TopOpeBRepTool_GeomTool Class Reference

#include <TopOpeBRepTool_GeomTool.hxx>

Public Member Functions
	TopOpeBRepTool_GeomTool (const TopOpeBRepTool_OutCurveType TypeC3D=TopOpeBRepTool_BSPLINE1, const Standard_Boolean CompC3D=Standard_True, const Standard_Boolean CompPC1=Standard_True, const Standard_Boolean CompPC2=Standard_True)
	Boolean flags <CompC3D>, <CompPC1>, <CompPC2> indicate whether the corresponding result curves <C3D>, <PC1>, <PC2> of MakeCurves method must or not be computed from an intersection line <L>. When the line <L> is a walking one, <TypeC3D> is the kind of the 3D curve <C3D> to compute : More...
void	Define (const TopOpeBRepTool_OutCurveType TypeC3D, const Standard_Boolean CompC3D, const Standard_Boolean CompPC1, const Standard_Boolean CompPC2)
void	Define (const TopOpeBRepTool_OutCurveType TypeC3D)
void	DefineCurves (const Standard_Boolean CompC3D)
void	DefinePCurves1 (const Standard_Boolean CompPC1)
void	DefinePCurves2 (const Standard_Boolean CompPC2)
void	Define (const TopOpeBRepTool_GeomTool &GT)
void	GetTolerances (Standard_Real &tol3d, Standard_Real &tol2d) const
void	SetTolerances (const Standard_Real tol3d, const Standard_Real tol2d)
Standard_Integer	NbPntMax () const
void	SetNbPntMax (const Standard_Integer NbPntMax)
TopOpeBRepTool_OutCurveType	TypeC3D () const
Standard_Boolean	CompC3D () const
Standard_Boolean	CompPC1 () const
Standard_Boolean	CompPC2 () const

Protected Attributes
TopOpeBRepTool_OutCurveType	myTypeC3D
Standard_Boolean	myCompC3D
Standard_Boolean	myCompPC1
Standard_Boolean	myCompPC2

Constructor & Destructor Documentation

TopOpeBRepTool_GeomTool::TopOpeBRepTool_GeomTool	(	const TopOpeBRepTool_OutCurveType	TypeC3D = TopOpeBRepTool_BSPLINE1,
		const Standard_Boolean	CompC3D = Standard_True,
		const Standard_Boolean	CompPC1 = Standard_True,
		const Standard_Boolean	CompPC2 = Standard_True
	)

Boolean flags <CompC3D>, <CompPC1>, <CompPC2> indicate whether the corresponding result curves <C3D>, <PC1>, <PC2> of MakeCurves method must or not be computed from an intersection line <L>. When the line <L> is a walking one, <TypeC3D> is the kind of the 3D curve <C3D> to compute :

• BSPLINE1 to compute a BSpline of degree 1 on the walking points of <L>,
• APPROX to build an approximation curve on the walking points of <L>.

Member Function Documentation

Standard_Boolean TopOpeBRepTool_GeomTool::CompC3D

(

)

const

Standard_Boolean TopOpeBRepTool_GeomTool::CompPC1

(

)

const

Standard_Boolean TopOpeBRepTool_GeomTool::CompPC2

(

)

const

void TopOpeBRepTool_GeomTool::Define	(	const TopOpeBRepTool_OutCurveType	TypeC3D,
		const Standard_Boolean	CompC3D,
		const Standard_Boolean	CompPC1,
		const Standard_Boolean	CompPC2
	)

void TopOpeBRepTool_GeomTool::Define

(

const TopOpeBRepTool_OutCurveType

TypeC3D

)

void TopOpeBRepTool_GeomTool::Define

(

const TopOpeBRepTool_GeomTool &

GT

)

void TopOpeBRepTool_GeomTool::DefineCurves

(

const Standard_Boolean

CompC3D

)

void TopOpeBRepTool_GeomTool::DefinePCurves1

(

const Standard_Boolean

CompPC1

)

void TopOpeBRepTool_GeomTool::DefinePCurves2

(

const Standard_Boolean

CompPC2

)

void TopOpeBRepTool_GeomTool::GetTolerances	(	Standard_Real &	tol3d,
		Standard_Real &	tol2d
	)		const

Standard_Integer TopOpeBRepTool_GeomTool::NbPntMax

(

)

const

void TopOpeBRepTool_GeomTool::SetNbPntMax

(

const Standard_Integer

NbPntMax

)

void TopOpeBRepTool_GeomTool::SetTolerances	(	const Standard_Real	tol3d,
		const Standard_Real	tol2d
	)

TopOpeBRepTool_OutCurveType TopOpeBRepTool_GeomTool::TypeC3D

(

)

const

Field Documentation

Standard_Boolean TopOpeBRepTool_GeomTool::myCompC3D

protected

Standard_Boolean TopOpeBRepTool_GeomTool::myCompPC1

protected

Standard_Boolean TopOpeBRepTool_GeomTool::myCompPC2

protected

TopOpeBRepTool_OutCurveType TopOpeBRepTool_GeomTool::myTypeC3D

protected

---

The documentation for this class was generated from the following file:

• TopOpeBRepTool_GeomTool.hxx