Approximation of an Surface S(u,v) (and eventually associate 2d Curves) defined by section's law. More...

#include <Approx_SweepApproximation.hxx>

Public Member Functions
	Approx_SweepApproximation (const Handle< Approx_SweepFunction > &Func)

void	Perform (const Standard_Real First, const Standard_Real Last, const Standard_Real Tol3d, const Standard_Real BoundTol, const Standard_Real Tol2d, const Standard_Real TolAngular, const GeomAbs_Shape Continuity=GeomAbs_C0, const Standard_Integer Degmax=11, const Standard_Integer Segmax=50)
	Perform the Approximation [First, Last] : Approx_SweepApproximation.cdl Tol3d : Tolerance to surface approximation Tol2d : Tolerance used to perform curve approximation Normaly the 2d curve are approximated with a tolerance given by the resolution on support surfaces, but if this tolerance is too large Tol2d is used. TolAngular : Tolerance (in radian) to control the angle beetween tangents on the section law and tangent of iso-v on approximed surface Continuity : The continuity in v waiting on the surface Degmax : The maximum degree in v requiered on the surface Segmax : The maximum number of span in v requiered on the surface Warning : The continuity ci can be obtained only if Ft is Ci. More...

Standard_Integer	Eval (const Standard_Real Parameter, const Standard_Integer DerivativeRequest, const Standard_Real First, const Standard_Real Last, Standard_Real &Result)
	The EvaluatorFunction from AdvApprox;. More...

Standard_Boolean	IsDone () const
	returns if we have an result More...

void	SurfShape (Standard_Integer &UDegree, Standard_Integer &VDegree, Standard_Integer &NbUPoles, Standard_Integer &NbVPoles, Standard_Integer &NbUKnots, Standard_Integer &NbVKnots) const

void	Surface (TColgp_Array2OfPnt &TPoles, TColStd_Array2OfReal &TWeights, TColStd_Array1OfReal &TUKnots, TColStd_Array1OfReal &TVKnots, TColStd_Array1OfInteger &TUMults, TColStd_Array1OfInteger &TVMults) const

Standard_Integer	UDegree () const

Standard_Integer	VDegree () const

const TColgp_Array2OfPnt &	SurfPoles () const

const TColStd_Array2OfReal &	SurfWeights () const

const TColStd_Array1OfReal &	SurfUKnots () const

const TColStd_Array1OfReal &	SurfVKnots () const

const TColStd_Array1OfInteger &	SurfUMults () const

const TColStd_Array1OfInteger &	SurfVMults () const

Standard_Real	MaxErrorOnSurf () const
	returns the maximum error in the suface approximation. More...

Standard_Real	AverageErrorOnSurf () const
	returns the average error in the suface approximation. More...

Standard_Integer	NbCurves2d () const

void	Curves2dShape (Standard_Integer &Degree, Standard_Integer &NbPoles, Standard_Integer &NbKnots) const

void	Curve2d (const Standard_Integer Index, TColgp_Array1OfPnt2d &TPoles, TColStd_Array1OfReal &TKnots, TColStd_Array1OfInteger &TMults) const

Standard_Integer	Curves2dDegree () const

const TColgp_Array1OfPnt2d &	Curve2dPoles (const Standard_Integer Index) const

const TColStd_Array1OfReal &	Curves2dKnots () const

const TColStd_Array1OfInteger &	Curves2dMults () const

Standard_Real	Max2dError (const Standard_Integer Index) const
	returns the maximum error of the <Index> 2d curve approximation. More...

Standard_Real	Average2dError (const Standard_Integer Index) const
	returns the average error of the <Index> 2d curve approximation. More...

Standard_Real	TolCurveOnSurf (const Standard_Integer Index) const
	returns the maximum 3d error of the <Index> 2d curve approximation on the Surface. More...

void	Dump (Standard_OStream &o) const
	display information on approximation. More...

Detailed Description

Approximation of an Surface S(u,v) (and eventually associate 2d Curves) defined by section's law.

This surface is defined by a function F(u, v) where Ft(u) = F(u, t) is a bspline curve. To use this algorithme, you have to implement Ft(u) as a derivative class of Approx_SweepFunction. This algorithm can be used by blending, sweeping...

Constructor & Destructor Documentation

◆ Approx_SweepApproximation()

Approx_SweepApproximation::Approx_SweepApproximation ( const Handle< Approx_SweepFunction > & Func )

Member Function Documentation

◆ Average2dError()

Standard_Real Approx_SweepApproximation::Average2dError ( const Standard_Integer Index ) const

returns the average error of the <Index> 2d curve approximation.

◆ AverageErrorOnSurf()

Standard_Real Approx_SweepApproximation::AverageErrorOnSurf ( ) const

returns the average error in the suface approximation.

◆ Curve2d()

void Approx_SweepApproximation::Curve2d	(	const Standard_Integer	Index,
		TColgp_Array1OfPnt2d &	TPoles,
		TColStd_Array1OfReal &	TKnots,
		TColStd_Array1OfInteger &	TMults
	)		const

◆ Curve2dPoles()

const TColgp_Array1OfPnt2d& Approx_SweepApproximation::Curve2dPoles ( const Standard_Integer Index ) const

◆ Curves2dDegree()

Standard_Integer Approx_SweepApproximation::Curves2dDegree ( ) const

◆ Curves2dKnots()

const TColStd_Array1OfReal& Approx_SweepApproximation::Curves2dKnots ( ) const

◆ Curves2dMults()

const TColStd_Array1OfInteger& Approx_SweepApproximation::Curves2dMults ( ) const

◆ Curves2dShape()

void Approx_SweepApproximation::Curves2dShape	(	Standard_Integer &	Degree,
		Standard_Integer &	NbPoles,
		Standard_Integer &	NbKnots
	)		const

◆ Dump()

void Approx_SweepApproximation::Dump ( Standard_OStream & o ) const

display information on approximation.

◆ Eval()

Standard_Integer Approx_SweepApproximation::Eval	(	const Standard_Real	Parameter,
		const Standard_Integer	DerivativeRequest,
		const Standard_Real	First,
		const Standard_Real	Last,
		Standard_Real &	Result
	)

The EvaluatorFunction from AdvApprox;.

◆ IsDone()

Standard_Boolean Approx_SweepApproximation::IsDone ( ) const

returns if we have an result

◆ Max2dError()

Standard_Real Approx_SweepApproximation::Max2dError ( const Standard_Integer Index ) const

returns the maximum error of the <Index> 2d curve approximation.

◆ MaxErrorOnSurf()

Standard_Real Approx_SweepApproximation::MaxErrorOnSurf ( ) const

returns the maximum error in the suface approximation.

◆ NbCurves2d()

Standard_Integer Approx_SweepApproximation::NbCurves2d ( ) const

◆ Perform()

void Approx_SweepApproximation::Perform	(	const Standard_Real	First,
		const Standard_Real	Last,
		const Standard_Real	Tol3d,
		const Standard_Real	BoundTol,
		const Standard_Real	Tol2d,
		const Standard_Real	TolAngular,
		const GeomAbs_Shape	Continuity = `GeomAbs_C0`,
		const Standard_Integer	Degmax = `11`,
		const Standard_Integer	Segmax = `50`
	)

Perform the Approximation [First, Last] : Approx_SweepApproximation.cdl Tol3d : Tolerance to surface approximation Tol2d : Tolerance used to perform curve approximation Normaly the 2d curve are approximated with a tolerance given by the resolution on support surfaces, but if this tolerance is too large Tol2d is used. TolAngular : Tolerance (in radian) to control the angle beetween tangents on the section law and tangent of iso-v on approximed surface Continuity : The continuity in v waiting on the surface Degmax : The maximum degree in v requiered on the surface Segmax : The maximum number of span in v requiered on the surface Warning : The continuity ci can be obtained only if Ft is Ci.

◆ Surface()

void Approx_SweepApproximation::Surface	(	TColgp_Array2OfPnt &	TPoles,
		TColStd_Array2OfReal &	TWeights,
		TColStd_Array1OfReal &	TUKnots,
		TColStd_Array1OfReal &	TVKnots,
		TColStd_Array1OfInteger &	TUMults,
		TColStd_Array1OfInteger &	TVMults
	)		const

◆ SurfPoles()

const TColgp_Array2OfPnt& Approx_SweepApproximation::SurfPoles ( ) const

◆ SurfShape()

void Approx_SweepApproximation::SurfShape	(	Standard_Integer &	UDegree,
		Standard_Integer &	VDegree,
		Standard_Integer &	NbUPoles,
		Standard_Integer &	NbVPoles,
		Standard_Integer &	NbUKnots,
		Standard_Integer &	NbVKnots
	)		const

◆ SurfUKnots()

const TColStd_Array1OfReal& Approx_SweepApproximation::SurfUKnots ( ) const

◆ SurfUMults()

const TColStd_Array1OfInteger& Approx_SweepApproximation::SurfUMults ( ) const

◆ SurfVKnots()

const TColStd_Array1OfReal& Approx_SweepApproximation::SurfVKnots ( ) const

◆ SurfVMults()

const TColStd_Array1OfInteger& Approx_SweepApproximation::SurfVMults ( ) const

◆ SurfWeights()

const TColStd_Array2OfReal& Approx_SweepApproximation::SurfWeights ( ) const

◆ TolCurveOnSurf()

Standard_Real Approx_SweepApproximation::TolCurveOnSurf ( const Standard_Integer Index ) const

returns the maximum 3d error of the <Index> 2d curve approximation on the Surface.

◆ UDegree()

Standard_Integer Approx_SweepApproximation::UDegree ( ) const

◆ VDegree()

Standard_Integer Approx_SweepApproximation::VDegree ( ) const

The documentation for this class was generated from the following file:

Approx_SweepApproximation.hxx

Approx_SweepApproximation Class Reference

Public Member Functions