Open CASCADE Technology
7.1.0.beta

NSide Filling This algorithm avoids to build a face from: More...
#include <BRepFill_Filling.hxx>
Public Member Functions  
BRepFill_Filling (const Standard_Integer Degree=3, const Standard_Integer NbPtsOnCur=15, const Standard_Integer NbIter=2, const Standard_Boolean Anisotropie=Standard_False, const Standard_Real Tol2d=0.00001, const Standard_Real Tol3d=0.0001, const Standard_Real TolAng=0.01, const Standard_Real TolCurv=0.1, const Standard_Integer MaxDeg=8, const Standard_Integer MaxSegments=9)  
Constructor. More...  
void  SetConstrParam (const Standard_Real Tol2d=0.00001, const Standard_Real Tol3d=0.0001, const Standard_Real TolAng=0.01, const Standard_Real TolCurv=0.1) 
Sets the values of Tolerances used to control the constraint. Tol2d: Tol3d: it is the maximum distance allowed between the support surface and the constraints TolAng: it is the maximum angle allowed between the normal of the surface and the constraints TolCurv: it is the maximum difference of curvature allowed between the surface and the constraint. More...  
void  SetResolParam (const Standard_Integer Degree=3, const Standard_Integer NbPtsOnCur=15, const Standard_Integer NbIter=2, const Standard_Boolean Anisotropie=Standard_False) 
Sets the parameters used for resolution. The default values of these parameters have been chosen for a good ratio quality/performance. Degree: it is the order of energy criterion to minimize for computing the deformation of the surface. The default value is 3 The recommanded value is i+2 where i is the maximum order of the constraints. NbPtsOnCur: it is the average number of points for discretisation of the edges. NbIter: it is the maximum number of iterations of the process. For each iteration the number of discretisation points is increased. Anisotropie: More...  
void  SetApproxParam (const Standard_Integer MaxDeg=8, const Standard_Integer MaxSegments=9) 
Sets the parameters used for approximation of the surface. More...  
void  LoadInitSurface (const TopoDS_Face &aFace) 
Loads the initial Surface The initial surface must have orthogonal local coordinates, i.e. partial derivatives dS/du and dS/dv must be orthogonal at each point of surface. If this condition breaks, distortions of resulting surface are possible. More...  
Standard_Integer  Add (const TopoDS_Edge &anEdge, const GeomAbs_Shape Order, const Standard_Boolean IsBound=Standard_True) 
Adds a new constraint which also defines an edge of the wire of the face Order: Order of the constraint: GeomAbs_C0 : the surface has to pass by 3D representation of the edge GeomAbs_G1 : the surface has to pass by 3D representation of the edge and to respect tangency with the first face of the edge GeomAbs_G2 : the surface has to pass by 3D representation of the edge and to respect tangency and curvature with the first face of the edge. More...  
Standard_Integer  Add (const TopoDS_Edge &anEdge, const TopoDS_Face &Support, const GeomAbs_Shape Order, const Standard_Boolean IsBound=Standard_True) 
Adds a new constraint which also defines an edge of the wire of the face Order: Order of the constraint: GeomAbs_C0 : the surface has to pass by 3D representation of the edge GeomAbs_G1 : the surface has to pass by 3D representation of the edge and to respect tangency with the given face GeomAbs_G2 : the surface has to pass by 3D representation of the edge and to respect tangency and curvature with the given face. More...  
Standard_Integer  Add (const TopoDS_Face &Support, const GeomAbs_Shape Order) 
Adds a free constraint on a face. The corresponding edge has to be automatically recomputed. It is always a bound. More...  
Standard_Integer  Add (const gp_Pnt &Point) 
Adds a punctual constraint. More...  
Standard_Integer  Add (const Standard_Real U, const Standard_Real V, const TopoDS_Face &Support, const GeomAbs_Shape Order) 
Adds a punctual constraint. More...  
void  Build () 
Builds the resulting faces. More...  
Standard_Boolean  IsDone () const 
TopoDS_Face  Face () const 
const TopTools_ListOfShape &  Generated (const TopoDS_Shape &S) 
Returns the list of shapes generated from the shape <S>. More...  
Standard_Real  G0Error () const 
Standard_Real  G1Error () const 
Standard_Real  G2Error () const 
Standard_Real  G0Error (const Standard_Integer Index) 
Standard_Real  G1Error (const Standard_Integer Index) 
Standard_Real  G2Error (const Standard_Integer Index) 
NSide Filling This algorithm avoids to build a face from:
The support surface of the face is computed by deformation of the initial surface in order to satisfy the given constraints. The set of bounding edges defines the wire of the face.
If no initial surface is given, the algorithm computes it automatically. If the set of edges is not connected (Free constraint) missing edges are automatically computed.
Limitations:
Other Applications:
BRepFill_Filling::BRepFill_Filling  (  const Standard_Integer  Degree = 3 , 
const Standard_Integer  NbPtsOnCur = 15 , 

const Standard_Integer  NbIter = 2 , 

const Standard_Boolean  Anisotropie = Standard_False , 

const Standard_Real  Tol2d = 0.00001 , 

const Standard_Real  Tol3d = 0.0001 , 

const Standard_Real  TolAng = 0.01 , 

const Standard_Real  TolCurv = 0.1 , 

const Standard_Integer  MaxDeg = 8 , 

const Standard_Integer  MaxSegments = 9 

) 
Constructor.
Standard_Integer BRepFill_Filling::Add  (  const TopoDS_Edge &  anEdge, 
const GeomAbs_Shape  Order,  
const Standard_Boolean  IsBound = Standard_True 

) 
Adds a new constraint which also defines an edge of the wire of the face Order: Order of the constraint: GeomAbs_C0 : the surface has to pass by 3D representation of the edge GeomAbs_G1 : the surface has to pass by 3D representation of the edge and to respect tangency with the first face of the edge GeomAbs_G2 : the surface has to pass by 3D representation of the edge and to respect tangency and curvature with the first face of the edge.
Standard_Integer BRepFill_Filling::Add  (  const TopoDS_Edge &  anEdge, 
const TopoDS_Face &  Support,  
const GeomAbs_Shape  Order,  
const Standard_Boolean  IsBound = Standard_True 

) 
Adds a new constraint which also defines an edge of the wire of the face Order: Order of the constraint: GeomAbs_C0 : the surface has to pass by 3D representation of the edge GeomAbs_G1 : the surface has to pass by 3D representation of the edge and to respect tangency with the given face GeomAbs_G2 : the surface has to pass by 3D representation of the edge and to respect tangency and curvature with the given face.
Standard_Integer BRepFill_Filling::Add  (  const TopoDS_Face &  Support, 
const GeomAbs_Shape  Order  
) 
Adds a free constraint on a face. The corresponding edge has to be automatically recomputed. It is always a bound.
Standard_Integer BRepFill_Filling::Add  (  const gp_Pnt &  Point  ) 
Adds a punctual constraint.
Standard_Integer BRepFill_Filling::Add  (  const Standard_Real  U, 
const Standard_Real  V,  
const TopoDS_Face &  Support,  
const GeomAbs_Shape  Order  
) 
Adds a punctual constraint.
void BRepFill_Filling::Build  (  ) 
Builds the resulting faces.
TopoDS_Face BRepFill_Filling::Face  (  )  const 
Standard_Real BRepFill_Filling::G0Error  (  )  const 
Standard_Real BRepFill_Filling::G0Error  (  const Standard_Integer  Index  ) 
Standard_Real BRepFill_Filling::G1Error  (  )  const 
Standard_Real BRepFill_Filling::G1Error  (  const Standard_Integer  Index  ) 
Standard_Real BRepFill_Filling::G2Error  (  )  const 
Standard_Real BRepFill_Filling::G2Error  (  const Standard_Integer  Index  ) 
const TopTools_ListOfShape& BRepFill_Filling::Generated  (  const TopoDS_Shape &  S  ) 
Returns the list of shapes generated from the shape <S>.
Standard_Boolean BRepFill_Filling::IsDone  (  )  const 
void BRepFill_Filling::LoadInitSurface  (  const TopoDS_Face &  aFace  ) 
Loads the initial Surface The initial surface must have orthogonal local coordinates, i.e. partial derivatives dS/du and dS/dv must be orthogonal at each point of surface. If this condition breaks, distortions of resulting surface are possible.
void BRepFill_Filling::SetApproxParam  (  const Standard_Integer  MaxDeg = 8 , 
const Standard_Integer  MaxSegments = 9 

) 
Sets the parameters used for approximation of the surface.
void BRepFill_Filling::SetConstrParam  (  const Standard_Real  Tol2d = 0.00001 , 
const Standard_Real  Tol3d = 0.0001 , 

const Standard_Real  TolAng = 0.01 , 

const Standard_Real  TolCurv = 0.1 

) 
Sets the values of Tolerances used to control the constraint. Tol2d: Tol3d: it is the maximum distance allowed between the support surface and the constraints TolAng: it is the maximum angle allowed between the normal of the surface and the constraints TolCurv: it is the maximum difference of curvature allowed between the surface and the constraint.
void BRepFill_Filling::SetResolParam  (  const Standard_Integer  Degree = 3 , 
const Standard_Integer  NbPtsOnCur = 15 , 

const Standard_Integer  NbIter = 2 , 

const Standard_Boolean  Anisotropie = Standard_False 

) 
Sets the parameters used for resolution. The default values of these parameters have been chosen for a good ratio quality/performance. Degree: it is the order of energy criterion to minimize for computing the deformation of the surface. The default value is 3 The recommanded value is i+2 where i is the maximum order of the constraints. NbPtsOnCur: it is the average number of points for discretisation of the edges. NbIter: it is the maximum number of iterations of the process. For each iteration the number of discretisation points is increased. Anisotropie: