Class implementing Metallic-Roughness physically based material definition. More...

#include <Graphic3d_PBRMaterial.hxx>

Public Member Functions
	Graphic3d_PBRMaterial ()
	Creates new physically based material in Metallic-Roughness system. 'metallic' parameter is 0 by default. 'roughness' parameter is 1 by default. 'color' parameter is (0, 0, 0) by default. 'alpha' parameter is 1 by default. 'IOR' parameter is 1.5 by default. 'emission' parameter is (0, 0, 0) by default. More...

	Graphic3d_PBRMaterial (const Graphic3d_BSDF &theBSDF)
	Creates new physically based material in Metallic-Roughness system from Graphic3d_BSDF. More...

Standard_ShortReal	Metallic () const
	Returns material's metallic coefficient in [0, 1] range. 1 for metals and 0 for dielectrics. It is preferable to be exactly 0 or 1. Average values are needed for textures mixing in shader. More...

void	SetMetallic (Standard_ShortReal theMetallic)
	Modifies metallic coefficient of material in [0, 1] range. More...

Standard_ShortReal	Roughness () const
	Returns real value of roughness in [MinRoughness, 1] range for calculations. More...

Standard_ShortReal	NormalizedRoughness () const
	Returns roughness mapping parameter in [0, 1] range. Roughness is defined in [0, 1] for handful material settings and is mapped to [MinRoughness, 1] for calculations. More...

void	SetRoughness (Standard_ShortReal theRoughness)
	Modifies roughness coefficient of material in [0, 1] range. More...

Standard_ShortReal	IOR () const
	Returns index of refraction in [1, 3] range. More...

void	SetIOR (Standard_ShortReal theIOR)
	Modifies index of refraction in [1, 3] range. In practice affects only on non-metal materials reflection possibilities. More...

const Quantity_ColorRGBA &	Color () const
	Returns albedo color with alpha component of material. More...

void	SetColor (const Quantity_ColorRGBA &theColor)
	Modifies albedo color with alpha component. More...

void	SetColor (const Quantity_Color &theColor)
	Modifies only albedo color. More...

Standard_ShortReal	Alpha () const
	Returns alpha component in range [0, 1]. More...

void	SetAlpha (Standard_ShortReal theAlpha)
	Modifies alpha component. More...

Graphic3d_Vec3	Emission () const
	Returns light intensity emitted by material. Values are greater or equal 0. More...

void	SetEmission (const Graphic3d_Vec3 &theEmission)
	Modifies light intensity emitted by material. More...

void	SetBSDF (const Graphic3d_BSDF &theBSDF)
	Generates material in Metallic-Roughness system from Graphic3d_BSDF. More...

Standard_Boolean	operator== (const Graphic3d_PBRMaterial &theOther) const
	PBR materials comparison operator. More...

void	DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const
	Dumps the content of me into the stream. More...

Static Public Member Functions
static Standard_ShortReal	Roughness (Standard_ShortReal theNormalizedRoughness)
	Maps roughness from [0, 1] to [MinRoughness, 1] for calculations. More...

static void	GenerateEnvLUT (const Handle< Image_PixMap > &theLUT, unsigned int theNbIntegralSamples=1024)
	Generates 2D look up table of scale and bias for fresnell zero coefficient. It is needed for calculation reflectance part of environment lighting. More...

static Standard_ShortReal	RoughnessFromSpecular (const Quantity_Color &theSpecular, const Standard_Real theShiness)
	Compute material roughness from common material (specular color + shininess). More...

static Standard_ShortReal	MetallicFromSpecular (const Quantity_Color &theSpecular)
	Compute material metallicity from common material (specular color). More...

static Standard_ShortReal	MinRoughness ()
	Roughness cannot be 0 in real calculations, so it returns minimal achievable level of roughness in practice. More...

static Standard_ShortReal	SpecIBLMapSamplesFactor (Standard_ShortReal theProbability, Standard_ShortReal theRoughness)
	Shows how much times less samples can be used in certain roughness value specular IBL map generation in compare with samples number for map with roughness of 1. Specular IBL maps with less roughness values have higher resolution but require less samples for the same quality of baking. So that reducing samples number is good strategy to improve performance of baking. The samples number for specular IBL map with roughness of 1 (the maximum possible samples number) is expected to be defined as baking parameter. Samples number for other roughness values can be calculated by multiplication origin samples number by this factor. More...

Detailed Description

Class implementing Metallic-Roughness physically based material definition.

Constructor & Destructor Documentation

◆ Graphic3d_PBRMaterial() [1/2]

Graphic3d_PBRMaterial::Graphic3d_PBRMaterial ( )

Creates new physically based material in Metallic-Roughness system. 'metallic' parameter is 0 by default. 'roughness' parameter is 1 by default. 'color' parameter is (0, 0, 0) by default. 'alpha' parameter is 1 by default. 'IOR' parameter is 1.5 by default. 'emission' parameter is (0, 0, 0) by default.

◆ Graphic3d_PBRMaterial() [2/2]

Graphic3d_PBRMaterial::Graphic3d_PBRMaterial ( const Graphic3d_BSDF & theBSDF )

Creates new physically based material in Metallic-Roughness system from Graphic3d_BSDF.

Member Function Documentation

◆ Alpha()

Standard_ShortReal Graphic3d_PBRMaterial::Alpha ( ) const

inline

Returns alpha component in range [0, 1].

◆ Color()

const Quantity_ColorRGBA& Graphic3d_PBRMaterial::Color ( ) const

inline

Returns albedo color with alpha component of material.

◆ DumpJson()

void Graphic3d_PBRMaterial::DumpJson	(	Standard_OStream &	theOStream,
		Standard_Integer	theDepth = `-1`
	)		const

Dumps the content of me into the stream.

◆ Emission()

Graphic3d_Vec3 Graphic3d_PBRMaterial::Emission ( ) const

inline

Returns light intensity emitted by material. Values are greater or equal 0.

◆ GenerateEnvLUT()

static void Graphic3d_PBRMaterial::GenerateEnvLUT	(	const Handle< Image_PixMap > &	theLUT,
		unsigned int	theNbIntegralSamples = `1024`
	)

static

Generates 2D look up table of scale and bias for fresnell zero coefficient. It is needed for calculation reflectance part of environment lighting.

Parameters

[out]	theLUT	table storage (must be Image_Format_RGF).
[in]	theIntegralSamplesCount	number of importance samples in hemisphere integral calculation for every table item.

◆ IOR()

Standard_ShortReal Graphic3d_PBRMaterial::IOR ( ) const

inline

Returns index of refraction in [1, 3] range.

◆ Metallic()

Standard_ShortReal Graphic3d_PBRMaterial::Metallic ( ) const

inline

Returns material's metallic coefficient in [0, 1] range. 1 for metals and 0 for dielectrics. It is preferable to be exactly 0 or 1. Average values are needed for textures mixing in shader.

◆ MetallicFromSpecular()

static Standard_ShortReal Graphic3d_PBRMaterial::MetallicFromSpecular ( const Quantity_Color & theSpecular )

inlinestatic

Compute material metallicity from common material (specular color).

Parameters

theSpecular [in] specular color

Returns: metallicity within [0..1] range

◆ MinRoughness()

static Standard_ShortReal Graphic3d_PBRMaterial::MinRoughness ( )

inlinestatic

Roughness cannot be 0 in real calculations, so it returns minimal achievable level of roughness in practice.

◆ NormalizedRoughness()

Standard_ShortReal Graphic3d_PBRMaterial::NormalizedRoughness ( ) const

inline

Returns roughness mapping parameter in [0, 1] range. Roughness is defined in [0, 1] for handful material settings and is mapped to [MinRoughness, 1] for calculations.

◆ operator==()

Standard_Boolean Graphic3d_PBRMaterial::operator== ( const Graphic3d_PBRMaterial & theOther ) const

inline

PBR materials comparison operator.

◆ Roughness() [1/2]

static Standard_ShortReal Graphic3d_PBRMaterial::Roughness ( Standard_ShortReal theNormalizedRoughness )

static

Maps roughness from [0, 1] to [MinRoughness, 1] for calculations.

◆ Roughness() [2/2]

Standard_ShortReal Graphic3d_PBRMaterial::Roughness ( ) const

inline

Returns real value of roughness in [MinRoughness, 1] range for calculations.

◆ RoughnessFromSpecular()

static Standard_ShortReal Graphic3d_PBRMaterial::RoughnessFromSpecular	(	const Quantity_Color &	theSpecular,
		const Standard_Real	theShiness
	)

static

Compute material roughness from common material (specular color + shininess).

Parameters

theSpecular	[in] specular color
theShiness	[in] normalized shininess coefficient within [0..1] range

Returns: roughness within [0..1] range

◆ SetAlpha()

void Graphic3d_PBRMaterial::SetAlpha ( Standard_ShortReal theAlpha )

Modifies alpha component.

◆ SetBSDF()

void Graphic3d_PBRMaterial::SetBSDF ( const Graphic3d_BSDF & theBSDF )

Generates material in Metallic-Roughness system from Graphic3d_BSDF.

◆ SetColor() [1/2]

void Graphic3d_PBRMaterial::SetColor ( const Quantity_ColorRGBA & theColor )

Modifies albedo color with alpha component.

◆ SetColor() [2/2]

void Graphic3d_PBRMaterial::SetColor ( const Quantity_Color & theColor )

Modifies only albedo color.

◆ SetEmission()

void Graphic3d_PBRMaterial::SetEmission ( const Graphic3d_Vec3 & theEmission )

Modifies light intensity emitted by material.

◆ SetIOR()

void Graphic3d_PBRMaterial::SetIOR ( Standard_ShortReal theIOR )

Modifies index of refraction in [1, 3] range. In practice affects only on non-metal materials reflection possibilities.

◆ SetMetallic()

void Graphic3d_PBRMaterial::SetMetallic ( Standard_ShortReal theMetallic )

Modifies metallic coefficient of material in [0, 1] range.

◆ SetRoughness()

void Graphic3d_PBRMaterial::SetRoughness ( Standard_ShortReal theRoughness )

Modifies roughness coefficient of material in [0, 1] range.

◆ SpecIBLMapSamplesFactor()

static Standard_ShortReal Graphic3d_PBRMaterial::SpecIBLMapSamplesFactor	(	Standard_ShortReal	theProbability,
		Standard_ShortReal	theRoughness
	)

static

Shows how much times less samples can be used in certain roughness value specular IBL map generation in compare with samples number for map with roughness of 1. Specular IBL maps with less roughness values have higher resolution but require less samples for the same quality of baking. So that reducing samples number is good strategy to improve performance of baking. The samples number for specular IBL map with roughness of 1 (the maximum possible samples number) is expected to be defined as baking parameter. Samples number for other roughness values can be calculated by multiplication origin samples number by this factor.

Parameters

theProbability	value from 0 to 1 controlling strength of samples reducing. Bigger values result in slower reduction to provide better quality but worse performance. Value of 1 doesn't affect at all so that 1 will be returned (it can be used to disable reduction strategy).
theRoughness	roughness value of current generated specular IBL map (from 0 to 1).

Returns: factor to calculate number of samples for current specular IBL map baking. Be aware! It has no obligation to return 1 in case of roughness of 1. Be aware! It produces poor quality with small number of origin samples. In that case it is recommended to be disabled.

The documentation for this class was generated from the following file:

Graphic3d_PBRMaterial.hxx

Graphic3d_PBRMaterial Class Reference

Public Member Functions

Static Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ Graphic3d_PBRMaterial() [1/2]

◆ Graphic3d_PBRMaterial() [2/2]

Member Function Documentation

◆ Alpha()

◆ Color()

◆ DumpJson()

◆ Emission()

◆ GenerateEnvLUT()

◆ IOR()

◆ Metallic()

◆ MetallicFromSpecular()

◆ MinRoughness()

◆ NormalizedRoughness()

◆ operator==()

◆ Roughness() [1/2]

◆ Roughness() [2/2]

◆ RoughnessFromSpecular()

◆ SetAlpha()

◆ SetBSDF()

◆ SetColor() [1/2]

◆ SetColor() [2/2]

◆ SetEmission()

◆ SetIOR()

◆ SetMetallic()

◆ SetRoughness()

◆ SpecIBLMapSamplesFactor()