LocOpe_SplitDrafts Class Reference

This class provides a tool to realize the following operations on a shape : More...

#include <LocOpe_SplitDrafts.hxx>

Public Member Functions
	LocOpe_SplitDrafts ()
	Empty constructor. More...
	LocOpe_SplitDrafts (const TopoDS_Shape &S)
	Creates the algoritm on the shape <S>. More...
void	Init (const TopoDS_Shape &S)
	Initializes the algoritm with the shape <S>. More...
void	Perform (const TopoDS_Face &F, const TopoDS_Wire &W, const gp_Dir &Extractg, const gp_Pln &NPlg, const Standard_Real Angleg, const gp_Dir &Extractd, const gp_Pln &NPld, const Standard_Real Angled, const Standard_Boolean ModifyLeft=Standard_True, const Standard_Boolean ModifyRight=Standard_True)
	Splits the face <F> of the former given shape with the wire <W>. The wire is assumed to lie on the face. Puts a draft angle on both parts of the wire. <Extractg>, <Nplg>, <Angleg> define the arguments for the left part of the wire. <Extractd>, <Npld>, <Angled> define the arguments for the right part of the wire. The draft angle is measured with the direction <Extract>. <Npl> defines the neutral plane (points belonging to the neutral plane are not modified). <Angle> is the value of the draft angle. If <ModifyLeft> is set to <Standard_False>, no draft angle is applied to the left part of the wire. If <ModifyRight> is set to <Standard_False>,no draft angle is applied to the right part of the wire. More...
void	Perform (const TopoDS_Face &F, const TopoDS_Wire &W, const gp_Dir &Extract, const gp_Pln &NPl, const Standard_Real Angle)
	Splits the face <F> of the former given shape with the wire <W>. The wire is assumed to lie on the face. Puts a draft angle on the left part of the wire. The draft angle is measured with the direction <Extract>. <Npl> defines the neutral plane (points belonging to the neutral plane are not modified). <Angle> is the value of the draft angle. More...
Standard_Boolean	IsDone () const
	Returns <Standard_True> if the modification has been succesfully performed. More...
const TopoDS_Shape &	OriginalShape () const
const TopoDS_Shape &	Shape () const
	Returns the modified shape. More...
const TopTools_ListOfShape &	ShapesFromShape (const TopoDS_Shape &S) const
	Manages the descendant shapes. More...

Detailed Description

This class provides a tool to realize the following operations on a shape :

• split a face of the shape with a wire,
• put draft angle on both side of the wire. For each side, the draft angle may be different.

Constructor & Destructor Documentation

LocOpe_SplitDrafts::LocOpe_SplitDrafts

(

)

Empty constructor.

LocOpe_SplitDrafts::LocOpe_SplitDrafts

(

const TopoDS_Shape &

S

)

Creates the algoritm on the shape <S>.

Member Function Documentation

void LocOpe_SplitDrafts::Init

(

const TopoDS_Shape &

S

)

Initializes the algoritm with the shape <S>.

Standard_Boolean LocOpe_SplitDrafts::IsDone

(

)

const

Returns <Standard_True> if the modification has been succesfully performed.

const TopoDS_Shape& LocOpe_SplitDrafts::OriginalShape

(

)

const

void LocOpe_SplitDrafts::Perform	(	const TopoDS_Face &	F,
		const TopoDS_Wire &	W,
		const gp_Dir &	Extractg,
		const gp_Pln &	NPlg,
		const Standard_Real	Angleg,
		const gp_Dir &	Extractd,
		const gp_Pln &	NPld,
		const Standard_Real	Angled,
		const Standard_Boolean	ModifyLeft = Standard_True,
		const Standard_Boolean	ModifyRight = Standard_True
	)

Splits the face <F> of the former given shape with the wire <W>. The wire is assumed to lie on the face. Puts a draft angle on both parts of the wire. <Extractg>, <Nplg>, <Angleg> define the arguments for the left part of the wire. <Extractd>, <Npld>, <Angled> define the arguments for the right part of the wire. The draft angle is measured with the direction <Extract>. <Npl> defines the neutral plane (points belonging to the neutral plane are not modified). <Angle> is the value of the draft angle. If <ModifyLeft> is set to <Standard_False>, no draft angle is applied to the left part of the wire. If <ModifyRight> is set to <Standard_False>,no draft angle is applied to the right part of the wire.

void LocOpe_SplitDrafts::Perform	(	const TopoDS_Face &	F,
		const TopoDS_Wire &	W,
		const gp_Dir &	Extract,
		const gp_Pln &	NPl,
		const Standard_Real	Angle
	)

Splits the face <F> of the former given shape with the wire <W>. The wire is assumed to lie on the face. Puts a draft angle on the left part of the wire. The draft angle is measured with the direction <Extract>. <Npl> defines the neutral plane (points belonging to the neutral plane are not modified). <Angle> is the value of the draft angle.

const TopoDS_Shape& LocOpe_SplitDrafts::Shape

(

)

const

Returns the modified shape.

const TopTools_ListOfShape& LocOpe_SplitDrafts::ShapesFromShape

(

const TopoDS_Shape &

S

)

const

Manages the descendant shapes.

---

The documentation for this class was generated from the following file:

• LocOpe_SplitDrafts.hxx