This class implements the algorithms used to create 2d circles tangent to 3 points/lines/circles/ curves with one curve or more. The arguments of all construction methods are : More...

#include <Geom2dGcc_Circ2d3TanIter.hxx>

Public Member Functions
	Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedCirc &Qualified1, const GccEnt_QualifiedCirc &Qualified2, const Geom2dGcc_QCurve &Qualified3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Param3, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles tangent to 2 circles and a curve. More...

	Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedCirc &Qualified1, const Geom2dGcc_QCurve &Qualified2, const Geom2dGcc_QCurve &Qualified3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Param3, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles tangent to a circle and 2 curves. More...

	Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedCirc &Qualified1, const GccEnt_QualifiedLin &Qualified2, const Geom2dGcc_QCurve &Qualified3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Param3, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles tangent to a circle and a line and a curve. More...

	Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedCirc &Qualified1, const Geom2dGcc_QCurve &Qualified2, const gp_Pnt2d &Point3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles tangent to a circle and a point and a curve. More...

	Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedLin &Qualified1, const GccEnt_QualifiedLin &Qualified2, const Geom2dGcc_QCurve &Qualified3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Param3, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles tangent to 2 lines and a curve. More...

	Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedLin &Qualified1, const Geom2dGcc_QCurve &Qualified2, const Geom2dGcc_QCurve &Qualified3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Param3, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles tangent to a line and 2 curves. More...

	Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedLin &Qualified1, const Geom2dGcc_QCurve &Qualified2, const gp_Pnt2d &Point3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles tangent to a line and a curve and a point. More...

	Geom2dGcc_Circ2d3TanIter (const Geom2dGcc_QCurve &Qualified1, const gp_Pnt2d &Point1, const gp_Pnt2d &Point2, const Standard_Real Param1, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles tangent to a curve and 2 points. More...

	Geom2dGcc_Circ2d3TanIter (const Geom2dGcc_QCurve &Qualified1, const Geom2dGcc_QCurve &Qualified2, const gp_Pnt2d &Point2, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles tangent to 2 curves and a point. More...

	Geom2dGcc_Circ2d3TanIter (const Geom2dGcc_QCurve &Qualified1, const Geom2dGcc_QCurve &Qualified2, const Geom2dGcc_QCurve &Qualified3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Param3, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles tangent to 3 curves. More...

Standard_Boolean	IsDone () const
	This method returns True if the construction algorithm succeeded. More...

gp_Circ2d	ThisSolution () const
	Returns the solution. It raises NotDone if the construction algorithm didn't succeed. More...

void	WhichQualifier (GccEnt_Position &Qualif1, GccEnt_Position &Qualif2, GccEnt_Position &Qualif3) const

void	Tangency1 (Standard_Real &ParSol, Standard_Real &ParArg, gp_Pnt2d &PntSol) const
	Returns informations about the tangency point between the result and the first argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. It raises NotDone if the construction algorithm didn't succeed. More...

void	Tangency2 (Standard_Real &ParSol, Standard_Real &ParArg, gp_Pnt2d &PntSol) const
	Returns informations about the tangency point between the result and the second argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. It raises NotDone if the construction algorithm didn't succeed. More...

void	Tangency3 (Standard_Real &ParSol, Standard_Real &ParArg, gp_Pnt2d &PntSol) const
	Returns informations about the tangency point between the result and the third argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. It raises NotDone if the construction algorithm didn't succeed. More...

Standard_Boolean	IsTheSame1 () const
	It raises NotDone if the construction algorithm didn't succeed. More...

Standard_Boolean	IsTheSame2 () const
	It raises NotDone if the construction algorithm didn't succeed. More...

Standard_Boolean	IsTheSame3 () const
	It raises NotDone if the construction algorithm didn't succeed. More...

Detailed Description

This class implements the algorithms used to create 2d circles tangent to 3 points/lines/circles/ curves with one curve or more. The arguments of all construction methods are :

The three qualifiied elements for the tangency constrains (QualifiedCirc, QualifiedLine, Qualifiedcurv, Points).
A parameter for each QualifiedCurv.

Constructor & Destructor Documentation

◆ Geom2dGcc_Circ2d3TanIter() [1/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter	(	const GccEnt_QualifiedCirc &	Qualified1,
		const GccEnt_QualifiedCirc &	Qualified2,
		const Geom2dGcc_QCurve &	Qualified3,
		const Standard_Real	Param1,
		const Standard_Real	Param2,
		const Standard_Real	Param3,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles tangent to 2 circles and a curve.

◆ Geom2dGcc_Circ2d3TanIter() [2/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter	(	const GccEnt_QualifiedCirc &	Qualified1,
		const Geom2dGcc_QCurve &	Qualified2,
		const Geom2dGcc_QCurve &	Qualified3,
		const Standard_Real	Param1,
		const Standard_Real	Param2,
		const Standard_Real	Param3,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles tangent to a circle and 2 curves.

◆ Geom2dGcc_Circ2d3TanIter() [3/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter	(	const GccEnt_QualifiedCirc &	Qualified1,
		const GccEnt_QualifiedLin &	Qualified2,
		const Geom2dGcc_QCurve &	Qualified3,
		const Standard_Real	Param1,
		const Standard_Real	Param2,
		const Standard_Real	Param3,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles tangent to a circle and a line and a curve.

◆ Geom2dGcc_Circ2d3TanIter() [4/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter	(	const GccEnt_QualifiedCirc &	Qualified1,
		const Geom2dGcc_QCurve &	Qualified2,
		const gp_Pnt2d &	Point3,
		const Standard_Real	Param1,
		const Standard_Real	Param2,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles tangent to a circle and a point and a curve.

◆ Geom2dGcc_Circ2d3TanIter() [5/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter	(	const GccEnt_QualifiedLin &	Qualified1,
		const GccEnt_QualifiedLin &	Qualified2,
		const Geom2dGcc_QCurve &	Qualified3,
		const Standard_Real	Param1,
		const Standard_Real	Param2,
		const Standard_Real	Param3,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles tangent to 2 lines and a curve.

◆ Geom2dGcc_Circ2d3TanIter() [6/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter	(	const GccEnt_QualifiedLin &	Qualified1,
		const Geom2dGcc_QCurve &	Qualified2,
		const Geom2dGcc_QCurve &	Qualified3,
		const Standard_Real	Param1,
		const Standard_Real	Param2,
		const Standard_Real	Param3,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles tangent to a line and 2 curves.

◆ Geom2dGcc_Circ2d3TanIter() [7/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter	(	const GccEnt_QualifiedLin &	Qualified1,
		const Geom2dGcc_QCurve &	Qualified2,
		const gp_Pnt2d &	Point3,
		const Standard_Real	Param1,
		const Standard_Real	Param2,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles tangent to a line and a curve and a point.

◆ Geom2dGcc_Circ2d3TanIter() [8/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter	(	const Geom2dGcc_QCurve &	Qualified1,
		const gp_Pnt2d &	Point1,
		const gp_Pnt2d &	Point2,
		const Standard_Real	Param1,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles tangent to a curve and 2 points.

◆ Geom2dGcc_Circ2d3TanIter() [9/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter	(	const Geom2dGcc_QCurve &	Qualified1,
		const Geom2dGcc_QCurve &	Qualified2,
		const gp_Pnt2d &	Point2,
		const Standard_Real	Param1,
		const Standard_Real	Param2,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles tangent to 2 curves and a point.

◆ Geom2dGcc_Circ2d3TanIter() [10/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter	(	const Geom2dGcc_QCurve &	Qualified1,
		const Geom2dGcc_QCurve &	Qualified2,
		const Geom2dGcc_QCurve &	Qualified3,
		const Standard_Real	Param1,
		const Standard_Real	Param2,
		const Standard_Real	Param3,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles tangent to 3 curves.

Member Function Documentation

◆ IsDone()

Standard_Boolean Geom2dGcc_Circ2d3TanIter::IsDone ( ) const

This method returns True if the construction algorithm succeeded.

◆ IsTheSame1()

Standard_Boolean Geom2dGcc_Circ2d3TanIter::IsTheSame1 ( ) const

It raises NotDone if the construction algorithm didn't succeed.

◆ IsTheSame2()

Standard_Boolean Geom2dGcc_Circ2d3TanIter::IsTheSame2 ( ) const

It raises NotDone if the construction algorithm didn't succeed.

◆ IsTheSame3()

Standard_Boolean Geom2dGcc_Circ2d3TanIter::IsTheSame3 ( ) const

It raises NotDone if the construction algorithm didn't succeed.

◆ Tangency1()

void Geom2dGcc_Circ2d3TanIter::Tangency1	(	Standard_Real &	ParSol,
		Standard_Real &	ParArg,
		gp_Pnt2d &	PntSol
	)		const

Returns informations about the tangency point between the result and the first argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. It raises NotDone if the construction algorithm didn't succeed.

◆ Tangency2()

void Geom2dGcc_Circ2d3TanIter::Tangency2	(	Standard_Real &	ParSol,
		Standard_Real &	ParArg,
		gp_Pnt2d &	PntSol
	)		const

Returns informations about the tangency point between the result and the second argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. It raises NotDone if the construction algorithm didn't succeed.

◆ Tangency3()

void Geom2dGcc_Circ2d3TanIter::Tangency3	(	Standard_Real &	ParSol,
		Standard_Real &	ParArg,
		gp_Pnt2d &	PntSol
	)		const

Returns informations about the tangency point between the result and the third argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. It raises NotDone if the construction algorithm didn't succeed.

◆ ThisSolution()

gp_Circ2d Geom2dGcc_Circ2d3TanIter::ThisSolution ( ) const

Returns the solution. It raises NotDone if the construction algorithm didn't succeed.

◆ WhichQualifier()

void Geom2dGcc_Circ2d3TanIter::WhichQualifier	(	GccEnt_Position &	Qualif1,
		GccEnt_Position &	Qualif2,
		GccEnt_Position &	Qualif3
	)		const

The documentation for this class was generated from the following file:

Geom2dGcc_Circ2d3TanIter.hxx

Geom2dGcc_Circ2d3TanIter Class Reference

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ Geom2dGcc_Circ2d3TanIter() [1/10]

◆ Geom2dGcc_Circ2d3TanIter() [2/10]

◆ Geom2dGcc_Circ2d3TanIter() [3/10]

◆ Geom2dGcc_Circ2d3TanIter() [4/10]

◆ Geom2dGcc_Circ2d3TanIter() [5/10]

◆ Geom2dGcc_Circ2d3TanIter() [6/10]

◆ Geom2dGcc_Circ2d3TanIter() [7/10]

◆ Geom2dGcc_Circ2d3TanIter() [8/10]

◆ Geom2dGcc_Circ2d3TanIter() [9/10]

◆ Geom2dGcc_Circ2d3TanIter() [10/10]

Member Function Documentation

◆ IsDone()

◆ IsTheSame1()

◆ IsTheSame2()

◆ IsTheSame3()

◆ Tangency1()

◆ Tangency2()

◆ Tangency3()

◆ ThisSolution()

◆ WhichQualifier()