The class represents the Intersection phase of the Boolean Operations algorithm.
It performs the pairwise intersection of the sub-shapes of the arguments in the following order:
More...

#include <BOPAlgo_PaveFiller.hxx>

Inheritance diagram for BOPAlgo_PaveFiller:

[legend]

Data Structures
struct	EdgeRangeDistance
	Auxiliary structure to hold the edge distance to the face. More...

Public Member Functions
	BOPAlgo_PaveFiller ()

virtual	~BOPAlgo_PaveFiller ()

	BOPAlgo_PaveFiller (const Handle< NCollection_BaseAllocator > &theAllocator)

const BOPDS_DS &	DS ()

BOPDS_PDS	PDS ()

const BOPDS_PIterator &	Iterator ()

void	SetArguments (const TopTools_ListOfShape &theLS)
	Sets the arguments for operation. More...

void	AddArgument (const TopoDS_Shape &theShape)
	Adds the argument for operation. More...

const TopTools_ListOfShape &	Arguments () const
	Returns the list of arguments. More...

const Handle< IntTools_Context > &	Context ()

void	SetSectionAttribute (const BOPAlgo_SectionAttribute &theSecAttr)

void	SetNonDestructive (const Standard_Boolean theFlag)
	Sets the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated. More...

Standard_Boolean	NonDestructive () const
	Returns the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated. More...

virtual void	Perform (const Message_ProgressRange &theRange=Message_ProgressRange()) override
	The main method to implement the operation Providing the range allows to enable Progress indicator User break functionalities. More...

void	SetGlue (const BOPAlgo_GlueEnum theGlue)
	Sets the glue option for the algorithm. More...

BOPAlgo_GlueEnum	Glue () const
	Returns the glue option of the algorithm. More...

void	SetAvoidBuildPCurve (const Standard_Boolean theValue)
	Sets the flag to avoid building of p-curves of edges on faces. More...

Standard_Boolean	IsAvoidBuildPCurve () const
	Returns the flag to avoid building of p-curves of edges on faces. More...

Public Member Functions inherited from BOPAlgo_Options
	BOPAlgo_Options ()
	Empty constructor. More...

	BOPAlgo_Options (const Handle< NCollection_BaseAllocator > &theAllocator)
	Constructor with allocator. More...

virtual	~BOPAlgo_Options ()
	Destructor. More...

const Handle< NCollection_BaseAllocator > &	Allocator () const
	Returns allocator. More...

void	AddError (const Handle< Message_Alert > &theAlert)
	Adds the alert as error (fail) More...

void	AddWarning (const Handle< Message_Alert > &theAlert)
	Adds the alert as warning. More...

Standard_Boolean	HasErrors () const
	Returns true if algorithm has failed. More...

Standard_Boolean	HasError (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated error of specified type. More...

Standard_Boolean	HasWarnings () const
	Returns true if algorithm has generated some warning alerts. More...

Standard_Boolean	HasWarning (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated warning of specified type. More...

const Handle< Message_Report > &	GetReport () const
	Returns report collecting all errors and warnings. More...

void	DumpErrors (Standard_OStream &theOS) const
	Dumps the error status into the given stream. More...

void	DumpWarnings (Standard_OStream &theOS) const
	Dumps the warning statuses into the given stream. More...

void	ClearWarnings ()
	Clears the warnings of the algorithm. More...

void	SetFuzzyValue (const Standard_Real theFuzz)
	Sets the additional tolerance. More...

Standard_Real	FuzzyValue () const
	Returns the additional tolerance. More...

void	SetRunParallel (const Standard_Boolean theFlag)
	Set the flag of parallel processing if <theFlag> is true the parallel processing is switched on if <theFlag> is false the parallel processing is switched off. More...

Standard_Boolean	RunParallel () const
	Returns the flag of parallel processing. More...

void	SetUseOBB (const Standard_Boolean theUseOBB)
	Enables/Disables the usage of OBB. More...

Standard_Boolean	UseOBB () const
	Returns the flag defining usage of OBB. More...

Protected Types
typedef NCollection_DataMap< Handle< BOPDS_PaveBlock >, Bnd_Box, TColStd_MapTransientHasher >	BOPAlgo_DataMapOfPaveBlockBndBox

typedef NCollection_DataMap< Handle< BOPDS_PaveBlock >, TColStd_ListOfInteger, TColStd_MapTransientHasher >	BOPAlgo_DataMapOfPaveBlockListOfInteger

typedef NCollection_DataMap< Standard_Integer, BOPDS_MapOfPaveBlock >	BOPAlgo_DataMapOfIntegerMapOfPaveBlock

Protected Member Functions
void	SetNonDestructive ()
	Sets non-destructive mode automatically if an argument contains a locked sub-shape (see TopoDS_Shape::Locked()). More...

void	SetIsPrimary (const Standard_Boolean theFlag)

Standard_Boolean	IsPrimary () const

virtual void	PerformInternal (const Message_ProgressRange &theRange)

virtual void	Clear () override
	Clears all warnings and errors, and any data cached by the algorithm. User defined options are not cleared. More...

virtual void	Init (const Message_ProgressRange &theRange)

void	Prepare (const Message_ProgressRange &theRange)

virtual void	PerformVV (const Message_ProgressRange &theRange)

virtual void	PerformVE (const Message_ProgressRange &theRange)

void	IntersectVE (const BOPDS_IndexedDataMapOfPaveBlockListOfInteger &theVEPairs, const Message_ProgressRange &theRange, const Standard_Boolean bAddInterfs=Standard_True)
	Performs the intersection of the vertices with edges. More...

void	SplitPaveBlocks (const TColStd_MapOfInteger &theMEdges, const Standard_Boolean theAddInterfs)
	Splits the Pave Blocks of the given edges with the extra paves. The method also builds the shrunk data for the new pave blocks and in case there is no valid range on the pave block, the vertices of this pave block will be united making SD vertex. Parameter <theAddInterfs> defines whether this interference will be added into common table of interferences or not. If some of the Pave Blocks are forming the Common Blocks, the splits of the Pave Blocks will also form a Common Block. More...

virtual void	PerformVF (const Message_ProgressRange &theRange)

virtual void	PerformEE (const Message_ProgressRange &theRange)

virtual void	PerformEF (const Message_ProgressRange &theRange)

virtual void	PerformFF (const Message_ProgressRange &theRange)

void	TreatVerticesEE ()

void	MakeSDVerticesFF (const TColStd_DataMapOfIntegerListOfInteger &aDMVLV, TColStd_DataMapOfIntegerInteger &theDMNewSD)

void	MakeSplitEdges (const Message_ProgressRange &theRange)

void	MakeBlocks (const Message_ProgressRange &theRange)

void	MakePCurves (const Message_ProgressRange &theRange)

Standard_Integer	MakeSDVertices (const TColStd_ListOfInteger &theVertIndices, const Standard_Boolean theAddInterfs=1)

void	ProcessDE (const Message_ProgressRange &theRange)

void	FillShrunkData (Handle< BOPDS_PaveBlock > &thePB)

void	FillShrunkData (const TopAbs_ShapeEnum theType1, const TopAbs_ShapeEnum theType2)

void	AnalyzeShrunkData (const Handle< BOPDS_PaveBlock > &thePB, const IntTools_ShrunkRange &theSR)
	Analyzes the results of computation of the valid range for the pave block and in case of error adds the warning status, otherwise saves the valid range in the pave block. More...

void	PerformNewVertices (BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &theMVCPB, const Handle< NCollection_BaseAllocator > &theAllocator, const Message_ProgressRange &theRange, const Standard_Boolean theIsEEIntersection=Standard_True)
	Performs intersection of new vertices, obtained in E/E and E/F intersections. More...

Standard_Boolean	CheckFacePaves (const TopoDS_Vertex &theVnew, const TColStd_MapOfInteger &theMIF)

Standard_Boolean	IsExistingVertex (const gp_Pnt &theP, const Standard_Real theTol, const TColStd_MapOfInteger &theMVOn) const

void	PutPavesOnCurve (const TColStd_MapOfInteger &theMVOnIn, const TColStd_MapOfInteger &theMVCommon, BOPDS_Curve &theNC, const TColStd_MapOfInteger &theMI, const TColStd_MapOfInteger &theMVEF, TColStd_DataMapOfIntegerReal &theMVTol, TColStd_DataMapOfIntegerListOfInteger &theDMVLV)
	Checks and puts paves from <theMVOnIn> on the curve <theNC>. At that, common (from theMVCommon) and not common vertices are processed differently. More...

void	FilterPavesOnCurves (const BOPDS_VectorOfCurve &theVNC, TColStd_DataMapOfIntegerReal &theMVTol)

Standard_Boolean	ExtendedTolerance (const Standard_Integer nV, const TColStd_MapOfInteger &aMI, Standard_Real &aTolVExt, const Standard_Integer aType=0)
	Depending on the parameter aType it checks whether the vertex nV was created in EE or EF intersections. If so, it increases aTolVExt from tolerance value of vertex to the max distance from vertex nV to the ends of the range of common part. Possible values of aType: 1 - checks only EE; 2 - checks only EF; other - checks both types of intersections. More...

void	PutBoundPaveOnCurve (const TopoDS_Face &theF1, const TopoDS_Face &theF2, BOPDS_Curve &theNC, TColStd_ListOfInteger &theLBV)

Standard_Boolean	IsExistingPaveBlock (const Handle< BOPDS_PaveBlock > &thePB, const BOPDS_Curve &theNC, const Standard_Real theTolR3D, const BOPDS_IndexedMapOfPaveBlock &theMPB, BOPTools_BoxTree &thePBTree, const BOPDS_MapOfPaveBlock &theMPBCommon, Handle< BOPDS_PaveBlock > &thePBOut, Standard_Real &theTolNew)
	Checks if the given pave block (created on section curve) coincides with any of the pave blocks of the faces created the section curve. More...

Standard_Boolean	IsExistingPaveBlock (const Handle< BOPDS_PaveBlock > &thePB, const BOPDS_Curve &theNC, const TColStd_ListOfInteger &theLSE, Standard_Integer &theNEOut, Standard_Real &theTolNew)
	Checks if the given pave block (created on section curve) coincides with any of the edges shared between the faces created the section curve. More...

void	PostTreatFF (BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &theMSCPB, BOPDS_DataMapOfPaveBlockListOfPaveBlock &theDMExEdges, TColStd_DataMapOfIntegerInteger &theDMNewSD, const BOPDS_IndexedMapOfPaveBlock &theMicroPB, const TopTools_IndexedMapOfShape &theVertsOnRejectedPB, const Handle< NCollection_BaseAllocator > &theAllocator, const Message_ProgressRange &theRange)
	Treatment of section edges. More...

void	FindPaveBlocks (const Standard_Integer theV, const Standard_Integer theF, BOPDS_ListOfPaveBlock &theLPB)

void	FillPaves (const Standard_Integer theV, const Standard_Integer theE, const Standard_Integer theF, const BOPDS_ListOfPaveBlock &theLPB, const Handle< BOPDS_PaveBlock > &thePB)

void	MakeSplitEdge (const Standard_Integer theV, const Standard_Integer theF)

void	GetEFPnts (const Standard_Integer nF1, const Standard_Integer nF2, IntSurf_ListOfPntOn2S &aListOfPnts)

void	PutEFPavesOnCurve (const BOPDS_VectorOfCurve &theVC, const Standard_Integer theIndex, const TColStd_MapOfInteger &theMI, const TColStd_MapOfInteger &theMVEF, TColStd_DataMapOfIntegerReal &theMVTol, TColStd_DataMapOfIntegerListOfInteger &aDMVLV)
	Checks and puts paves created in EF intersections on the curve <theNC>. More...

void	PutStickPavesOnCurve (const TopoDS_Face &aF1, const TopoDS_Face &aF2, const TColStd_MapOfInteger &theMI, const BOPDS_VectorOfCurve &theVC, const Standard_Integer theIndex, const TColStd_MapOfInteger &theMVStick, TColStd_DataMapOfIntegerReal &theMVTol, TColStd_DataMapOfIntegerListOfInteger &aDMVLV)
	Puts stick paves on the curve <theNC> More...

void	GetStickVertices (const Standard_Integer nF1, const Standard_Integer nF2, TColStd_MapOfInteger &theMVStick, TColStd_MapOfInteger &theMVEF, TColStd_MapOfInteger &theMI)
	Collects indices of vertices created in all intersections between two faces (<nF1> and <nF2>) to the map <theMVStick>. Also, it collects indices of EF vertices to the <theMVEF> map and indices of all subshapes of these two faces to the <theMI> map. More...

void	GetFullShapeMap (const Standard_Integer nF, TColStd_MapOfInteger &theMI)
	Collects index nF and indices of all subshapes of the shape with index <nF> to the map <theMI>. More...

void	RemoveUsedVertices (const BOPDS_VectorOfCurve &theVC, TColStd_MapOfInteger &theMV)
	Removes indices of vertices that are already on the curve <theNC> from the map <theMV>. It is used in PutEFPavesOnCurve and PutStickPavesOnCurve methods. More...

void	PutPaveOnCurve (const Standard_Integer nV, const Standard_Real theTolR3D, const BOPDS_Curve &theNC, const TColStd_MapOfInteger &theMI, TColStd_DataMapOfIntegerReal &theMVTol, TColStd_DataMapOfIntegerListOfInteger &aDMVLV, const Standard_Integer aType=0)
	Puts the pave nV on the curve theNC. Parameter aType defines whether to check the pave with extended tolerance: 0 - do not perform the check; other - perform the check (aType goes to ExtendedTolerance). More...

void	ProcessExistingPaveBlocks (const Standard_Integer theInt, const Standard_Integer theCur, const Standard_Integer nF1, const Standard_Integer nF2, const TopoDS_Edge &theES, const BOPDS_IndexedMapOfPaveBlock &theMPBOnIn, BOPTools_BoxTree &thePBTree, BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &theMSCPB, TopTools_DataMapOfShapeInteger &theMVI, BOPDS_ListOfPaveBlock &theLPBC, BOPAlgo_DataMapOfPaveBlockListOfInteger &thePBFacesMap, BOPDS_MapOfPaveBlock &theMPB)
	Adds the existing edges for intersection with section edges by checking the possible intersection with the faces comparing pre-saved E-F distances with new tolerances. More...

void	ProcessExistingPaveBlocks (const Standard_Integer theInt, const Standard_Integer nF1, const Standard_Integer nF2, const BOPDS_IndexedMapOfPaveBlock &theMPBOnIn, BOPTools_BoxTree &thePBTree, const TColStd_DataMapOfIntegerListOfInteger &theDMBV, BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &theMSCPB, TopTools_DataMapOfShapeInteger &theMVI, BOPAlgo_DataMapOfPaveBlockListOfInteger &thePBFacesMap, BOPDS_MapOfPaveBlock &theMPB)
	Adds the existing edges from the map <theMPBOnIn> which interfere with the vertices from <theMVB> map to the post treatment of section edges. More...

void	UpdateExistingPaveBlocks (const Handle< BOPDS_PaveBlock > &thePB, BOPDS_ListOfPaveBlock &theLPB, const BOPAlgo_DataMapOfPaveBlockListOfInteger &thePBFacesMap)
	Replaces existing pave block <thePB> with new pave blocks <theLPB>. The list <theLPB> contains images of <thePB> which were created in the post treatment of section edges. Tries to project the new edges on the faces contained in the <thePBFacesMap>. More...

void	TreatNewVertices (const BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &theMVCPB, TopTools_IndexedDataMapOfShapeListOfShape &theImages)
	Treatment of vertices that were created in EE intersections. More...

void	PutClosingPaveOnCurve (BOPDS_Curve &aNC)
	Put paves on the curve <aBC> in case when <aBC> is closed 3D-curve. More...

void	PreparePostTreatFF (const Standard_Integer aInt, const Standard_Integer aCur, const Handle< BOPDS_PaveBlock > &aPB, BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &aMSCPB, TopTools_DataMapOfShapeInteger &aMVI, BOPDS_ListOfPaveBlock &aLPB)
	Keeps data for post treatment. More...

void	UpdateFaceInfo (BOPDS_DataMapOfPaveBlockListOfPaveBlock &theDME, const TColStd_DataMapOfIntegerInteger &theDMV, const BOPAlgo_DataMapOfPaveBlockListOfInteger &thePBFacesMap)
	Updates the information about faces. More...

Standard_Boolean	ForceInterfVE (const Standard_Integer nV, Handle< BOPDS_PaveBlock > &aPB, TColStd_MapOfInteger &theMEdges)
	Updates tolerance of vertex with index <nV> to make it interfere with edge. Returns TRUE if intersection happened. More...

Standard_Boolean	ForceInterfVF (const Standard_Integer nV, const Standard_Integer nF)
	Updates tolerance of vertex with index <nV> to make it interfere with face with index <nF> More...

Standard_Boolean	CheckPlanes (const Standard_Integer nF1, const Standard_Integer nF2) const
	Checks if there are any common or intersecting sub shapes between two planar faces. More...

Standard_Integer	SplitEdge (const Standard_Integer nE, const Standard_Integer nV1, const Standard_Real aT1, const Standard_Integer nV2, const Standard_Real aT2)
	Creates new edge from the edge nE with vertices nV1 and nV2 and returns the index of that new edge in the DS. More...

void	UpdatePaveBlocks (const TColStd_DataMapOfIntegerInteger &aDMNewSD)
	Updates pave blocks which have the paves with indices contained in the map <aDMNewSD>. More...

Standard_Integer	UpdateVertex (const Standard_Integer nV, const Standard_Real aTolNew)
	Updates tolerance vertex nV due to V/E interference. It always creates new vertex if nV is from arguments. More...

void	UpdatePaveBlocksWithSDVertices ()

void	UpdateCommonBlocksWithSDVertices ()

void	UpdateBlocksWithSharedVertices ()

void	UpdateInterfsWithSDVertices ()

Standard_Boolean	EstimatePaveOnCurve (const Standard_Integer nV, const BOPDS_Curve &theNC, const Standard_Real theTolR3D)

void	UpdateEdgeTolerance (const Standard_Integer nE, const Standard_Real aTolNew)

void	RemovePaveBlocks (const TColStd_MapOfInteger &theEdges)

void	CorrectToleranceOfSE ()

void	ReduceIntersectionRange (const Standard_Integer theV1, const Standard_Integer theV2, const Standard_Integer theE, const Standard_Integer theF, Standard_Real &theTS1, Standard_Real &theTS2)
	Reduce the intersection range using the common ranges of Edge/Edge interferences to avoid creation of close intersection vertices. More...

Standard_Boolean	GetPBBox (const TopoDS_Edge &theE, const Handle< BOPDS_PaveBlock > &thePB, BOPAlgo_DataMapOfPaveBlockBndBox &thePBBox, Standard_Real &theFirst, Standard_Real &theLast, Standard_Real &theSFirst, Standard_Real &theSLast, Bnd_Box &theBox)
	Gets the bounding box for the given Pave Block. If Pave Block has shrunk data it will be used to get the box, and the Shrunk Range (<theSFirst>, <theSLast>). Otherwise the box will be computed using BndLib_Add3dCurve method, and the Shrunk Range will be equal to the PB's range. To avoid re-computation of the bounding box for the same Pave Block it will be saved in the map <thePBBox>. Returns FALSE in case the PB's range is less than the Precision::PConfusion(), otherwise returns TRUE. More...

void	PutSEInOtherFaces (const Message_ProgressRange &theRange)
	Treatment of the possible common zones, not detected by the Face/Face intersection algorithm, by intersection of each section edge with all faces not participated in creation of that section edge. If the intersection says that the section edge is lying on the face it will be added into FaceInfo structure of the face as IN edge and will be used for splitting. More...

void	CheckSelfInterference ()
	Analyzes the results of interferences of sub-shapes of the shapes looking for self-interfering entities by the following rules: More...

void	AddIntersectionFailedWarning (const TopoDS_Shape &theS1, const TopoDS_Shape &theS2)
	Adds the warning about failed intersection of pair of sub-shapes. More...

void	RepeatIntersection (const Message_ProgressRange &theRange)
	Repeat intersection of sub-shapes with increased vertices. More...

void	UpdateVerticesOfCB ()
	Updates vertices of CommonBlocks with real tolerance of CB. More...

void	ForceInterfEE (const Message_ProgressRange &theRange)
	The method looks for the additional common blocks among pairs of edges with the same bounding vertices. More...

void	ForceInterfEF (const Message_ProgressRange &theRange)
	The method looks for the additional edge/face common blocks among pairs of edge/face having the same vertices. More...

void	ForceInterfEF (const BOPDS_IndexedMapOfPaveBlock &theMPB, const Message_ProgressRange &theRange, const Standard_Boolean theAddInterf)
	Performs intersection of given pave blocks with all faces from arguments. More...

void	RemoveMicroSectionEdges (BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &theMSCPB, BOPDS_IndexedMapOfPaveBlock &theMicroPB)
	When all section edges are created and no increase of the tolerance of vertices put on the section edges is expected, make sure that the created sections have valid range. If any of the section edges do not have valid range, remove them from Face/Face intersection info and from the input <theMSCPB> map. Put such edges into <MicroPB> map for further unification of their vertices in the PostTreatFF method. More...

void	RemoveMicroEdges ()
	Check all edges on the micro status and remove the positive ones. More...

void	fillPIConstants (const Standard_Real theWhole, BOPAlgo_PISteps &theSteps) const override
	Analyzing Progress steps. More...

void	fillPISteps (BOPAlgo_PISteps &theSteps) const override
	Filling steps for all other operations. More...

Protected Member Functions inherited from BOPAlgo_Algo
	BOPAlgo_Algo ()
	Default constructor. More...

virtual	~BOPAlgo_Algo ()

	BOPAlgo_Algo (const Handle< NCollection_BaseAllocator > &theAllocator)

virtual void	CheckData ()
	Checks input data. More...

virtual void	CheckResult ()
	Checks the obtained result. More...

void	analyzeProgress (const Standard_Real theWhole, BOPAlgo_PISteps &theSteps) const
	Analyze progress steps of the whole operation. More...

Protected Member Functions inherited from BOPAlgo_Options
Standard_Boolean	UserBreak (const Message_ProgressScope &thePS)
	Adds error to the report if the break signal was caught. Returns true in this case, false otherwise. More...

Static Protected Member Functions
static Standard_Boolean	CheckFacePaves (const Standard_Integer theN, const TColStd_MapOfInteger &theMIFOn, const TColStd_MapOfInteger &theMIFIn)

Protected Attributes
TopTools_ListOfShape	myArguments
	Fields. More...

BOPDS_PDS	myDS

BOPDS_PIterator	myIterator

Handle< IntTools_Context >	myContext

BOPAlgo_SectionAttribute	mySectionAttribute

Standard_Boolean	myNonDestructive

Standard_Boolean	myIsPrimary

Standard_Boolean	myAvoidBuildPCurve

BOPAlgo_GlueEnum	myGlue

BOPAlgo_DataMapOfIntegerMapOfPaveBlock	myFPBDone
	Fence map of intersected faces and pave blocks. More...

TColStd_MapOfInteger	myIncreasedSS
	Sub-shapes with increased tolerance during the operation. More...

TColStd_MapOfInteger	myVertsToAvoidExtension
	Vertices located close to E/E or E/F intersection points which has already been extended to cover the real intersection points, and should not be extended any longer to be put on a section curve. More...

NCollection_DataMap< BOPDS_Pair, NCollection_List< EdgeRangeDistance >, BOPDS_PairMapHasher >	myDistances
	Map to store minimal distances between shapes which have no real intersections. More...

Protected Attributes inherited from BOPAlgo_Options
Handle< NCollection_BaseAllocator >	myAllocator
	Enables/Disables the usage of OBB. More...

Handle< Message_Report >	myReport
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myRunParallel
	Enables/Disables the usage of OBB. More...

Standard_Real	myFuzzyValue
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myUseOBB
	Enables/Disables the usage of OBB. More...

Additional Inherited Members
Static Public Member Functions inherited from BOPAlgo_Options
static Standard_Boolean	GetParallelMode ()
	Gets the global parallel mode. More...

static void	SetParallelMode (const Standard_Boolean theNewMode)
	Sets the global parallel mode. More...

Detailed Description

The class represents the Intersection phase of the Boolean Operations algorithm.
It performs the pairwise intersection of the sub-shapes of the arguments in the following order:

Vertex/Vertex;
Vertex/Edge;
Edge/Edge;
Vertex/Face;
Edge/Face;
Face/Face.

The results of intersection are stored into the Data Structure of the algorithm.

Additionally to the options provided by the parent class, the algorithm has the following options:

Section attributes - allows to customize the intersection of the faces (avoid approximation or building 2d curves);
Safe processing mode - allows to avoid modification of the input shapes during the operation (by default it is off);
Gluing options - allows to speed up the calculation on the special cases, in which some sub-shapes are coincide.

The algorithm returns the following Warning statuses:

BOPAlgo_AlertSelfInterferingShape - in case some of the argument shapes are self-interfering shapes;
BOPAlgo_AlertTooSmallEdge - in case some edges of the input shapes have no valid range;
BOPAlgo_AlertNotSplittableEdge - in case some edges of the input shapes has such a small valid range so it cannot be split;
BOPAlgo_AlertBadPositioning - in case the positioning of the input shapes leads to creation of small edges;
BOPAlgo_AlertIntersectionOfPairOfShapesFailed - in case intersection of some of the sub-shapes has failed;
BOPAlgo_AlertAcquiredSelfIntersection - in case some sub-shapes of the argument become connected through other shapes;
BOPAlgo_AlertBuildingPCurveFailed - in case building 2D curve for some of the edges on the faces has failed.

The algorithm returns the following Error alerts:

BOPAlgo_AlertTooFewArguments - in case there are no enough arguments to perform the operation;
BOPAlgo_AlertIntersectionFailed - in case some unexpected error occurred;
BOPAlgo_AlertNullInputShapes - in case some of the arguments are null shapes.

Member Typedef Documentation

◆ BOPAlgo_DataMapOfIntegerMapOfPaveBlock

typedef NCollection_DataMap<Standard_Integer, BOPDS_MapOfPaveBlock> BOPAlgo_PaveFiller::BOPAlgo_DataMapOfIntegerMapOfPaveBlock

protected

◆ BOPAlgo_DataMapOfPaveBlockBndBox

typedef NCollection_DataMap<Handle< BOPDS_PaveBlock >, Bnd_Box, TColStd_MapTransientHasher> BOPAlgo_PaveFiller::BOPAlgo_DataMapOfPaveBlockBndBox

protected

◆ BOPAlgo_DataMapOfPaveBlockListOfInteger

typedef NCollection_DataMap<Handle< BOPDS_PaveBlock >, TColStd_ListOfInteger, TColStd_MapTransientHasher> BOPAlgo_PaveFiller::BOPAlgo_DataMapOfPaveBlockListOfInteger

protected

Constructor & Destructor Documentation

◆ BOPAlgo_PaveFiller() [1/2]

BOPAlgo_PaveFiller::BOPAlgo_PaveFiller ( )

◆ ~BOPAlgo_PaveFiller()

virtual BOPAlgo_PaveFiller::~BOPAlgo_PaveFiller ( )

virtual

◆ BOPAlgo_PaveFiller() [2/2]

BOPAlgo_PaveFiller::BOPAlgo_PaveFiller ( const Handle< NCollection_BaseAllocator > & theAllocator )

Member Function Documentation

◆ AddArgument()

void BOPAlgo_PaveFiller::AddArgument ( const TopoDS_Shape & theShape )

inline

Adds the argument for operation.

◆ AddIntersectionFailedWarning()

void BOPAlgo_PaveFiller::AddIntersectionFailedWarning	(	const TopoDS_Shape &	theS1,
		const TopoDS_Shape &	theS2
	)

protected

Adds the warning about failed intersection of pair of sub-shapes.

◆ AnalyzeShrunkData()

void BOPAlgo_PaveFiller::AnalyzeShrunkData	(	const Handle< BOPDS_PaveBlock > &	thePB,
		const IntTools_ShrunkRange &	theSR
	)

protected

Analyzes the results of computation of the valid range for the pave block and in case of error adds the warning status, otherwise saves the valid range in the pave block.

◆ Arguments()

const TopTools_ListOfShape& BOPAlgo_PaveFiller::Arguments ( ) const

inline

Returns the list of arguments.

◆ CheckFacePaves() [1/2]

Standard_Boolean BOPAlgo_PaveFiller::CheckFacePaves	(	const TopoDS_Vertex &	theVnew,
		const TColStd_MapOfInteger &	theMIF
	)

protected

◆ CheckFacePaves() [2/2]

static Standard_Boolean BOPAlgo_PaveFiller::CheckFacePaves	(	const Standard_Integer	theN,
		const TColStd_MapOfInteger &	theMIFOn,
		const TColStd_MapOfInteger &	theMIFIn
	)

staticprotected

◆ CheckPlanes()

Standard_Boolean BOPAlgo_PaveFiller::CheckPlanes	(	const Standard_Integer	nF1,
		const Standard_Integer	nF2
	)		const

protected

Checks if there are any common or intersecting sub shapes between two planar faces.

◆ CheckSelfInterference()

void BOPAlgo_PaveFiller::CheckSelfInterference ( )

protected

Analyzes the results of interferences of sub-shapes of the shapes looking for self-interfering entities by the following rules:

The Faces of the same shape considered interfering in case they:
- Interfere with the other shapes in the same place (in the same vertex) or;
- Included in the same common block.
The Faces of the same shape considered interfering in case they share the IN or SECTION edges.
In case self-interference is found the warning is added.

◆ Clear()

virtual void BOPAlgo_PaveFiller::Clear ( )

overrideprotectedvirtual

Clears all warnings and errors, and any data cached by the algorithm. User defined options are not cleared.

Reimplemented from BOPAlgo_Options.

◆ Context()

const Handle< IntTools_Context >& BOPAlgo_PaveFiller::Context ( )

◆ CorrectToleranceOfSE()

void BOPAlgo_PaveFiller::CorrectToleranceOfSE ( )

protected

◆ DS()

const BOPDS_DS& BOPAlgo_PaveFiller::DS ( )

◆ EstimatePaveOnCurve()

Standard_Boolean BOPAlgo_PaveFiller::EstimatePaveOnCurve	(	const Standard_Integer	nV,
		const BOPDS_Curve &	theNC,
		const Standard_Real	theTolR3D
	)

protected

◆ ExtendedTolerance()

Standard_Boolean BOPAlgo_PaveFiller::ExtendedTolerance	(	const Standard_Integer	nV,
		const TColStd_MapOfInteger &	aMI,
		Standard_Real &	aTolVExt,
		const Standard_Integer	aType = `0`
	)

protected

Depending on the parameter aType it checks whether the vertex nV was created in EE or EF intersections. If so, it increases aTolVExt from tolerance value of vertex to the max distance from vertex nV to the ends of the range of common part. Possible values of aType: 1 - checks only EE; 2 - checks only EF; other - checks both types of intersections.

◆ FillPaves()

void BOPAlgo_PaveFiller::FillPaves	(	const Standard_Integer	theV,
		const Standard_Integer	theE,
		const Standard_Integer	theF,
		const BOPDS_ListOfPaveBlock &	theLPB,
		const Handle< BOPDS_PaveBlock > &	thePB
	)

protected

◆ fillPIConstants()

void BOPAlgo_PaveFiller::fillPIConstants	(	const Standard_Real	theWhole,
		BOPAlgo_PISteps &	theSteps
	)		const

overrideprotectedvirtual

Analyzing Progress steps.

Filling steps for constant operations

Reimplemented from BOPAlgo_Algo.

◆ fillPISteps()

void BOPAlgo_PaveFiller::fillPISteps ( BOPAlgo_PISteps & theSteps ) const

overrideprotectedvirtual

Filling steps for all other operations.

Reimplemented from BOPAlgo_Algo.

◆ FillShrunkData() [1/2]

void BOPAlgo_PaveFiller::FillShrunkData ( Handle< BOPDS_PaveBlock > & thePB )

protected

◆ FillShrunkData() [2/2]

void BOPAlgo_PaveFiller::FillShrunkData	(	const TopAbs_ShapeEnum	theType1,
		const TopAbs_ShapeEnum	theType2
	)

protected

◆ FilterPavesOnCurves()

void BOPAlgo_PaveFiller::FilterPavesOnCurves	(	const BOPDS_VectorOfCurve &	theVNC,
		TColStd_DataMapOfIntegerReal &	theMVTol
	)

protected

◆ FindPaveBlocks()

void BOPAlgo_PaveFiller::FindPaveBlocks	(	const Standard_Integer	theV,
		const Standard_Integer	theF,
		BOPDS_ListOfPaveBlock &	theLPB
	)

protected

◆ ForceInterfEE()

void BOPAlgo_PaveFiller::ForceInterfEE ( const Message_ProgressRange & theRange )

protected

The method looks for the additional common blocks among pairs of edges with the same bounding vertices.

◆ ForceInterfEF() [1/2]

void BOPAlgo_PaveFiller::ForceInterfEF ( const Message_ProgressRange & theRange )

protected

The method looks for the additional edge/face common blocks among pairs of edge/face having the same vertices.

◆ ForceInterfEF() [2/2]

void BOPAlgo_PaveFiller::ForceInterfEF	(	const BOPDS_IndexedMapOfPaveBlock &	theMPB,
		const Message_ProgressRange &	theRange,
		const Standard_Boolean	theAddInterf
	)

protected

Performs intersection of given pave blocks with all faces from arguments.

◆ ForceInterfVE()

Standard_Boolean BOPAlgo_PaveFiller::ForceInterfVE	(	const Standard_Integer	nV,
		Handle< BOPDS_PaveBlock > &	aPB,
		TColStd_MapOfInteger &	theMEdges
	)

protected

Updates tolerance of vertex with index <nV> to make it interfere with edge. Returns TRUE if intersection happened.

◆ ForceInterfVF()

Standard_Boolean BOPAlgo_PaveFiller::ForceInterfVF	(	const Standard_Integer	nV,
		const Standard_Integer	nF
	)

protected

Updates tolerance of vertex with index <nV> to make it interfere with face with index <nF>

◆ GetEFPnts()

void BOPAlgo_PaveFiller::GetEFPnts	(	const Standard_Integer	nF1,
		const Standard_Integer	nF2,
		IntSurf_ListOfPntOn2S &	aListOfPnts
	)

protected

◆ GetFullShapeMap()

void BOPAlgo_PaveFiller::GetFullShapeMap	(	const Standard_Integer	nF,
		TColStd_MapOfInteger &	theMI
	)

protected

Collects index nF and indices of all subshapes of the shape with index <nF> to the map <theMI>.

◆ GetPBBox()

Standard_Boolean BOPAlgo_PaveFiller::GetPBBox	(	const TopoDS_Edge &	theE,
		const Handle< BOPDS_PaveBlock > &	thePB,
		BOPAlgo_DataMapOfPaveBlockBndBox &	thePBBox,
		Standard_Real &	theFirst,
		Standard_Real &	theLast,
		Standard_Real &	theSFirst,
		Standard_Real &	theSLast,
		Bnd_Box &	theBox
	)

protected

Gets the bounding box for the given Pave Block. If Pave Block has shrunk data it will be used to get the box, and the Shrunk Range (<theSFirst>, <theSLast>). Otherwise the box will be computed using BndLib_Add3dCurve method, and the Shrunk Range will be equal to the PB's range. To avoid re-computation of the bounding box for the same Pave Block it will be saved in the map <thePBBox>. Returns FALSE in case the PB's range is less than the Precision::PConfusion(), otherwise returns TRUE.

◆ GetStickVertices()

void BOPAlgo_PaveFiller::GetStickVertices	(	const Standard_Integer	nF1,
		const Standard_Integer	nF2,
		TColStd_MapOfInteger &	theMVStick,
		TColStd_MapOfInteger &	theMVEF,
		TColStd_MapOfInteger &	theMI
	)

protected

Collects indices of vertices created in all intersections between two faces (<nF1> and <nF2>) to the map <theMVStick>. Also, it collects indices of EF vertices to the <theMVEF> map and indices of all subshapes of these two faces to the <theMI> map.

◆ Glue()

BOPAlgo_GlueEnum BOPAlgo_PaveFiller::Glue ( ) const

Returns the glue option of the algorithm.

◆ Init()

virtual void BOPAlgo_PaveFiller::Init ( const Message_ProgressRange & theRange )

protectedvirtual

Reimplemented in BOPAlgo_CheckerSI.

◆ IntersectVE()

void BOPAlgo_PaveFiller::IntersectVE	(	const BOPDS_IndexedDataMapOfPaveBlockListOfInteger &	theVEPairs,
		const Message_ProgressRange &	theRange,
		const Standard_Boolean	bAddInterfs = `Standard_True`
	)

protected

Performs the intersection of the vertices with edges.

◆ IsAvoidBuildPCurve()

Standard_Boolean BOPAlgo_PaveFiller::IsAvoidBuildPCurve ( ) const

inline

Returns the flag to avoid building of p-curves of edges on faces.

◆ IsExistingPaveBlock() [1/2]

Standard_Boolean BOPAlgo_PaveFiller::IsExistingPaveBlock	(	const Handle< BOPDS_PaveBlock > &	thePB,
		const BOPDS_Curve &	theNC,
		const Standard_Real	theTolR3D,
		const BOPDS_IndexedMapOfPaveBlock &	theMPB,
		BOPTools_BoxTree &	thePBTree,
		const BOPDS_MapOfPaveBlock &	theMPBCommon,
		Handle< BOPDS_PaveBlock > &	thePBOut,
		Standard_Real &	theTolNew
	)

protected

Checks if the given pave block (created on section curve) coincides with any of the pave blocks of the faces created the section curve.

◆ IsExistingPaveBlock() [2/2]

Standard_Boolean BOPAlgo_PaveFiller::IsExistingPaveBlock	(	const Handle< BOPDS_PaveBlock > &	thePB,
		const BOPDS_Curve &	theNC,
		const TColStd_ListOfInteger &	theLSE,
		Standard_Integer &	theNEOut,
		Standard_Real &	theTolNew
	)

protected

Checks if the given pave block (created on section curve) coincides with any of the edges shared between the faces created the section curve.

◆ IsExistingVertex()

Standard_Boolean BOPAlgo_PaveFiller::IsExistingVertex	(	const gp_Pnt &	theP,
		const Standard_Real	theTol,
		const TColStd_MapOfInteger &	theMVOn
	)		const

protected

◆ IsPrimary()

Standard_Boolean BOPAlgo_PaveFiller::IsPrimary ( ) const

protected

◆ Iterator()

const BOPDS_PIterator& BOPAlgo_PaveFiller::Iterator ( )

◆ MakeBlocks()

void BOPAlgo_PaveFiller::MakeBlocks ( const Message_ProgressRange & theRange )

protected

◆ MakePCurves()

void BOPAlgo_PaveFiller::MakePCurves ( const Message_ProgressRange & theRange )

protected

◆ MakeSDVertices()

Standard_Integer BOPAlgo_PaveFiller::MakeSDVertices	(	const TColStd_ListOfInteger &	theVertIndices,
		const Standard_Boolean	theAddInterfs = `1`
	)

protected

◆ MakeSDVerticesFF()

void BOPAlgo_PaveFiller::MakeSDVerticesFF	(	const TColStd_DataMapOfIntegerListOfInteger &	aDMVLV,
		TColStd_DataMapOfIntegerInteger &	theDMNewSD
	)

protected

◆ MakeSplitEdge()

void BOPAlgo_PaveFiller::MakeSplitEdge	(	const Standard_Integer	theV,
		const Standard_Integer	theF
	)

protected

◆ MakeSplitEdges()

void BOPAlgo_PaveFiller::MakeSplitEdges ( const Message_ProgressRange & theRange )

protected

◆ NonDestructive()

Standard_Boolean BOPAlgo_PaveFiller::NonDestructive ( ) const

Returns the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated.

◆ PDS()

BOPDS_PDS BOPAlgo_PaveFiller::PDS ( )

◆ Perform()

virtual void BOPAlgo_PaveFiller::Perform ( const Message_ProgressRange & theRange = Message_ProgressRange() )

overridevirtual

The main method to implement the operation Providing the range allows to enable Progress indicator User break functionalities.

Implements BOPAlgo_Algo.

Reimplemented in BOPAlgo_CheckerSI.

◆ PerformEE()

virtual void BOPAlgo_PaveFiller::PerformEE ( const Message_ProgressRange & theRange )

protectedvirtual

◆ PerformEF()

virtual void BOPAlgo_PaveFiller::PerformEF ( const Message_ProgressRange & theRange )

protectedvirtual

◆ PerformFF()

virtual void BOPAlgo_PaveFiller::PerformFF ( const Message_ProgressRange & theRange )

protectedvirtual

◆ PerformInternal()

virtual void BOPAlgo_PaveFiller::PerformInternal ( const Message_ProgressRange & theRange )

protectedvirtual

◆ PerformNewVertices()

void BOPAlgo_PaveFiller::PerformNewVertices	(	BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &	theMVCPB,
		const Handle< NCollection_BaseAllocator > &	theAllocator,
		const Message_ProgressRange &	theRange,
		const Standard_Boolean	theIsEEIntersection = `Standard_True`
	)

protected

Performs intersection of new vertices, obtained in E/E and E/F intersections.

◆ PerformVE()

virtual void BOPAlgo_PaveFiller::PerformVE ( const Message_ProgressRange & theRange )

protectedvirtual

◆ PerformVF()

virtual void BOPAlgo_PaveFiller::PerformVF ( const Message_ProgressRange & theRange )

protectedvirtual

◆ PerformVV()

virtual void BOPAlgo_PaveFiller::PerformVV ( const Message_ProgressRange & theRange )

protectedvirtual

◆ PostTreatFF()

void BOPAlgo_PaveFiller::PostTreatFF	(	BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &	theMSCPB,
		BOPDS_DataMapOfPaveBlockListOfPaveBlock &	theDMExEdges,
		TColStd_DataMapOfIntegerInteger &	theDMNewSD,
		const BOPDS_IndexedMapOfPaveBlock &	theMicroPB,
		const TopTools_IndexedMapOfShape &	theVertsOnRejectedPB,
		const Handle< NCollection_BaseAllocator > &	theAllocator,
		const Message_ProgressRange &	theRange
	)

protected

Treatment of section edges.

◆ Prepare()

void BOPAlgo_PaveFiller::Prepare ( const Message_ProgressRange & theRange )

protected

◆ PreparePostTreatFF()

void BOPAlgo_PaveFiller::PreparePostTreatFF	(	const Standard_Integer	aInt,
		const Standard_Integer	aCur,
		const Handle< BOPDS_PaveBlock > &	aPB,
		BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &	aMSCPB,
		TopTools_DataMapOfShapeInteger &	aMVI,
		BOPDS_ListOfPaveBlock &	aLPB
	)

protected

Keeps data for post treatment.

◆ ProcessDE()

void BOPAlgo_PaveFiller::ProcessDE ( const Message_ProgressRange & theRange )

protected

◆ ProcessExistingPaveBlocks() [1/2]

void BOPAlgo_PaveFiller::ProcessExistingPaveBlocks	(	const Standard_Integer	theInt,
		const Standard_Integer	theCur,
		const Standard_Integer	nF1,
		const Standard_Integer	nF2,
		const TopoDS_Edge &	theES,
		const BOPDS_IndexedMapOfPaveBlock &	theMPBOnIn,
		BOPTools_BoxTree &	thePBTree,
		BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &	theMSCPB,
		TopTools_DataMapOfShapeInteger &	theMVI,
		BOPDS_ListOfPaveBlock &	theLPBC,
		BOPAlgo_DataMapOfPaveBlockListOfInteger &	thePBFacesMap,
		BOPDS_MapOfPaveBlock &	theMPB
	)

protected

Adds the existing edges for intersection with section edges by checking the possible intersection with the faces comparing pre-saved E-F distances with new tolerances.

◆ ProcessExistingPaveBlocks() [2/2]

void BOPAlgo_PaveFiller::ProcessExistingPaveBlocks	(	const Standard_Integer	theInt,
		const Standard_Integer	nF1,
		const Standard_Integer	nF2,
		const BOPDS_IndexedMapOfPaveBlock &	theMPBOnIn,
		BOPTools_BoxTree &	thePBTree,
		const TColStd_DataMapOfIntegerListOfInteger &	theDMBV,
		BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &	theMSCPB,
		TopTools_DataMapOfShapeInteger &	theMVI,
		BOPAlgo_DataMapOfPaveBlockListOfInteger &	thePBFacesMap,
		BOPDS_MapOfPaveBlock &	theMPB
	)

protected

Adds the existing edges from the map <theMPBOnIn> which interfere with the vertices from <theMVB> map to the post treatment of section edges.

◆ PutBoundPaveOnCurve()

void BOPAlgo_PaveFiller::PutBoundPaveOnCurve	(	const TopoDS_Face &	theF1,
		const TopoDS_Face &	theF2,
		BOPDS_Curve &	theNC,
		TColStd_ListOfInteger &	theLBV
	)

protected

◆ PutClosingPaveOnCurve()

void BOPAlgo_PaveFiller::PutClosingPaveOnCurve ( BOPDS_Curve & aNC )

protected

Put paves on the curve <aBC> in case when <aBC> is closed 3D-curve.

◆ PutEFPavesOnCurve()

void BOPAlgo_PaveFiller::PutEFPavesOnCurve	(	const BOPDS_VectorOfCurve &	theVC,
		const Standard_Integer	theIndex,
		const TColStd_MapOfInteger &	theMI,
		const TColStd_MapOfInteger &	theMVEF,
		TColStd_DataMapOfIntegerReal &	theMVTol,
		TColStd_DataMapOfIntegerListOfInteger &	aDMVLV
	)

protected

Checks and puts paves created in EF intersections on the curve <theNC>.

◆ PutPaveOnCurve()

void BOPAlgo_PaveFiller::PutPaveOnCurve	(	const Standard_Integer	nV,
		const Standard_Real	theTolR3D,
		const BOPDS_Curve &	theNC,
		const TColStd_MapOfInteger &	theMI,
		TColStd_DataMapOfIntegerReal &	theMVTol,
		TColStd_DataMapOfIntegerListOfInteger &	aDMVLV,
		const Standard_Integer	aType = `0`
	)

protected

Puts the pave nV on the curve theNC. Parameter aType defines whether to check the pave with extended tolerance: 0 - do not perform the check; other - perform the check (aType goes to ExtendedTolerance).

◆ PutPavesOnCurve()

void BOPAlgo_PaveFiller::PutPavesOnCurve	(	const TColStd_MapOfInteger &	theMVOnIn,
		const TColStd_MapOfInteger &	theMVCommon,
		BOPDS_Curve &	theNC,
		const TColStd_MapOfInteger &	theMI,
		const TColStd_MapOfInteger &	theMVEF,
		TColStd_DataMapOfIntegerReal &	theMVTol,
		TColStd_DataMapOfIntegerListOfInteger &	theDMVLV
	)

protected

Checks and puts paves from <theMVOnIn> on the curve <theNC>. At that, common (from theMVCommon) and not common vertices are processed differently.

◆ PutSEInOtherFaces()

void BOPAlgo_PaveFiller::PutSEInOtherFaces ( const Message_ProgressRange & theRange )

protected

Treatment of the possible common zones, not detected by the Face/Face intersection algorithm, by intersection of each section edge with all faces not participated in creation of that section edge. If the intersection says that the section edge is lying on the face it will be added into FaceInfo structure of the face as IN edge and will be used for splitting.

◆ PutStickPavesOnCurve()

void BOPAlgo_PaveFiller::PutStickPavesOnCurve	(	const TopoDS_Face &	aF1,
		const TopoDS_Face &	aF2,
		const TColStd_MapOfInteger &	theMI,
		const BOPDS_VectorOfCurve &	theVC,
		const Standard_Integer	theIndex,
		const TColStd_MapOfInteger &	theMVStick,
		TColStd_DataMapOfIntegerReal &	theMVTol,
		TColStd_DataMapOfIntegerListOfInteger &	aDMVLV
	)

protected

Puts stick paves on the curve <theNC>

◆ ReduceIntersectionRange()

void BOPAlgo_PaveFiller::ReduceIntersectionRange	(	const Standard_Integer	theV1,
		const Standard_Integer	theV2,
		const Standard_Integer	theE,
		const Standard_Integer	theF,
		Standard_Real &	theTS1,
		Standard_Real &	theTS2
	)

protected

Reduce the intersection range using the common ranges of Edge/Edge interferences to avoid creation of close intersection vertices.

◆ RemoveMicroEdges()

void BOPAlgo_PaveFiller::RemoveMicroEdges ( )

protected

Check all edges on the micro status and remove the positive ones.

◆ RemoveMicroSectionEdges()

void BOPAlgo_PaveFiller::RemoveMicroSectionEdges	(	BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &	theMSCPB,
		BOPDS_IndexedMapOfPaveBlock &	theMicroPB
	)

protected

When all section edges are created and no increase of the tolerance of vertices put on the section edges is expected, make sure that the created sections have valid range. If any of the section edges do not have valid range, remove them from Face/Face intersection info and from the input <theMSCPB> map. Put such edges into <MicroPB> map for further unification of their vertices in the PostTreatFF method.

All these section edges have already been checked to have valid range. Current check is necessary for the edges whose vertices have also been put on other section edges with greater tolerance, which has caused increase of the tolerance value of the vertices.

◆ RemovePaveBlocks()

void BOPAlgo_PaveFiller::RemovePaveBlocks ( const TColStd_MapOfInteger & theEdges )

protected

◆ RemoveUsedVertices()

void BOPAlgo_PaveFiller::RemoveUsedVertices	(	const BOPDS_VectorOfCurve &	theVC,
		TColStd_MapOfInteger &	theMV
	)

protected

Removes indices of vertices that are already on the curve <theNC> from the map <theMV>. It is used in PutEFPavesOnCurve and PutStickPavesOnCurve methods.

◆ RepeatIntersection()

void BOPAlgo_PaveFiller::RepeatIntersection ( const Message_ProgressRange & theRange )

protected

Repeat intersection of sub-shapes with increased vertices.

◆ SetArguments()

void BOPAlgo_PaveFiller::SetArguments ( const TopTools_ListOfShape & theLS )

inline

Sets the arguments for operation.

◆ SetAvoidBuildPCurve()

void BOPAlgo_PaveFiller::SetAvoidBuildPCurve ( const Standard_Boolean theValue )

inline

Sets the flag to avoid building of p-curves of edges on faces.

◆ SetGlue()

void BOPAlgo_PaveFiller::SetGlue ( const BOPAlgo_GlueEnum theGlue )

Sets the glue option for the algorithm.

◆ SetIsPrimary()

void BOPAlgo_PaveFiller::SetIsPrimary ( const Standard_Boolean theFlag )

protected

◆ SetNonDestructive() [1/2]

void BOPAlgo_PaveFiller::SetNonDestructive ( const Standard_Boolean theFlag )

Sets the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated.

◆ SetNonDestructive() [2/2]

void BOPAlgo_PaveFiller::SetNonDestructive ( )

protected

Sets non-destructive mode automatically if an argument contains a locked sub-shape (see TopoDS_Shape::Locked()).

◆ SetSectionAttribute()

void BOPAlgo_PaveFiller::SetSectionAttribute ( const BOPAlgo_SectionAttribute & theSecAttr )

◆ SplitEdge()

Standard_Integer BOPAlgo_PaveFiller::SplitEdge	(	const Standard_Integer	nE,
		const Standard_Integer	nV1,
		const Standard_Real	aT1,
		const Standard_Integer	nV2,
		const Standard_Real	aT2
	)

protected

Creates new edge from the edge nE with vertices nV1 and nV2 and returns the index of that new edge in the DS.

◆ SplitPaveBlocks()

void BOPAlgo_PaveFiller::SplitPaveBlocks	(	const TColStd_MapOfInteger &	theMEdges,
		const Standard_Boolean	theAddInterfs
	)

protected

Splits the Pave Blocks of the given edges with the extra paves.
The method also builds the shrunk data for the new pave blocks and in case there is no valid range on the pave block, the vertices of this pave block will be united making SD vertex.
Parameter <theAddInterfs> defines whether this interference will be added into common table of interferences or not.
If some of the Pave Blocks are forming the Common Blocks, the splits of the Pave Blocks will also form a Common Block.

◆ TreatNewVertices()

void BOPAlgo_PaveFiller::TreatNewVertices	(	const BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks &	theMVCPB,
		TopTools_IndexedDataMapOfShapeListOfShape &	theImages
	)

protected

Treatment of vertices that were created in EE intersections.

◆ TreatVerticesEE()

void BOPAlgo_PaveFiller::TreatVerticesEE ( )

protected

◆ UpdateBlocksWithSharedVertices()

void BOPAlgo_PaveFiller::UpdateBlocksWithSharedVertices ( )

protected

◆ UpdateCommonBlocksWithSDVertices()

void BOPAlgo_PaveFiller::UpdateCommonBlocksWithSDVertices ( )

protected

◆ UpdateEdgeTolerance()

void BOPAlgo_PaveFiller::UpdateEdgeTolerance	(	const Standard_Integer	nE,
		const Standard_Real	aTolNew
	)

protected

◆ UpdateExistingPaveBlocks()

void BOPAlgo_PaveFiller::UpdateExistingPaveBlocks	(	const Handle< BOPDS_PaveBlock > &	thePB,
		BOPDS_ListOfPaveBlock &	theLPB,
		const BOPAlgo_DataMapOfPaveBlockListOfInteger &	thePBFacesMap
	)

protected

Replaces existing pave block <thePB> with new pave blocks <theLPB>. The list <theLPB> contains images of <thePB> which were created in the post treatment of section edges. Tries to project the new edges on the faces contained in the <thePBFacesMap>.

◆ UpdateFaceInfo()

void BOPAlgo_PaveFiller::UpdateFaceInfo	(	BOPDS_DataMapOfPaveBlockListOfPaveBlock &	theDME,
		const TColStd_DataMapOfIntegerInteger &	theDMV,
		const BOPAlgo_DataMapOfPaveBlockListOfInteger &	thePBFacesMap
	)

protected

Updates the information about faces.

◆ UpdateInterfsWithSDVertices()

void BOPAlgo_PaveFiller::UpdateInterfsWithSDVertices ( )

protected

◆ UpdatePaveBlocks()

void BOPAlgo_PaveFiller::UpdatePaveBlocks ( const TColStd_DataMapOfIntegerInteger & aDMNewSD )

protected

Updates pave blocks which have the paves with indices contained in the map <aDMNewSD>.

◆ UpdatePaveBlocksWithSDVertices()

void BOPAlgo_PaveFiller::UpdatePaveBlocksWithSDVertices ( )

protected

◆ UpdateVertex()

Standard_Integer BOPAlgo_PaveFiller::UpdateVertex	(	const Standard_Integer	nV,
		const Standard_Real	aTolNew
	)

protected

Updates tolerance vertex nV due to V/E interference. It always creates new vertex if nV is from arguments.

Returns: DS index of updated vertex.

◆ UpdateVerticesOfCB()

void BOPAlgo_PaveFiller::UpdateVerticesOfCB ( )

protected

Updates vertices of CommonBlocks with real tolerance of CB.

Field Documentation

◆ myArguments

TopTools_ListOfShape BOPAlgo_PaveFiller::myArguments

protected

Fields.

◆ myAvoidBuildPCurve

Standard_Boolean BOPAlgo_PaveFiller::myAvoidBuildPCurve

protected

◆ myContext

Handle< IntTools_Context > BOPAlgo_PaveFiller::myContext

protected

◆ myDistances

NCollection_DataMap<BOPDS_Pair, NCollection_List<EdgeRangeDistance>, BOPDS_PairMapHasher> BOPAlgo_PaveFiller::myDistances

protected

Map to store minimal distances between shapes which have no real intersections.

◆ myDS

BOPDS_PDS BOPAlgo_PaveFiller::myDS

protected

◆ myFPBDone

BOPAlgo_DataMapOfIntegerMapOfPaveBlock BOPAlgo_PaveFiller::myFPBDone

protected

Fence map of intersected faces and pave blocks.

◆ myGlue

BOPAlgo_GlueEnum BOPAlgo_PaveFiller::myGlue

protected

◆ myIncreasedSS

TColStd_MapOfInteger BOPAlgo_PaveFiller::myIncreasedSS

protected

Sub-shapes with increased tolerance during the operation.

◆ myIsPrimary

Standard_Boolean BOPAlgo_PaveFiller::myIsPrimary

protected

◆ myIterator

BOPDS_PIterator BOPAlgo_PaveFiller::myIterator

protected

◆ myNonDestructive

Standard_Boolean BOPAlgo_PaveFiller::myNonDestructive

protected

◆ mySectionAttribute

BOPAlgo_SectionAttribute BOPAlgo_PaveFiller::mySectionAttribute

protected

◆ myVertsToAvoidExtension

TColStd_MapOfInteger BOPAlgo_PaveFiller::myVertsToAvoidExtension

protected

Vertices located close to E/E or E/F intersection points which has already been extended to cover the real intersection points, and should not be extended any longer to be put on a section curve.

The documentation for this class was generated from the following file:

BOPAlgo_PaveFiller.hxx

Data Structures

Public Member Functions

Protected Types

Protected Member Functions

Static Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Member Typedef Documentation

◆ BOPAlgo_DataMapOfIntegerMapOfPaveBlock

◆ BOPAlgo_DataMapOfPaveBlockBndBox

◆ BOPAlgo_DataMapOfPaveBlockListOfInteger

Constructor & Destructor Documentation

◆ BOPAlgo_PaveFiller() [1/2]

◆ ~BOPAlgo_PaveFiller()

◆ BOPAlgo_PaveFiller() [2/2]

Member Function Documentation

◆ AddArgument()

◆ AddIntersectionFailedWarning()

◆ AnalyzeShrunkData()

◆ Arguments()

◆ CheckFacePaves() [1/2]

◆ CheckFacePaves() [2/2]

◆ CheckPlanes()

◆ CheckSelfInterference()

◆ Clear()

◆ Context()

◆ CorrectToleranceOfSE()

◆ DS()

◆ EstimatePaveOnCurve()

◆ ExtendedTolerance()

◆ FillPaves()

◆ fillPIConstants()

◆ fillPISteps()

◆ FillShrunkData() [1/2]

◆ FillShrunkData() [2/2]

◆ FilterPavesOnCurves()

◆ FindPaveBlocks()

◆ ForceInterfEE()

◆ ForceInterfEF() [1/2]

◆ ForceInterfEF() [2/2]

◆ ForceInterfVE()

◆ ForceInterfVF()

◆ GetEFPnts()

◆ GetFullShapeMap()

◆ GetPBBox()

◆ GetStickVertices()

◆ Glue()

◆ Init()

◆ IntersectVE()

◆ IsAvoidBuildPCurve()

◆ IsExistingPaveBlock() [1/2]

◆ IsExistingPaveBlock() [2/2]

◆ IsExistingVertex()

◆ IsPrimary()

◆ Iterator()

◆ MakeBlocks()

◆ MakePCurves()

◆ MakeSDVertices()

◆ MakeSDVerticesFF()

◆ MakeSplitEdge()

◆ MakeSplitEdges()

◆ NonDestructive()

◆ PDS()

◆ Perform()

◆ PerformEE()

◆ PerformEF()

◆ PerformFF()

◆ PerformInternal()

◆ PerformNewVertices()

◆ PerformVE()

◆ PerformVF()

◆ PerformVV()

◆ PostTreatFF()

◆ Prepare()

◆ PreparePostTreatFF()

◆ ProcessDE()

◆ ProcessExistingPaveBlocks() [1/2]

◆ ProcessExistingPaveBlocks() [2/2]

◆ PutBoundPaveOnCurve()