BOPAlgo_MakeConnected is the algorithm for making the touching shapes connected or glued, i.e. for making the coinciding geometries be topologically shared among the shapes. More...

#include <BOPAlgo_MakeConnected.hxx>

Inheritance diagram for BOPAlgo_MakeConnected:

[legend]

Public Member Functions
Constructor
	BOPAlgo_MakeConnected ()
	Empty constructor. More...

Setters for the shapes to make connected
void	SetArguments (const TopTools_ListOfShape &theArgs)
	Sets the shape for making them connected. More...

void	AddArgument (const TopoDS_Shape &theS)
	Adds the shape to the arguments. More...

const TopTools_ListOfShape &	Arguments () const
	Returns the list of arguments of the operation. More...

Performing the operations
void	Perform ()
	Performs the operation, i.e. makes the input shapes connected. More...

Shape periodicity & repetition
void	MakePeriodic (const BOPAlgo_MakePeriodic::PeriodicityParams &theParams)
	Makes the connected shape periodic. Repeated calls of this method overwrite the previous calls working with the basis connected shape. More...

void	RepeatShape (const Standard_Integer theDirectionID, const Standard_Integer theTimes)
	Performs repetition of the periodic shape in specified direction required number of times. More...

void	ClearRepetitions ()
	Clears the repetitions performed on the periodic shape, keeping the shape periodic. More...

const BOPAlgo_MakePeriodic &	PeriodicityTool () const
	Returns the periodicity tool. More...

Material transitions
const TopTools_ListOfShape &	MaterialsOnPositiveSide (const TopoDS_Shape &theS)
	Returns the original shapes which images contain the the given shape with FORWARD orientation. More...

const TopTools_ListOfShape &	MaterialsOnNegativeSide (const TopoDS_Shape &theS)
	Returns the original shapes which images contain the the given shape with REVERSED orientation. More...

History methods
const Handle< BRepTools_History > &	History () const
	Returns the history of operations. More...

const TopTools_ListOfShape &	GetModified (const TopoDS_Shape &theS)
	Returns the list of shapes modified from the given shape. More...

const TopTools_ListOfShape &	GetOrigins (const TopoDS_Shape &theS)
	Returns the list of original shapes from which the current shape has been created. More...

Getting the result shapes
const TopoDS_Shape &	Shape () const
	Returns the resulting connected shape. More...

const TopoDS_Shape &	PeriodicShape () const
	Returns the resulting periodic & repeated shape. More...

Clearing the contents of the algorithm from previous runs
void	Clear ()
	Clears the contents of the algorithm. More...

Public Member Functions inherited from BOPAlgo_Options
	BOPAlgo_Options ()
	Empty constructor. More...

	BOPAlgo_Options (const Handle< NCollection_BaseAllocator > &theAllocator)
	Constructor with allocator. More...

virtual	~BOPAlgo_Options ()
	Destructor. More...

const Handle< NCollection_BaseAllocator > &	Allocator () const
	Returns allocator. More...

void	AddError (const Handle< Message_Alert > &theAlert)
	Adds the alert as error (fail) More...

void	AddWarning (const Handle< Message_Alert > &theAlert)
	Adds the alert as warning. More...

Standard_Boolean	HasErrors () const
	Returns true if algorithm has failed. More...

Standard_Boolean	HasError (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated error of specified type. More...

Standard_Boolean	HasWarnings () const
	Returns true if algorithm has generated some warning alerts. More...

Standard_Boolean	HasWarning (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated warning of specified type. More...

const Handle< Message_Report > &	GetReport () const
	Returns report collecting all errors and warnings. More...

void	DumpErrors (Standard_OStream &theOS) const
	Dumps the error status into the given stream. More...

void	DumpWarnings (Standard_OStream &theOS) const
	Dumps the warning statuses into the given stream. More...

void	ClearWarnings ()
	Clears the warnings of the algorithm. More...

void	SetFuzzyValue (const Standard_Real theFuzz)
	Sets the additional tolerance. More...

Standard_Real	FuzzyValue () const
	Returns the additional tolerance. More...

void	SetProgressIndicator (const Message_ProgressScope &theProgress)
	Set the Progress Indicator object. More...

void	SetUseOBB (const Standard_Boolean theUseOBB)
	Enables/Disables the usage of OBB. More...

Standard_Boolean	UseOBB () const
	Returns the flag defining usage of OBB. More...

void	SetRunParallel (const Standard_Boolean theFlag)
	Set the flag of parallel processing if <theFlag> is true the parallel processing is switched on if <theFlag> is false the parallel processing is switched off. More...

Standard_Boolean	RunParallel () const
	Returns the flag of parallel processing. More...

Protected Attributes
Fields
TopTools_ListOfShape	myArguments
	Input shapes for making them connected. More...

TopTools_IndexedMapOfShape	myAllInputsMap
	Map of all BRep sub-elements of the input shapes. More...

BOPAlgo_MakePeriodic	myPeriodicityMaker
	Tool for making the shape periodic. More...

NCollection_DataMap< TopoDS_Shape, TopTools_ListOfShape, TopTools_OrientedShapeMapHasher >	myMaterials
	Map of the materials associations for the border elements. More...

TopTools_DataMapOfShapeListOfShape	myOrigins
	Map of origins (allows tracking the shape's ancestors) More...

Handle< BRepTools_History >	myGlueHistory
	Gluing History. More...

Handle< BRepTools_History >	myHistory
	Final History of shapes modifications (including making the shape periodic and repetitions) More...

TopoDS_Shape	myGlued
	The resulting connected (glued) shape. More...

TopoDS_Shape	myShape
	The resulting shape. More...

Protected Attributes inherited from BOPAlgo_Options
Handle< NCollection_BaseAllocator >	myAllocator
	Enables/Disables the usage of OBB. More...

Handle< Message_Report >	myReport
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myRunParallel
	Enables/Disables the usage of OBB. More...

Standard_Real	myFuzzyValue
	Enables/Disables the usage of OBB. More...

const Message_ProgressScope *	myProgressScope
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myUseOBB
	Enables/Disables the usage of OBB. More...

Protected methods performing the operation
void	CheckData ()
	Checks the validity of input data. More...

void	MakeConnected ()
	Makes the argument shapes connected (or glued). More...

void	AssociateMaterials ()
	Associates the materials transitions for the border elements: More...

void	FillOrigins ()
	Fills the map of origins. More...

void	Update ()
	Updates the history, material associations, origins map after periodicity operations. More...

Additional Inherited Members
Static Public Member Functions inherited from BOPAlgo_Options
static Standard_Boolean	GetParallelMode ()
	Gets the global parallel mode. More...

static void	SetParallelMode (const Standard_Boolean theNewMode)
	Sets the global parallel mode. More...

Protected Member Functions inherited from BOPAlgo_Options
void	UserBreak () const
	Breaks the execution if the break signal is indicated by myProgressIndicator. More...

Detailed Description

BOPAlgo_MakeConnected is the algorithm for making the touching shapes connected or glued, i.e. for making the coinciding geometries be topologically shared among the shapes.

The input shapes should be of the same dimension, otherwise the gluing will not make any sense.

After the shapes are made connected, the border elements of input shapes are associated with the shapes to which they belong. At that, the orientation of the border element in the shape is taken into account. The associations are made for the following types:

For input SOLIDS, the resulting FACES are associated with the input solids;
For input FACES, the resulting EDGES are associated with the input faces;
For input EDGES, the resulting VERTICES are associated with the input edges.

In frames of this algorithm the input shapes are called materials, and the association process is called the material association. The material association allows finding the coinciding elements for the opposite input shapes. These elements will be associated to at least two materials.

After making the shapes connected, it is possible to make the connected shape periodic using the BOPAlgo_MakePeriodic tool. After making the shape periodic, the material associations will be updated to correspond to the actual state of the result shape. Repetition of the periodic shape is also possible here. Material associations are not going to be lost.

The algorithm supports history of shapes modification, thus it is possible to track the modification of the input shapes during the operations. Additionally to standard history methods, the algorithm provides the the method GetOrigins() which allows obtaining the input shapes from which the resulting shape has been created.

The algorithm supports the parallel processing mode, which allows faster completion of the operations.

The algorithm returns the following Error/Warning messages:

BOPAlgo_AlertTooFewArguments - error alert is given on the attempt to run the algorithm without the arguments;
BOPAlgo_AlertMultiDimensionalArguments - error alert is given on the attempt to run the algorithm on multi-dimensional arguments;
BOPAlgo_AlertUnableToGlue - error alert is given if the gluer algorithm is unable to glue the given arguments;
BOPAlgo_AlertUnableToMakePeriodic - warning alert is given if the periodicity maker is unable to make the connected shape periodic with given options;
BOPAlgo_AlertShapeIsNotPeriodic - warning alert is given on the attempt to repeat the shape before making it periodic.

Here is the example of usage of the algorithm:

TopTools_ListOfShape anArguments = ...;  // Shapes to make connected
Standard_Boolean bRunParallel = ...;     // Parallel processing mode
BOPAlgo_MakeConnected aMC;               // Tool for making the shapes connected
aMC.SetArguments(anArguments);           // Set the shapes
aMC.SetRunParallel(bRunParallel);        // Set parallel processing mode
aMC.Perform();                           // Perform the operation
if (aMC.HasErrors())                     // Check for the errors
{
  // errors treatment
  Standard_SStream aSStream;
  aMC.DumpErrors(aSStream);
  return;
}
if (aMC.HasWarnings())                   // Check for the warnings
{
  // warnings treatment
  Standard_SStream aSStream;
  aMC.DumpWarnings(aSStream);
}
const TopoDS_Shape& aGluedShape = aMC.Shape(); // Connected shape
// Checking material associations
TopAbs_ShapeEnum anElemType = ...;       // Type of border element
TopExp_Explorer anExp(anArguments.First(), anElemType);
for (; anExp.More(); anExp.Next())
{
  const TopoDS_Shape& anElement = anExp.Current();
  const TopTools_ListOfShape& aNegativeM = aMC.MaterialsOnNegativeSide(anElement);
  const TopTools_ListOfShape& aPositiveM = aMC.MaterialsOnPositiveSide(anElement);
}
// Making the connected shape periodic
BOPAlgo_MakePeriodic::PeriodicityParams aParams = ...; // Options for periodicity of the connected shape
aMC.MakePeriodic(aParams);
// Shape repetition after making it periodic
// Check if the shape has been made periodic successfully
if (aMC.PeriodicityTool().HasErrors())
{
  // Periodicity maker error treatment
}
// Shape repetition in periodic directions
aMC.RepeatShape(0, 2);
const TopoDS_Shape& aShape = aMC.PeriodicShape(); // Periodic and repeated shape

Constructor & Destructor Documentation

◆ BOPAlgo_MakeConnected()

BOPAlgo_MakeConnected::BOPAlgo_MakeConnected ( )

inline

Empty constructor.

Member Function Documentation

◆ AddArgument()

void BOPAlgo_MakeConnected::AddArgument ( const TopoDS_Shape & theS )

inline

Adds the shape to the arguments.

Parameters

theS	[in] One of the argument shapes.

◆ Arguments()

const TopTools_ListOfShape& BOPAlgo_MakeConnected::Arguments ( ) const

inline

Returns the list of arguments of the operation.

◆ AssociateMaterials()

void BOPAlgo_MakeConnected::AssociateMaterials ( )

protected

Associates the materials transitions for the border elements:

For input Solids, associates the Faces to Solids;
For input Faces, associates the Edges to Faces;
For input Edges, associates the Vertices to Edges.

◆ CheckData()

void BOPAlgo_MakeConnected::CheckData ( )

protected

Checks the validity of input data.

◆ Clear()

void BOPAlgo_MakeConnected::Clear ( )

inlinevirtual

Clears the contents of the algorithm.

Reimplemented from BOPAlgo_Options.

◆ ClearRepetitions()

void BOPAlgo_MakeConnected::ClearRepetitions ( )

Clears the repetitions performed on the periodic shape, keeping the shape periodic.

◆ FillOrigins()

void BOPAlgo_MakeConnected::FillOrigins ( )

protected

Fills the map of origins.

◆ GetModified()

const TopTools_ListOfShape& BOPAlgo_MakeConnected::GetModified ( const TopoDS_Shape & theS )

inline

Returns the list of shapes modified from the given shape.

Parameters

theS	[in] The shape for which the modified shapes are necessary.

◆ GetOrigins()

const TopTools_ListOfShape& BOPAlgo_MakeConnected::GetOrigins ( const TopoDS_Shape & theS )

inline

Returns the list of original shapes from which the current shape has been created.

Parameters

theS	[in] The shape for which the origins are necessary.

◆ History()

const Handle< BRepTools_History >& BOPAlgo_MakeConnected::History ( ) const

inline

Returns the history of operations.

◆ MakeConnected()

void BOPAlgo_MakeConnected::MakeConnected ( )

protected

Makes the argument shapes connected (or glued).

◆ MakePeriodic()

void BOPAlgo_MakeConnected::MakePeriodic ( const BOPAlgo_MakePeriodic::PeriodicityParams & theParams )

Makes the connected shape periodic. Repeated calls of this method overwrite the previous calls working with the basis connected shape.

Parameters

theParams [in] Periodic options.

◆ MaterialsOnNegativeSide()

const TopTools_ListOfShape& BOPAlgo_MakeConnected::MaterialsOnNegativeSide ( const TopoDS_Shape & theS )

inline

Returns the original shapes which images contain the the given shape with REVERSED orientation.

Parameters

theS	[in] The shape for which the materials are necessary.

◆ MaterialsOnPositiveSide()

const TopTools_ListOfShape& BOPAlgo_MakeConnected::MaterialsOnPositiveSide ( const TopoDS_Shape & theS )

inline

Returns the original shapes which images contain the the given shape with FORWARD orientation.

Parameters

theS	[in] The shape for which the materials are necessary.

◆ Perform()

void BOPAlgo_MakeConnected::Perform ( )

Performs the operation, i.e. makes the input shapes connected.

◆ PeriodicityTool()

const BOPAlgo_MakePeriodic& BOPAlgo_MakeConnected::PeriodicityTool ( ) const

inline

Returns the periodicity tool.

◆ PeriodicShape()

const TopoDS_Shape& BOPAlgo_MakeConnected::PeriodicShape ( ) const

inline

Returns the resulting periodic & repeated shape.

◆ RepeatShape()

void BOPAlgo_MakeConnected::RepeatShape	(	const Standard_Integer	theDirectionID,
		const Standard_Integer	theTimes
	)

Performs repetition of the periodic shape in specified direction required number of times.

Parameters

theDirectionID	[in] The direction's ID (0 for X, 1 for Y, 2 for Z);
theTimes	[in] Requested number of repetitions (sign of the value defines the side of the repetition direction (positive or negative)).

◆ SetArguments()

void BOPAlgo_MakeConnected::SetArguments ( const TopTools_ListOfShape & theArgs )

inline

Sets the shape for making them connected.

Parameters

theArgs [in] The arguments for the operation.

◆ Shape()

const TopoDS_Shape& BOPAlgo_MakeConnected::Shape ( ) const

inline

Returns the resulting connected shape.

◆ Update()

void BOPAlgo_MakeConnected::Update ( )

protected

Updates the history, material associations, origins map after periodicity operations.

Field Documentation

◆ myAllInputsMap

TopTools_IndexedMapOfShape BOPAlgo_MakeConnected::myAllInputsMap

protected

Map of all BRep sub-elements of the input shapes.

◆ myArguments

TopTools_ListOfShape BOPAlgo_MakeConnected::myArguments

protected

Input shapes for making them connected.

◆ myGlued

TopoDS_Shape BOPAlgo_MakeConnected::myGlued

protected

The resulting connected (glued) shape.

◆ myGlueHistory

Handle< BRepTools_History > BOPAlgo_MakeConnected::myGlueHistory

protected

Gluing History.

◆ myHistory

Handle< BRepTools_History > BOPAlgo_MakeConnected::myHistory

protected

Final History of shapes modifications (including making the shape periodic and repetitions)

◆ myMaterials

NCollection_DataMap<TopoDS_Shape, TopTools_ListOfShape, TopTools_OrientedShapeMapHasher> BOPAlgo_MakeConnected::myMaterials

protected

Map of the materials associations for the border elements.

◆ myOrigins

TopTools_DataMapOfShapeListOfShape BOPAlgo_MakeConnected::myOrigins

protected

Map of origins (allows tracking the shape's ancestors)

◆ myPeriodicityMaker

BOPAlgo_MakePeriodic BOPAlgo_MakeConnected::myPeriodicityMaker

protected

Tool for making the shape periodic.

◆ myShape

TopoDS_Shape BOPAlgo_MakeConnected::myShape

protected

The resulting shape.

The documentation for this class was generated from the following file:

BOPAlgo_MakeConnected.hxx

BOPAlgo_MakeConnected Class Reference

Public Member Functions

Protected Attributes

Protected methods performing the operation

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ BOPAlgo_MakeConnected()

Member Function Documentation

◆ AddArgument()

◆ Arguments()

◆ AssociateMaterials()

◆ CheckData()

◆ Clear()

◆ ClearRepetitions()

◆ FillOrigins()

◆ GetModified()

◆ GetOrigins()

◆ History()

◆ MakeConnected()

◆ MakePeriodic()

◆ MaterialsOnNegativeSide()

◆ MaterialsOnPositiveSide()

◆ Perform()

◆ PeriodicityTool()

◆ PeriodicShape()

◆ RepeatShape()

◆ SetArguments()

◆ Shape()

◆ Update()

Field Documentation

◆ myAllInputsMap

◆ myArguments

◆ myGlued

◆ myGlueHistory

◆ myHistory

◆ myMaterials

◆ myOrigins

◆ myPeriodicityMaker

◆ myShape