Open CASCADE Technology  7.0.0
Public Member Functions

GC_MakePlane Class Reference

This class implements the following algorithms used to create a Plane from gp. More...

#include <GC_MakePlane.hxx>

Inheritance diagram for GC_MakePlane:
Inheritance graph
[legend]

Public Member Functions

 GC_MakePlane (const gp_Ax2 &A2)
 Creates a plane located in 3D space with an axis placement two axis. The "ZDirection" of "A2" is the direction normal to the plane. The "Location" point of "A2" is the origin of the plane. The "XDirection" and "YDirection" of "A2" define the directions of the U isoparametric and V isoparametric curves. More...
 
 GC_MakePlane (const gp_Pln &Pl)
 Creates a plane from a non persistent plane from package gp. More...
 
 GC_MakePlane (const gp_Pnt &P, const gp_Dir &V)
 P is the "Location" point or origin of the plane. V is the direction normal to the plane. More...
 
 GC_MakePlane (const Standard_Real A, const Standard_Real B, const Standard_Real C, const Standard_Real D)
 Creates a plane from its cartesian equation : Ax + By + Cz + D = 0.0 Status is "BadEquation" if Sqrt (A*A + B*B + C*C) <= Resolution from gp. More...
 
 GC_MakePlane (const gp_Pln &Pln, const gp_Pnt &Point)
 Make a Plane from Geom <ThePlane> parallel to another Pln <Pln> and passing through a Pnt <Point>. More...
 
 GC_MakePlane (const gp_Pln &Pln, const Standard_Real Dist)
 Make a Plane from Geom <ThePlane> parallel to another Pln <Pln> at the distance <Dist> which can be greater or lower than zero. In the first case the result is at the distance <Dist> to the plane <Pln> in the direction of the normal to <Pln>. Otherwize it is in the oposite direction. More...
 
 GC_MakePlane (const gp_Pnt &P1, const gp_Pnt &P2, const gp_Pnt &P3)
 Make a Plane from Geom <ThePlane> passing through 3 Pnt <P1>,<P2>,<P3>. It returns false if <P1> <P2> <P3> are confused. More...
 
 GC_MakePlane (const gp_Ax1 &Axis)
 Make a Plane passing through the location of <Axis>and normal to the Direction of <Axis>. More...
 
const Handle< Geom_Plane > & Value () const
 Returns the constructed plane. Exceptions StdFail_NotDone if no plane is constructed. More...
 
 operator const Handle< Geom_Plane > & () const
 
- Public Member Functions inherited from GC_Root
Standard_Boolean IsDone () const
 Returns true if the construction is successful. More...
 
gce_ErrorType Status () const
 Returns the status of the construction: More...
 

Additional Inherited Members

- Protected Attributes inherited from GC_Root
gce_ErrorType TheError
 

Detailed Description

This class implements the following algorithms used to create a Plane from gp.

Constructor & Destructor Documentation

GC_MakePlane::GC_MakePlane ( const gp_Ax2 A2)

Creates a plane located in 3D space with an axis placement two axis. The "ZDirection" of "A2" is the direction normal to the plane. The "Location" point of "A2" is the origin of the plane. The "XDirection" and "YDirection" of "A2" define the directions of the U isoparametric and V isoparametric curves.

GC_MakePlane::GC_MakePlane ( const gp_Pln Pl)

Creates a plane from a non persistent plane from package gp.

GC_MakePlane::GC_MakePlane ( const gp_Pnt P,
const gp_Dir V 
)

P is the "Location" point or origin of the plane. V is the direction normal to the plane.

GC_MakePlane::GC_MakePlane ( const Standard_Real  A,
const Standard_Real  B,
const Standard_Real  C,
const Standard_Real  D 
)

Creates a plane from its cartesian equation : Ax + By + Cz + D = 0.0 Status is "BadEquation" if Sqrt (A*A + B*B + C*C) <= Resolution from gp.

GC_MakePlane::GC_MakePlane ( const gp_Pln Pln,
const gp_Pnt Point 
)

Make a Plane from Geom <ThePlane> parallel to another Pln <Pln> and passing through a Pnt <Point>.

GC_MakePlane::GC_MakePlane ( const gp_Pln Pln,
const Standard_Real  Dist 
)

Make a Plane from Geom <ThePlane> parallel to another Pln <Pln> at the distance <Dist> which can be greater or lower than zero. In the first case the result is at the distance <Dist> to the plane <Pln> in the direction of the normal to <Pln>. Otherwize it is in the oposite direction.

GC_MakePlane::GC_MakePlane ( const gp_Pnt P1,
const gp_Pnt P2,
const gp_Pnt P3 
)

Make a Plane from Geom <ThePlane> passing through 3 Pnt <P1>,<P2>,<P3>. It returns false if <P1> <P2> <P3> are confused.

GC_MakePlane::GC_MakePlane ( const gp_Ax1 Axis)

Make a Plane passing through the location of <Axis>and normal to the Direction of <Axis>.

Member Function Documentation

GC_MakePlane::operator const Handle< Geom_Plane > & ( ) const
inline
const Handle< Geom_Plane >& GC_MakePlane::Value ( ) const

Returns the constructed plane. Exceptions StdFail_NotDone if no plane is constructed.


The documentation for this class was generated from the following file: