#include <GeomInt_IntSS.hxx>

Public Member Functions
	GeomInt_IntSS ()

	GeomInt_IntSS (const Handle< Geom_Surface > &S1, const Handle< Geom_Surface > &S2, const Standard_Real Tol, const Standard_Boolean Approx=Standard_True, const Standard_Boolean ApproxS1=Standard_False, const Standard_Boolean ApproxS2=Standard_False)
	performs general intersection of two surfaces just now More...

void	Perform (const Handle< Geom_Surface > &S1, const Handle< Geom_Surface > &S2, const Standard_Real Tol, const Standard_Boolean Approx=Standard_True, const Standard_Boolean ApproxS1=Standard_False, const Standard_Boolean ApproxS2=Standard_False)
	general intersection of two surfaces More...

void	Perform (const Handle< GeomAdaptor_HSurface > &HS1, const Handle< GeomAdaptor_HSurface > &HS2, const Standard_Real Tol, const Standard_Boolean Approx=Standard_True, const Standard_Boolean ApproxS1=Standard_False, const Standard_Boolean ApproxS2=Standard_False)
	intersection of adapted surfaces More...

void	Perform (const Handle< Geom_Surface > &S1, const Handle< Geom_Surface > &S2, const Standard_Real Tol, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2, const Standard_Boolean Approx=Standard_True, const Standard_Boolean ApproxS1=Standard_False, const Standard_Boolean ApproxS2=Standard_False)
	general intersection using a starting point More...

void	Perform (const Handle< GeomAdaptor_HSurface > &HS1, const Handle< GeomAdaptor_HSurface > &HS2, const Standard_Real Tol, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2, const Standard_Boolean Approx=Standard_True, const Standard_Boolean ApproxS1=Standard_False, const Standard_Boolean ApproxS2=Standard_False)
	intersection of adapted surfaces using a starting point More...

Standard_Boolean	IsDone () const

Standard_Real	TolReached3d () const

Standard_Real	TolReached2d () const

Standard_Integer	NbLines () const

const Handle< Geom_Curve > &	Line (const Standard_Integer Index) const

Standard_Boolean	HasLineOnS1 (const Standard_Integer Index) const

const Handle< Geom2d_Curve > &	LineOnS1 (const Standard_Integer Index) const

Standard_Boolean	HasLineOnS2 (const Standard_Integer Index) const

const Handle< Geom2d_Curve > &	LineOnS2 (const Standard_Integer Index) const

Standard_Integer	NbBoundaries () const

const Handle< Geom_Curve > &	Boundary (const Standard_Integer Index) const

Standard_Integer	NbPoints () const

gp_Pnt	Point (const Standard_Integer Index) const

gp_Pnt2d	Pnt2d (const Standard_Integer Index, const Standard_Boolean OnFirst) const

void	SetTolFixTangents (const Standard_Real aTolCheck, const Standard_Real aTolAngCheck)

void	TolFixTangents (Standard_Real &aTolCheck, Standard_Real &aTolAngCheck)

Static Public Member Functions
static void	TreatRLine (const Handle< IntPatch_RLine > &theRL, const Handle< GeomAdaptor_HSurface > &theHS1, const Handle< GeomAdaptor_HSurface > &theHS2, Handle< Geom_Curve > &theC3d, Handle< Geom2d_Curve > &theC2d1, Handle< Geom2d_Curve > &theC2d2, Standard_Real &theTolReached)
	converts RLine to Geom(2d)_Curve. More...

static void	BuildPCurves (const Standard_Real f, const Standard_Real l, Standard_Real &Tol, const Handle< Geom_Surface > &S, const Handle< Geom_Curve > &C, Handle< Geom2d_Curve > &C2d)
	creates 2D-curve on given surface from given 3D-curve More...

static void	TrimILineOnSurfBoundaries (const Handle< Geom2d_Curve > &theC2d1, const Handle< Geom2d_Curve > &theC2d2, const Bnd_Box2d &theBound1, const Bnd_Box2d &theBound2, GeomInt_VectorOfReal &theArrayOfParameters)
	puts into theArrayOfParameters the parameters of intersection points of given theC2d1 and theC2d2 curves with the boundaries of the source surface. More...

static Handle< Geom_Curve >	MakeBSpline (const Handle< IntPatch_WLine > &WL, const Standard_Integer ideb, const Standard_Integer ifin)

static Handle< Geom2d_BSplineCurve >	MakeBSpline2d (const Handle< IntPatch_WLine > &theWLine, const Standard_Integer ideb, const Standard_Integer ifin, const Standard_Boolean onFirst)

Protected Member Functions
void	InternalPerform (const Standard_Real Tol, const Standard_Boolean Approx, const Standard_Boolean ApproxS1, const Standard_Boolean ApproxS2, const Standard_Boolean useStart, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2)

void	MakeCurve (const Standard_Integer Ind, const Handle< Adaptor3d_TopolTool > &D1, const Handle< Adaptor3d_TopolTool > &D2, const Standard_Real Tol, const Standard_Boolean Approx, const Standard_Boolean Approx1, const Standard_Boolean Approx2)

Constructor & Destructor Documentation

GeomInt_IntSS::GeomInt_IntSS ( )

GeomInt_IntSS::GeomInt_IntSS	(	const Handle< Geom_Surface > &	S1,
		const Handle< Geom_Surface > &	S2,
		const Standard_Real	Tol,
		const Standard_Boolean	Approx = `Standard_True`,
		const Standard_Boolean	ApproxS1 = `Standard_False`,
		const Standard_Boolean	ApproxS2 = `Standard_False`
	)

performs general intersection of two surfaces just now

Member Function Documentation

const Handle< Geom_Curve >& GeomInt_IntSS::Boundary ( const Standard_Integer Index ) const

static void GeomInt_IntSS::BuildPCurves	(	const Standard_Real	f,
		const Standard_Real	l,
		Standard_Real &	Tol,
		const Handle< Geom_Surface > &	S,
		const Handle< Geom_Curve > &	C,
		Handle< Geom2d_Curve > &	C2d
	)

static

creates 2D-curve on given surface from given 3D-curve

Standard_Boolean GeomInt_IntSS::HasLineOnS1 ( const Standard_Integer Index ) const

Standard_Boolean GeomInt_IntSS::HasLineOnS2 ( const Standard_Integer Index ) const

void GeomInt_IntSS::InternalPerform	(	const Standard_Real	Tol,
		const Standard_Boolean	Approx,
		const Standard_Boolean	ApproxS1,
		const Standard_Boolean	ApproxS2,
		const Standard_Boolean	useStart,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2
	)

protected

Standard_Boolean GeomInt_IntSS::IsDone ( ) const

const Handle< Geom_Curve >& GeomInt_IntSS::Line ( const Standard_Integer Index ) const

const Handle< Geom2d_Curve >& GeomInt_IntSS::LineOnS1 ( const Standard_Integer Index ) const

const Handle< Geom2d_Curve >& GeomInt_IntSS::LineOnS2 ( const Standard_Integer Index ) const

static Handle< Geom_Curve > GeomInt_IntSS::MakeBSpline	(	const Handle< IntPatch_WLine > &	WL,
		const Standard_Integer	ideb,
		const Standard_Integer	ifin
	)

static

static Handle< Geom2d_BSplineCurve > GeomInt_IntSS::MakeBSpline2d	(	const Handle< IntPatch_WLine > &	theWLine,
		const Standard_Integer	ideb,
		const Standard_Integer	ifin,
		const Standard_Boolean	onFirst
	)

static

void GeomInt_IntSS::MakeCurve	(	const Standard_Integer	Ind,
		const Handle< Adaptor3d_TopolTool > &	D1,
		const Handle< Adaptor3d_TopolTool > &	D2,
		const Standard_Real	Tol,
		const Standard_Boolean	Approx,
		const Standard_Boolean	Approx1,
		const Standard_Boolean	Approx2
	)

protected

Standard_Integer GeomInt_IntSS::NbBoundaries ( ) const

Standard_Integer GeomInt_IntSS::NbLines ( ) const

Standard_Integer GeomInt_IntSS::NbPoints ( ) const

void GeomInt_IntSS::Perform	(	const Handle< Geom_Surface > &	S1,
		const Handle< Geom_Surface > &	S2,
		const Standard_Real	Tol,
		const Standard_Boolean	Approx = `Standard_True`,
		const Standard_Boolean	ApproxS1 = `Standard_False`,
		const Standard_Boolean	ApproxS2 = `Standard_False`
	)

general intersection of two surfaces

void GeomInt_IntSS::Perform	(	const Handle< GeomAdaptor_HSurface > &	HS1,
		const Handle< GeomAdaptor_HSurface > &	HS2,
		const Standard_Real	Tol,
		const Standard_Boolean	Approx = `Standard_True`,
		const Standard_Boolean	ApproxS1 = `Standard_False`,
		const Standard_Boolean	ApproxS2 = `Standard_False`
	)

intersection of adapted surfaces

void GeomInt_IntSS::Perform	(	const Handle< Geom_Surface > &	S1,
		const Handle< Geom_Surface > &	S2,
		const Standard_Real	Tol,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2,
		const Standard_Boolean	Approx = `Standard_True`,
		const Standard_Boolean	ApproxS1 = `Standard_False`,
		const Standard_Boolean	ApproxS2 = `Standard_False`
	)

general intersection using a starting point

void GeomInt_IntSS::Perform	(	const Handle< GeomAdaptor_HSurface > &	HS1,
		const Handle< GeomAdaptor_HSurface > &	HS2,
		const Standard_Real	Tol,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2,
		const Standard_Boolean	Approx = `Standard_True`,
		const Standard_Boolean	ApproxS1 = `Standard_False`,
		const Standard_Boolean	ApproxS2 = `Standard_False`
	)

intersection of adapted surfaces using a starting point

gp_Pnt2d GeomInt_IntSS::Pnt2d	(	const Standard_Integer	Index,
		const Standard_Boolean	OnFirst
	)		const

gp_Pnt GeomInt_IntSS::Point ( const Standard_Integer Index ) const

void GeomInt_IntSS::SetTolFixTangents	(	const Standard_Real	aTolCheck,
		const Standard_Real	aTolAngCheck
	)

void GeomInt_IntSS::TolFixTangents	(	Standard_Real &	aTolCheck,
		Standard_Real &	aTolAngCheck
	)

Standard_Real GeomInt_IntSS::TolReached2d ( ) const

Standard_Real GeomInt_IntSS::TolReached3d ( ) const

static void GeomInt_IntSS::TreatRLine	(	const Handle< IntPatch_RLine > &	theRL,
		const Handle< GeomAdaptor_HSurface > &	theHS1,
		const Handle< GeomAdaptor_HSurface > &	theHS2,
		Handle< Geom_Curve > &	theC3d,
		Handle< Geom2d_Curve > &	theC2d1,
		Handle< Geom2d_Curve > &	theC2d2,
		Standard_Real &	theTolReached
	)

static

converts RLine to Geom(2d)_Curve.

static void GeomInt_IntSS::TrimILineOnSurfBoundaries	(	const Handle< Geom2d_Curve > &	theC2d1,
		const Handle< Geom2d_Curve > &	theC2d2,
		const Bnd_Box2d &	theBound1,
		const Bnd_Box2d &	theBound2,
		GeomInt_VectorOfReal &	theArrayOfParameters
	)

static

puts into theArrayOfParameters the parameters of intersection points of given theC2d1 and theC2d2 curves with the boundaries of the source surface.

The documentation for this class was generated from the following file:

GeomInt_IntSS.hxx

GeomInt_IntSS Class Reference

Public Member Functions

Static Public Member Functions

Protected Member Functions

Constructor & Destructor Documentation

Member Function Documentation