A framework to define the display of planes. More...

#include <Prs3d_PlaneAspect.hxx>

Inheritance diagram for Prs3d_PlaneAspect:

Public Member Functions
	Prs3d_PlaneAspect ()
	Constructs an empty framework for the display of planes. More...

const Handle< Prs3d_LineAspect > &	EdgesAspect () const
	Returns the attributes of displayed edges involved in the presentation of planes. More...

const Handle< Prs3d_LineAspect > &	IsoAspect () const
	Returns the attributes of displayed isoparameters involved in the presentation of planes. More...

const Handle< Prs3d_LineAspect > &	ArrowAspect () const
	Returns the settings for displaying an arrow. More...

void	SetArrowsLength (const Standard_Real theLength)

Standard_Real	ArrowsLength () const
	Returns the length of the arrow shaft used in the display of arrows. More...

void	SetArrowsSize (const Standard_Real theSize)
	Sets the angle of the arrowhead used in the display of planes. More...

Standard_Real	ArrowsSize () const
	Returns the size of arrows used in the display of planes. More...

void	SetArrowsAngle (const Standard_Real theAngle)
	Sets the angle of the arrowhead used in the display of arrows involved in the presentation of planes. More...

Standard_Real	ArrowsAngle () const
	Returns the angle of the arrowhead used in the display of arrows involved in the presentation of planes. More...

void	SetDisplayCenterArrow (const Standard_Boolean theToDraw)
	Sets the display attributes defined in DisplayCenterArrow to active. More...

Standard_Boolean	DisplayCenterArrow () const
	Returns true if the display of center arrows is allowed. More...

void	SetDisplayEdgesArrows (const Standard_Boolean theToDraw)
	Sets the display attributes defined in DisplayEdgesArrows to active. More...

Standard_Boolean	DisplayEdgesArrows () const
	Returns true if the display of edge arrows is allowed. More...

void	SetDisplayEdges (const Standard_Boolean theToDraw)

Standard_Boolean	DisplayEdges () const

void	SetDisplayIso (const Standard_Boolean theToDraw)
	Sets the display attributes defined in DisplayIso to active. More...

Standard_Boolean	DisplayIso () const
	Returns true if the display of isoparameters is allowed. More...

void	SetPlaneLength (const Standard_Real theLX, const Standard_Real theLY)

Standard_Real	PlaneXLength () const
	Returns the length of the x axis used in the display of planes. More...

Standard_Real	PlaneYLength () const
	Returns the length of the y axis used in the display of planes. More...

void	SetIsoDistance (const Standard_Real theL)
	Sets the distance L between isoparameters used in the display of planes. More...

Standard_Real	IsoDistance () const
	Returns the distance between isoparameters used in the display of planes. More...

virtual void	DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const override
	Dumps the content of me into the stream. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

A framework to define the display of planes.

Constructor & Destructor Documentation

◆ Prs3d_PlaneAspect()

Prs3d_PlaneAspect::Prs3d_PlaneAspect ( )

Constructs an empty framework for the display of planes.

Member Function Documentation

◆ ArrowAspect()

const Handle< Prs3d_LineAspect >& Prs3d_PlaneAspect::ArrowAspect ( ) const

inline

Returns the settings for displaying an arrow.

◆ ArrowsAngle()

Standard_Real Prs3d_PlaneAspect::ArrowsAngle ( ) const

inline

Returns the angle of the arrowhead used in the display of arrows involved in the presentation of planes.

◆ ArrowsLength()

Standard_Real Prs3d_PlaneAspect::ArrowsLength ( ) const

inline

Returns the length of the arrow shaft used in the display of arrows.

◆ ArrowsSize()

Standard_Real Prs3d_PlaneAspect::ArrowsSize ( ) const

inline

Returns the size of arrows used in the display of planes.

◆ DisplayCenterArrow()

Standard_Boolean Prs3d_PlaneAspect::DisplayCenterArrow ( ) const

inline

Returns true if the display of center arrows is allowed.

◆ DisplayEdges()

Standard_Boolean Prs3d_PlaneAspect::DisplayEdges ( ) const

inline

◆ DisplayEdgesArrows()

Standard_Boolean Prs3d_PlaneAspect::DisplayEdgesArrows ( ) const

inline

Returns true if the display of edge arrows is allowed.

◆ DisplayIso()

Standard_Boolean Prs3d_PlaneAspect::DisplayIso ( ) const

inline

Returns true if the display of isoparameters is allowed.

◆ DumpJson()

virtual void Prs3d_PlaneAspect::DumpJson	(	Standard_OStream &	theOStream,
		Standard_Integer	theDepth = `-1`
	)		const

overridevirtual

Dumps the content of me into the stream.

Implements Prs3d_BasicAspect.

◆ EdgesAspect()

const Handle< Prs3d_LineAspect >& Prs3d_PlaneAspect::EdgesAspect ( ) const

inline

Returns the attributes of displayed edges involved in the presentation of planes.

◆ IsoAspect()

const Handle< Prs3d_LineAspect >& Prs3d_PlaneAspect::IsoAspect ( ) const

inline

Returns the attributes of displayed isoparameters involved in the presentation of planes.

◆ IsoDistance()

Standard_Real Prs3d_PlaneAspect::IsoDistance ( ) const

inline

Returns the distance between isoparameters used in the display of planes.

◆ PlaneXLength()

Standard_Real Prs3d_PlaneAspect::PlaneXLength ( ) const

inline

Returns the length of the x axis used in the display of planes.

◆ PlaneYLength()

Standard_Real Prs3d_PlaneAspect::PlaneYLength ( ) const

inline

Returns the length of the y axis used in the display of planes.

◆ SetArrowsAngle()

void Prs3d_PlaneAspect::SetArrowsAngle ( const Standard_Real theAngle )

inline

Sets the angle of the arrowhead used in the display of arrows involved in the presentation of planes.

◆ SetArrowsLength()

void Prs3d_PlaneAspect::SetArrowsLength ( const Standard_Real theLength )

inline

◆ SetArrowsSize()

void Prs3d_PlaneAspect::SetArrowsSize ( const Standard_Real theSize )

inline

Sets the angle of the arrowhead used in the display of planes.

◆ SetDisplayCenterArrow()

void Prs3d_PlaneAspect::SetDisplayCenterArrow ( const Standard_Boolean theToDraw )

inline

Sets the display attributes defined in DisplayCenterArrow to active.

◆ SetDisplayEdges()

void Prs3d_PlaneAspect::SetDisplayEdges ( const Standard_Boolean theToDraw )

inline

◆ SetDisplayEdgesArrows()

void Prs3d_PlaneAspect::SetDisplayEdgesArrows ( const Standard_Boolean theToDraw )

inline

Sets the display attributes defined in DisplayEdgesArrows to active.

◆ SetDisplayIso()

void Prs3d_PlaneAspect::SetDisplayIso ( const Standard_Boolean theToDraw )

inline

Sets the display attributes defined in DisplayIso to active.

◆ SetIsoDistance()

void Prs3d_PlaneAspect::SetIsoDistance ( const Standard_Real theL )

inline

Sets the distance L between isoparameters used in the display of planes.

◆ SetPlaneLength()

void Prs3d_PlaneAspect::SetPlaneLength	(	const Standard_Real	theLX,
		const Standard_Real	theLY
	)

inline

Field Documentation

◆ myArrowAspect

Handle< Prs3d_LineAspect > Prs3d_PlaneAspect::myArrowAspect

protected

◆ myArrowsAngle

Standard_Real Prs3d_PlaneAspect::myArrowsAngle

protected

◆ myArrowsLength

Standard_Real Prs3d_PlaneAspect::myArrowsLength

protected

◆ myArrowsSize

Standard_Real Prs3d_PlaneAspect::myArrowsSize

protected

◆ myDrawCenterArrow

Standard_Boolean Prs3d_PlaneAspect::myDrawCenterArrow

protected

◆ myDrawEdges

Standard_Boolean Prs3d_PlaneAspect::myDrawEdges

protected

◆ myDrawEdgesArrows

Standard_Boolean Prs3d_PlaneAspect::myDrawEdgesArrows

protected

◆ myDrawIso

Standard_Boolean Prs3d_PlaneAspect::myDrawIso

protected

◆ myEdgesAspect

Handle< Prs3d_LineAspect > Prs3d_PlaneAspect::myEdgesAspect

protected

◆ myIsoAspect

Handle< Prs3d_LineAspect > Prs3d_PlaneAspect::myIsoAspect

protected

◆ myIsoDistance

Standard_Real Prs3d_PlaneAspect::myIsoDistance

protected

◆ myPlaneXLength

Standard_Real Prs3d_PlaneAspect::myPlaneXLength

protected

◆ myPlaneYLength

Standard_Real Prs3d_PlaneAspect::myPlaneYLength

protected

The documentation for this class was generated from the following file:

Prs3d_PlaneAspect.hxx

Protected Attributes
Handle< Prs3d_LineAspect >	myEdgesAspect

Handle< Prs3d_LineAspect >	myIsoAspect

Handle< Prs3d_LineAspect >	myArrowAspect

Standard_Real	myArrowsLength

Standard_Real	myArrowsSize

Standard_Real	myArrowsAngle

Standard_Real	myPlaneXLength

Standard_Real	myPlaneYLength

Standard_Real	myIsoDistance

Standard_Boolean	myDrawCenterArrow

Standard_Boolean	myDrawEdgesArrows

Standard_Boolean	myDrawEdges

Standard_Boolean	myDrawIso

Prs3d_PlaneAspect Class Reference

Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ Prs3d_PlaneAspect()

Member Function Documentation

◆ ArrowAspect()

◆ ArrowsAngle()

◆ ArrowsLength()

◆ ArrowsSize()

◆ DisplayCenterArrow()

◆ DisplayEdges()

◆ DisplayEdgesArrows()

◆ DisplayIso()

◆ DumpJson()

◆ EdgesAspect()

◆ IsoAspect()

◆ IsoDistance()

◆ PlaneXLength()

◆ PlaneYLength()

◆ SetArrowsAngle()

◆ SetArrowsLength()

◆ SetArrowsSize()

◆ SetDisplayCenterArrow()

◆ SetDisplayEdges()

◆ SetDisplayEdgesArrows()

◆ SetDisplayIso()

◆ SetIsoDistance()

◆ SetPlaneLength()

Field Documentation

◆ myArrowAspect

◆ myArrowsAngle

◆ myArrowsLength

◆ myArrowsSize

◆ myDrawCenterArrow

◆ myDrawEdges

◆ myDrawEdgesArrows

◆ myDrawIso

◆ myEdgesAspect

◆ myIsoAspect

◆ myIsoDistance

◆ myPlaneXLength

◆ myPlaneYLength