Open CASCADE Technology  7.5.0
Public Member Functions | Static Public Member Functions

XCAFDoc_AssemblyItemRef Class Reference

An attribute that describes a weak reference to an assembly item or to a subshape or to an assembly label attribute. More...

#include <XCAFDoc_AssemblyItemRef.hxx>

Inheritance diagram for XCAFDoc_AssemblyItemRef:
Inheritance graph
[legend]

Public Member Functions

 XCAFDoc_AssemblyItemRef ()
 Creates an empty reference attribute. More...
 
Standard_Boolean IsOrphan () const
 Checks if the reference points to a really existing item in XDE document. More...
 
const XCAFDoc_AssemblyItemIdGetItem () const
 Returns the assembly item ID that the reference points to. More...
 
void ClearExtraRef ()
 Reverts the reference to empty state. More...
 
virtual void DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const override
 Dumps the content of me into the stream. More...
 
const Standard_GUIDID () const override
 Returns the ID of the attribute. More...
 
Handle< TDF_AttributeNewEmpty () const override
 Returns an new empty attribute from the good end type. It is used by the copy algorithm. More...
 
void Restore (const Handle< TDF_Attribute > &theAttrFrom) override
 Restores the backuped contents from <anAttribute> into this one. It is used when aborting a transaction. More...
 
void Paste (const Handle< TDF_Attribute > &theAttrInto, const Handle< TDF_RelocationTable > &theRT) const override
 This method is different from the "Copy" one, because it is used when copying an attribute from a source structure into a target structure. This method may paste the contents of <me> into <intoAttribute>. More...
 
Standard_OStreamDump (Standard_OStream &theOS) const override
 Dumps the minimum information about <me> on <aStream>. More...
 
Extra reference functions.
Standard_Boolean HasExtraRef () const
 Checks if the reference points on an item's shapeindex or attribute. More...
 
Standard_Boolean IsGUID () const
 Checks is the reference points to an item's attribute. More...
 
Standard_Boolean IsSubshapeIndex () const
 Checks is the reference points to an item's subshape. More...
 
Standard_GUID GetGUID () const
 Returns the assembly item's attribute that the reference points to. If the reference doesn't point to an attribute, returns an empty GUID. More...
 
Standard_Integer GetSubshapeIndex () const
 Returns the assembly item's subshape that the reference points to. If the reference doesn't point to a subshape, returns 0. More...
 
Set reference data functions.
void SetItem (const XCAFDoc_AssemblyItemId &theItemId)
 Sets the assembly item ID that the reference points to. Extra reference data (if any) will be cleared. More...
 
void SetItem (const TColStd_ListOfAsciiString &thePath)
 Sets the assembly item ID from a list of label entries that the reference points to. Extra reference data (if any) will be cleared. More...
 
void SetItem (const TCollection_AsciiString &theString)
 Sets the assembly item ID from a formatted path that the reference points to. Extra reference data (if any) will be cleared. More...
 
void SetGUID (const Standard_GUID &theAttrGUID)
 Sets the assembly item's label attribute that the reference points to. The base assembly item will not change. More...
 
void SetSubshapeIndex (Standard_Integer theShapeIndex)
 Sets the assembly item's subshape that the reference points to. The base assembly item will not change. More...
 
- Public Member Functions inherited from TDF_Attribute
virtual void SetID (const Standard_GUID &)
 Sets specific ID of the attribute (supports several attributes of one type at the same label feature). More...
 
virtual void SetID ()
 Sets default ID defined in nested class (to be used for attributes having User ID feature). More...
 
const TDF_Label Label () const
 Returns the label to which the attribute is attached. If the label is not included in a DF, the label is null. See Label. Warning If the label is not included in a data framework, it is null. This function should not be redefined inline. More...
 
Standard_Integer Transaction () const
 Returns the transaction index in which the attribute has been created or modified. More...
 
Standard_Integer UntilTransaction () const
 Returns the upper transaction index until which the attribute is/was valid. This number may vary. A removed attribute validity range is reduced to its transaction index. More...
 
Standard_Boolean IsValid () const
 Returns true if the attribute is valid; i.e. not a backuped or removed one. More...
 
Standard_Boolean IsNew () const
 Returns true if the attribute has no backup. More...
 
Standard_Boolean IsForgotten () const
 Returns true if the attribute forgotten status is set. More...
 
Standard_Boolean IsAttribute (const Standard_GUID &anID) const
 Returns true if it exists an associated attribute of <me> with <anID> as ID. More...
 
Standard_Boolean FindAttribute (const Standard_GUID &anID, Handle< TDF_Attribute > &anAttribute) const
 Finds an associated attribute of <me>, according to <anID>. the returned <anAttribute> is a valid one. The method returns True if found, False otherwise. A removed attribute cannot be found using this method. More...
 
template<class T >
Standard_Boolean FindAttribute (const Standard_GUID &theID, Handle< T > &theAttr) const
 Safe variant for arbitrary type of argument. More...
 
void AddAttribute (const Handle< TDF_Attribute > &other) const
 Adds an Attribute <other> to the label of <me>.Raises if there is already one of the same GUID fhan <other>. More...
 
Standard_Boolean ForgetAttribute (const Standard_GUID &aguid) const
 Forgets the Attribute of GUID <aguid> associated to the label of <me>. Be carefull that if <me> is the attribute of <guid>, <me> will have a null label after this call. If the attribute doesn't exist returns False. Otherwise returns True. More...
 
void ForgetAllAttributes (const Standard_Boolean clearChildren=Standard_True) const
 Forgets all the attributes attached to the label of <me>. Does it on the sub-labels if <clearChildren> is set to true. Of course, this method is compatible with Transaction & Delta mecanisms. Be carefull that if <me> will have a null label after this call. More...
 
virtual void AfterAddition ()
 Something to do after adding an Attribute to a label. More...
 
virtual void BeforeRemoval ()
 Something to do before removing an Attribute from a label. More...
 
virtual void BeforeForget ()
 Something to do before forgetting an Attribute to a label. More...
 
virtual void AfterResume ()
 Something to do after resuming an Attribute from a label. More...
 
virtual Standard_Boolean AfterRetrieval (const Standard_Boolean forceIt=Standard_False)
 Something to do AFTER creation of an attribute by persistent-transient translation. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true. More...
 
virtual Standard_Boolean BeforeUndo (const Handle< TDF_AttributeDelta > &anAttDelta, const Standard_Boolean forceIt=Standard_False)
 Something to do before applying <anAttDelta>. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true. More...
 
virtual Standard_Boolean AfterUndo (const Handle< TDF_AttributeDelta > &anAttDelta, const Standard_Boolean forceIt=Standard_False)
 Something to do after applying <anAttDelta>. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true. More...
 
virtual void BeforeCommitTransaction ()
 A callback. By default does nothing. It is called by TDF_Data::CommitTransaction() method. More...
 
void Backup ()
 Backups the attribute. The backuped attribute is flagged "Backuped" and not "Valid". More...
 
Standard_Boolean IsBackuped () const
 Returns true if the attribute backup status is set. This status is set/unset by the Backup() method. More...
 
virtual Handle< TDF_AttributeBackupCopy () const
 Copies the attribute contents into a new other attribute. It is used by Backup(). More...
 
virtual Handle< TDF_DeltaOnAdditionDeltaOnAddition () const
 Makes an AttributeDelta because <me> appeared. The only known use of a redefinition of this method is to return a null handle (no delta). More...
 
virtual Handle< TDF_DeltaOnForgetDeltaOnForget () const
 Makes an AttributeDelta because <me> has been forgotten. More...
 
virtual Handle< TDF_DeltaOnResumeDeltaOnResume () const
 Makes an AttributeDelta because <me> has been resumed. More...
 
virtual Handle< TDF_DeltaOnModificationDeltaOnModification (const Handle< TDF_Attribute > &anOldAttribute) const
 Makes a DeltaOnModification between <me> and <anOldAttribute. More...
 
virtual void DeltaOnModification (const Handle< TDF_DeltaOnModification > &aDelta)
 Applies a DeltaOnModification to <me>. More...
 
virtual Handle< TDF_DeltaOnRemovalDeltaOnRemoval () const
 Makes a DeltaOnRemoval on <me> because <me> has disappeared from the DS. More...
 
virtual void References (const Handle< TDF_DataSet > &aDataSet) const
 Adds the first level referenced attributes and labels to <aDataSet>. More...
 
Standard_OStreamoperator<< (Standard_OStream &anOS) const
 
virtual void ExtendedDump (Standard_OStream &anOS, const TDF_IDFilter &aFilter, TDF_AttributeIndexedMap &aMap) const
 Dumps the attribute content on <aStream>, using <aMap> like this: if an attribute is not in the map, first put add it to the map and then dump it. Use the map rank instead of dumping each attribute field. More...
 
void Forget (const Standard_Integer aTransaction)
 Forgets the attribute. <aTransaction> is the current transaction in which the forget is done. A forgotten attribute is also flagged not "Valid". More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Static Public Member Functions

static const Standard_GUIDGetID ()
 
static Handle< XCAFDoc_AssemblyItemRefGet (const TDF_Label &theLabel)
 Finds a reference attribute on the given label and returns it, if it is found. More...
 
Set reference attribute functions.
static Handle< XCAFDoc_AssemblyItemRefSet (const TDF_Label &theLabel, const XCAFDoc_AssemblyItemId &theItemId)
 Create (if not exist) a reference to an assembly item. More...
 
static Handle< XCAFDoc_AssemblyItemRefSet (const TDF_Label &theLabel, const XCAFDoc_AssemblyItemId &theItemId, const Standard_GUID &theGUID)
 Create (if not exist) a reference to an assembly item's label attribute. More...
 
static Handle< XCAFDoc_AssemblyItemRefSet (const TDF_Label &theLabel, const XCAFDoc_AssemblyItemId &theItemId, const Standard_Integer theShapeIndex)
 Create (if not exist) a reference to an assembly item's subshape. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Protected Member Functions inherited from TDF_Attribute
 TDF_Attribute ()
 Initializes fields. More...
 

Detailed Description

An attribute that describes a weak reference to an assembly item or to a subshape or to an assembly label attribute.

Constructor & Destructor Documentation

◆ XCAFDoc_AssemblyItemRef()

XCAFDoc_AssemblyItemRef::XCAFDoc_AssemblyItemRef ( )

Creates an empty reference attribute.

Member Function Documentation

◆ ClearExtraRef()

void XCAFDoc_AssemblyItemRef::ClearExtraRef ( )

Reverts the reference to empty state.

◆ Dump()

Standard_OStream& XCAFDoc_AssemblyItemRef::Dump ( Standard_OStream anOS) const
overridevirtual

Dumps the minimum information about <me> on <aStream>.

Reimplemented from TDF_Attribute.

◆ DumpJson()

virtual void XCAFDoc_AssemblyItemRef::DumpJson ( Standard_OStream theOStream,
Standard_Integer  theDepth = -1 
) const
overridevirtual

Dumps the content of me into the stream.

Reimplemented from TDF_Attribute.

◆ Get()

static Handle< XCAFDoc_AssemblyItemRef > XCAFDoc_AssemblyItemRef::Get ( const TDF_Label theLabel)
static

Finds a reference attribute on the given label and returns it, if it is found.

◆ GetGUID()

Standard_GUID XCAFDoc_AssemblyItemRef::GetGUID ( ) const

Returns the assembly item's attribute that the reference points to. If the reference doesn't point to an attribute, returns an empty GUID.

◆ GetID()

static const Standard_GUID& XCAFDoc_AssemblyItemRef::GetID ( )
static

◆ GetItem()

const XCAFDoc_AssemblyItemId& XCAFDoc_AssemblyItemRef::GetItem ( ) const

Returns the assembly item ID that the reference points to.

◆ GetSubshapeIndex()

Standard_Integer XCAFDoc_AssemblyItemRef::GetSubshapeIndex ( ) const

Returns the assembly item's subshape that the reference points to. If the reference doesn't point to a subshape, returns 0.

◆ HasExtraRef()

Standard_Boolean XCAFDoc_AssemblyItemRef::HasExtraRef ( ) const

Checks if the reference points on an item's shapeindex or attribute.

◆ ID()

const Standard_GUID& XCAFDoc_AssemblyItemRef::ID ( ) const
overridevirtual

Returns the ID of the attribute.

Implements TDF_Attribute.

◆ IsGUID()

Standard_Boolean XCAFDoc_AssemblyItemRef::IsGUID ( ) const

Checks is the reference points to an item's attribute.

◆ IsOrphan()

Standard_Boolean XCAFDoc_AssemblyItemRef::IsOrphan ( ) const

Checks if the reference points to a really existing item in XDE document.

◆ IsSubshapeIndex()

Standard_Boolean XCAFDoc_AssemblyItemRef::IsSubshapeIndex ( ) const

Checks is the reference points to an item's subshape.

◆ NewEmpty()

Handle< TDF_Attribute > XCAFDoc_AssemblyItemRef::NewEmpty ( ) const
overridevirtual

Returns an new empty attribute from the good end type. It is used by the copy algorithm.

Implements TDF_Attribute.

◆ Paste()

void XCAFDoc_AssemblyItemRef::Paste ( const Handle< TDF_Attribute > &  intoAttribute,
const Handle< TDF_RelocationTable > &  aRelocationTable 
) const
overridevirtual

This method is different from the "Copy" one, because it is used when copying an attribute from a source structure into a target structure. This method may paste the contents of <me> into <intoAttribute>.

The given pasted attribute can be full or empty of its contents. But don't make a NEW! Just set the contents!

It is possible to use <aRelocationTable> to get/set the relocation value of a source attribute.

Implements TDF_Attribute.

◆ Restore()

void XCAFDoc_AssemblyItemRef::Restore ( const Handle< TDF_Attribute > &  anAttribute)
overridevirtual

Restores the backuped contents from <anAttribute> into this one. It is used when aborting a transaction.

Implements TDF_Attribute.

◆ Set() [1/3]

static Handle< XCAFDoc_AssemblyItemRef > XCAFDoc_AssemblyItemRef::Set ( const TDF_Label theLabel,
const XCAFDoc_AssemblyItemId theItemId 
)
static

Create (if not exist) a reference to an assembly item.

Parameters
[in]theLabel- label to add the attribute.
[in]theItemId- assembly item ID.
Returns
A handle to the attribute instance.

◆ Set() [2/3]

static Handle< XCAFDoc_AssemblyItemRef > XCAFDoc_AssemblyItemRef::Set ( const TDF_Label theLabel,
const XCAFDoc_AssemblyItemId theItemId,
const Standard_GUID theGUID 
)
static

Create (if not exist) a reference to an assembly item's label attribute.

Parameters
[in]theLabel- label to add the attribute.
[in]theItemId- assembly item ID.
[in]theGUID- assembly item's label attribute ID.
Returns
A handle to the attribute instance.

◆ Set() [3/3]

static Handle< XCAFDoc_AssemblyItemRef > XCAFDoc_AssemblyItemRef::Set ( const TDF_Label theLabel,
const XCAFDoc_AssemblyItemId theItemId,
const Standard_Integer  theShapeIndex 
)
static

Create (if not exist) a reference to an assembly item's subshape.

Parameters
[in]theLabel- label to add the attribute.
[in]theItemId- assembly item ID.
[in]theShapeIndex- assembly item's subshape index.
Returns
A handle to the attribute instance.

◆ SetGUID()

void XCAFDoc_AssemblyItemRef::SetGUID ( const Standard_GUID theAttrGUID)

Sets the assembly item's label attribute that the reference points to. The base assembly item will not change.

◆ SetItem() [1/3]

void XCAFDoc_AssemblyItemRef::SetItem ( const XCAFDoc_AssemblyItemId theItemId)

Sets the assembly item ID that the reference points to. Extra reference data (if any) will be cleared.

◆ SetItem() [2/3]

void XCAFDoc_AssemblyItemRef::SetItem ( const TColStd_ListOfAsciiString thePath)

Sets the assembly item ID from a list of label entries that the reference points to. Extra reference data (if any) will be cleared.

◆ SetItem() [3/3]

void XCAFDoc_AssemblyItemRef::SetItem ( const TCollection_AsciiString theString)

Sets the assembly item ID from a formatted path that the reference points to. Extra reference data (if any) will be cleared.

◆ SetSubshapeIndex()

void XCAFDoc_AssemblyItemRef::SetSubshapeIndex ( Standard_Integer  theShapeIndex)

Sets the assembly item's subshape that the reference points to. The base assembly item will not change.


The documentation for this class was generated from the following file: