
	Sets context with recorded modifications to be applied during next call(s) to Perform(shape,false)
virtual void	SetMsgRegistrator (const occ::handle< ShapeExtend_BasicMsgRegistrator > &msgreg)
	Sets message registrator.
occ::handle< ShapeExtend_BasicMsgRegistrator >	MsgRegistrator () const
	Returns message registrator.
void	SendMsg (const TopoDS_Shape &shape, const Message_Msg &message, const Message_Gravity gravity=Message_Info) const
	Sends a message to be attached to the shape. Calls corresponding message of message registrator.
bool	Status (const ShapeExtend_Status status) const
	Queries the status of last call to Perform OK : no splitting was done (or no call to Perform) DONE1: some edges were split DONE2: surface was split FAIL1: some errors occurred.
void	SetSplitFaceTool (const occ::handle< ShapeUpgrade_FaceDivide > &splitFaceTool)
	Sets the tool for splitting faces.
void	SetEdgeMode (const int aEdgeMode)
	Sets mode for splitting 3d curves from edges. 0 - only curve 3d from free edges. 1 - only curve 3d from shared edges. 2 - all curve 3d.

Protected Member Functions
occ::handle< ShapeUpgrade_FaceDivide >	GetSplitFaceTool () const override
	Returns the tool for dividing faces.
Protected Member Functions inherited from ShapeUpgrade_ShapeDivide
virtual Message_Msg	GetFaceMsg () const
virtual Message_Msg	GetWireMsg () const
virtual Message_Msg	GetEdgeMsg () const
	Returns a message describing modification of a shape.

Additional Inherited Members
Protected Attributes inherited from ShapeUpgrade_ShapeDivide
occ::handle< ShapeBuild_ReShape >	myContext
occ::handle< ShapeExtend_BasicMsgRegistrator >	myMsgReg
TopoDS_Shape	myShape
TopoDS_Shape	myResult
double	myPrecision
double	myMinTol
double	myMaxTol
bool	mySegmentMode
int	myStatus
int	myEdgeMode

Detailed Description

API Tool for converting shapes with C0 geometry into C1 ones.

Constructor & Destructor Documentation

ShapeUpgrade_ShapeDivideContinuity() [1/2]

ShapeUpgrade_ShapeDivideContinuity::ShapeUpgrade_ShapeDivideContinuity

(

)

ShapeUpgrade_ShapeDivideContinuity() [2/2]

ShapeUpgrade_ShapeDivideContinuity::ShapeUpgrade_ShapeDivideContinuity

(

const TopoDS_Shape &

S

)

Initialize by a Shape.

Member Function Documentation

GetSplitFaceTool()

occ::handle< ShapeUpgrade_FaceDivide > ShapeUpgrade_ShapeDivideContinuity::GetSplitFaceTool ( ) const

overrideprotectedvirtual

Returns the tool for dividing faces.

Reimplemented from ShapeUpgrade_ShapeDivide.

SetBoundaryCriterion()

void ShapeUpgrade_ShapeDivideContinuity::SetBoundaryCriterion

(

const GeomAbs_Shape

Criterion = GeomAbs_C1

)

Defines a criterion of continuity for the boundary (all the Wires)

The possible values are C0, G1, C1, G2, C2, C3, CN The default is C1 to respect the Cas.Cade Shape Validity. G1 and G2 are not authorized.

SetPCurveCriterion()

void ShapeUpgrade_ShapeDivideContinuity::SetPCurveCriterion

(

const GeomAbs_Shape

Criterion = GeomAbs_C1

)

Defines a criterion of continuity for the boundary (all the pcurves of Wires)

The possible values are C0, G1, C1, G2, C2, C3, CN The default is C1 to respect the Cas.Cade Shape Validity. G1 and G2 are not authorized.

SetSurfaceCriterion()

void ShapeUpgrade_ShapeDivideContinuity::SetSurfaceCriterion

(

const GeomAbs_Shape

Criterion = GeomAbs_C1

)

Defines a criterion of continuity for the boundary (all the Wires)

The possible values are C0, G1, C1, G2, C2, C3, CN The default is C1 to respect the Cas.Cade Shape Validity. G1 and G2 are not authorized.

SetTolerance()

void ShapeUpgrade_ShapeDivideContinuity::SetTolerance

(

const double

Tol

)

Sets tolerance.

SetTolerance2d()

void ShapeUpgrade_ShapeDivideContinuity::SetTolerance2d

(

const double

Tol

)

Sets tolerance.

---

The documentation for this class was generated from the following file:

• ShapeUpgrade_ShapeDivideContinuity.hxx