Open CASCADE Technology  7.6.0
Public Member Functions

Geom_Plane Class Reference

Describes a plane in 3D space. A plane is positioned in space by a coordinate system (a gp_Ax3 object) such that the plane is defined by the origin, "X Direction" and "Y Direction" of this coordinate system. This coordinate system is the "local coordinate system" of the plane. The following apply: More...

#include <Geom_Plane.hxx>

Inheritance diagram for Geom_Plane:
Inheritance graph
[legend]

Public Member Functions

 Geom_Plane (const gp_Ax3 &A3)
 Creates a plane located in 3D space with an axis placement three axis. The "ZDirection" of "A3" is the direction normal to the plane. The "Location" point of "A3" is the origin of the plane. The "XDirection" and "YDirection" of "A3" define the directions of the U isoparametric and V isoparametric curves. More...
 
 Geom_Plane (const gp_Pln &Pl)
 Creates a plane from a non transient plane from package gp. More...
 
 Geom_Plane (const gp_Pnt &P, const gp_Dir &V)
 P is the "Location" point or origin of the plane. V is the direction normal to the plane. More...
 
 Geom_Plane (const Standard_Real A, const Standard_Real B, const Standard_Real C, const Standard_Real D)
 Creates a plane from its cartesian equation: More...
 
void SetPln (const gp_Pln &Pl)
 Set <me> so that <me> has the same geometric properties as Pl. More...
 
gp_Pln Pln () const
 Converts this plane into a gp_Pln plane. More...
 
virtual void UReverse () override
 Changes the orientation of this plane in the u (or v) parametric direction. The bounds of the plane are not changed but the given parametric direction is reversed. Hence the orientation of the surface is reversed. More...
 
Standard_Real UReversedParameter (const Standard_Real U) const override
 Computes the u parameter on the modified plane, produced when reversing the u parametric of this plane, for any point of u parameter U on this plane. In the case of a plane, these methods return - -U. More...
 
virtual void VReverse () override
 Changes the orientation of this plane in the u (or v) parametric direction. The bounds of the plane are not changed but the given parametric direction is reversed. Hence the orientation of the surface is reversed. More...
 
Standard_Real VReversedParameter (const Standard_Real V) const override
 Computes the v parameter on the modified plane, produced when reversing the v parametric of this plane, for any point of v parameter V on this plane. In the case of a plane, these methods return -V. More...
 
virtual void TransformParameters (Standard_Real &U, Standard_Real &V, const gp_Trsf &T) const override
 Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>. More...
 
virtual gp_GTrsf2d ParametricTransformation (const gp_Trsf &T) const override
 Returns a 2d transformation used to find the new parameters of a point on the transformed surface. More...
 
void Bounds (Standard_Real &U1, Standard_Real &U2, Standard_Real &V1, Standard_Real &V2) const override
 Returns the parametric bounds U1, U2, V1 and V2 of this plane. Because a plane is an infinite surface, the following is always true: More...
 
void Coefficients (Standard_Real &A, Standard_Real &B, Standard_Real &C, Standard_Real &D) const
 Computes the normalized coefficients of the plane's cartesian equation: More...
 
Standard_Boolean IsUClosed () const override
 return False More...
 
Standard_Boolean IsVClosed () const override
 return False More...
 
Standard_Boolean IsUPeriodic () const override
 return False. More...
 
Standard_Boolean IsVPeriodic () const override
 return False. More...
 
Handle< Geom_CurveUIso (const Standard_Real U) const override
 Computes the U isoparametric curve. This is a Line parallel to the YAxis of the plane. More...
 
Handle< Geom_CurveVIso (const Standard_Real V) const override
 Computes the V isoparametric curve. This is a Line parallel to the XAxis of the plane. More...
 
void D0 (const Standard_Real U, const Standard_Real V, gp_Pnt &P) const override
 Computes the point P (U, V) on <me>. More...
 
void D1 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V) const override
 Computes the current point and the first derivatives in the directions U and V. More...
 
void D2 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV) const override
 Computes the current point, the first and the second derivatives in the directions U and V. More...
 
void D3 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV, gp_Vec &D3U, gp_Vec &D3V, gp_Vec &D3UUV, gp_Vec &D3UVV) const override
 Computes the current point, the first,the second and the third derivatives in the directions U and V. More...
 
gp_Vec DN (const Standard_Real U, const Standard_Real V, const Standard_Integer Nu, const Standard_Integer Nv) const override
 Computes the derivative of order Nu in the direction u and Nv in the direction v. Raised if Nu + Nv < 1 or Nu < 0 or Nv < 0. More...
 
void Transform (const gp_Trsf &T) override
 Applies the transformation T to this plane. More...
 
Handle< Geom_GeometryCopy () const override
 Creates a new object which is a copy of this plane. More...
 
virtual void DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const override
 Dumps the content of me into the stream. More...
 
- Public Member Functions inherited from Geom_ElementarySurface
void SetAxis (const gp_Ax1 &theA1)
 Changes the main axis (ZAxis) of the elementary surface. More...
 
void SetLocation (const gp_Pnt &theLoc)
 Changes the location of the local coordinates system of the surface. More...
 
void SetPosition (const gp_Ax3 &theAx3)
 Changes the local coordinates system of the surface. More...
 
const gp_Ax1Axis () const
 Returns the main axis of the surface (ZAxis). More...
 
const gp_PntLocation () const
 Returns the location point of the local coordinate system of the surface. More...
 
const gp_Ax3Position () const
 Returns the local coordinates system of the surface. More...
 
GeomAbs_Shape Continuity () const override
 Returns GeomAbs_CN, the global continuity of any elementary surface. More...
 
Standard_Boolean IsCNu (const Standard_Integer N) const override
 Returns True. More...
 
Standard_Boolean IsCNv (const Standard_Integer N) const override
 Returns True. More...
 
- Public Member Functions inherited from Geom_Surface
Handle< Geom_SurfaceUReversed () const
 Reverses the U direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
 
Handle< Geom_SurfaceVReversed () const
 Reverses the V direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
 
virtual Standard_Real UPeriod () const
 Returns the period of this surface in the u parametric direction. raises if the surface is not uperiodic. More...
 
virtual Standard_Real VPeriod () const
 Returns the period of this surface in the v parametric direction. raises if the surface is not vperiodic. More...
 
gp_Pnt Value (const Standard_Real U, const Standard_Real V) const
 Computes the point of parameter U on the surface. More...
 
- Public Member Functions inherited from Geom_Geometry
void Mirror (const gp_Pnt &P)
 Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More...
 
void Mirror (const gp_Ax1 &A1)
 Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...
 
void Mirror (const gp_Ax2 &A2)
 Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More...
 
void Rotate (const gp_Ax1 &A1, const Standard_Real Ang)
 Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More...
 
void Scale (const gp_Pnt &P, const Standard_Real S)
 Scales a Geometry. S is the scaling value. More...
 
void Translate (const gp_Vec &V)
 Translates a Geometry. V is the vector of the translation. More...
 
void Translate (const gp_Pnt &P1, const gp_Pnt &P2)
 Translates a Geometry from the point P1 to the point P2. More...
 
Handle< Geom_GeometryMirrored (const gp_Pnt &P) const
 
Handle< Geom_GeometryMirrored (const gp_Ax1 &A1) const
 
Handle< Geom_GeometryMirrored (const gp_Ax2 &A2) const
 
Handle< Geom_GeometryRotated (const gp_Ax1 &A1, const Standard_Real Ang) const
 
Handle< Geom_GeometryScaled (const gp_Pnt &P, const Standard_Real S) const
 
Handle< Geom_GeometryTransformed (const gp_Trsf &T) const
 
Handle< Geom_GeometryTranslated (const gp_Vec &V) const
 
Handle< Geom_GeometryTranslated (const gp_Pnt &P1, const gp_Pnt &P2) const
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 
- Protected Attributes inherited from Geom_ElementarySurface
gp_Ax3 pos
 

Detailed Description

Describes a plane in 3D space. A plane is positioned in space by a coordinate system (a gp_Ax3 object) such that the plane is defined by the origin, "X Direction" and "Y Direction" of this coordinate system. This coordinate system is the "local coordinate system" of the plane. The following apply:

Constructor & Destructor Documentation

◆ Geom_Plane() [1/4]

Geom_Plane::Geom_Plane ( const gp_Ax3 A3)

Creates a plane located in 3D space with an axis placement three axis. The "ZDirection" of "A3" is the direction normal to the plane. The "Location" point of "A3" is the origin of the plane. The "XDirection" and "YDirection" of "A3" define the directions of the U isoparametric and V isoparametric curves.

◆ Geom_Plane() [2/4]

Geom_Plane::Geom_Plane ( const gp_Pln Pl)

Creates a plane from a non transient plane from package gp.

◆ Geom_Plane() [3/4]

Geom_Plane::Geom_Plane ( const gp_Pnt P,
const gp_Dir V 
)

P is the "Location" point or origin of the plane. V is the direction normal to the plane.

◆ Geom_Plane() [4/4]

Geom_Plane::Geom_Plane ( const Standard_Real  A,
const Standard_Real  B,
const Standard_Real  C,
const Standard_Real  D 
)

Creates a plane from its cartesian equation:

Ax + By + Cz + D = 0.0

Raised if Sqrt (A*A + B*B + C*C) <= Resolution from gp

Member Function Documentation

◆ Bounds()

void Geom_Plane::Bounds ( Standard_Real U1,
Standard_Real U2,
Standard_Real V1,
Standard_Real V2 
) const
overridevirtual

Returns the parametric bounds U1, U2, V1 and V2 of this plane. Because a plane is an infinite surface, the following is always true:

  • U1 = V1 = Standard_Real::RealFirst()
  • U2 = V2 = Standard_Real::RealLast().

Implements Geom_Surface.

◆ Coefficients()

void Geom_Plane::Coefficients ( Standard_Real A,
Standard_Real B,
Standard_Real C,
Standard_Real D 
) const

Computes the normalized coefficients of the plane's cartesian equation:

Ax + By + Cz + D = 0.0

◆ Copy()

Handle< Geom_Geometry > Geom_Plane::Copy ( ) const
overridevirtual

Creates a new object which is a copy of this plane.

Implements Geom_Geometry.

◆ D0()

void Geom_Plane::D0 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P 
) const
overridevirtual

Computes the point P (U, V) on <me>.

P = O + U * XDir + V * YDir.

where O is the "Location" point of the plane, XDir the "XDirection" and YDir the "YDirection" of the plane's local coordinate system.

Implements Geom_Surface.

◆ D1()

void Geom_Plane::D1 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V 
) const
overridevirtual

Computes the current point and the first derivatives in the directions U and V.

Implements Geom_Surface.

◆ D2()

void Geom_Plane::D2 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V,
gp_Vec D2U,
gp_Vec D2V,
gp_Vec D2UV 
) const
overridevirtual

Computes the current point, the first and the second derivatives in the directions U and V.

Implements Geom_Surface.

◆ D3()

void Geom_Plane::D3 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V,
gp_Vec D2U,
gp_Vec D2V,
gp_Vec D2UV,
gp_Vec D3U,
gp_Vec D3V,
gp_Vec D3UUV,
gp_Vec D3UVV 
) const
overridevirtual

Computes the current point, the first,the second and the third derivatives in the directions U and V.

Implements Geom_Surface.

◆ DN()

gp_Vec Geom_Plane::DN ( const Standard_Real  U,
const Standard_Real  V,
const Standard_Integer  Nu,
const Standard_Integer  Nv 
) const
overridevirtual

Computes the derivative of order Nu in the direction u and Nv in the direction v. Raised if Nu + Nv < 1 or Nu < 0 or Nv < 0.

Implements Geom_Surface.

◆ DumpJson()

virtual void Geom_Plane::DumpJson ( Standard_OStream theOStream,
Standard_Integer  theDepth = -1 
) const
overridevirtual

Dumps the content of me into the stream.

Reimplemented from Geom_ElementarySurface.

◆ IsUClosed()

Standard_Boolean Geom_Plane::IsUClosed ( ) const
overridevirtual

return False

Implements Geom_Surface.

◆ IsUPeriodic()

Standard_Boolean Geom_Plane::IsUPeriodic ( ) const
overridevirtual

return False.

Implements Geom_Surface.

◆ IsVClosed()

Standard_Boolean Geom_Plane::IsVClosed ( ) const
overridevirtual

return False

Implements Geom_Surface.

◆ IsVPeriodic()

Standard_Boolean Geom_Plane::IsVPeriodic ( ) const
overridevirtual

return False.

Implements Geom_Surface.

◆ ParametricTransformation()

virtual gp_GTrsf2d Geom_Plane::ParametricTransformation ( const gp_Trsf T) const
overridevirtual

Returns a 2d transformation used to find the new parameters of a point on the transformed surface.

me->Transformed(T)->Value(U',V')

is the same point as

me->Value(U,V).Transformed(T)

Where U',V' are obtained by transforming U,V with the 2d transformation returned by

me->ParametricTransformation(T)

This method returns a scale centered on the origin with T.ScaleFactor

Reimplemented from Geom_Surface.

◆ Pln()

gp_Pln Geom_Plane::Pln ( ) const

Converts this plane into a gp_Pln plane.

◆ SetPln()

void Geom_Plane::SetPln ( const gp_Pln Pl)

Set <me> so that <me> has the same geometric properties as Pl.

◆ Transform()

void Geom_Plane::Transform ( const gp_Trsf T)
overridevirtual

Applies the transformation T to this plane.

Implements Geom_Geometry.

◆ TransformParameters()

virtual void Geom_Plane::TransformParameters ( Standard_Real U,
Standard_Real V,
const gp_Trsf T 
) const
overridevirtual

Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>.

me->Transformed(T)->Value(U',V')

is the same point as

me->Value(U,V).Transformed(T)

Where U',V' are the new values of U,V after calling

me->TransformParameters(U,V,T)

This method multiplies U and V by T.ScaleFactor()

Reimplemented from Geom_Surface.

◆ UIso()

Handle< Geom_Curve > Geom_Plane::UIso ( const Standard_Real  U) const
overridevirtual

Computes the U isoparametric curve. This is a Line parallel to the YAxis of the plane.

Implements Geom_Surface.

◆ UReverse()

virtual void Geom_Plane::UReverse ( )
overridevirtual

Changes the orientation of this plane in the u (or v) parametric direction. The bounds of the plane are not changed but the given parametric direction is reversed. Hence the orientation of the surface is reversed.

Reimplemented from Geom_ElementarySurface.

◆ UReversedParameter()

Standard_Real Geom_Plane::UReversedParameter ( const Standard_Real  U) const
overridevirtual

Computes the u parameter on the modified plane, produced when reversing the u parametric of this plane, for any point of u parameter U on this plane. In the case of a plane, these methods return - -U.

Implements Geom_ElementarySurface.

◆ VIso()

Handle< Geom_Curve > Geom_Plane::VIso ( const Standard_Real  V) const
overridevirtual

Computes the V isoparametric curve. This is a Line parallel to the XAxis of the plane.

Implements Geom_Surface.

◆ VReverse()

virtual void Geom_Plane::VReverse ( )
overridevirtual

Changes the orientation of this plane in the u (or v) parametric direction. The bounds of the plane are not changed but the given parametric direction is reversed. Hence the orientation of the surface is reversed.

Reimplemented from Geom_ElementarySurface.

◆ VReversedParameter()

Standard_Real Geom_Plane::VReversedParameter ( const Standard_Real  V) const
overridevirtual

Computes the v parameter on the modified plane, produced when reversing the v parametric of this plane, for any point of v parameter V on this plane. In the case of a plane, these methods return -V.

Implements Geom_ElementarySurface.


The documentation for this class was generated from the following file: