Open CASCADE Technology  7.6.0
Public Member Functions

IntCurvesFace_Intersector Class Reference

#include <IntCurvesFace_Intersector.hxx>

Public Member Functions

 IntCurvesFace_Intersector (const TopoDS_Face &F, const Standard_Real aTol, const Standard_Boolean aRestr=Standard_True, const Standard_Boolean UseBToler=Standard_True)
 Load a Face. More...
 
void Perform (const gp_Lin &L, const Standard_Real PInf, const Standard_Real PSup)
 Perform the intersection between the segment L and the loaded face. More...
 
void Perform (const Handle< Adaptor3d_Curve > &HCu, const Standard_Real PInf, const Standard_Real PSup)
 same method for a HCurve from Adaptor3d. PInf an PSup can also be - and + INF. More...
 
GeomAbs_SurfaceType SurfaceType () const
 Return the surface type. More...
 
Standard_Boolean IsDone () const
 True is returned when the intersection have been computed. More...
 
Standard_Integer NbPnt () const
 
Standard_Real UParameter (const Standard_Integer I) const
 Returns the U parameter of the ith intersection point on the surface. More...
 
Standard_Real VParameter (const Standard_Integer I) const
 Returns the V parameter of the ith intersection point on the surface. More...
 
Standard_Real WParameter (const Standard_Integer I) const
 Returns the parameter of the ith intersection point on the line. More...
 
const gp_PntPnt (const Standard_Integer I) const
 Returns the geometric point of the ith intersection between the line and the surface. More...
 
IntCurveSurface_TransitionOnCurve Transition (const Standard_Integer I) const
 Returns the ith transition of the line on the surface. More...
 
TopAbs_State State (const Standard_Integer I) const
 Returns the ith state of the point on the face. The values can be either TopAbs_IN ( the point is in the face) or TopAbs_ON ( the point is on a boundary of the face). More...
 
Standard_Boolean IsParallel () const
 Returns true if curve is parallel or belongs face surface This case is recognized only for some pairs of analytical curves and surfaces (plane - line, ...) More...
 
const TopoDS_FaceFace () const
 Returns the significant face used to determine the intersection. More...
 
TopAbs_State ClassifyUVPoint (const gp_Pnt2d &Puv) const
 
Bnd_Box Bounding () const
 
void SetUseBoundToler (Standard_Boolean UseBToler)
 Sets the boundary tolerance flag. More...
 
Standard_Boolean GetUseBoundToler () const
 Returns the boundary tolerance flag. More...
 
void Destroy ()
 
 ~IntCurvesFace_Intersector ()
 

Constructor & Destructor Documentation

◆ IntCurvesFace_Intersector()

IntCurvesFace_Intersector::IntCurvesFace_Intersector ( const TopoDS_Face F,
const Standard_Real  aTol,
const Standard_Boolean  aRestr = Standard_True,
const Standard_Boolean  UseBToler = Standard_True 
)

Load a Face.

The Tolerance <Tol> is used to determine if the first point of the segment is near the face. In that case, the parameter of the intersection point on the line can be a negative value (greater than -Tol). If aRestr = true UV bounding box of face is used to restrict it's underlined surface, otherwise surface is not restricted. If UseBToler = false then the 2d-point of intersection is classified with null-tolerance (relative to face); otherwise it's using maximum between input tolerance(aTol) and tolerances of face bounds (edges).

◆ ~IntCurvesFace_Intersector()

IntCurvesFace_Intersector::~IntCurvesFace_Intersector ( )
inline

Member Function Documentation

◆ Bounding()

Bnd_Box IntCurvesFace_Intersector::Bounding ( ) const

◆ ClassifyUVPoint()

TopAbs_State IntCurvesFace_Intersector::ClassifyUVPoint ( const gp_Pnt2d Puv) const

◆ Destroy()

void IntCurvesFace_Intersector::Destroy ( )

◆ Face()

const TopoDS_Face& IntCurvesFace_Intersector::Face ( ) const

Returns the significant face used to determine the intersection.

◆ GetUseBoundToler()

Standard_Boolean IntCurvesFace_Intersector::GetUseBoundToler ( ) const

Returns the boundary tolerance flag.

◆ IsDone()

Standard_Boolean IntCurvesFace_Intersector::IsDone ( ) const

True is returned when the intersection have been computed.

◆ IsParallel()

Standard_Boolean IntCurvesFace_Intersector::IsParallel ( ) const

Returns true if curve is parallel or belongs face surface This case is recognized only for some pairs of analytical curves and surfaces (plane - line, ...)

◆ NbPnt()

Standard_Integer IntCurvesFace_Intersector::NbPnt ( ) const

◆ Perform() [1/2]

void IntCurvesFace_Intersector::Perform ( const gp_Lin L,
const Standard_Real  PInf,
const Standard_Real  PSup 
)

Perform the intersection between the segment L and the loaded face.

PInf is the smallest parameter on the line PSup is the highest parameter on the line

For an infinite line PInf and PSup can be +/- RealLast.

◆ Perform() [2/2]

void IntCurvesFace_Intersector::Perform ( const Handle< Adaptor3d_Curve > &  HCu,
const Standard_Real  PInf,
const Standard_Real  PSup 
)

same method for a HCurve from Adaptor3d. PInf an PSup can also be - and + INF.

◆ Pnt()

const gp_Pnt& IntCurvesFace_Intersector::Pnt ( const Standard_Integer  I) const

Returns the geometric point of the ith intersection between the line and the surface.

◆ SetUseBoundToler()

void IntCurvesFace_Intersector::SetUseBoundToler ( Standard_Boolean  UseBToler)

Sets the boundary tolerance flag.

◆ State()

TopAbs_State IntCurvesFace_Intersector::State ( const Standard_Integer  I) const

Returns the ith state of the point on the face. The values can be either TopAbs_IN ( the point is in the face) or TopAbs_ON ( the point is on a boundary of the face).

◆ SurfaceType()

GeomAbs_SurfaceType IntCurvesFace_Intersector::SurfaceType ( ) const

Return the surface type.

◆ Transition()

IntCurveSurface_TransitionOnCurve IntCurvesFace_Intersector::Transition ( const Standard_Integer  I) const

Returns the ith transition of the line on the surface.

◆ UParameter()

Standard_Real IntCurvesFace_Intersector::UParameter ( const Standard_Integer  I) const

Returns the U parameter of the ith intersection point on the surface.

◆ VParameter()

Standard_Real IntCurvesFace_Intersector::VParameter ( const Standard_Integer  I) const

Returns the V parameter of the ith intersection point on the surface.

◆ WParameter()

Standard_Real IntCurvesFace_Intersector::WParameter ( const Standard_Integer  I) const

Returns the parameter of the ith intersection point on the line.


The documentation for this class was generated from the following file: