Created on: 2015-04-24 Created by: NIKOLAI BUKHALOV Copyright (c) 2015 OPEN CASCADE SAS. More...
#include <BRepBuilderAPI_FastSewing.hxx>
Inheritance diagram for BRepBuilderAPI_FastSewing:
Data Structures | |
| class | FS_Edge |
| The struct corresponding to a edge. More... | |
| struct | FS_Face |
| The struct corresponding to an face. More... | |
| struct | FS_Vertex |
| The struct corresponding to a vertex. More... | |
| class | NodeInspector |
| This inspector will find a node nearest to the given point not far than on the given tolerance. More... | |
Public Types | |
| enum | FS_Statuses { FS_OK = 0x00000000, FS_Degenerated = 0x00000001, FS_FindVertexError = 0x00000002, FS_FindEdgeError = 0x00000004, FS_FaceWithNullSurface = 0x00000008, FS_NotNaturalBoundsFace = 0x00000010, FS_InfiniteSurface = 0x00000020, FS_EmptyInput = 0x00000040, FS_Exception = 0x00000080 } |
| Enumeration of result statuses. More... | |
| typedef unsigned int | FS_VARStatuses |
 Public Types inherited from Standard_Transient | |
| typedef void | base_type |
| Returns a type descriptor about this object. More... | |
Public Member Functions | |
| BRepBuilderAPI_FastSewing (const Standard_Real theTolerance=1.0e-06) | |
| Creates an object with tolerance of connexity. More... | |
| Standard_Boolean | Add (const TopoDS_Shape &theShape) |
| Adds faces of a shape. More... | |
| Standard_Boolean | Add (const Handle< Geom_Surface > &theSurface) |
| Adds a surface. More... | |
| void | Perform (void) |
| Compute resulted shape. More... | |
| void | SetTolerance (const Standard_Real theToler) |
| Sets tolerance. More... | |
| Standard_Real | GetTolerance () const |
| Returns tolerance. More... | |
| const TopoDS_Shape & | GetResult () const |
| Returns resulted shape. More... | |
| FS_VARStatuses | GetStatuses (Standard_OStream *const theOS=0) |
| Returns list of statuses. Print message if theOS != 0. More... | |
| Public Member Functions inherited from Standard_Transient | |
| Standard_Transient () | |
| Empty constructor. More... | |
| Standard_Transient (const Standard_Transient &) | |
| Copy constructor – does nothing. More... | |
| Standard_Transient & | operator= (const Standard_Transient &) |
| Assignment operator, needed to avoid copying reference counter. More... | |
| virtual | ~Standard_Transient () |
| Destructor must be virtual. More... | |
| virtual void | Delete () const |
| Memory deallocator for transient classes. More... | |
| virtual const opencascade::handle< Standard_Type > & | DynamicType () const |
| Returns a type descriptor about this object. More... | |
| Standard_Boolean | IsInstance (const opencascade::handle< Standard_Type > &theType) const |
| Returns a true value if this is an instance of Type. More... | |
| Standard_Boolean | IsInstance (const Standard_CString theTypeName) const |
| Returns a true value if this is an instance of TypeName. More... | |
| Standard_Boolean | IsKind (const opencascade::handle< Standard_Type > &theType) const |
| Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Boolean | IsKind (const Standard_CString theTypeName) const |
| Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Transient * | This () const |
| Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More... | |
| Standard_Integer | GetRefCount () const |
| Get the reference counter of this object. More... | |
| void | IncrementRefCounter () const |
| Increments the reference counter of this object. More... | |
| Standard_Integer | DecrementRefCounter () const |
| Decrements the reference counter of this object; returns the decremented value. More... | |
Protected Member Functions | |
| void | FindVertexes (const Standard_Integer theSurfID, NCollection_CellFilter< NodeInspector > &theCells) |
| void | FindEdges (const Standard_Integer theSurfID) |
| void | UpdateEdgeInfo (const Standard_Integer theIDPrevVertex, const Standard_Integer theIDCurrVertex, const Standard_Integer theFaceID, const Standard_Integer theIDCurvOnFace) |
| void | CreateNewEdge (const Standard_Integer theIDPrevVertex, const Standard_Integer theIDCurrVertex, const Standard_Integer theFaceID, const Standard_Integer theIDCurvOnFace) |
| Standard_Real | Compute3DRange () |
| FS_VARStatuses | SetStatus (FS_Statuses theStatus) |
| Sets status. Returns numeric value of the status set. More... | |
Additional Inherited Members | |
| Static Public Member Functions inherited from Standard_Transient | |
| static const char * | get_type_name () |
| Returns a type descriptor about this object. More... | |
| static const opencascade::handle< Standard_Type > & | get_type_descriptor () |
| Returns type descriptor of Standard_Transient class. More... | |
Detailed Description
Created on: 2015-04-24 Created by: NIKOLAI BUKHALOV Copyright (c) 2015 OPEN CASCADE SAS.
This file is part of Open CASCADE Technology software library.
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License version 2.1 as published by the Free Software Foundation, with special exception defined in the file OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT distribution for complete text of the license and disclaimer of any warranty.
Alternatively, this file may be used under the terms of Open CASCADE commercial license or contractual agreement. This class performs fast sewing of surfaces (faces). It supposes that all surfaces are finite and are naturally restricted by their bounds. Moreover, it supposes that stitched together surfaces have the same parameterization along common boundaries, therefore it does not perform time-consuming check for SameParameter property of edges.
For sewing, use this function as following:
- set tolerance value (default tolerance is 1.E-06)
- add all necessary surfaces (faces)
- check status if adding is correctly completed.
- compute -> Perform
- retrieve the error status if any
- retrieve the resulted shape
Member Typedef Documentation
◆ FS_VARStatuses
| typedef unsigned int BRepBuilderAPI_FastSewing::FS_VARStatuses |
Member Enumeration Documentation
◆ FS_Statuses
Constructor & Destructor Documentation
◆ BRepBuilderAPI_FastSewing()
| BRepBuilderAPI_FastSewing::BRepBuilderAPI_FastSewing | ( | const Standard_Real | theTolerance = 1.0e-06 | ) |
Creates an object with tolerance of connexity.
Member Function Documentation
◆ Add() [1/2]
| Standard_Boolean BRepBuilderAPI_FastSewing::Add | ( | const TopoDS_Shape & | theShape | ) |
Adds faces of a shape.
◆ Add() [2/2]
| Standard_Boolean BRepBuilderAPI_FastSewing::Add | ( | const Handle< Geom_Surface > & | theSurface | ) |
Adds a surface.
◆ Compute3DRange()
|
protected |
◆ CreateNewEdge()
|
protected |
◆ FindEdges()
|
protected |
◆ FindVertexes()
|
protected |
◆ GetResult()
|
inline |
Returns resulted shape.
◆ GetStatuses()
| FS_VARStatuses BRepBuilderAPI_FastSewing::GetStatuses | ( | Standard_OStream *const | theOS = 0 | ) |
Returns list of statuses. Print message if theOS != 0.
◆ GetTolerance()
|
inline |
Returns tolerance.
◆ Perform()
| void BRepBuilderAPI_FastSewing::Perform | ( | void | ) |
Compute resulted shape.
◆ SetStatus()
|
inlineprotected |
Sets status. Returns numeric value of the status set.
◆ SetTolerance()
|
inline |
Sets tolerance.
◆ UpdateEdgeInfo()
|
protected |
The documentation for this class was generated from the following file:
