BRepBlend_RstRstLineBuilder Class Reference

This class processes the data resulting from Blend_CSWalking but it takes in consideration the Surface supporting the curve to detect the breakpoint. More...

#include <BRepBlend_RstRstLineBuilder.hxx>

Public Member Functions
	BRepBlend_RstRstLineBuilder (const Handle< Adaptor3d_HSurface > &Surf1, const Handle< Adaptor2d_HCurve2d > &Rst1, const Handle< Adaptor3d_TopolTool > &Domain1, const Handle< Adaptor3d_HSurface > &Surf2, const Handle< Adaptor2d_HCurve2d > &Rst2, const Handle< Adaptor3d_TopolTool > &Domain2)
void	Perform (Blend_RstRstFunction &Func, Blend_SurfCurvFuncInv &Finv1, Blend_CurvPointFuncInv &FinvP1, Blend_SurfCurvFuncInv &Finv2, Blend_CurvPointFuncInv &FinvP2, const Standard_Real Pdep, const Standard_Real Pmax, const Standard_Real MaxStep, const Standard_Real TolGuide, const math_Vector &Soldep, const Standard_Real Tolesp, const Standard_Real Fleche, const Standard_Boolean Appro=Standard_False)
Standard_Boolean	PerformFirstSection (Blend_RstRstFunction &Func, Blend_SurfCurvFuncInv &Finv1, Blend_CurvPointFuncInv &FinvP1, Blend_SurfCurvFuncInv &Finv2, Blend_CurvPointFuncInv &FinvP2, const Standard_Real Pdep, const Standard_Real Pmax, const math_Vector &Soldep, const Standard_Real Tolesp, const Standard_Real TolGuide, const Standard_Boolean RecRst1, const Standard_Boolean RecP1, const Standard_Boolean RecRst2, const Standard_Boolean RecP2, Standard_Real &Psol, math_Vector &ParSol)
Standard_Boolean	Complete (Blend_RstRstFunction &Func, Blend_SurfCurvFuncInv &Finv1, Blend_CurvPointFuncInv &FinvP1, Blend_SurfCurvFuncInv &Finv2, Blend_CurvPointFuncInv &FinvP2, const Standard_Real Pmin)
Standard_Boolean	IsDone () const
const Handle< BRepBlend_Line > &	Line () const
Standard_Boolean	Decroch1Start () const
Standard_Boolean	Decroch1End () const
Standard_Boolean	Decroch2Start () const
Standard_Boolean	Decroch2End () const

Detailed Description

This class processes the data resulting from Blend_CSWalking but it takes in consideration the Surface supporting the curve to detect the breakpoint.

As a result, the criteria of distribution of points on the line become more flexible because it should calculate values approached by an approximation of continued functions based on the Blend_RstRstFunction.

Thus this pseudo path necessitates 3 criteria of regrouping :

1) exit of the domain of the curve

2) exit of the domain of the surface

3) stall as there is a solution of problem surf/surf within the domain of the surface of support of the restriction.

Construction of a BRepBlend_Line between two pcurves from an approached starting solution. The output entries of this builder are of the same nature as of a traditional walking, but the requirements to the Line are not the same. If the determination of validity range is always guaranteed, the criteria of correct repartition of sections before smoothing are not respected. The resulting Line is f(t) oriented.

Constructor & Destructor Documentation

BRepBlend_RstRstLineBuilder()

BRepBlend_RstRstLineBuilder::BRepBlend_RstRstLineBuilder	(	const Handle< Adaptor3d_HSurface > &	Surf1,
		const Handle< Adaptor2d_HCurve2d > &	Rst1,
		const Handle< Adaptor3d_TopolTool > &	Domain1,
		const Handle< Adaptor3d_HSurface > &	Surf2,
		const Handle< Adaptor2d_HCurve2d > &	Rst2,
		const Handle< Adaptor3d_TopolTool > &	Domain2
	)

Member Function Documentation

Complete()

Standard_Boolean BRepBlend_RstRstLineBuilder::Complete	(	Blend_RstRstFunction &	Func,
		Blend_SurfCurvFuncInv &	Finv1,
		Blend_CurvPointFuncInv &	FinvP1,
		Blend_SurfCurvFuncInv &	Finv2,
		Blend_CurvPointFuncInv &	FinvP2,
		const Standard_Real	Pmin
	)

Decroch1End()

Standard_Boolean BRepBlend_RstRstLineBuilder::Decroch1End

(

)

const

Decroch1Start()

Standard_Boolean BRepBlend_RstRstLineBuilder::Decroch1Start

(

)

const

Decroch2End()

Standard_Boolean BRepBlend_RstRstLineBuilder::Decroch2End

(

)

const

Decroch2Start()

Standard_Boolean BRepBlend_RstRstLineBuilder::Decroch2Start

(

)

const

IsDone()

Standard_Boolean BRepBlend_RstRstLineBuilder::IsDone

(

)

const

Line()

const Handle< BRepBlend_Line >& BRepBlend_RstRstLineBuilder::Line

(

)

const

Perform()

void BRepBlend_RstRstLineBuilder::Perform	(	Blend_RstRstFunction &	Func,
		Blend_SurfCurvFuncInv &	Finv1,
		Blend_CurvPointFuncInv &	FinvP1,
		Blend_SurfCurvFuncInv &	Finv2,
		Blend_CurvPointFuncInv &	FinvP2,
		const Standard_Real	Pdep,
		const Standard_Real	Pmax,
		const Standard_Real	MaxStep,
		const Standard_Real	TolGuide,
		const math_Vector &	Soldep,
		const Standard_Real	Tolesp,
		const Standard_Real	Fleche,
		const Standard_Boolean	Appro = Standard_False
	)

PerformFirstSection()

Standard_Boolean BRepBlend_RstRstLineBuilder::PerformFirstSection	(	Blend_RstRstFunction &	Func,
		Blend_SurfCurvFuncInv &	Finv1,
		Blend_CurvPointFuncInv &	FinvP1,
		Blend_SurfCurvFuncInv &	Finv2,
		Blend_CurvPointFuncInv &	FinvP2,
		const Standard_Real	Pdep,
		const Standard_Real	Pmax,
		const math_Vector &	Soldep,
		const Standard_Real	Tolesp,
		const Standard_Real	TolGuide,
		const Standard_Boolean	RecRst1,
		const Standard_Boolean	RecP1,
		const Standard_Boolean	RecRst2,
		const Standard_Boolean	RecP2,
		Standard_Real &	Psol,
		math_Vector &	ParSol
	)

---

The documentation for this class was generated from the following file:

• BRepBlend_RstRstLineBuilder.hxx