Open CASCADE Technology  7.5.0
Public Member Functions | Protected Attributes

ShapeUpgrade_SplitSurface Class Reference

Splits a Surface with a criterion. More...

#include <ShapeUpgrade_SplitSurface.hxx>

Inheritance diagram for ShapeUpgrade_SplitSurface:
Inheritance graph
[legend]

Public Member Functions

 ShapeUpgrade_SplitSurface ()
 Empty constructor. More...
 
void Init (const Handle< Geom_Surface > &S)
 Initializes with single supporting surface. More...
 
void Init (const Handle< Geom_Surface > &S, const Standard_Real UFirst, const Standard_Real ULast, const Standard_Real VFirst, const Standard_Real VLast)
 Initializes with single supporting surface with bounding parameters. More...
 
void SetUSplitValues (const Handle< TColStd_HSequenceOfReal > &UValues)
 Sets U parameters where splitting has to be done. More...
 
void SetVSplitValues (const Handle< TColStd_HSequenceOfReal > &VValues)
 Sets V parameters where splitting has to be done. More...
 
virtual void Build (const Standard_Boolean Segment)
 Performs splitting of the supporting surface. If resulting surface is B-Spline and Segment is True, the result is composed with segments of the surface bounded by the U and V SplitValues (method Geom_BSplineSurface::Segment is used). If Segment is False, the result is composed with Geom_RectangularTrimmedSurface all based on the same complete surface. Fields myNbResultingRow and myNbResultingCol must be set to specify the size of resulting grid of surfaces. More...
 
virtual void Compute (const Standard_Boolean Segment=Standard_True)
 Calculates points for correction/splitting of the surface. More...
 
void Perform (const Standard_Boolean Segment=Standard_True)
 Performs correction/splitting of the surface. First defines splitting values by method Compute(), then calls method Build(). More...
 
const Handle< TColStd_HSequenceOfReal > & USplitValues () const
 returns all the U splitting values including the First and Last parameters of the input surface More...
 
const Handle< TColStd_HSequenceOfReal > & VSplitValues () const
 returns all the splitting V values including the First and Last parameters of the input surface More...
 
Standard_Boolean Status (const ShapeExtend_Status status) const
 Returns the status OK - no splitting is needed DONE1 - splitting required and gives more than one patch DONE2 - splitting is required, but gives only single patch (initial) DONE3 - geometric form of the surface or parametrisation is modified. More...
 
const Handle< ShapeExtend_CompositeSurface > & ResSurfaces () const
 Returns obtained surfaces after splitting as CompositeSurface. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Protected Attributes

Handle< TColStd_HSequenceOfReal > myUSplitValues
 
Handle< TColStd_HSequenceOfReal > myVSplitValues
 
Standard_Integer myNbResultingRow
 
Standard_Integer myNbResultingCol
 
Handle< Geom_SurfacemySurface
 
Standard_Integer myStatus
 
Handle< ShapeExtend_CompositeSurfacemyResSurfaces
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 

Detailed Description

Splits a Surface with a criterion.

Constructor & Destructor Documentation

◆ ShapeUpgrade_SplitSurface()

ShapeUpgrade_SplitSurface::ShapeUpgrade_SplitSurface ( )

Empty constructor.

Member Function Documentation

◆ Build()

virtual void ShapeUpgrade_SplitSurface::Build ( const Standard_Boolean  Segment)
virtual

Performs splitting of the supporting surface. If resulting surface is B-Spline and Segment is True, the result is composed with segments of the surface bounded by the U and V SplitValues (method Geom_BSplineSurface::Segment is used). If Segment is False, the result is composed with Geom_RectangularTrimmedSurface all based on the same complete surface. Fields myNbResultingRow and myNbResultingCol must be set to specify the size of resulting grid of surfaces.

Reimplemented in ShapeUpgrade_ConvertSurfaceToBezierBasis.

◆ Compute()

virtual void ShapeUpgrade_SplitSurface::Compute ( const Standard_Boolean  Segment = Standard_True)
virtual

◆ Init() [1/2]

void ShapeUpgrade_SplitSurface::Init ( const Handle< Geom_Surface > &  S)

Initializes with single supporting surface.

◆ Init() [2/2]

void ShapeUpgrade_SplitSurface::Init ( const Handle< Geom_Surface > &  S,
const Standard_Real  UFirst,
const Standard_Real  ULast,
const Standard_Real  VFirst,
const Standard_Real  VLast 
)

Initializes with single supporting surface with bounding parameters.

◆ Perform()

void ShapeUpgrade_SplitSurface::Perform ( const Standard_Boolean  Segment = Standard_True)

Performs correction/splitting of the surface. First defines splitting values by method Compute(), then calls method Build().

◆ ResSurfaces()

const Handle< ShapeExtend_CompositeSurface >& ShapeUpgrade_SplitSurface::ResSurfaces ( ) const

Returns obtained surfaces after splitting as CompositeSurface.

◆ SetUSplitValues()

void ShapeUpgrade_SplitSurface::SetUSplitValues ( const Handle< TColStd_HSequenceOfReal > &  UValues)

Sets U parameters where splitting has to be done.

◆ SetVSplitValues()

void ShapeUpgrade_SplitSurface::SetVSplitValues ( const Handle< TColStd_HSequenceOfReal > &  VValues)

Sets V parameters where splitting has to be done.

◆ Status()

Standard_Boolean ShapeUpgrade_SplitSurface::Status ( const ShapeExtend_Status  status) const

Returns the status OK - no splitting is needed DONE1 - splitting required and gives more than one patch DONE2 - splitting is required, but gives only single patch (initial) DONE3 - geometric form of the surface or parametrisation is modified.

◆ USplitValues()

const Handle< TColStd_HSequenceOfReal >& ShapeUpgrade_SplitSurface::USplitValues ( ) const

returns all the U splitting values including the First and Last parameters of the input surface

◆ VSplitValues()

const Handle< TColStd_HSequenceOfReal >& ShapeUpgrade_SplitSurface::VSplitValues ( ) const

returns all the splitting V values including the First and Last parameters of the input surface

Field Documentation

◆ myNbResultingCol

Standard_Integer ShapeUpgrade_SplitSurface::myNbResultingCol
protected

◆ myNbResultingRow

Standard_Integer ShapeUpgrade_SplitSurface::myNbResultingRow
protected

◆ myResSurfaces

Handle< ShapeExtend_CompositeSurface > ShapeUpgrade_SplitSurface::myResSurfaces
protected

◆ myStatus

Standard_Integer ShapeUpgrade_SplitSurface::myStatus
protected

◆ mySurface

Handle< Geom_Surface > ShapeUpgrade_SplitSurface::mySurface
protected

◆ myUSplitValues

Handle< TColStd_HSequenceOfReal > ShapeUpgrade_SplitSurface::myUSplitValues
protected

◆ myVSplitValues

Handle< TColStd_HSequenceOfReal > ShapeUpgrade_SplitSurface::myVSplitValues
protected

The documentation for this class was generated from the following file: