Open CASCADE Technology
7.1.0.beta

This class implements the following algorithms used to create a Cone from gp. More...
#include <gce_MakeCone.hxx>
Public Member Functions  
gce_MakeCone (const gp_Ax2 &A2, const Standard_Real Ang, const Standard_Real Radius)  
Creates an infinite conical surface. A2 locates the cone in the space and defines the reference plane of the surface. Ang is the conical surface semiangle between 0 and PI/2 radians. Radius is the radius of the circle in the reference plane of the cone. If Radius is lower than 0.0 the status is " If Ang < Resolution from gp or Ang >= (PI/2)  Resolution. More...  
gce_MakeCone (const gp_Cone &Cone, const gp_Pnt &Point)  
Makes a Cone from gp <TheCone> coaxial to another Cone <Cone> and passing through a Pnt <Point>. More...  
gce_MakeCone (const gp_Cone &Cone, const Standard_Real Dist)  
Makes a Cone from gp <TheCone> coaxial to another Cone <Cone> at the distance <Dist> which can be greater or lower than zero. More...  
gce_MakeCone (const gp_Pnt &P1, const gp_Pnt &P2, const gp_Pnt &P3, const gp_Pnt &P4)  
Makes a Cone from gp <TheCone> by four points <P1>, <P2>,<P3> and <P4>. Its axis is <P1P2> and the radius of its base is the distance between <P3> and <P1P2>. The distance between <P4> and <P1P2> is the radius of the section passing through <P4>. If <P1> and <P2> are confused or <P3> and <P4> are confused we have the status "ConfusedPoints" if <P1>,<P2>,<P3>,<P4> are colinear we have the status "ColinearPoints" If <P3P4> is perpendicular to <P1P2> we have the status "NullAngle". <P3P4> is colinear to <P1P2> we have the status "NullAngle". More...  
gce_MakeCone (const gp_Ax1 &Axis, const gp_Pnt &P1, const gp_Pnt &P2)  
Makes a Cone by its axis <Axis> and and two points. The distance between <P1> and the axis is the radius of the section passing through <P1>. The distance between <P2> and the axis is the radius of the section passing through <P2>. If <P1P2> is colinear to <Axis> we have the status "NullAngle" If <P3P4> is perpendicular to <Axis> we have the status "NullAngle" If <P1> and <P2> are confused we have the status "ConfusedPoints". More...  
gce_MakeCone (const gp_Lin &Axis, const gp_Pnt &P1, const gp_Pnt &P2)  
Makes a Cone by its axis <Axis> and and two points. The distance between <P1> and the axis is the radius of the section passing through <P1> The distance between <P2> and the axis is the radius of the section passing through <P2> If <P1P2> is colinear to <Axis> we have the status "NullAngle" If <P3P4> is perpendicular to <Axis> we have the status "NullAngle" If <P1> and <P2> are confused we have the status "ConfusedPoints". More...  
gce_MakeCone (const gp_Pnt &P1, const gp_Pnt &P2, const Standard_Real R1, const Standard_Real R2)  
Makes a Cone with two points and two radius. The axis of the solution is the line passing through <P1> and <P2>. <R1> is the radius of the section passing through <P1> and <R2> the radius of the section passing through <P2>. If <P1> and <P2> are confused we have the status "NullAxis". Warning If an error occurs (that is, when IsDone returns false), the Status function returns: More...  
const gp_Cone &  Value () const 
Returns the constructed cone. Exceptions StdFail_NotDone if no cone is constructed. More...  
const gp_Cone &  Operator () const 
operator gp_Cone () const  
Public Member Functions inherited from gce_Root  
Standard_Boolean  IsDone () const 
Returns true if the construction is successful. More...  
gce_ErrorType  Status () const 
Returns the status of the construction: More...  
Additional Inherited Members  
Protected Attributes inherited from gce_Root  
gce_ErrorType  TheError 
This class implements the following algorithms used to create a Cone from gp.
gce_MakeCone::gce_MakeCone  (  const gp_Ax2 &  A2, 
const Standard_Real  Ang,  
const Standard_Real  Radius  
) 
Creates an infinite conical surface. A2 locates the cone in the space and defines the reference plane of the surface. Ang is the conical surface semiangle between 0 and PI/2 radians. Radius is the radius of the circle in the reference plane of the cone. If Radius is lower than 0.0 the status is " If Ang < Resolution from gp or Ang >= (PI/2)  Resolution.
Makes a Cone from gp <TheCone> coaxial to another Cone <Cone> and passing through a Pnt <Point>.
gce_MakeCone::gce_MakeCone  (  const gp_Cone &  Cone, 
const Standard_Real  Dist  
) 
Makes a Cone from gp <TheCone> coaxial to another Cone <Cone> at the distance <Dist> which can be greater or lower than zero.
gce_MakeCone::gce_MakeCone  (  const gp_Pnt &  P1, 
const gp_Pnt &  P2,  
const gp_Pnt &  P3,  
const gp_Pnt &  P4  
) 
Makes a Cone from gp <TheCone> by four points <P1>, <P2>,<P3> and <P4>. Its axis is <P1P2> and the radius of its base is the distance between <P3> and <P1P2>. The distance between <P4> and <P1P2> is the radius of the section passing through <P4>. If <P1> and <P2> are confused or <P3> and <P4> are confused we have the status "ConfusedPoints" if <P1>,<P2>,<P3>,<P4> are colinear we have the status "ColinearPoints" If <P3P4> is perpendicular to <P1P2> we have the status "NullAngle". <P3P4> is colinear to <P1P2> we have the status "NullAngle".
Makes a Cone by its axis <Axis> and and two points. The distance between <P1> and the axis is the radius of the section passing through <P1>. The distance between <P2> and the axis is the radius of the section passing through <P2>. If <P1P2> is colinear to <Axis> we have the status "NullAngle" If <P3P4> is perpendicular to <Axis> we have the status "NullAngle" If <P1> and <P2> are confused we have the status "ConfusedPoints".
Makes a Cone by its axis <Axis> and and two points. The distance between <P1> and the axis is the radius of the section passing through <P1> The distance between <P2> and the axis is the radius of the section passing through <P2> If <P1P2> is colinear to <Axis> we have the status "NullAngle" If <P3P4> is perpendicular to <Axis> we have the status "NullAngle" If <P1> and <P2> are confused we have the status "ConfusedPoints".
gce_MakeCone::gce_MakeCone  (  const gp_Pnt &  P1, 
const gp_Pnt &  P2,  
const Standard_Real  R1,  
const Standard_Real  R2  
) 
Makes a Cone with two points and two radius. The axis of the solution is the line passing through <P1> and <P2>. <R1> is the radius of the section passing through <P1> and <R2> the radius of the section passing through <P2>. If <P1> and <P2> are confused we have the status "NullAxis". Warning If an error occurs (that is, when IsDone returns false), the Status function returns:
const gp_Cone& gce_MakeCone::Operator  (  )  const 
gce_MakeCone::operator gp_Cone  (  )  const 
const gp_Cone& gce_MakeCone::Value  (  )  const 
Returns the constructed cone. Exceptions StdFail_NotDone if no cone is constructed.