A framework providing advanced tolerance control. It is used to build Shapes. If tolerance control is required, you are advised to: More...

#include <BRep_Builder.hxx>

Inheritance diagram for BRep_Builder:

[legend]

Public Member Functions
void	MakeFace (TopoDS_Face &F) const
	Makes an undefined Face. More...

void	MakeFace (TopoDS_Face &F, const Handle< Geom_Surface > &S, const Standard_Real Tol) const
	Makes a Face with a surface. More...

void	MakeFace (TopoDS_Face &F, const Handle< Geom_Surface > &S, const TopLoc_Location &L, const Standard_Real Tol) const
	Makes a Face with a surface and a location. More...

void	MakeFace (TopoDS_Face &F, const Handle< Poly_Triangulation > &T) const
	Makes a Face with a triangulation. The triangulation is in the same reference system than the TFace. More...

void	UpdateFace (const TopoDS_Face &F, const Handle< Geom_Surface > &S, const TopLoc_Location &L, const Standard_Real Tol) const
	Updates the face F using the tolerance value Tol, surface S and location Location. More...

void	UpdateFace (const TopoDS_Face &F, const Handle< Poly_Triangulation > &T) const
	Changes a face triangulation. More...

void	UpdateFace (const TopoDS_Face &F, const Standard_Real Tol) const
	Updates the face Tolerance. More...

void	NaturalRestriction (const TopoDS_Face &F, const Standard_Boolean N) const
	Sets the NaturalRestriction flag of the face. More...

void	MakeEdge (TopoDS_Edge &E) const
	Makes an undefined Edge (no geometry). More...

void	MakeEdge (TopoDS_Edge &E, const Handle< Geom_Curve > &C, const Standard_Real Tol) const
	Makes an Edge with a curve. More...

void	MakeEdge (TopoDS_Edge &E, const Handle< Geom_Curve > &C, const TopLoc_Location &L, const Standard_Real Tol) const
	Makes an Edge with a curve and a location. More...

void	MakeEdge (TopoDS_Edge &E, const Handle< Poly_Polygon3D > &P) const
	Makes an Edge with a polygon 3d. More...

void	MakeEdge (TopoDS_Edge &E, const Handle< Poly_PolygonOnTriangulation > &N, const Handle< Poly_Triangulation > &T) const
	makes an Edge polygon on Triangulation. More...

void	MakeEdge (TopoDS_Edge &E, const Handle< Poly_PolygonOnTriangulation > &N, const Handle< Poly_Triangulation > &T, const TopLoc_Location &L) const
	makes an Edge polygon on Triangulation. More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Geom_Curve > &C, const Standard_Real Tol) const
	Sets a 3D curve for the edge. If `is a null handle, remove any existing 3d curve.` More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Geom_Curve > &C, const TopLoc_Location &L, const Standard_Real Tol) const
	Sets a 3D curve for the edge. If `is a null handle, remove any existing 3d curve.` More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Geom2d_Curve > &C, const TopoDS_Face &F, const Standard_Real Tol) const
	Sets a pcurve for the edge on the face. If `is a null handle, remove any existing pcurve.` More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Geom2d_Curve > &C1, const Handle< Geom2d_Curve > &C2, const TopoDS_Face &F, const Standard_Real Tol) const
	Sets pcurves for the edge on the closed face. If <C1> or <C2> is a null handle, remove any existing pcurve. More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S, const TopLoc_Location &L, const Standard_Real Tol) const
	Sets a pcurve for the edge on the face. If `is a null handle, remove any existing pcurve.` More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S, const TopLoc_Location &L, const Standard_Real Tol, const gp_Pnt2d &Pf, const gp_Pnt2d &Pl) const
	Sets a pcurve for the edge on the face. If `is a null handle, remove any existing pcurve. Sets UV bounds for curve repsentation.` More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Geom2d_Curve > &C1, const Handle< Geom2d_Curve > &C2, const Handle< Geom_Surface > &S, const TopLoc_Location &L, const Standard_Real Tol) const
	Sets pcurves for the edge on the closed surface. <C1> or <C2> is a null handle, remove any existing pcurve. More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Geom2d_Curve > &C1, const Handle< Geom2d_Curve > &C2, const Handle< Geom_Surface > &S, const TopLoc_Location &L, const Standard_Real Tol, const gp_Pnt2d &Pf, const gp_Pnt2d &Pl) const
	Sets pcurves for the edge on the closed surface. <C1> or <C2> is a null handle, remove any existing pcurve. Sets UV bounds for curve repsentation. More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Poly_Polygon3D > &P) const
	Changes an Edge 3D polygon. A null Polygon removes the 3d Polygon. More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Poly_Polygon3D > &P, const TopLoc_Location &L) const
	Changes an Edge 3D polygon. A null Polygon removes the 3d Polygon. More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Poly_PolygonOnTriangulation > &N, const Handle< Poly_Triangulation > &T) const
	Changes an Edge polygon on Triangulation. More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Poly_PolygonOnTriangulation > &N, const Handle< Poly_Triangulation > &T, const TopLoc_Location &L) const
	Changes an Edge polygon on Triangulation. More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Poly_PolygonOnTriangulation > &N1, const Handle< Poly_PolygonOnTriangulation > &N2, const Handle< Poly_Triangulation > &T) const
	Changes an Edge polygon on Triangulation. More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Poly_PolygonOnTriangulation > &N1, const Handle< Poly_PolygonOnTriangulation > &N2, const Handle< Poly_Triangulation > &T, const TopLoc_Location &L) const
	Changes an Edge polygon on Triangulation. More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Poly_Polygon2D > &P, const TopoDS_Face &S) const
	Changes Edge polygon on a face. More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Poly_Polygon2D > &P, const Handle< Geom_Surface > &S, const TopLoc_Location &T) const
	Changes Edge polygon on a face. More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Poly_Polygon2D > &P1, const Handle< Poly_Polygon2D > &P2, const TopoDS_Face &S) const
	Changes Edge polygons on a face. More...

void	UpdateEdge (const TopoDS_Edge &E, const Handle< Poly_Polygon2D > &P1, const Handle< Poly_Polygon2D > &P2, const Handle< Geom_Surface > &S, const TopLoc_Location &L) const
	Changes Edge polygons on a face. More...

void	UpdateEdge (const TopoDS_Edge &E, const Standard_Real Tol) const
	Updates the edge tolerance. More...

void	Continuity (const TopoDS_Edge &E, const TopoDS_Face &F1, const TopoDS_Face &F2, const GeomAbs_Shape C) const
	Sets the geometric continuity on the edge. More...

void	Continuity (const TopoDS_Edge &E, const Handle< Geom_Surface > &S1, const Handle< Geom_Surface > &S2, const TopLoc_Location &L1, const TopLoc_Location &L2, const GeomAbs_Shape C) const
	Sets the geometric continuity on the edge. More...

void	SameParameter (const TopoDS_Edge &E, const Standard_Boolean S) const
	Sets the same parameter flag for the edge <E>. More...

void	SameRange (const TopoDS_Edge &E, const Standard_Boolean S) const
	Sets the same range flag for the edge <E>. More...

void	Degenerated (const TopoDS_Edge &E, const Standard_Boolean D) const
	Sets the degenerated flag for the edge <E>. More...

void	Range (const TopoDS_Edge &E, const Standard_Real First, const Standard_Real Last, const Standard_Boolean Only3d=Standard_False) const
	Sets the range of the 3d curve if Only3d=TRUE, otherwise sets the range to all the representations. More...

void	Range (const TopoDS_Edge &E, const Handle< Geom_Surface > &S, const TopLoc_Location &L, const Standard_Real First, const Standard_Real Last) const
	Sets the range of the edge on the pcurve on the surface. More...

void	Range (const TopoDS_Edge &E, const TopoDS_Face &F, const Standard_Real First, const Standard_Real Last) const
	Sets the range of the edge on the pcurve on the face. More...

void	Transfert (const TopoDS_Edge &Ein, const TopoDS_Edge &Eout) const
	Add to <Eout> the geometric representations of <Ein>. More...

void	MakeVertex (TopoDS_Vertex &V) const
	Makes an udefined vertex without geometry. More...

void	MakeVertex (TopoDS_Vertex &V, const gp_Pnt &P, const Standard_Real Tol) const
	Makes a vertex from a 3D point. More...

void	UpdateVertex (const TopoDS_Vertex &V, const gp_Pnt &P, const Standard_Real Tol) const
	Sets a 3D point on the vertex. More...

void	UpdateVertex (const TopoDS_Vertex &V, const Standard_Real P, const TopoDS_Edge &E, const Standard_Real Tol) const
	Sets the parameter for the vertex on the edge curves. More...

void	UpdateVertex (const TopoDS_Vertex &V, const Standard_Real P, const TopoDS_Edge &E, const TopoDS_Face &F, const Standard_Real Tol) const
	Sets the parameter for the vertex on the edge pcurve on the face. More...

void	UpdateVertex (const TopoDS_Vertex &V, const Standard_Real P, const TopoDS_Edge &E, const Handle< Geom_Surface > &S, const TopLoc_Location &L, const Standard_Real Tol) const
	Sets the parameter for the vertex on the edge pcurve on the surface. More...

void	UpdateVertex (const TopoDS_Vertex &Ve, const Standard_Real U, const Standard_Real V, const TopoDS_Face &F, const Standard_Real Tol) const
	Sets the parameters for the vertex on the face. More...

void	UpdateVertex (const TopoDS_Vertex &V, const Standard_Real Tol) const
	Updates the vertex tolerance. More...

void	Transfert (const TopoDS_Edge &Ein, const TopoDS_Edge &Eout, const TopoDS_Vertex &Vin, const TopoDS_Vertex &Vout) const
	Transfert the parameters of Vin on Ein as the parameter of Vout on Eout. More...

Public Member Functions inherited from TopoDS_Builder
void	MakeWire (TopoDS_Wire &W) const
	Make an empty Wire. More...

void	MakeShell (TopoDS_Shell &S) const
	Make an empty Shell. More...

void	MakeSolid (TopoDS_Solid &S) const
	Make a Solid covering the whole 3D space. More...

void	MakeCompSolid (TopoDS_CompSolid &C) const
	Make an empty Composite Solid. More...

void	MakeCompound (TopoDS_Compound &C) const
	Make an empty Compound. More...

void	Add (TopoDS_Shape &S, const TopoDS_Shape &C) const
	Add the Shape C in the Shape S. Exceptions. More...

void	Remove (TopoDS_Shape &S, const TopoDS_Shape &C) const
	Remove the Shape C from the Shape S. Exceptions TopoDS_FrozenShape if S is frozen and cannot be modified. More...

Additional Inherited Members
Protected Member Functions inherited from TopoDS_Builder
void	MakeShape (TopoDS_Shape &S, const Handle< TopoDS_TShape > &T) const
	The basic method to make a Shape, used by all the Make methods. More...

Detailed Description

A framework providing advanced tolerance control. It is used to build Shapes. If tolerance control is required, you are advised to:

build a default precision for topology, using the classes provided in the BRepAPI package
update the tolerance of the resulting shape. Note that only vertices, edges and faces have meaningful tolerance control. The tolerance value must always comply with the condition that face tolerances are more restrictive than edge tolerances which are more restrictive than vertex tolerances. In other words: Tol(Vertex) >= Tol(Edge) >= Tol(Face). Other rules in setting tolerance include:

you can open up tolerance but should never restrict it
an edge cannot be included within the fusion of the tolerance spheres of two vertices

Member Function Documentation

◆ Continuity() [1/2]

void BRep_Builder::Continuity	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F1,
		const TopoDS_Face &	F2,
		const GeomAbs_Shape	C
	)		const

Sets the geometric continuity on the edge.

◆ Continuity() [2/2]

void BRep_Builder::Continuity	(	const TopoDS_Edge &	E,
		const Handle< Geom_Surface > &	S1,
		const Handle< Geom_Surface > &	S2,
		const TopLoc_Location &	L1,
		const TopLoc_Location &	L2,
		const GeomAbs_Shape	C
	)		const

Sets the geometric continuity on the edge.

◆ Degenerated()

void BRep_Builder::Degenerated	(	const TopoDS_Edge &	E,
		const Standard_Boolean	D
	)		const

Sets the degenerated flag for the edge <E>.

◆ MakeEdge() [1/6]

void BRep_Builder::MakeEdge ( TopoDS_Edge & E ) const

Makes an undefined Edge (no geometry).

◆ MakeEdge() [2/6]

void BRep_Builder::MakeEdge	(	TopoDS_Edge &	E,
		const Handle< Geom_Curve > &	C,
		const Standard_Real	Tol
	)		const

Makes an Edge with a curve.

◆ MakeEdge() [3/6]

void BRep_Builder::MakeEdge	(	TopoDS_Edge &	E,
		const Handle< Geom_Curve > &	C,
		const TopLoc_Location &	L,
		const Standard_Real	Tol
	)		const

Makes an Edge with a curve and a location.

◆ MakeEdge() [4/6]

void BRep_Builder::MakeEdge	(	TopoDS_Edge &	E,
		const Handle< Poly_Polygon3D > &	P
	)		const

Makes an Edge with a polygon 3d.

◆ MakeEdge() [5/6]

void BRep_Builder::MakeEdge	(	TopoDS_Edge &	E,
		const Handle< Poly_PolygonOnTriangulation > &	N,
		const Handle< Poly_Triangulation > &	T
	)		const

makes an Edge polygon on Triangulation.

◆ MakeEdge() [6/6]

void BRep_Builder::MakeEdge	(	TopoDS_Edge &	E,
		const Handle< Poly_PolygonOnTriangulation > &	N,
		const Handle< Poly_Triangulation > &	T,
		const TopLoc_Location &	L
	)		const

makes an Edge polygon on Triangulation.

◆ MakeFace() [1/4]

void BRep_Builder::MakeFace ( TopoDS_Face & F ) const

Makes an undefined Face.

◆ MakeFace() [2/4]

void BRep_Builder::MakeFace	(	TopoDS_Face &	F,
		const Handle< Geom_Surface > &	S,
		const Standard_Real	Tol
	)		const

Makes a Face with a surface.

◆ MakeFace() [3/4]

void BRep_Builder::MakeFace	(	TopoDS_Face &	F,
		const Handle< Geom_Surface > &	S,
		const TopLoc_Location &	L,
		const Standard_Real	Tol
	)		const

Makes a Face with a surface and a location.

◆ MakeFace() [4/4]

void BRep_Builder::MakeFace	(	TopoDS_Face &	F,
		const Handle< Poly_Triangulation > &	T
	)		const

Makes a Face with a triangulation. The triangulation is in the same reference system than the TFace.

◆ MakeVertex() [1/2]

void BRep_Builder::MakeVertex ( TopoDS_Vertex & V ) const

Makes an udefined vertex without geometry.

◆ MakeVertex() [2/2]

void BRep_Builder::MakeVertex	(	TopoDS_Vertex &	V,
		const gp_Pnt &	P,
		const Standard_Real	Tol
	)		const

Makes a vertex from a 3D point.

◆ NaturalRestriction()

void BRep_Builder::NaturalRestriction	(	const TopoDS_Face &	F,
		const Standard_Boolean	N
	)		const

Sets the NaturalRestriction flag of the face.

◆ Range() [1/3]

void BRep_Builder::Range	(	const TopoDS_Edge &	E,
		const Standard_Real	First,
		const Standard_Real	Last,
		const Standard_Boolean	Only3d = `Standard_False`
	)		const

Sets the range of the 3d curve if Only3d=TRUE, otherwise sets the range to all the representations.

◆ Range() [2/3]

void BRep_Builder::Range	(	const TopoDS_Edge &	E,
		const Handle< Geom_Surface > &	S,
		const TopLoc_Location &	L,
		const Standard_Real	First,
		const Standard_Real	Last
	)		const

Sets the range of the edge on the pcurve on the surface.

◆ Range() [3/3]

void BRep_Builder::Range	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F,
		const Standard_Real	First,
		const Standard_Real	Last
	)		const

Sets the range of the edge on the pcurve on the face.

◆ SameParameter()

void BRep_Builder::SameParameter	(	const TopoDS_Edge &	E,
		const Standard_Boolean	S
	)		const

Sets the same parameter flag for the edge <E>.

◆ SameRange()

void BRep_Builder::SameRange	(	const TopoDS_Edge &	E,
		const Standard_Boolean	S
	)		const

Sets the same range flag for the edge <E>.

◆ Transfert() [1/2]

void BRep_Builder::Transfert	(	const TopoDS_Edge &	Ein,
		const TopoDS_Edge &	Eout
	)		const

Add to <Eout> the geometric representations of <Ein>.

◆ Transfert() [2/2]

void BRep_Builder::Transfert	(	const TopoDS_Edge &	Ein,
		const TopoDS_Edge &	Eout,
		const TopoDS_Vertex &	Vin,
		const TopoDS_Vertex &	Vout
	)		const

Transfert the parameters of Vin on Ein as the parameter of Vout on Eout.

◆ UpdateEdge() [1/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Geom_Curve > &	C,
		const Standard_Real	Tol
	)		const

Sets a 3D curve for the edge. If is a null handle, remove any existing 3d curve.

◆ UpdateEdge() [2/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Geom_Curve > &	C,
		const TopLoc_Location &	L,
		const Standard_Real	Tol
	)		const

Sets a 3D curve for the edge. If is a null handle, remove any existing 3d curve.

◆ UpdateEdge() [3/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Geom2d_Curve > &	C,
		const TopoDS_Face &	F,
		const Standard_Real	Tol
	)		const

Sets a pcurve for the edge on the face. If is a null handle, remove any existing pcurve.

◆ UpdateEdge() [4/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Geom2d_Curve > &	C1,
		const Handle< Geom2d_Curve > &	C2,
		const TopoDS_Face &	F,
		const Standard_Real	Tol
	)		const

Sets pcurves for the edge on the closed face. If <C1> or <C2> is a null handle, remove any existing pcurve.

◆ UpdateEdge() [5/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S,
		const TopLoc_Location &	L,
		const Standard_Real	Tol
	)		const

Sets a pcurve for the edge on the face. If is a null handle, remove any existing pcurve.

◆ UpdateEdge() [6/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S,
		const TopLoc_Location &	L,
		const Standard_Real	Tol,
		const gp_Pnt2d &	Pf,
		const gp_Pnt2d &	Pl
	)		const

Sets a pcurve for the edge on the face. If is a null handle, remove any existing pcurve. Sets UV bounds for curve repsentation.

◆ UpdateEdge() [7/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Geom2d_Curve > &	C1,
		const Handle< Geom2d_Curve > &	C2,
		const Handle< Geom_Surface > &	S,
		const TopLoc_Location &	L,
		const Standard_Real	Tol
	)		const

Sets pcurves for the edge on the closed surface. <C1> or <C2> is a null handle, remove any existing pcurve.

◆ UpdateEdge() [8/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Geom2d_Curve > &	C1,
		const Handle< Geom2d_Curve > &	C2,
		const Handle< Geom_Surface > &	S,
		const TopLoc_Location &	L,
		const Standard_Real	Tol,
		const gp_Pnt2d &	Pf,
		const gp_Pnt2d &	Pl
	)		const

Sets pcurves for the edge on the closed surface. <C1> or <C2> is a null handle, remove any existing pcurve. Sets UV bounds for curve repsentation.

◆ UpdateEdge() [9/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Poly_Polygon3D > &	P
	)		const

Changes an Edge 3D polygon. A null Polygon removes the 3d Polygon.

◆ UpdateEdge() [10/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Poly_Polygon3D > &	P,
		const TopLoc_Location &	L
	)		const

Changes an Edge 3D polygon. A null Polygon removes the 3d Polygon.

◆ UpdateEdge() [11/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Poly_PolygonOnTriangulation > &	N,
		const Handle< Poly_Triangulation > &	T
	)		const

Changes an Edge polygon on Triangulation.

◆ UpdateEdge() [12/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Poly_PolygonOnTriangulation > &	N,
		const Handle< Poly_Triangulation > &	T,
		const TopLoc_Location &	L
	)		const

Changes an Edge polygon on Triangulation.

◆ UpdateEdge() [13/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Poly_PolygonOnTriangulation > &	N1,
		const Handle< Poly_PolygonOnTriangulation > &	N2,
		const Handle< Poly_Triangulation > &	T
	)		const

Changes an Edge polygon on Triangulation.

◆ UpdateEdge() [14/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Poly_PolygonOnTriangulation > &	N1,
		const Handle< Poly_PolygonOnTriangulation > &	N2,
		const Handle< Poly_Triangulation > &	T,
		const TopLoc_Location &	L
	)		const

Changes an Edge polygon on Triangulation.

◆ UpdateEdge() [15/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Poly_Polygon2D > &	P,
		const TopoDS_Face &	S
	)		const

Changes Edge polygon on a face.

◆ UpdateEdge() [16/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Poly_Polygon2D > &	P,
		const Handle< Geom_Surface > &	S,
		const TopLoc_Location &	T
	)		const

Changes Edge polygon on a face.

◆ UpdateEdge() [17/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Poly_Polygon2D > &	P1,
		const Handle< Poly_Polygon2D > &	P2,
		const TopoDS_Face &	S
	)		const

Changes Edge polygons on a face.

A null Polygon removes the 2d Polygon.

◆ UpdateEdge() [18/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Handle< Poly_Polygon2D > &	P1,
		const Handle< Poly_Polygon2D > &	P2,
		const Handle< Geom_Surface > &	S,
		const TopLoc_Location &	L
	)		const

Changes Edge polygons on a face.

A null Polygon removes the 2d Polygon.

◆ UpdateEdge() [19/19]

void BRep_Builder::UpdateEdge	(	const TopoDS_Edge &	E,
		const Standard_Real	Tol
	)		const

Updates the edge tolerance.

◆ UpdateFace() [1/3]

void BRep_Builder::UpdateFace	(	const TopoDS_Face &	F,
		const Handle< Geom_Surface > &	S,
		const TopLoc_Location &	L,
		const Standard_Real	Tol
	)		const

Updates the face F using the tolerance value Tol, surface S and location Location.

◆ UpdateFace() [2/3]

void BRep_Builder::UpdateFace	(	const TopoDS_Face &	F,
		const Handle< Poly_Triangulation > &	T
	)		const

Changes a face triangulation.

A null Triangulation removes the triangulation.

◆ UpdateFace() [3/3]

void BRep_Builder::UpdateFace	(	const TopoDS_Face &	F,
		const Standard_Real	Tol
	)		const

Updates the face Tolerance.

◆ UpdateVertex() [1/6]

void BRep_Builder::UpdateVertex	(	const TopoDS_Vertex &	V,
		const gp_Pnt &	P,
		const Standard_Real	Tol
	)		const

Sets a 3D point on the vertex.

◆ UpdateVertex() [2/6]

void BRep_Builder::UpdateVertex	(	const TopoDS_Vertex &	V,
		const Standard_Real	P,
		const TopoDS_Edge &	E,
		const Standard_Real	Tol
	)		const

Sets the parameter for the vertex on the edge curves.

◆ UpdateVertex() [3/6]

void BRep_Builder::UpdateVertex	(	const TopoDS_Vertex &	V,
		const Standard_Real	P,
		const TopoDS_Edge &	E,
		const TopoDS_Face &	F,
		const Standard_Real	Tol
	)		const

Sets the parameter for the vertex on the edge pcurve on the face.

◆ UpdateVertex() [4/6]

void BRep_Builder::UpdateVertex	(	const TopoDS_Vertex &	V,
		const Standard_Real	P,
		const TopoDS_Edge &	E,
		const Handle< Geom_Surface > &	S,
		const TopLoc_Location &	L,
		const Standard_Real	Tol
	)		const

Sets the parameter for the vertex on the edge pcurve on the surface.

◆ UpdateVertex() [5/6]

void BRep_Builder::UpdateVertex	(	const TopoDS_Vertex &	Ve,
		const Standard_Real	U,
		const Standard_Real	V,
		const TopoDS_Face &	F,
		const Standard_Real	Tol
	)		const

Sets the parameters for the vertex on the face.

◆ UpdateVertex() [6/6]

void BRep_Builder::UpdateVertex	(	const TopoDS_Vertex &	V,
		const Standard_Real	Tol
	)		const

Updates the vertex tolerance.

The documentation for this class was generated from the following file:

BRep_Builder.hxx

BRep_Builder Class Reference

Public Member Functions

Additional Inherited Members

Detailed Description

Member Function Documentation

◆ Continuity() [1/2]

◆ Continuity() [2/2]

◆ Degenerated()

◆ MakeEdge() [1/6]

◆ MakeEdge() [2/6]

◆ MakeEdge() [3/6]

◆ MakeEdge() [4/6]

◆ MakeEdge() [5/6]

◆ MakeEdge() [6/6]

◆ MakeFace() [1/4]

◆ MakeFace() [2/4]

◆ MakeFace() [3/4]

◆ MakeFace() [4/4]

◆ MakeVertex() [1/2]

◆ MakeVertex() [2/2]

◆ NaturalRestriction()

◆ Range() [1/3]

◆ Range() [2/3]

◆ Range() [3/3]

◆ SameParameter()

◆ SameRange()

◆ Transfert() [1/2]

◆ Transfert() [2/2]

◆ UpdateEdge() [1/19]

◆ UpdateEdge() [2/19]

◆ UpdateEdge() [3/19]

◆ UpdateEdge() [4/19]

◆ UpdateEdge() [5/19]

◆ UpdateEdge() [6/19]

◆ UpdateEdge() [7/19]

◆ UpdateEdge() [8/19]

◆ UpdateEdge() [9/19]

◆ UpdateEdge() [10/19]

◆ UpdateEdge() [11/19]

◆ UpdateEdge() [12/19]

◆ UpdateEdge() [13/19]

◆ UpdateEdge() [14/19]

◆ UpdateEdge() [15/19]

◆ UpdateEdge() [16/19]

◆ UpdateEdge() [17/19]

◆ UpdateEdge() [18/19]

◆ UpdateEdge() [19/19]

◆ UpdateFace() [1/3]

◆ UpdateFace() [2/3]

◆ UpdateFace() [3/3]

◆ UpdateVertex() [1/6]

◆ UpdateVertex() [2/6]

◆ UpdateVertex() [3/6]

◆ UpdateVertex() [4/6]

◆ UpdateVertex() [5/6]

◆ UpdateVertex() [6/6]