Provides an algorithm to compute a point on a curve situated at a given distance from another point on the curve, the distance being measured along the curve (curvilinear abscissa on the curve). This algorithm is also used to compute the length of a curve. An AbscissaPoint object provides a framework for: More...

#include <GCPnts_AbscissaPoint.hxx>

Public Member Functions
	GCPnts_AbscissaPoint ()

	GCPnts_AbscissaPoint (const Adaptor3d_Curve &C, const Standard_Real Abscissa, const Standard_Real U0)
	the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0>. More...

	GCPnts_AbscissaPoint (const Standard_Real Tol, const Adaptor3d_Curve &C, const Standard_Real Abscissa, const Standard_Real U0)
	the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0> with the given tolerance. More...

	GCPnts_AbscissaPoint (const Standard_Real Tol, const Adaptor2d_Curve2d &C, const Standard_Real Abscissa, const Standard_Real U0)
	the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0> with the given tolerance. More...

	GCPnts_AbscissaPoint (const Adaptor2d_Curve2d &C, const Standard_Real Abscissa, const Standard_Real U0)
	the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0>. More...

	GCPnts_AbscissaPoint (const Adaptor3d_Curve &C, const Standard_Real Abscissa, const Standard_Real U0, const Standard_Real Ui)
	the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0>. <Ui> is the starting value used in the iterative process which find the solution, it must be close to the final solution More...

	GCPnts_AbscissaPoint (const Adaptor2d_Curve2d &C, const Standard_Real Abscissa, const Standard_Real U0, const Standard_Real Ui)
	the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0>. <Ui> is the starting value used in the iterative process which find the solution, it must be closed to the final solution More...

	GCPnts_AbscissaPoint (const Adaptor3d_Curve &C, const Standard_Real Abscissa, const Standard_Real U0, const Standard_Real Ui, const Standard_Real Tol)
	the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0>. <Ui> is the starting value used in the iterative process which find the solution, it must be close to the final solution More...

	GCPnts_AbscissaPoint (const Adaptor2d_Curve2d &C, const Standard_Real Abscissa, const Standard_Real U0, const Standard_Real Ui, const Standard_Real Tol)
	the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0>. <Ui> is the starting value used in the iterative process which find the solution, it must be close to the final solution More...

Standard_Boolean	IsDone () const
	True if the computation was successful, False otherwise. IsDone is a protection against: More...

Standard_Real	Parameter () const
	Returns the parameter on the curve of the point solution of this algorithm. Exceptions StdFail_NotDone if the computation was not successful, or was not done. More...

Static Public Member Functions
static Standard_Real	Length (const Adaptor3d_Curve &C)
	Computes the length of the Curve `.` More...

static Standard_Real	Length (const Adaptor2d_Curve2d &C)
	Computes the length of the Curve `.` More...

static Standard_Real	Length (const Adaptor3d_Curve &C, const Standard_Real Tol)
	Computes the length of the Curve `with the given tolerance.` More...

static Standard_Real	Length (const Adaptor2d_Curve2d &C, const Standard_Real Tol)
	Computes the length of the Curve `with the given tolerance.` More...

static Standard_Real	Length (const Adaptor3d_Curve &C, const Standard_Real U1, const Standard_Real U2)
	Computes the length of the Curve `.` More...

static Standard_Real	Length (const Adaptor2d_Curve2d &C, const Standard_Real U1, const Standard_Real U2)
	Computes the length of the Curve `.` More...

static Standard_Real	Length (const Adaptor3d_Curve &C, const Standard_Real U1, const Standard_Real U2, const Standard_Real Tol)
	Computes the length of the Curve `with the given tolerance.` More...

static Standard_Real	Length (const Adaptor2d_Curve2d &C, const Standard_Real U1, const Standard_Real U2, const Standard_Real Tol)
	Computes the length of the Curve `with the given tolerance. Constructs an empty algorithm. This function is used only for initializing a framework to compute the length of a curve (or a series of curves). Warning The function IsDone will return the value false after the use of this function.` More...

Detailed Description

Provides an algorithm to compute a point on a curve situated at a given distance from another point on the curve, the distance being measured along the curve (curvilinear abscissa on the curve). This algorithm is also used to compute the length of a curve. An AbscissaPoint object provides a framework for:

defining the point to compute
implementing the construction algorithm
consulting the result.

Constructor & Destructor Documentation

GCPnts_AbscissaPoint::GCPnts_AbscissaPoint ( )

GCPnts_AbscissaPoint::GCPnts_AbscissaPoint	(	const Adaptor3d_Curve &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	U0
	)

the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0>.

GCPnts_AbscissaPoint::GCPnts_AbscissaPoint	(	const Standard_Real	Tol,
		const Adaptor3d_Curve &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	U0
	)

the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0> with the given tolerance.

GCPnts_AbscissaPoint::GCPnts_AbscissaPoint	(	const Standard_Real	Tol,
		const Adaptor2d_Curve2d &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	U0
	)

the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0> with the given tolerance.

GCPnts_AbscissaPoint::GCPnts_AbscissaPoint	(	const Adaptor2d_Curve2d &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	U0
	)

the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0>.

GCPnts_AbscissaPoint::GCPnts_AbscissaPoint	(	const Adaptor3d_Curve &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	U0,
		const Standard_Real	Ui
	)

the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0>. <Ui> is the starting value used in the iterative process which find the solution, it must be close to the final solution

GCPnts_AbscissaPoint::GCPnts_AbscissaPoint	(	const Adaptor2d_Curve2d &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	U0,
		const Standard_Real	Ui
	)

the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0>. <Ui> is the starting value used in the iterative process which find the solution, it must be closed to the final solution

GCPnts_AbscissaPoint::GCPnts_AbscissaPoint	(	const Adaptor3d_Curve &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	U0,
		const Standard_Real	Ui,
		const Standard_Real	Tol
	)

the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0>. <Ui> is the starting value used in the iterative process which find the solution, it must be close to the final solution

GCPnts_AbscissaPoint::GCPnts_AbscissaPoint	(	const Adaptor2d_Curve2d &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	U0,
		const Standard_Real	Ui,
		const Standard_Real	Tol
	)

the algorithm computes a point on a curve <Curve> at the distance <Abscissa> from the point of parameter <U0>. <Ui> is the starting value used in the iterative process which find the solution, it must be close to the final solution

Member Function Documentation

Standard_Boolean GCPnts_AbscissaPoint::IsDone ( ) const

True if the computation was successful, False otherwise. IsDone is a protection against:

non-convergence of the algorithm
querying the results before computation.

static Standard_Real GCPnts_AbscissaPoint::Length ( const Adaptor3d_Curve & C )

static

Computes the length of the Curve .

static Standard_Real GCPnts_AbscissaPoint::Length ( const Adaptor2d_Curve2d & C )

static

Computes the length of the Curve .

static Standard_Real GCPnts_AbscissaPoint::Length	(	const Adaptor3d_Curve &	C,
		const Standard_Real	Tol
	)

static

Computes the length of the Curve with the given tolerance.

static Standard_Real GCPnts_AbscissaPoint::Length	(	const Adaptor2d_Curve2d &	C,
		const Standard_Real	Tol
	)

static

Computes the length of the Curve with the given tolerance.

static Standard_Real GCPnts_AbscissaPoint::Length	(	const Adaptor3d_Curve &	C,
		const Standard_Real	U1,
		const Standard_Real	U2
	)

static

Computes the length of the Curve .

static Standard_Real GCPnts_AbscissaPoint::Length	(	const Adaptor2d_Curve2d &	C,
		const Standard_Real	U1,
		const Standard_Real	U2
	)

static

Computes the length of the Curve .

static Standard_Real GCPnts_AbscissaPoint::Length	(	const Adaptor3d_Curve &	C,
		const Standard_Real	U1,
		const Standard_Real	U2,
		const Standard_Real	Tol
	)

static

Computes the length of the Curve with the given tolerance.

static Standard_Real GCPnts_AbscissaPoint::Length	(	const Adaptor2d_Curve2d &	C,
		const Standard_Real	U1,
		const Standard_Real	U2,
		const Standard_Real	Tol
	)

static

Computes the length of the Curve with the given tolerance. Constructs an empty algorithm. This function is used only for initializing a framework to compute the length of a curve (or a series of curves). Warning The function IsDone will return the value false after the use of this function.

Standard_Real GCPnts_AbscissaPoint::Parameter ( ) const

Returns the parameter on the curve of the point solution of this algorithm. Exceptions StdFail_NotDone if the computation was not successful, or was not done.

The documentation for this class was generated from the following file:

GCPnts_AbscissaPoint.hxx

GCPnts_AbscissaPoint Class Reference

Public Member Functions

Static Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation