Open CASCADE Technology  7.5.0
Public Member Functions | Static Public Member Functions

XCAFDoc_DimTolTool Class Reference

Attribute containing GD&T section of XCAF document. Provide tools for GD&T section management. More...

#include <XCAFDoc_DimTolTool.hxx>

Inheritance diagram for XCAFDoc_DimTolTool:
Inheritance graph
[legend]

Public Member Functions

 XCAFDoc_DimTolTool ()
 
TDF_Label BaseLabel () const
 Returns the label under which GD&T table is stored. More...
 
const Handle< XCAFDoc_ShapeTool > & ShapeTool ()
 Returns internal XCAFDoc_ShapeTool tool. More...
 
Standard_Boolean IsDimension (const TDF_Label &theLab) const
 Returns True if the label belongs to a GD&T table and is a Dimension definition. More...
 
void GetDimensionLabels (TDF_LabelSequence &theLabels) const
 Returns a sequence of Dimension labels currently stored in the GD&T table. More...
 
void SetDimension (const TDF_LabelSequence &theFirstLS, const TDF_LabelSequence &theSecondLS, const TDF_Label &theDimL) const
 Sets a dimension to sequences target labels. More...
 
void SetDimension (const TDF_Label &theFirstL, const TDF_Label &theSecondL, const TDF_Label &theDimL) const
 Sets a dimension to target labels. More...
 
void SetDimension (const TDF_Label &theL, const TDF_Label &theDimL) const
 Sets a dimension to the target label. More...
 
Standard_Boolean GetRefDimensionLabels (const TDF_Label &theShapeL, TDF_LabelSequence &theDimensions) const
 Returns all Dimension labels defined for theShapeL. More...
 
TDF_Label AddDimension ()
 Adds a dimension definition to the GD&T table and returns its label. More...
 
Standard_Boolean IsGeomTolerance (const TDF_Label &theLab) const
 Returns True if the label belongs to the GD&T table and is a dimension tolerance. More...
 
void GetGeomToleranceLabels (TDF_LabelSequence &theLabels) const
 Returns a sequence of Tolerance labels currently stored in the GD&T table. More...
 
void SetGeomTolerance (const TDF_Label &theL, const TDF_Label &theGeomTolL) const
 Sets a geometry tolerance from theGeomTolL to theL label. Checks if theGeomTolL is a geometry tolerance definition first. More...
 
void SetGeomTolerance (const TDF_LabelSequence &theL, const TDF_Label &theGeomTolL) const
 Sets a geometry tolerance from theGeomTolL to sequence of labels theL. Checks if theGeomTolL is a geometry tolerance definition first. More...
 
Standard_Boolean GetRefGeomToleranceLabels (const TDF_Label &theShapeL, TDF_LabelSequence &theDimTols) const
 Returns all GeomTolerance labels defined for theShapeL. More...
 
TDF_Label AddGeomTolerance ()
 Adds a GeomTolerance definition to the GD&T table and returns its label. More...
 
Standard_Boolean IsDimTol (const TDF_Label &theLab) const
 Returns True if theLab belongs to the GD&T table and is a dmension tolerance. More...
 
void GetDimTolLabels (TDF_LabelSequence &Labels) const
 Returns a sequence of D&GTs currently stored in the GD&T table. More...
 
Standard_Boolean FindDimTol (const Standard_Integer theKind, const Handle< TColStd_HArray1OfReal > &theVal, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, TDF_Label &lab) const
 Finds a dimension tolerance definition in the GD&T table sutisfying the specified kind, values, name and description and returns its label if found. Returns False if dimension tolerance is not found in DGTtable. More...
 
TDF_Label FindDimTol (const Standard_Integer theKind, const Handle< TColStd_HArray1OfReal > &theVal, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription) const
 Finds a dimension tolerance in the GD&T table sutisfying the specified kind, values, name and description and returns its label if found (or Null label else). More...
 
TDF_Label AddDimTol (const Standard_Integer theKind, const Handle< TColStd_HArray1OfReal > &theVal, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription) const
 Adds a a dimension tolerance definition with the specified kind, value, name and description to the GD&T table and returns its label. More...
 
void SetDimTol (const TDF_Label &theL, const TDF_Label &theDimTolL) const
 Sets existing dimension tolerance to theL label. More...
 
TDF_Label SetDimTol (const TDF_Label &theL, const Standard_Integer theKind, const Handle< TColStd_HArray1OfReal > &theVal, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription) const
 Creates a dimension tolerance and sets it to theL label. More...
 
Standard_Boolean GetRefShapeLabel (const TDF_Label &theL, TDF_LabelSequence &theShapeLFirst, TDF_LabelSequence &theShapeLSecond) const
 Gets all shape labels reffered by theL label of the GD&T table. Returns False if there are no shape labels added to the sequences. More...
 
Standard_Boolean GetDimTol (const TDF_Label &theDimTolL, Standard_Integer &theKind, Handle< TColStd_HArray1OfReal > &theVal, Handle< TCollection_HAsciiString > &theName, Handle< TCollection_HAsciiString > &theDescription) const
 Returns dimension tolerance assigned to theDimTolL label. Returns False if no such dimension tolerance is assigned. More...
 
Standard_Boolean IsDatum (const TDF_Label &lab) const
 Returns True if label belongs to the GD&T table and is a Datum definition. More...
 
void GetDatumLabels (TDF_LabelSequence &Labels) const
 Returns a sequence of Datums currently stored in the GD&T table. More...
 
Standard_Boolean FindDatum (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< TCollection_HAsciiString > &theIdentification, TDF_Label &lab) const
 Finds a datum sutisfying the specified name, description and identification and returns its label if found. More...
 
TDF_Label AddDatum (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< TCollection_HAsciiString > &theIdentification) const
 Adds a datum definition to the GD&T table and returns its label. More...
 
TDF_Label AddDatum ()
 Adds a datum definition to the GD&T table and returns its label. More...
 
void SetDatum (const TDF_LabelSequence &theShapeLabels, const TDF_Label &theDatumL) const
 Sets a datum to the sequence of shape labels. More...
 
void SetDatum (const TDF_Label &theL, const TDF_Label &theTolerL, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< TCollection_HAsciiString > &theIdentification) const
 Sets a datum to theL label and binds it with theTolerL label. A datum with the specified name, description and identification is created if it isn't found in the GD&T table. More...
 
void SetDatumToGeomTol (const TDF_Label &theDatumL, const TDF_Label &theTolerL) const
 Sets a datum from theDatumL label to theToletL label. More...
 
Standard_Boolean GetDatum (const TDF_Label &theDatumL, Handle< TCollection_HAsciiString > &theName, Handle< TCollection_HAsciiString > &theDescription, Handle< TCollection_HAsciiString > &theIdentification) const
 Returns datum assigned to theDatumL label. Returns False if no such datum is assigned. More...
 
Standard_Boolean GetDatumOfTolerLabels (const TDF_Label &theDimTolL, TDF_LabelSequence &theDatums) const
 Returns all Datum labels defined for theDimTolL label. More...
 
Standard_Boolean GetDatumWithObjectOfTolerLabels (const TDF_Label &theDimTolL, TDF_LabelSequence &theDatums) const
 Returns all Datum labels with XCAFDimTolObjects_DatumObject defined for label theDimTolL. More...
 
Standard_Boolean GetTolerOfDatumLabels (const TDF_Label &theDatumL, TDF_LabelSequence &theTols) const
 Returns all GeomToleranses labels defined for theDatumL label. More...
 
Standard_Boolean GetRefDatumLabel (const TDF_Label &theShapeL, TDF_LabelSequence &theDatum) const
 Returns Datum label defined for theShapeL label. More...
 
Standard_Boolean IsLocked (const TDF_Label &theViewL) const
 Returns true if the given GDT is marked as locked. More...
 
void Lock (const TDF_Label &theViewL) const
 Mark the given GDT as locked. More...
 
void GetGDTPresentations (NCollection_IndexedDataMap< TDF_Label, TopoDS_Shape, TDF_LabelMapHasher > &theGDTLabelToShape) const
 fill the map GDT label -> shape presentation More...
 
void SetGDTPresentations (NCollection_IndexedDataMap< TDF_Label, TopoDS_Shape, TDF_LabelMapHasher > &theGDTLabelToPrs)
 Set shape presentation for GDT labels according to given map (theGDTLabelToPrs) theGDTLabelToPrsName map is an additional argument, can be used to set presentation names. If label is not in the theGDTLabelToPrsName map, the presentation name will be empty. More...
 
void Unlock (const TDF_Label &theViewL) const
 Unlock the given GDT. More...
 
const Standard_GUIDID () const override
 Returns the ID of the attribute. More...
 
virtual void DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const override
 Dumps the content of me into the stream. More...
 
- Public Member Functions inherited from TDataStd_GenericEmpty
void Restore (const Handle< TDF_Attribute > &) override
 Restores the backuped contents from <anAttribute> into this one. It is used when aborting a transaction. More...
 
void Paste (const Handle< TDF_Attribute > &, const Handle< TDF_RelocationTable > &) const override
 This method is different from the "Copy" one, because it is used when copying an attribute from a source structure into a target structure. This method may paste the contents of <me> into <intoAttribute>. More...
 
- Public Member Functions inherited from TDF_Attribute
virtual void SetID (const Standard_GUID &)
 Sets specific ID of the attribute (supports several attributes of one type at the same label feature). More...
 
virtual void SetID ()
 Sets default ID defined in nested class (to be used for attributes having User ID feature). More...
 
const TDF_Label Label () const
 Returns the label to which the attribute is attached. If the label is not included in a DF, the label is null. See Label. Warning If the label is not included in a data framework, it is null. This function should not be redefined inline. More...
 
Standard_Integer Transaction () const
 Returns the transaction index in which the attribute has been created or modified. More...
 
Standard_Integer UntilTransaction () const
 Returns the upper transaction index until which the attribute is/was valid. This number may vary. A removed attribute validity range is reduced to its transaction index. More...
 
Standard_Boolean IsValid () const
 Returns true if the attribute is valid; i.e. not a backuped or removed one. More...
 
Standard_Boolean IsNew () const
 Returns true if the attribute has no backup. More...
 
Standard_Boolean IsForgotten () const
 Returns true if the attribute forgotten status is set. More...
 
Standard_Boolean IsAttribute (const Standard_GUID &anID) const
 Returns true if it exists an associated attribute of <me> with <anID> as ID. More...
 
Standard_Boolean FindAttribute (const Standard_GUID &anID, Handle< TDF_Attribute > &anAttribute) const
 Finds an associated attribute of <me>, according to <anID>. the returned <anAttribute> is a valid one. The method returns True if found, False otherwise. A removed attribute cannot be found using this method. More...
 
template<class T >
Standard_Boolean FindAttribute (const Standard_GUID &theID, Handle< T > &theAttr) const
 Safe variant for arbitrary type of argument. More...
 
void AddAttribute (const Handle< TDF_Attribute > &other) const
 Adds an Attribute <other> to the label of <me>.Raises if there is already one of the same GUID fhan <other>. More...
 
Standard_Boolean ForgetAttribute (const Standard_GUID &aguid) const
 Forgets the Attribute of GUID <aguid> associated to the label of <me>. Be carefull that if <me> is the attribute of <guid>, <me> will have a null label after this call. If the attribute doesn't exist returns False. Otherwise returns True. More...
 
void ForgetAllAttributes (const Standard_Boolean clearChildren=Standard_True) const
 Forgets all the attributes attached to the label of <me>. Does it on the sub-labels if <clearChildren> is set to true. Of course, this method is compatible with Transaction & Delta mecanisms. Be carefull that if <me> will have a null label after this call. More...
 
virtual void AfterAddition ()
 Something to do after adding an Attribute to a label. More...
 
virtual void BeforeRemoval ()
 Something to do before removing an Attribute from a label. More...
 
virtual void BeforeForget ()
 Something to do before forgetting an Attribute to a label. More...
 
virtual void AfterResume ()
 Something to do after resuming an Attribute from a label. More...
 
virtual Standard_Boolean AfterRetrieval (const Standard_Boolean forceIt=Standard_False)
 Something to do AFTER creation of an attribute by persistent-transient translation. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true. More...
 
virtual Standard_Boolean BeforeUndo (const Handle< TDF_AttributeDelta > &anAttDelta, const Standard_Boolean forceIt=Standard_False)
 Something to do before applying <anAttDelta>. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true. More...
 
virtual Standard_Boolean AfterUndo (const Handle< TDF_AttributeDelta > &anAttDelta, const Standard_Boolean forceIt=Standard_False)
 Something to do after applying <anAttDelta>. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true. More...
 
virtual void BeforeCommitTransaction ()
 A callback. By default does nothing. It is called by TDF_Data::CommitTransaction() method. More...
 
void Backup ()
 Backups the attribute. The backuped attribute is flagged "Backuped" and not "Valid". More...
 
Standard_Boolean IsBackuped () const
 Returns true if the attribute backup status is set. This status is set/unset by the Backup() method. More...
 
virtual Handle< TDF_AttributeBackupCopy () const
 Copies the attribute contents into a new other attribute. It is used by Backup(). More...
 
virtual Handle< TDF_DeltaOnAdditionDeltaOnAddition () const
 Makes an AttributeDelta because <me> appeared. The only known use of a redefinition of this method is to return a null handle (no delta). More...
 
virtual Handle< TDF_DeltaOnForgetDeltaOnForget () const
 Makes an AttributeDelta because <me> has been forgotten. More...
 
virtual Handle< TDF_DeltaOnResumeDeltaOnResume () const
 Makes an AttributeDelta because <me> has been resumed. More...
 
virtual Handle< TDF_DeltaOnModificationDeltaOnModification (const Handle< TDF_Attribute > &anOldAttribute) const
 Makes a DeltaOnModification between <me> and <anOldAttribute. More...
 
virtual void DeltaOnModification (const Handle< TDF_DeltaOnModification > &aDelta)
 Applies a DeltaOnModification to <me>. More...
 
virtual Handle< TDF_DeltaOnRemovalDeltaOnRemoval () const
 Makes a DeltaOnRemoval on <me> because <me> has disappeared from the DS. More...
 
virtual Handle< TDF_AttributeNewEmpty () const =0
 Returns an new empty attribute from the good end type. It is used by the copy algorithm. More...
 
virtual void References (const Handle< TDF_DataSet > &aDataSet) const
 Adds the first level referenced attributes and labels to <aDataSet>. More...
 
virtual Standard_OStreamDump (Standard_OStream &anOS) const
 Dumps the minimum information about <me> on <aStream>. More...
 
Standard_OStreamoperator<< (Standard_OStream &anOS) const
 
virtual void ExtendedDump (Standard_OStream &anOS, const TDF_IDFilter &aFilter, TDF_AttributeIndexedMap &aMap) const
 Dumps the attribute content on <aStream>, using <aMap> like this: if an attribute is not in the map, first put add it to the map and then dump it. Use the map rank instead of dumping each attribute field. More...
 
void Forget (const Standard_Integer aTransaction)
 Forgets the attribute. <aTransaction> is the current transaction in which the forget is done. A forgotten attribute is also flagged not "Valid". More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Static Public Member Functions

static Handle< XCAFDoc_DimTolToolSet (const TDF_Label &L)
 Creates (if not exist) DimTolTool attribute. More...
 
static const Standard_GUIDGetID ()
 Returns the standard GD&T tool GUID. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Protected Member Functions inherited from TDF_Attribute
 TDF_Attribute ()
 Initializes fields. More...
 

Detailed Description

Attribute containing GD&T section of XCAF document. Provide tools for GD&T section management.

Constructor & Destructor Documentation

◆ XCAFDoc_DimTolTool()

XCAFDoc_DimTolTool::XCAFDoc_DimTolTool ( )

Member Function Documentation

◆ AddDatum() [1/2]

TDF_Label XCAFDoc_DimTolTool::AddDatum ( const Handle< TCollection_HAsciiString > &  theName,
const Handle< TCollection_HAsciiString > &  theDescription,
const Handle< TCollection_HAsciiString > &  theIdentification 
) const

Adds a datum definition to the GD&T table and returns its label.

◆ AddDatum() [2/2]

TDF_Label XCAFDoc_DimTolTool::AddDatum ( )

Adds a datum definition to the GD&T table and returns its label.

◆ AddDimension()

TDF_Label XCAFDoc_DimTolTool::AddDimension ( )

Adds a dimension definition to the GD&T table and returns its label.

◆ AddDimTol()

TDF_Label XCAFDoc_DimTolTool::AddDimTol ( const Standard_Integer  theKind,
const Handle< TColStd_HArray1OfReal > &  theVal,
const Handle< TCollection_HAsciiString > &  theName,
const Handle< TCollection_HAsciiString > &  theDescription 
) const

Adds a a dimension tolerance definition with the specified kind, value, name and description to the GD&T table and returns its label.

◆ AddGeomTolerance()

TDF_Label XCAFDoc_DimTolTool::AddGeomTolerance ( )

Adds a GeomTolerance definition to the GD&T table and returns its label.

◆ BaseLabel()

TDF_Label XCAFDoc_DimTolTool::BaseLabel ( ) const

Returns the label under which GD&T table is stored.

◆ DumpJson()

virtual void XCAFDoc_DimTolTool::DumpJson ( Standard_OStream theOStream,
Standard_Integer  theDepth = -1 
) const
overridevirtual

Dumps the content of me into the stream.

Reimplemented from TDataStd_GenericEmpty.

◆ FindDatum()

Standard_Boolean XCAFDoc_DimTolTool::FindDatum ( const Handle< TCollection_HAsciiString > &  theName,
const Handle< TCollection_HAsciiString > &  theDescription,
const Handle< TCollection_HAsciiString > &  theIdentification,
TDF_Label lab 
) const

Finds a datum sutisfying the specified name, description and identification and returns its label if found.

◆ FindDimTol() [1/2]

Standard_Boolean XCAFDoc_DimTolTool::FindDimTol ( const Standard_Integer  theKind,
const Handle< TColStd_HArray1OfReal > &  theVal,
const Handle< TCollection_HAsciiString > &  theName,
const Handle< TCollection_HAsciiString > &  theDescription,
TDF_Label lab 
) const

Finds a dimension tolerance definition in the GD&T table sutisfying the specified kind, values, name and description and returns its label if found. Returns False if dimension tolerance is not found in DGTtable.

◆ FindDimTol() [2/2]

TDF_Label XCAFDoc_DimTolTool::FindDimTol ( const Standard_Integer  theKind,
const Handle< TColStd_HArray1OfReal > &  theVal,
const Handle< TCollection_HAsciiString > &  theName,
const Handle< TCollection_HAsciiString > &  theDescription 
) const

Finds a dimension tolerance in the GD&T table sutisfying the specified kind, values, name and description and returns its label if found (or Null label else).

◆ GetDatum()

Standard_Boolean XCAFDoc_DimTolTool::GetDatum ( const TDF_Label theDatumL,
Handle< TCollection_HAsciiString > &  theName,
Handle< TCollection_HAsciiString > &  theDescription,
Handle< TCollection_HAsciiString > &  theIdentification 
) const

Returns datum assigned to theDatumL label. Returns False if no such datum is assigned.

◆ GetDatumLabels()

void XCAFDoc_DimTolTool::GetDatumLabels ( TDF_LabelSequence Labels) const

Returns a sequence of Datums currently stored in the GD&T table.

◆ GetDatumOfTolerLabels()

Standard_Boolean XCAFDoc_DimTolTool::GetDatumOfTolerLabels ( const TDF_Label theDimTolL,
TDF_LabelSequence theDatums 
) const

Returns all Datum labels defined for theDimTolL label.

◆ GetDatumWithObjectOfTolerLabels()

Standard_Boolean XCAFDoc_DimTolTool::GetDatumWithObjectOfTolerLabels ( const TDF_Label theDimTolL,
TDF_LabelSequence theDatums 
) const

Returns all Datum labels with XCAFDimTolObjects_DatumObject defined for label theDimTolL.

◆ GetDimensionLabels()

void XCAFDoc_DimTolTool::GetDimensionLabels ( TDF_LabelSequence theLabels) const

Returns a sequence of Dimension labels currently stored in the GD&T table.

◆ GetDimTol()

Standard_Boolean XCAFDoc_DimTolTool::GetDimTol ( const TDF_Label theDimTolL,
Standard_Integer theKind,
Handle< TColStd_HArray1OfReal > &  theVal,
Handle< TCollection_HAsciiString > &  theName,
Handle< TCollection_HAsciiString > &  theDescription 
) const

Returns dimension tolerance assigned to theDimTolL label. Returns False if no such dimension tolerance is assigned.

◆ GetDimTolLabels()

void XCAFDoc_DimTolTool::GetDimTolLabels ( TDF_LabelSequence Labels) const

Returns a sequence of D&GTs currently stored in the GD&T table.

◆ GetGDTPresentations()

void XCAFDoc_DimTolTool::GetGDTPresentations ( NCollection_IndexedDataMap< TDF_Label, TopoDS_Shape, TDF_LabelMapHasher > &  theGDTLabelToShape) const

fill the map GDT label -> shape presentation

◆ GetGeomToleranceLabels()

void XCAFDoc_DimTolTool::GetGeomToleranceLabels ( TDF_LabelSequence theLabels) const

Returns a sequence of Tolerance labels currently stored in the GD&T table.

◆ GetID()

static const Standard_GUID& XCAFDoc_DimTolTool::GetID ( )
static

Returns the standard GD&T tool GUID.

◆ GetRefDatumLabel()

Standard_Boolean XCAFDoc_DimTolTool::GetRefDatumLabel ( const TDF_Label theShapeL,
TDF_LabelSequence theDatum 
) const

Returns Datum label defined for theShapeL label.

◆ GetRefDimensionLabels()

Standard_Boolean XCAFDoc_DimTolTool::GetRefDimensionLabels ( const TDF_Label theShapeL,
TDF_LabelSequence theDimensions 
) const

Returns all Dimension labels defined for theShapeL.

◆ GetRefGeomToleranceLabels()

Standard_Boolean XCAFDoc_DimTolTool::GetRefGeomToleranceLabels ( const TDF_Label theShapeL,
TDF_LabelSequence theDimTols 
) const

Returns all GeomTolerance labels defined for theShapeL.

◆ GetRefShapeLabel()

Standard_Boolean XCAFDoc_DimTolTool::GetRefShapeLabel ( const TDF_Label theL,
TDF_LabelSequence theShapeLFirst,
TDF_LabelSequence theShapeLSecond 
) const

Gets all shape labels reffered by theL label of the GD&T table. Returns False if there are no shape labels added to the sequences.

◆ GetTolerOfDatumLabels()

Standard_Boolean XCAFDoc_DimTolTool::GetTolerOfDatumLabels ( const TDF_Label theDatumL,
TDF_LabelSequence theTols 
) const

Returns all GeomToleranses labels defined for theDatumL label.

◆ ID()

const Standard_GUID& XCAFDoc_DimTolTool::ID ( ) const
overridevirtual

Returns the ID of the attribute.

Implements TDF_Attribute.

◆ IsDatum()

Standard_Boolean XCAFDoc_DimTolTool::IsDatum ( const TDF_Label lab) const

Returns True if label belongs to the GD&T table and is a Datum definition.

◆ IsDimension()

Standard_Boolean XCAFDoc_DimTolTool::IsDimension ( const TDF_Label theLab) const

Returns True if the label belongs to a GD&T table and is a Dimension definition.

◆ IsDimTol()

Standard_Boolean XCAFDoc_DimTolTool::IsDimTol ( const TDF_Label theLab) const

Returns True if theLab belongs to the GD&T table and is a dmension tolerance.

◆ IsGeomTolerance()

Standard_Boolean XCAFDoc_DimTolTool::IsGeomTolerance ( const TDF_Label theLab) const

Returns True if the label belongs to the GD&T table and is a dimension tolerance.

◆ IsLocked()

Standard_Boolean XCAFDoc_DimTolTool::IsLocked ( const TDF_Label theViewL) const

Returns true if the given GDT is marked as locked.

◆ Lock()

void XCAFDoc_DimTolTool::Lock ( const TDF_Label theViewL) const

Mark the given GDT as locked.

◆ Set()

static Handle< XCAFDoc_DimTolTool > XCAFDoc_DimTolTool::Set ( const TDF_Label L)
static

Creates (if not exist) DimTolTool attribute.

◆ SetDatum() [1/2]

void XCAFDoc_DimTolTool::SetDatum ( const TDF_LabelSequence theShapeLabels,
const TDF_Label theDatumL 
) const

Sets a datum to the sequence of shape labels.

◆ SetDatum() [2/2]

void XCAFDoc_DimTolTool::SetDatum ( const TDF_Label theL,
const TDF_Label theTolerL,
const Handle< TCollection_HAsciiString > &  theName,
const Handle< TCollection_HAsciiString > &  theDescription,
const Handle< TCollection_HAsciiString > &  theIdentification 
) const

Sets a datum to theL label and binds it with theTolerL label. A datum with the specified name, description and identification is created if it isn't found in the GD&T table.

◆ SetDatumToGeomTol()

void XCAFDoc_DimTolTool::SetDatumToGeomTol ( const TDF_Label theDatumL,
const TDF_Label theTolerL 
) const

Sets a datum from theDatumL label to theToletL label.

◆ SetDimension() [1/3]

void XCAFDoc_DimTolTool::SetDimension ( const TDF_LabelSequence theFirstLS,
const TDF_LabelSequence theSecondLS,
const TDF_Label theDimL 
) const

Sets a dimension to sequences target labels.

◆ SetDimension() [2/3]

void XCAFDoc_DimTolTool::SetDimension ( const TDF_Label theFirstL,
const TDF_Label theSecondL,
const TDF_Label theDimL 
) const

Sets a dimension to target labels.

◆ SetDimension() [3/3]

void XCAFDoc_DimTolTool::SetDimension ( const TDF_Label theL,
const TDF_Label theDimL 
) const

Sets a dimension to the target label.

◆ SetDimTol() [1/2]

void XCAFDoc_DimTolTool::SetDimTol ( const TDF_Label theL,
const TDF_Label theDimTolL 
) const

Sets existing dimension tolerance to theL label.

◆ SetDimTol() [2/2]

TDF_Label XCAFDoc_DimTolTool::SetDimTol ( const TDF_Label theL,
const Standard_Integer  theKind,
const Handle< TColStd_HArray1OfReal > &  theVal,
const Handle< TCollection_HAsciiString > &  theName,
const Handle< TCollection_HAsciiString > &  theDescription 
) const

Creates a dimension tolerance and sets it to theL label.

◆ SetGDTPresentations()

void XCAFDoc_DimTolTool::SetGDTPresentations ( NCollection_IndexedDataMap< TDF_Label, TopoDS_Shape, TDF_LabelMapHasher > &  theGDTLabelToPrs)

Set shape presentation for GDT labels according to given map (theGDTLabelToPrs) theGDTLabelToPrsName map is an additional argument, can be used to set presentation names. If label is not in the theGDTLabelToPrsName map, the presentation name will be empty.

◆ SetGeomTolerance() [1/2]

void XCAFDoc_DimTolTool::SetGeomTolerance ( const TDF_Label theL,
const TDF_Label theGeomTolL 
) const

Sets a geometry tolerance from theGeomTolL to theL label. Checks if theGeomTolL is a geometry tolerance definition first.

◆ SetGeomTolerance() [2/2]

void XCAFDoc_DimTolTool::SetGeomTolerance ( const TDF_LabelSequence theL,
const TDF_Label theGeomTolL 
) const

Sets a geometry tolerance from theGeomTolL to sequence of labels theL. Checks if theGeomTolL is a geometry tolerance definition first.

◆ ShapeTool()

const Handle< XCAFDoc_ShapeTool >& XCAFDoc_DimTolTool::ShapeTool ( )

Returns internal XCAFDoc_ShapeTool tool.

◆ Unlock()

void XCAFDoc_DimTolTool::Unlock ( const TDF_Label theViewL) const

Unlock the given GDT.


The documentation for this class was generated from the following file: