BRepBuilderAPI_MakeEdge Class Reference

Provides methods to build edges. More...

#include <BRepBuilderAPI_MakeEdge.hxx>

Inheritance diagram for BRepBuilderAPI_MakeEdge:

Public Member Functions
	BRepBuilderAPI_MakeEdge ()
	BRepBuilderAPI_MakeEdge (const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepBuilderAPI_MakeEdge (const gp_Pnt &P1, const gp_Pnt &P2)
	BRepBuilderAPI_MakeEdge (const gp_Lin &L)
	BRepBuilderAPI_MakeEdge (const gp_Lin &L, const Standard_Real p1, const Standard_Real p2)
	BRepBuilderAPI_MakeEdge (const gp_Lin &L, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepBuilderAPI_MakeEdge (const gp_Lin &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepBuilderAPI_MakeEdge (const gp_Circ &L)
	BRepBuilderAPI_MakeEdge (const gp_Circ &L, const Standard_Real p1, const Standard_Real p2)
	BRepBuilderAPI_MakeEdge (const gp_Circ &L, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepBuilderAPI_MakeEdge (const gp_Circ &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepBuilderAPI_MakeEdge (const gp_Elips &L)
	BRepBuilderAPI_MakeEdge (const gp_Elips &L, const Standard_Real p1, const Standard_Real p2)
	BRepBuilderAPI_MakeEdge (const gp_Elips &L, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepBuilderAPI_MakeEdge (const gp_Elips &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepBuilderAPI_MakeEdge (const gp_Hypr &L)
	BRepBuilderAPI_MakeEdge (const gp_Hypr &L, const Standard_Real p1, const Standard_Real p2)
	BRepBuilderAPI_MakeEdge (const gp_Hypr &L, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepBuilderAPI_MakeEdge (const gp_Hypr &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepBuilderAPI_MakeEdge (const gp_Parab &L)
	BRepBuilderAPI_MakeEdge (const gp_Parab &L, const Standard_Real p1, const Standard_Real p2)
	BRepBuilderAPI_MakeEdge (const gp_Parab &L, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepBuilderAPI_MakeEdge (const gp_Parab &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepBuilderAPI_MakeEdge (const Handle< Geom_Curve > &L)
	BRepBuilderAPI_MakeEdge (const Handle< Geom_Curve > &L, const Standard_Real p1, const Standard_Real p2)
	BRepBuilderAPI_MakeEdge (const Handle< Geom_Curve > &L, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepBuilderAPI_MakeEdge (const Handle< Geom_Curve > &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepBuilderAPI_MakeEdge (const Handle< Geom_Curve > &L, const gp_Pnt &P1, const gp_Pnt &P2, const Standard_Real p1, const Standard_Real p2)
	BRepBuilderAPI_MakeEdge (const Handle< Geom_Curve > &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2, const Standard_Real p1, const Standard_Real p2)
	BRepBuilderAPI_MakeEdge (const Handle< Geom2d_Curve > &L, const Handle< Geom_Surface > &S)
	BRepBuilderAPI_MakeEdge (const Handle< Geom2d_Curve > &L, const Handle< Geom_Surface > &S, const Standard_Real p1, const Standard_Real p2)
	BRepBuilderAPI_MakeEdge (const Handle< Geom2d_Curve > &L, const Handle< Geom_Surface > &S, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepBuilderAPI_MakeEdge (const Handle< Geom2d_Curve > &L, const Handle< Geom_Surface > &S, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepBuilderAPI_MakeEdge (const Handle< Geom2d_Curve > &L, const Handle< Geom_Surface > &S, const gp_Pnt &P1, const gp_Pnt &P2, const Standard_Real p1, const Standard_Real p2)
	BRepBuilderAPI_MakeEdge (const Handle< Geom2d_Curve > &L, const Handle< Geom_Surface > &S, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2, const Standard_Real p1, const Standard_Real p2)
	The general method to directly create an edge is to give. More...
void	Init (const Handle< Geom_Curve > &C)
void	Init (const Handle< Geom_Curve > &C, const Standard_Real p1, const Standard_Real p2)
void	Init (const Handle< Geom_Curve > &C, const gp_Pnt &P1, const gp_Pnt &P2)
void	Init (const Handle< Geom_Curve > &C, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
void	Init (const Handle< Geom_Curve > &C, const gp_Pnt &P1, const gp_Pnt &P2, const Standard_Real p1, const Standard_Real p2)
void	Init (const Handle< Geom_Curve > &C, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2, const Standard_Real p1, const Standard_Real p2)
void	Init (const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S)
void	Init (const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S, const Standard_Real p1, const Standard_Real p2)
void	Init (const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S, const gp_Pnt &P1, const gp_Pnt &P2)
void	Init (const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
void	Init (const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S, const gp_Pnt &P1, const gp_Pnt &P2, const Standard_Real p1, const Standard_Real p2)
void	Init (const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2, const Standard_Real p1, const Standard_Real p2)
	Defines or redefines the arguments for the construction of an edge. This function is currently used after the empty constructor BRepAPI_MakeEdge(). More...
virtual Standard_Boolean	IsDone () const override
	Returns true if the edge is built. More...
BRepBuilderAPI_EdgeError	Error () const
	Returns the construction status. More...
const TopoDS_Edge &	Edge ()
	Returns the constructed edge. Exceptions StdFail_NotDone if the edge is not built. More...
	operator TopoDS_Edge ()
const TopoDS_Vertex &	Vertex1 () const
	Returns the first vertex of the edge. May be Null. More...
const TopoDS_Vertex &	Vertex2 () const
	Returns the second vertex of the edge. May be Null. More...
Public Member Functions inherited from BRepBuilderAPI_MakeShape
virtual void	Build (const Message_ProgressRange &theRange=Message_ProgressRange())
	This is called by Shape(). It does nothing but may be redefined. More...
virtual const TopoDS_Shape &	Shape ()
	Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built. More...
	operator TopoDS_Shape ()
virtual const TopTools_ListOfShape &	Generated (const TopoDS_Shape &S)
	Returns the list of shapes generated from the shape <S>. More...
virtual const TopTools_ListOfShape &	Modified (const TopoDS_Shape &S)
	Returns the list of shapes modified from the shape <S>. More...
virtual Standard_Boolean	IsDeleted (const TopoDS_Shape &S)
	Returns true if the shape S has been deleted. More...
Public Member Functions inherited from BRepBuilderAPI_Command
virtual	~BRepBuilderAPI_Command ()
void	Check () const
	Raises NotDone if done is false. More...

Additional Inherited Members
Protected Member Functions inherited from BRepBuilderAPI_MakeShape
	BRepBuilderAPI_MakeShape ()
Protected Member Functions inherited from BRepBuilderAPI_Command
	BRepBuilderAPI_Command ()
	Set done to False. More...
void	Done ()
	Set done to true. More...
void	NotDone ()
	Set done to false. More...
Protected Attributes inherited from BRepBuilderAPI_MakeShape
TopoDS_Shape	myShape
TopTools_ListOfShape	myGenerated

Detailed Description

Provides methods to build edges.

The methods have the following syntax, where TheCurve is one of Lin, Circ, ...

Create(C : TheCurve)

Makes an edge on the whole curve. Add vertices on finite curves.

Create(C : TheCurve; p1,p2 : Real)

Make an edge on the curve between parameters p1 and p2. if p2 < p1 the edge will be REVERSED. If p1 or p2 is infinite the curve will be open in that direction. Vertices are created for finite values of p1 and p2.

Create(C : TheCurve; P1, P2 : Pnt from gp)

Make an edge on the curve between the points P1 and P2. The points are projected on the curve and the previous method is used. An error is raised if the points are not on the curve.

Create(C : TheCurve; V1, V2 : Vertex from TopoDS)

Make an edge on the curve between the vertices V1 and V2. Same as the previous but no vertices are created. If a vertex is Null the curve will be open in this direction.

Constructor & Destructor Documentation

BRepBuilderAPI_MakeEdge() [1/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge

(

)

BRepBuilderAPI_MakeEdge() [2/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepBuilderAPI_MakeEdge() [3/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepBuilderAPI_MakeEdge() [4/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge

(

const gp_Lin &

L

)

BRepBuilderAPI_MakeEdge() [5/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Lin &	L,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepBuilderAPI_MakeEdge() [6/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Lin &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepBuilderAPI_MakeEdge() [7/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Lin &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepBuilderAPI_MakeEdge() [8/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge

(

const gp_Circ &

L

)

BRepBuilderAPI_MakeEdge() [9/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Circ &	L,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepBuilderAPI_MakeEdge() [10/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Circ &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepBuilderAPI_MakeEdge() [11/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Circ &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepBuilderAPI_MakeEdge() [12/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge

(

const gp_Elips &

L

)

BRepBuilderAPI_MakeEdge() [13/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Elips &	L,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepBuilderAPI_MakeEdge() [14/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Elips &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepBuilderAPI_MakeEdge() [15/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Elips &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepBuilderAPI_MakeEdge() [16/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge

(

const gp_Hypr &

L

)

BRepBuilderAPI_MakeEdge() [17/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Hypr &	L,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepBuilderAPI_MakeEdge() [18/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Hypr &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepBuilderAPI_MakeEdge() [19/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Hypr &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepBuilderAPI_MakeEdge() [20/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge

(

const gp_Parab &

L

)

BRepBuilderAPI_MakeEdge() [21/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Parab &	L,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepBuilderAPI_MakeEdge() [22/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Parab &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepBuilderAPI_MakeEdge() [23/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const gp_Parab &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepBuilderAPI_MakeEdge() [24/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge

(

const Handle< Geom_Curve > &

L

)

BRepBuilderAPI_MakeEdge() [25/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const Handle< Geom_Curve > &	L,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepBuilderAPI_MakeEdge() [26/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const Handle< Geom_Curve > &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepBuilderAPI_MakeEdge() [27/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const Handle< Geom_Curve > &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepBuilderAPI_MakeEdge() [28/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const Handle< Geom_Curve > &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepBuilderAPI_MakeEdge() [29/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const Handle< Geom_Curve > &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepBuilderAPI_MakeEdge() [30/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const Handle< Geom2d_Curve > &	L,
		const Handle< Geom_Surface > &	S
	)

BRepBuilderAPI_MakeEdge() [31/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const Handle< Geom2d_Curve > &	L,
		const Handle< Geom_Surface > &	S,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepBuilderAPI_MakeEdge() [32/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const Handle< Geom2d_Curve > &	L,
		const Handle< Geom_Surface > &	S,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepBuilderAPI_MakeEdge() [33/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const Handle< Geom2d_Curve > &	L,
		const Handle< Geom_Surface > &	S,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepBuilderAPI_MakeEdge() [34/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const Handle< Geom2d_Curve > &	L,
		const Handle< Geom_Surface > &	S,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepBuilderAPI_MakeEdge() [35/35]

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge	(	const Handle< Geom2d_Curve > &	L,
		const Handle< Geom_Surface > &	S,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

The general method to directly create an edge is to give.

• a 3D curve C as the support (geometric domain) of the edge,
• two vertices V1 and V2 to limit the curve (definition of the restriction of the edge), and
• two real values p1 and p2 which are the parameters for the vertices V1 and V2 on the curve. The curve may be defined as a 2d curve in the parametric space of a surface: a pcurve. The surface on which the edge is built is then kept at the level of the edge. The default tolerance will be associated with this edge. Rules applied to the arguments: For the curve:
• The curve must not be a 'null handle'.
• If the curve is a trimmed curve the basis curve is used. For the vertices:
• Vertices may be null shapes. When V1 or V2 is null the edge is open in the corresponding direction and the parameter value p1 or p2 must be infinite (remember that Precision::Infinite() defines an infinite value).
• The two vertices must be identical if they have the same 3D location. Identical vertices are used in particular when the curve is closed. For the parameters:
• The parameters must be in the parametric range of the curve (or the basis curve if the curve is trimmed). If this condition is not satisfied the edge is not built, and the Error function will return BRepAPI_ParameterOutOfRange.
• Parameter values must not be equal. If this condition is not satisfied (i.e. if | p1 - p2 | ) the edge is not built, and the Error function will return BRepAPI_LineThroughIdenticPoints. Parameter values are expected to be given in increasing order: C->FirstParameter()
• If the parameter values are given in decreasing order the vertices are switched, i.e. the "first vertex" is on the point of parameter p2 and the "second vertex" is on the point of parameter p1. In such a case, to keep the original intent of the construction, the edge will be oriented "reversed".
• On a periodic curve the parameter values p1 and p2 are adjusted by adding or subtracting the period to obtain p1 in the parametric range of the curve, and p2] such that [ p1 , where Period is the period of the curve.
• A parameter value may be infinite. The edge is open in the corresponding direction. However the corresponding vertex must be a null shape. If this condition is not satisfied the edge is not built, and the Error function will return BRepAPI_PointWithInfiniteParameter.
• The distance between the vertex and the point evaluated on the curve with the parameter, must be lower than the precision of the vertex. If this condition is not satisfied the edge is not built, and the Error function will return BRepAPI_DifferentsPointAndParameter. Other edge constructions
• The parameter values can be omitted, they will be computed by projecting the vertices on the curve. Note that projection is the only way to evaluate the parameter values of the vertices on the curve: vertices must be given on the curve, i.e. the distance from a vertex to the curve must be less than or equal to the precision of the vertex. If this condition is not satisfied the edge is not built, and the Error function will return BRepAPI_PointProjectionFailed.
• 3D points can be given in place of vertices. Vertices will be created from the points (with the default topological precision Precision::Confusion()). Note:
• Giving vertices is useful when creating a connected edge.
• If the parameter values correspond to the extremities of a closed curve, points must be identical, or at least coincident. If this condition is not satisfied the edge is not built, and the Error function will return BRepAPI_DifferentPointsOnClosedCurve.
• The vertices or points can be omitted if the parameter values are given. The points will be computed from the parameters on the curve. The vertices or points and the parameter values can be omitted. The first and last parameters of the curve will then be used.

Auxiliary methods

Member Function Documentation

Edge()

const TopoDS_Edge& BRepBuilderAPI_MakeEdge::Edge

(

)

Returns the constructed edge. Exceptions StdFail_NotDone if the edge is not built.

Error()

BRepBuilderAPI_EdgeError BRepBuilderAPI_MakeEdge::Error

(

)

const

Returns the construction status.

• BRepBuilderAPI_EdgeDone if the edge is built, or
• another value of the BRepBuilderAPI_EdgeError enumeration indicating the reason of construction failure.

Init() [1/12]

void BRepBuilderAPI_MakeEdge::Init

(

const Handle< Geom_Curve > &

C

)

Init() [2/12]

void BRepBuilderAPI_MakeEdge::Init	(	const Handle< Geom_Curve > &	C,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

Init() [3/12]

void BRepBuilderAPI_MakeEdge::Init	(	const Handle< Geom_Curve > &	C,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

Init() [4/12]

void BRepBuilderAPI_MakeEdge::Init	(	const Handle< Geom_Curve > &	C,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

Init() [5/12]

void BRepBuilderAPI_MakeEdge::Init	(	const Handle< Geom_Curve > &	C,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

Init() [6/12]

void BRepBuilderAPI_MakeEdge::Init	(	const Handle< Geom_Curve > &	C,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

Init() [7/12]

void BRepBuilderAPI_MakeEdge::Init	(	const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S
	)

Init() [8/12]

void BRepBuilderAPI_MakeEdge::Init	(	const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

Init() [9/12]

void BRepBuilderAPI_MakeEdge::Init	(	const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

Init() [10/12]

void BRepBuilderAPI_MakeEdge::Init	(	const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

Init() [11/12]

void BRepBuilderAPI_MakeEdge::Init	(	const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

Init() [12/12]

void BRepBuilderAPI_MakeEdge::Init	(	const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

Defines or redefines the arguments for the construction of an edge. This function is currently used after the empty constructor BRepAPI_MakeEdge().

IsDone()

virtual Standard_Boolean BRepBuilderAPI_MakeEdge::IsDone ( ) const

overridevirtual

Returns true if the edge is built.

Reimplemented from BRepBuilderAPI_Command.

operator TopoDS_Edge()

BRepBuilderAPI_MakeEdge::operator TopoDS_Edge

(

)

Vertex1()

const TopoDS_Vertex& BRepBuilderAPI_MakeEdge::Vertex1

(

)

const

Returns the first vertex of the edge. May be Null.

Vertex2()

const TopoDS_Vertex& BRepBuilderAPI_MakeEdge::Vertex2

(

)

const

Returns the second vertex of the edge. May be Null.

Warning The returned vertex in each function corresponds respectively to

• the lowest, or
• the highest parameter on the curve along which the edge is built. It does not correspond to the first or second vertex given at the time of the construction, if the edge is oriented reversed. Exceptions StdFail_NotDone if the edge is not built.

---

The documentation for this class was generated from the following file:

• BRepBuilderAPI_MakeEdge.hxx