Describes a right-handed coordinate system in 3D space. A coordinate system is defined by: More...
#include <Geom_Axis2Placement.hxx>
Inheritance diagram for Geom_Axis2Placement:
Public Member Functions | |
| Geom_Axis2Placement (const gp_Ax2 &A2) | |
| Returns a transient copy of A2. More... | |
| Geom_Axis2Placement (const gp_Pnt &P, const gp_Dir &N, const gp_Dir &Vx) | |
| P is the origin of the axis placement, N is the main direction of the axis placement and Vx is the "XDirection". If the two directions N and Vx are not orthogonal the "XDirection" is computed as follow : XDirection = N ^ (Vx ^ N). Raised if N and Vx are parallel. More... | |
| void | SetAx2 (const gp_Ax2 &A2) |
| Assigns the origin and the three unit vectors of A2 to this coordinate system. More... | |
| void | SetDirection (const gp_Dir &V) override |
| Changes the main direction of the axis placement. The "Xdirection" is modified : New XDirection = V ^ (Previous_Xdirection ^ V). More... | |
| void | SetXDirection (const gp_Dir &Vx) |
| Changes the "XDirection" of the axis placement, Vx is the new "XDirection". If Vx is not normal to the main direction then "XDirection" is computed as follow : XDirection = Direction ^ ( Vx ^ Direction). The main direction is not modified. Raised if Vx and "Direction" are parallel. More... | |
| void | SetYDirection (const gp_Dir &Vy) |
| Changes the "YDirection" of the axis placement, Vy is the new "YDirection". If Vy is not normal to the main direction then "YDirection" is computed as follow : YDirection = Direction ^ ( Vy ^ Direction). The main direction is not modified. The "XDirection" is modified. Raised if Vy and the main direction are parallel. More... | |
| gp_Ax2 | Ax2 () const |
| Returns a non transient copy of <me>. More... | |
| const gp_Dir & | XDirection () const |
| Returns the "XDirection". This is a unit vector. More... | |
| const gp_Dir & | YDirection () const |
| Returns the "YDirection". This is a unit vector. More... | |
| void | Transform (const gp_Trsf &T) override |
| Transforms an axis placement with a Trsf. The "Location" point, the "XDirection" and the "YDirection" are transformed with T. The resulting main "Direction" of <me> is the cross product between the "XDirection" and the "YDirection" after transformation. More... | |
| Handle< Geom_Geometry > | Copy () const override |
| Creates a new object which is a copy of this coordinate system. More... | |
 Public Member Functions inherited from Geom_AxisPlacement | |
| void | SetAxis (const gp_Ax1 &A1) |
| Assigns A1 as the "main Axis" of this positioning system. This modifies. More... | |
| void | SetLocation (const gp_Pnt &P) |
| Assigns the point P as the origin of this positioning system. More... | |
| Standard_Real | Angle (const Handle< Geom_AxisPlacement > &Other) const |
| Computes the angular value, in radians, between the "main Direction" of this positioning system and that of positioning system Other. The result is a value between 0 and Pi. More... | |
| const gp_Ax1 & | Axis () const |
| Returns the main axis of the axis placement. For an "Axis2placement" it is the main axis (Location, Direction ). For an "Axis1Placement" this method returns a copy of <me>. More... | |
| gp_Dir | Direction () const |
| Returns the main "Direction" of an axis placement. More... | |
| gp_Pnt | Location () const |
| Returns the Location point (origin) of the axis placement. More... | |
| Public Member Functions inherited from Geom_Geometry | |
| void | Mirror (const gp_Pnt &P) |
| Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More... | |
| void | Mirror (const gp_Ax1 &A1) |
| Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More... | |
| void | Mirror (const gp_Ax2 &A2) |
| Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More... | |
| void | Rotate (const gp_Ax1 &A1, const Standard_Real Ang) |
| Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More... | |
| void | Scale (const gp_Pnt &P, const Standard_Real S) |
| Scales a Geometry. S is the scaling value. More... | |
| void | Translate (const gp_Vec &V) |
| Translates a Geometry. V is the vector of the tanslation. More... | |
| void | Translate (const gp_Pnt &P1, const gp_Pnt &P2) |
| Translates a Geometry from the point P1 to the point P2. More... | |
| Handle< Geom_Geometry > | Mirrored (const gp_Pnt &P) const |
| Handle< Geom_Geometry > | Mirrored (const gp_Ax1 &A1) const |
| Handle< Geom_Geometry > | Mirrored (const gp_Ax2 &A2) const |
| Handle< Geom_Geometry > | Rotated (const gp_Ax1 &A1, const Standard_Real Ang) const |
| Handle< Geom_Geometry > | Scaled (const gp_Pnt &P, const Standard_Real S) const |
| Handle< Geom_Geometry > | Transformed (const gp_Trsf &T) const |
| Handle< Geom_Geometry > | Translated (const gp_Vec &V) const |
| Handle< Geom_Geometry > | Translated (const gp_Pnt &P1, const gp_Pnt &P2) const |
| Public Member Functions inherited from Standard_Transient | |
| Standard_Transient () | |
| Empty constructor. More... | |
| Standard_Transient (const Standard_Transient &) | |
| Copy constructor – does nothing. More... | |
| Standard_Transient & | operator= (const Standard_Transient &) |
| Assignment operator, needed to avoid copying reference counter. More... | |
| virtual | ~Standard_Transient () |
| Destructor must be virtual. More... | |
| virtual void | Delete () const |
| Memory deallocator for transient classes. More... | |
| virtual const opencascade::handle< Standard_Type > & | DynamicType () const |
| Returns a type descriptor about this object. More... | |
| Standard_Boolean | IsInstance (const opencascade::handle< Standard_Type > &theType) const |
| Returns a true value if this is an instance of Type. More... | |
| Standard_Boolean | IsInstance (const Standard_CString theTypeName) const |
| Returns a true value if this is an instance of TypeName. More... | |
| Standard_Boolean | IsKind (const opencascade::handle< Standard_Type > &theType) const |
| Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Boolean | IsKind (const Standard_CString theTypeName) const |
| Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Transient * | This () const |
| Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More... | |
| Standard_Integer | GetRefCount () const |
| Get the reference counter of this object. More... | |
| void | IncrementRefCounter () const |
| Increments the reference counter of this object. More... | |
| Standard_Integer | DecrementRefCounter () const |
| Decrements the reference counter of this object; returns the decremented value. More... | |
Additional Inherited Members | |
| Public Types inherited from Standard_Transient | |
| typedef void | base_type |
| Returns a type descriptor about this object. More... | |
| Static Public Member Functions inherited from Standard_Transient | |
| static const char * | get_type_name () |
| Returns a type descriptor about this object. More... | |
| static const opencascade::handle< Standard_Type > & | get_type_descriptor () |
| Returns type descriptor of Standard_Transient class. More... | |
| Protected Attributes inherited from Geom_AxisPlacement | |
| gp_Ax1 | axis |
Detailed Description
Describes a right-handed coordinate system in 3D space. A coordinate system is defined by:
- its origin, also termed the "Location point" of the coordinate system,
- three orthogonal unit vectors, termed respectively the "X Direction", "Y Direction" and "Direction" (or "main Direction") of the coordinate system. As a Geom_Axis2Placement coordinate system is right-handed, its "Direction" is always equal to the cross product of its "X Direction" and "Y Direction". The "Direction" of a coordinate system is called the "main Direction" because when this unit vector is modified, the "X Direction" and "Y Direction" are recomputed, whereas when the "X Direction" or "Y Direction" is changed, the "main Direction" is retained. The "main Direction" is also the "Z Direction". Note: Geom_Axis2Placement coordinate systems provide the same kind of "geometric" services as gp_Ax2 coordinate systems but have more complex data structures. The geometric objects provided by the Geom package use gp_Ax2 objects to include coordinate systems in their data structures, or to define the geometric transformations, which are applied to them. Geom_Axis2Placement coordinate systems are used in a context where they can be shared by several objects contained inside a common data structure.
Constructor & Destructor Documentation
◆ Geom_Axis2Placement() [1/2]
| Geom_Axis2Placement::Geom_Axis2Placement | ( | const gp_Ax2 & | A2 | ) |
Returns a transient copy of A2.
◆ Geom_Axis2Placement() [2/2]
P is the origin of the axis placement, N is the main direction of the axis placement and Vx is the "XDirection". If the two directions N and Vx are not orthogonal the "XDirection" is computed as follow : XDirection = N ^ (Vx ^ N). Raised if N and Vx are parallel.
Member Function Documentation
◆ Ax2()
| gp_Ax2 Geom_Axis2Placement::Ax2 | ( | ) | const |
Returns a non transient copy of <me>.
◆ Copy()
|
overridevirtual |
Creates a new object which is a copy of this coordinate system.
Implements Geom_Geometry.
◆ SetAx2()
| void Geom_Axis2Placement::SetAx2 | ( | const gp_Ax2 & | A2 | ) |
Assigns the origin and the three unit vectors of A2 to this coordinate system.
◆ SetDirection()
|
overridevirtual |
Changes the main direction of the axis placement. The "Xdirection" is modified : New XDirection = V ^ (Previous_Xdirection ^ V).
Raised if V and the previous "XDirection" are parallel because it is impossible to calculate the new "XDirection" and the new "YDirection".
Implements Geom_AxisPlacement.
◆ SetXDirection()
| void Geom_Axis2Placement::SetXDirection | ( | const gp_Dir & | Vx | ) |
Changes the "XDirection" of the axis placement, Vx is the new "XDirection". If Vx is not normal to the main direction then "XDirection" is computed as follow : XDirection = Direction ^ ( Vx ^ Direction). The main direction is not modified. Raised if Vx and "Direction" are parallel.
◆ SetYDirection()
| void Geom_Axis2Placement::SetYDirection | ( | const gp_Dir & | Vy | ) |
Changes the "YDirection" of the axis placement, Vy is the new "YDirection". If Vy is not normal to the main direction then "YDirection" is computed as follow : YDirection = Direction ^ ( Vy ^ Direction). The main direction is not modified. The "XDirection" is modified. Raised if Vy and the main direction are parallel.
◆ Transform()
|
overridevirtual |
Transforms an axis placement with a Trsf. The "Location" point, the "XDirection" and the "YDirection" are transformed with T. The resulting main "Direction" of <me> is the cross product between the "XDirection" and the "YDirection" after transformation.
Implements Geom_Geometry.
◆ XDirection()
| const gp_Dir& Geom_Axis2Placement::XDirection | ( | ) | const |
Returns the "XDirection". This is a unit vector.
◆ YDirection()
| const gp_Dir& Geom_Axis2Placement::YDirection | ( | ) | const |
Returns the "YDirection". This is a unit vector.
The documentation for this class was generated from the following file:
