BRepFeat_MakeRevolutionForm Class Reference

MakeRevolutionForm Generates a surface of revolution in the feature as it slides along a revolved face in the basis shape. The semantics of mechanical features is built around giving thickness to a contour. This thickness can either be unilateral - on one side of the contour - or bilateral - on both sides. As in the semantics of form features, the thickness is defined by construction of shapes in specific contexts. The development contexts differ, however,in case of mechanical features. Here they include extrusion: More...

#include <BRepFeat_MakeRevolutionForm.hxx>

Inheritance diagram for BRepFeat_MakeRevolutionForm:

Public Member Functions
	BRepFeat_MakeRevolutionForm ()
	initializes the linear form class. More...
	BRepFeat_MakeRevolutionForm (const TopoDS_Shape &Sbase, const TopoDS_Wire &W, const Handle< Geom_Plane > &Plane, const gp_Ax1 &Axis, const Standard_Real Height1, const Standard_Real Height2, const Standard_Integer Fuse, Standard_Boolean &Sliding)
	a contour W, a shape Sbase and a plane P are initialized to serve as the basic elements in the construction of the rib or groove. The axis Axis of the revolved surface in the basis shape defines the feature's axis of revolution. Height1 and Height2 may be used as limits to the construction of the feature. Fuse offers a choice between: More...
void	Init (const TopoDS_Shape &Sbase, const TopoDS_Wire &W, const Handle< Geom_Plane > &Plane, const gp_Ax1 &Axis, const Standard_Real Height1, const Standard_Real Height2, const Standard_Integer Fuse, Standard_Boolean &Sliding)
	Initializes this construction algorithm A contour W, a shape Sbase and a plane P are initialized to serve as the basic elements in the construction of the rib or groove. The axis Axis of the revolved surface in the basis shape defines the feature's axis of revolution. Height1 and Height2 may be used as limits to the construction of the feature. Fuse offers a choice between: More...
void	Add (const TopoDS_Edge &E, const TopoDS_Face &OnFace)
	Indicates that the edge <E> will slide on the face <OnFace>. Raises ConstructionError if the face does not belong to the basis shape, or the edge to the prismed shape. More...
void	Perform ()
	Performs a prism from the wire to the plane along the basis shape S. Reconstructs the feature topologically. More...
Standard_Boolean	Propagate (TopTools_ListOfShape &L, const TopoDS_Face &F, const gp_Pnt &FPoint, const gp_Pnt &LPoint, Standard_Boolean &falseside)
Public Member Functions inherited from BRepFeat_RibSlot
virtual Standard_Boolean	IsDeleted (const TopoDS_Shape &F) override
	Returns true if F a TopoDS_Shape of type edge or face has been deleted. More...
virtual const TopTools_ListOfShape &	Modified (const TopoDS_Shape &F) override
	Returns the list of generated Faces F. This list may be empty. More...
virtual const TopTools_ListOfShape &	Generated (const TopoDS_Shape &S) override
	Returns a list TopTools_ListOfShape of the faces S created in the shape. More...
const TopTools_ListOfShape &	FirstShape () const
	Returns the list of shapes created at the bottom of the created form. It may be an empty list. More...
const TopTools_ListOfShape &	LastShape () const
	Returns the list of shapes created at the top of the created form. It may be an empty list. More...
const TopTools_ListOfShape &	FacesForDraft () const
	Returns a list of the limiting and glueing faces generated by the feature. These faces did not originally exist in the basis shape. The list provides the information necessary for subsequent addition of a draft to a face. It may be an empty list. If a face has tangent edges, no draft is possible, and the tangent edges must subsequently be removed if you want to add a draft to the face. More...
const TopTools_ListOfShape &	NewEdges () const
	Returns a list of the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape. The list provides the information necessary for subsequent addition of fillets. It may be an empty list. More...
const TopTools_ListOfShape &	TgtEdges () const
	Returns a list of the tangent edges among the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape and are tangent to the face against which the feature is built. The list provides the information necessary for subsequent addition of fillets. It may be an empty list. If an edge is tangent, no fillet is possible, and the edge must subsequently be removed if you want to add a fillet. More...
BRepFeat_StatusError	CurrentStatusError () const
Public Member Functions inherited from BRepBuilderAPI_MakeShape
virtual void	Build ()
	This is called by Shape(). It does nothing but may be redefined. More...
virtual const TopoDS_Shape &	Shape ()
	Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built. More...
	operator TopoDS_Shape ()
Public Member Functions inherited from BRepBuilderAPI_Command
virtual	~BRepBuilderAPI_Command ()
virtual Standard_Boolean	IsDone () const
void	Check () const
	Raises NotDone if done is false. More...

Additional Inherited Members
Static Public Member Functions inherited from BRepFeat_RibSlot
static Standard_Real	IntPar (const Handle< Geom_Curve > &C, const gp_Pnt &P)
static TopoDS_Face	ChoiceOfFaces (TopTools_ListOfShape &faces, const Handle< Geom_Curve > &cc, const Standard_Real par, const Standard_Real bnd, const Handle< Geom_Plane > &Pln)
Protected Member Functions inherited from BRepFeat_RibSlot
	BRepFeat_RibSlot ()
	Redefines the empty constructor. More...
void	LFPerform ()
	General perform method... More...
gp_Pnt	CheckPoint (const TopoDS_Edge &e, const Standard_Real bnd, const Handle< Geom_Plane > &Pln)
gp_Dir	Normal (const TopoDS_Face &F, const gp_Pnt &P)
void	EdgeExtention (TopoDS_Edge &e, const Standard_Real bnd, const Standard_Boolean FirstLast)
Standard_Real	HeightMax (const TopoDS_Shape &theSbase, const TopoDS_Shape &theSUntil, gp_Pnt &p1, gp_Pnt &p2)
Standard_Boolean	ExtremeFaces (const Standard_Boolean RevolRib, const Standard_Real bnd, const Handle< Geom_Plane > &Pln, TopoDS_Edge &FirstEdge, TopoDS_Edge &LastEdge, TopoDS_Face &FirstFace, TopoDS_Face &LastFace, TopoDS_Vertex &FirstVertex, TopoDS_Vertex &LastVertex, Standard_Boolean &OnFirstFace, Standard_Boolean &OnLastFace, Standard_Boolean &PtOnFirstEdge, Standard_Boolean &PtOnLastEdge, TopoDS_Edge &OnFirstEdge, TopoDS_Edge &OnLastEdge)
void	PtOnEdgeVertex (const Standard_Boolean RevolRib, const TopoDS_Shape &shape, const gp_Pnt &point, const TopoDS_Vertex &FirstVertex, const TopoDS_Vertex &LastVertex, Standard_Boolean &PtOnEdge, TopoDS_Edge &OnEdge, Standard_Boolean &PtOnVertex, TopoDS_Vertex &OnVertex)
Standard_Boolean	SlidingProfile (TopoDS_Face &Prof, const Standard_Boolean RevolRib, const Standard_Real myTol, Standard_Integer &Concavite, const Handle< Geom_Plane > &myPln, const TopoDS_Face &BndFace, const gp_Pnt &CheckPnt, const TopoDS_Face &FirstFace, const TopoDS_Face &LastFace, const TopoDS_Vertex &FirstVertex, const TopoDS_Vertex &LastVertex, const TopoDS_Edge &FirstEdge, const TopoDS_Edge &LastEdge)
Standard_Boolean	NoSlidingProfile (TopoDS_Face &Prof, const Standard_Boolean RevolRib, const Standard_Real myTol, Standard_Integer &Concavite, const Handle< Geom_Plane > &myPln, const Standard_Real bnd, const TopoDS_Face &BndFace, const gp_Pnt &CheckPnt, const TopoDS_Face &FirstFace, const TopoDS_Face &LastFace, const TopoDS_Vertex &FirstVertex, const TopoDS_Vertex &LastVertex, const TopoDS_Edge &FirstEdge, const TopoDS_Edge &LastEdge, const Standard_Boolean OnFirstFace, const Standard_Boolean OnLastFace)
void	UpdateDescendants (const LocOpe_Gluer &G)
	Updates the data structures of descendant shapes during the glueing operation.Returns the modified, generated and deleted faces during the course of the glueing operation. More...
void	UpdateDescendants (const BRepAlgoAPI_BooleanOperation &aBOP, const TopoDS_Shape &SResult, const Standard_Boolean SkipFace=Standard_False)
Protected Member Functions inherited from BRepBuilderAPI_MakeShape
	BRepBuilderAPI_MakeShape ()
Protected Member Functions inherited from BRepBuilderAPI_Command
	BRepBuilderAPI_Command ()
	Set done to False. More...
void	Done ()
	Set done to true. More...
void	NotDone ()
	Set done to false. More...
Protected Attributes inherited from BRepFeat_RibSlot
gp_Pnt	myFirstPnt
gp_Pnt	myLastPnt
Standard_Boolean	myFuse
Standard_Boolean	mySliding
TopTools_DataMapOfShapeListOfShape	myMap
TopTools_DataMapOfShapeListOfShape	myLFMap
TopoDS_Shape	myFShape
TopoDS_Shape	myLShape
BRepFeat_PerfSelection	myPerfSelection
TopoDS_Wire	myWire
TopoDS_Shape	mySbase
TopoDS_Face	mySkface
TopoDS_Face	myPbase
TopoDS_Shape	myGShape
TopoDS_Shape	mySUntil
TopTools_DataMapOfShapeShape	myGluedF
TopTools_ListOfShape	myNewEdges
TopTools_ListOfShape	myTgtEdges
TopTools_ListOfShape	myFacesForDraft
BRepFeat_StatusError	myStatusError
Protected Attributes inherited from BRepBuilderAPI_MakeShape
TopoDS_Shape	myShape
TopTools_ListOfShape	myGenerated

Detailed Description

MakeRevolutionForm Generates a surface of revolution in the feature as it slides along a revolved face in the basis shape. The semantics of mechanical features is built around giving thickness to a contour. This thickness can either be unilateral - on one side of the contour - or bilateral - on both sides. As in the semantics of form features, the thickness is defined by construction of shapes in specific contexts. The development contexts differ, however,in case of mechanical features. Here they include extrusion:

• to a limiting face of the basis shape
• to or from a limiting plane
• to a height.

Constructor & Destructor Documentation

BRepFeat_MakeRevolutionForm() [1/2]

BRepFeat_MakeRevolutionForm::BRepFeat_MakeRevolutionForm

(

)

initializes the linear form class.

BRepFeat_MakeRevolutionForm() [2/2]

BRepFeat_MakeRevolutionForm::BRepFeat_MakeRevolutionForm	(	const TopoDS_Shape &	Sbase,
		const TopoDS_Wire &	W,
		const Handle< Geom_Plane > &	Plane,
		const gp_Ax1 &	Axis,
		const Standard_Real	Height1,
		const Standard_Real	Height2,
		const Standard_Integer	Fuse,
		Standard_Boolean &	Sliding
	)

a contour W, a shape Sbase and a plane P are initialized to serve as the basic elements in the construction of the rib or groove. The axis Axis of the revolved surface in the basis shape defines the feature's axis of revolution. Height1 and Height2 may be used as limits to the construction of the feature. Fuse offers a choice between:

• removing matter with a Boolean cut using the setting 0 in case of the groove
• adding matter with Boolean fusion using the setting 1 in case of the rib.

Member Function Documentation

Add()

void BRepFeat_MakeRevolutionForm::Add	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	OnFace
	)

Indicates that the edge <E> will slide on the face <OnFace>. Raises ConstructionError if the face does not belong to the basis shape, or the edge to the prismed shape.

Init()

void BRepFeat_MakeRevolutionForm::Init	(	const TopoDS_Shape &	Sbase,
		const TopoDS_Wire &	W,
		const Handle< Geom_Plane > &	Plane,
		const gp_Ax1 &	Axis,
		const Standard_Real	Height1,
		const Standard_Real	Height2,
		const Standard_Integer	Fuse,
		Standard_Boolean &	Sliding
	)

Initializes this construction algorithm A contour W, a shape Sbase and a plane P are initialized to serve as the basic elements in the construction of the rib or groove. The axis Axis of the revolved surface in the basis shape defines the feature's axis of revolution. Height1 and Height2 may be used as limits to the construction of the feature. Fuse offers a choice between:

• removing matter with a Boolean cut using the setting 0 in case of the groove
• adding matter with Boolean fusion using the setting 1 in case of the rib.

Perform()

void BRepFeat_MakeRevolutionForm::Perform

(

)

Performs a prism from the wire to the plane along the basis shape S. Reconstructs the feature topologically.

Propagate()

Standard_Boolean BRepFeat_MakeRevolutionForm::Propagate	(	TopTools_ListOfShape &	L,
		const TopoDS_Face &	F,
		const gp_Pnt &	FPoint,
		const gp_Pnt &	LPoint,
		Standard_Boolean &	falseside
	)

---

The documentation for this class was generated from the following file:

• BRepFeat_MakeRevolutionForm.hxx