Provides methods to transfer topologic surfaces entities from IGES to CASCADE. More...

#include <IGESToBRep_TopoSurface.hxx>

Inheritance diagram for IGESToBRep_TopoSurface:

Public Member Functions
	IGESToBRep_TopoSurface ()
	Creates a tool TopoSurface ready to run, with epsilons set to 1.E-04, TheModeTopo to True, the optimization of the continuity to False. More...

	IGESToBRep_TopoSurface (const IGESToBRep_CurveAndSurface &CS)
	Creates a tool TopoSurface ready to run and sets its fields as CS's. More...

	IGESToBRep_TopoSurface (const Standard_Real eps, const Standard_Real epsGeom, const Standard_Real epsCoeff, const Standard_Boolean mode, const Standard_Boolean modeapprox, const Standard_Boolean optimized)
	Creates a tool TopoSurface ready to run. More...

TopoDS_Shape	TransferTopoSurface (const Handle< IGESData_IGESEntity > &start)

TopoDS_Shape	TransferTopoBasicSurface (const Handle< IGESData_IGESEntity > &start)

TopoDS_Shape	TransferRuledSurface (const Handle< IGESGeom_RuledSurface > &start)

TopoDS_Shape	TransferSurfaceOfRevolution (const Handle< IGESGeom_SurfaceOfRevolution > &start)

TopoDS_Shape	TransferTabulatedCylinder (const Handle< IGESGeom_TabulatedCylinder > &start)

TopoDS_Shape	TransferOffsetSurface (const Handle< IGESGeom_OffsetSurface > &start)

TopoDS_Shape	TransferTrimmedSurface (const Handle< IGESGeom_TrimmedSurface > &start)

TopoDS_Shape	TransferBoundedSurface (const Handle< IGESGeom_BoundedSurface > &start)

TopoDS_Shape	TransferPlane (const Handle< IGESGeom_Plane > &start)

TopoDS_Shape	TransferPlaneSurface (const Handle< IGESSolid_PlaneSurface > &start)

TopoDS_Shape	TransferPerforate (const Handle< IGESBasic_SingleParent > &start)

TopoDS_Shape	ParamSurface (const Handle< IGESData_IGESEntity > &start, gp_Trsf2d &trans, Standard_Real &uFact)

Public Member Functions inherited from IGESToBRep_CurveAndSurface
	IGESToBRep_CurveAndSurface ()
	Creates a tool CurveAndSurface ready to run, with epsilons set to 1.E-04, myModeTopo to True, the optimization of the continuity to False. More...

	IGESToBRep_CurveAndSurface (const Standard_Real eps, const Standard_Real epsGeom, const Standard_Real epsCoeff, const Standard_Boolean mode, const Standard_Boolean modeapprox, const Standard_Boolean optimized)
	Creates a tool CurveAndSurface ready to run. More...

void	Init ()
	Initializes the field of the tool CurveAndSurface with default creating values. More...

void	SetEpsilon (const Standard_Real eps)
	Changes the value of "myEps". More...

Standard_Real	GetEpsilon () const
	Returns the value of "myEps". More...

void	SetEpsCoeff (const Standard_Real eps)
	Changes the value of "myEpsCoeff". More...

Standard_Real	GetEpsCoeff () const
	Returns the value of "myEpsCoeff". More...

void	SetEpsGeom (const Standard_Real eps)
	Changes the value of "myEpsGeom". More...

Standard_Real	GetEpsGeom () const
	Returns the value of "myEpsGeom". More...

void	SetMinTol (const Standard_Real mintol)
	Changes the value of "myMinTol". More...

void	SetMaxTol (const Standard_Real maxtol)
	Changes the value of "myMaxTol". More...

void	UpdateMinMaxTol ()
	Sets values of "myMinTol" and "myMaxTol" as follows myMaxTol = Max ("read.maxprecision.val", myEpsGeom * myUnitFactor) myMinTol = Precision::Confusion() Remark: This method is automatically invoked each time the values of "myEpsGeom" or "myUnitFactor" are changed. More...

Standard_Real	GetMinTol () const
	Returns the value of "myMinTol". More...

Standard_Real	GetMaxTol () const
	Returns the value of "myMaxTol". More...

void	SetModeApprox (const Standard_Boolean mode)
	Changes the value of "myModeApprox". More...

Standard_Boolean	GetModeApprox () const
	Returns the value of "myModeApprox". More...

void	SetModeTransfer (const Standard_Boolean mode)
	Changes the value of "myModeIsTopo". More...

Standard_Boolean	GetModeTransfer () const
	Returns the value of "myModeIsTopo". More...

void	SetOptimized (const Standard_Boolean optimized)
	Changes the value of "myContIsOpti". More...

Standard_Boolean	GetOptimized () const
	Returns the value of "myContIsOpti". More...

Standard_Real	GetUnitFactor () const
	Returns the value of " myUnitFactor". More...

void	SetSurfaceCurve (const Standard_Integer ival)
	Changes the value of "mySurfaceCurve". More...

Standard_Integer	GetSurfaceCurve () const
	Returns the value of " mySurfaceCurve" 0 = value in file , 2 = kepp 2d and compute 3d 3 = keep 3d and compute 2d. More...

void	SetModel (const Handle< IGESData_IGESModel > &model)
	Set the value of "myModel". More...

Handle< IGESData_IGESModel >	GetModel () const
	Returns the value of "myModel". More...

void	SetContinuity (const Standard_Integer continuity)
	Changes the value of "myContinuity" if continuity = 0 do nothing else if continuity = 1 try C1 if continuity = 2 try C2. More...

Standard_Integer	GetContinuity () const
	Returns the value of "myContinuity". More...

void	SetTransferProcess (const Handle< Transfer_TransientProcess > &TP)
	Set the value of "myMsgReg". More...

Handle< Transfer_TransientProcess >	GetTransferProcess () const
	Returns the value of "myMsgReg". More...

TopoDS_Shape	TransferCurveAndSurface (const Handle< IGESData_IGESEntity > &start, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Returns the result of the transfert of any IGES Curve or Surface Entity. If the transfer has failed, this member return a NullEntity. More...

TopoDS_Shape	TransferGeometry (const Handle< IGESData_IGESEntity > &start, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Returns the result of the transfert the geometry of any IGESEntity. If the transfer has failed, this member return a NullEntity. More...

void	SendFail (const Handle< IGESData_IGESEntity > &start, const Message_Msg &amsg)
	Records a new Fail message. More...

void	SendWarning (const Handle< IGESData_IGESEntity > &start, const Message_Msg &amsg)
	Records a new Warning message. More...

void	SendMsg (const Handle< IGESData_IGESEntity > &start, const Message_Msg &amsg)
	Records a new Information message from the definition of a Msg (Original+Value) More...

Standard_Boolean	HasShapeResult (const Handle< IGESData_IGESEntity > &start) const
	Returns True if start was already treated and has a result in "myMap" else returns False. More...

TopoDS_Shape	GetShapeResult (const Handle< IGESData_IGESEntity > &start) const
	Returns the result of the transfer of the IGESEntity "start" contained in "myMap" . (if HasShapeResult is True). More...

void	SetShapeResult (const Handle< IGESData_IGESEntity > &start, const TopoDS_Shape &result)
	set in "myMap" the result of the transfer of the IGESEntity "start". More...

Standard_Integer	NbShapeResult (const Handle< IGESData_IGESEntity > &start) const
	Returns the number of shapes results contained in "myMap" for the IGESEntity start ( type VertexList or EdgeList). More...

TopoDS_Shape	GetShapeResult (const Handle< IGESData_IGESEntity > &start, const Standard_Integer num) const
	Returns the numth result of the IGESEntity start (type VertexList or EdgeList) in "myMap". (if NbShapeResult is not null). More...

void	AddShapeResult (const Handle< IGESData_IGESEntity > &start, const TopoDS_Shape &result)
	set in "myMap" the result of the transfer of the entity of the IGESEntity start ( type VertexList or EdgeList). More...

void	SetSurface (const Handle< Geom_Surface > &theSurface)

Handle< Geom_Surface >	Surface () const

Standard_Real	GetUVResolution ()

Detailed Description

Provides methods to transfer topologic surfaces entities from IGES to CASCADE.

Constructor & Destructor Documentation

◆ IGESToBRep_TopoSurface() [1/3]

IGESToBRep_TopoSurface::IGESToBRep_TopoSurface ( )

Creates a tool TopoSurface ready to run, with epsilons set to 1.E-04, TheModeTopo to True, the optimization of the continuity to False.

◆ IGESToBRep_TopoSurface() [2/3]

IGESToBRep_TopoSurface::IGESToBRep_TopoSurface ( const IGESToBRep_CurveAndSurface & CS )

Creates a tool TopoSurface ready to run and sets its fields as CS's.

◆ IGESToBRep_TopoSurface() [3/3]

IGESToBRep_TopoSurface::IGESToBRep_TopoSurface	(	const Standard_Real	eps,
		const Standard_Real	epsGeom,
		const Standard_Real	epsCoeff,
		const Standard_Boolean	mode,
		const Standard_Boolean	modeapprox,
		const Standard_Boolean	optimized
	)

Creates a tool TopoSurface ready to run.

Member Function Documentation

◆ ParamSurface()

TopoDS_Shape IGESToBRep_TopoSurface::ParamSurface	(	const Handle< IGESData_IGESEntity > &	start,
		gp_Trsf2d &	trans,
		Standard_Real &	uFact
	)

◆ TransferBoundedSurface()

TopoDS_Shape IGESToBRep_TopoSurface::TransferBoundedSurface ( const Handle< IGESGeom_BoundedSurface > & start )

◆ TransferOffsetSurface()

TopoDS_Shape IGESToBRep_TopoSurface::TransferOffsetSurface ( const Handle< IGESGeom_OffsetSurface > & start )

◆ TransferPerforate()

TopoDS_Shape IGESToBRep_TopoSurface::TransferPerforate ( const Handle< IGESBasic_SingleParent > & start )

◆ TransferPlane()

TopoDS_Shape IGESToBRep_TopoSurface::TransferPlane ( const Handle< IGESGeom_Plane > & start )

◆ TransferPlaneSurface()

TopoDS_Shape IGESToBRep_TopoSurface::TransferPlaneSurface ( const Handle< IGESSolid_PlaneSurface > & start )

◆ TransferRuledSurface()

TopoDS_Shape IGESToBRep_TopoSurface::TransferRuledSurface ( const Handle< IGESGeom_RuledSurface > & start )

◆ TransferSurfaceOfRevolution()

TopoDS_Shape IGESToBRep_TopoSurface::TransferSurfaceOfRevolution ( const Handle< IGESGeom_SurfaceOfRevolution > & start )

◆ TransferTabulatedCylinder()

TopoDS_Shape IGESToBRep_TopoSurface::TransferTabulatedCylinder ( const Handle< IGESGeom_TabulatedCylinder > & start )

◆ TransferTopoBasicSurface()

TopoDS_Shape IGESToBRep_TopoSurface::TransferTopoBasicSurface ( const Handle< IGESData_IGESEntity > & start )

◆ TransferTopoSurface()

TopoDS_Shape IGESToBRep_TopoSurface::TransferTopoSurface ( const Handle< IGESData_IGESEntity > & start )

◆ TransferTrimmedSurface()

TopoDS_Shape IGESToBRep_TopoSurface::TransferTrimmedSurface ( const Handle< IGESGeom_TrimmedSurface > & start )

The documentation for this class was generated from the following file:

IGESToBRep_TopoSurface.hxx

IGESToBRep_TopoSurface Class Reference

Public Member Functions