Provides functions to build mechanical features. Mechanical features include ribs - protrusions and grooves (or slots) - depressions along planar (linear) surfaces or revolution surfaces. The semantics of mechanical features is built around giving thickness to a contour. This thickness can either be unilateral - on one side of the contour - or bilateral - on both sides. As in the semantics of form features, the thickness is defined by construction of shapes in specific contexts. The development contexts differ, however,in case of mechanical features. Here they include extrusion: More...

#include <BRepFeat_RibSlot.hxx>

Inheritance diagram for BRepFeat_RibSlot:

[legend]

Public Member Functions
virtual Standard_Boolean	IsDeleted (const TopoDS_Shape &F) override
	Returns true if F a TopoDS_Shape of type edge or face has been deleted. More...

virtual const TopTools_ListOfShape &	Modified (const TopoDS_Shape &F) override
	Returns the list of generated Faces F. This list may be empty. More...

virtual const TopTools_ListOfShape &	Generated (const TopoDS_Shape &S) override
	Returns a list TopTools_ListOfShape of the faces S created in the shape. More...

const TopTools_ListOfShape &	FirstShape () const
	Returns the list of shapes created at the bottom of the created form. It may be an empty list. More...

const TopTools_ListOfShape &	LastShape () const
	Returns the list of shapes created at the top of the created form. It may be an empty list. More...

const TopTools_ListOfShape &	FacesForDraft () const
	Returns a list of the limiting and glueing faces generated by the feature. These faces did not originally exist in the basis shape. The list provides the information necessary for subsequent addition of a draft to a face. It may be an empty list. If a face has tangent edges, no draft is possible, and the tangent edges must subsequently be removed if you want to add a draft to the face. More...

const TopTools_ListOfShape &	NewEdges () const
	Returns a list of the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape. The list provides the information necessary for subsequent addition of fillets. It may be an empty list. More...

const TopTools_ListOfShape &	TgtEdges () const
	Returns a list of the tangent edges among the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape and are tangent to the face against which the feature is built. The list provides the information necessary for subsequent addition of fillets. It may be an empty list. If an edge is tangent, no fillet is possible, and the edge must subsequently be removed if you want to add a fillet. More...

BRepFeat_StatusError	CurrentStatusError () const

Public Member Functions inherited from BRepBuilderAPI_MakeShape
virtual void	Build (const Message_ProgressRange &theRange=Message_ProgressRange())
	This is called by Shape(). It does nothing but may be redefined. More...

virtual const TopoDS_Shape &	Shape ()
	Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built. More...

	operator TopoDS_Shape ()

Public Member Functions inherited from BRepBuilderAPI_Command
virtual	~BRepBuilderAPI_Command ()

virtual Standard_Boolean	IsDone () const

void	Check () const
	Raises NotDone if done is false. More...

Static Public Member Functions
static Standard_Real	IntPar (const Handle< Geom_Curve > &C, const gp_Pnt &P)

static TopoDS_Face	ChoiceOfFaces (TopTools_ListOfShape &faces, const Handle< Geom_Curve > &cc, const Standard_Real par, const Standard_Real bnd, const Handle< Geom_Plane > &Pln)

Protected Member Functions
	BRepFeat_RibSlot ()
	Redefines the empty constructor. More...

void	LFPerform ()
	General perform method... More...

gp_Pnt	CheckPoint (const TopoDS_Edge &e, const Standard_Real bnd, const Handle< Geom_Plane > &Pln)

gp_Dir	Normal (const TopoDS_Face &F, const gp_Pnt &P)

void	EdgeExtention (TopoDS_Edge &e, const Standard_Real bnd, const Standard_Boolean FirstLast)

Standard_Real	HeightMax (const TopoDS_Shape &theSbase, const TopoDS_Shape &theSUntil, gp_Pnt &p1, gp_Pnt &p2)

Standard_Boolean	ExtremeFaces (const Standard_Boolean RevolRib, const Standard_Real bnd, const Handle< Geom_Plane > &Pln, TopoDS_Edge &FirstEdge, TopoDS_Edge &LastEdge, TopoDS_Face &FirstFace, TopoDS_Face &LastFace, TopoDS_Vertex &FirstVertex, TopoDS_Vertex &LastVertex, Standard_Boolean &OnFirstFace, Standard_Boolean &OnLastFace, Standard_Boolean &PtOnFirstEdge, Standard_Boolean &PtOnLastEdge, TopoDS_Edge &OnFirstEdge, TopoDS_Edge &OnLastEdge)

void	PtOnEdgeVertex (const Standard_Boolean RevolRib, const TopoDS_Shape &shape, const gp_Pnt &point, const TopoDS_Vertex &FirstVertex, const TopoDS_Vertex &LastVertex, Standard_Boolean &PtOnEdge, TopoDS_Edge &OnEdge, Standard_Boolean &PtOnVertex, TopoDS_Vertex &OnVertex)

Standard_Boolean	SlidingProfile (TopoDS_Face &Prof, const Standard_Boolean RevolRib, const Standard_Real myTol, Standard_Integer &Concavite, const Handle< Geom_Plane > &myPln, const TopoDS_Face &BndFace, const gp_Pnt &CheckPnt, const TopoDS_Face &FirstFace, const TopoDS_Face &LastFace, const TopoDS_Vertex &FirstVertex, const TopoDS_Vertex &LastVertex, const TopoDS_Edge &FirstEdge, const TopoDS_Edge &LastEdge)

Standard_Boolean	NoSlidingProfile (TopoDS_Face &Prof, const Standard_Boolean RevolRib, const Standard_Real myTol, Standard_Integer &Concavite, const Handle< Geom_Plane > &myPln, const Standard_Real bnd, const TopoDS_Face &BndFace, const gp_Pnt &CheckPnt, const TopoDS_Face &FirstFace, const TopoDS_Face &LastFace, const TopoDS_Vertex &FirstVertex, const TopoDS_Vertex &LastVertex, const TopoDS_Edge &FirstEdge, const TopoDS_Edge &LastEdge, const Standard_Boolean OnFirstFace, const Standard_Boolean OnLastFace)

void	UpdateDescendants (const LocOpe_Gluer &G)
	Updates the data structures of descendant shapes during the glueing operation.Returns the modified, generated and deleted faces during the course of the glueing operation. More...

void	UpdateDescendants (const BRepAlgoAPI_BooleanOperation &aBOP, const TopoDS_Shape &SResult, const Standard_Boolean SkipFace=Standard_False)

Protected Member Functions inherited from BRepBuilderAPI_MakeShape
	BRepBuilderAPI_MakeShape ()

Protected Member Functions inherited from BRepBuilderAPI_Command
	BRepBuilderAPI_Command ()
	Set done to False. More...

void	Done ()
	Set done to true. More...

void	NotDone ()
	Set done to false. More...

Detailed Description

Provides functions to build mechanical features. Mechanical features include ribs - protrusions and grooves (or slots) - depressions along planar (linear) surfaces or revolution surfaces. The semantics of mechanical features is built around giving thickness to a contour. This thickness can either be unilateral - on one side of the contour - or bilateral - on both sides. As in the semantics of form features, the thickness is defined by construction of shapes in specific contexts. The development contexts differ, however,in case of mechanical features. Here they include extrusion:

to a limiting face of the basis shape
to or from a limiting plane
to a height.

Constructor & Destructor Documentation

◆ BRepFeat_RibSlot()

BRepFeat_RibSlot::BRepFeat_RibSlot ( )

protected

Redefines the empty constructor.

Member Function Documentation

◆ CheckPoint()

gp_Pnt BRepFeat_RibSlot::CheckPoint	(	const TopoDS_Edge &	e,
		const Standard_Real	bnd,
		const Handle< Geom_Plane > &	Pln
	)

protected

◆ ChoiceOfFaces()

static TopoDS_Face BRepFeat_RibSlot::ChoiceOfFaces	(	TopTools_ListOfShape &	faces,
		const Handle< Geom_Curve > &	cc,
		const Standard_Real	par,
		const Standard_Real	bnd,
		const Handle< Geom_Plane > &	Pln
	)

static

◆ CurrentStatusError()

BRepFeat_StatusError BRepFeat_RibSlot::CurrentStatusError ( ) const

◆ EdgeExtention()

void BRepFeat_RibSlot::EdgeExtention	(	TopoDS_Edge &	e,
		const Standard_Real	bnd,
		const Standard_Boolean	FirstLast
	)

protected

◆ ExtremeFaces()

Standard_Boolean BRepFeat_RibSlot::ExtremeFaces	(	const Standard_Boolean	RevolRib,
		const Standard_Real	bnd,
		const Handle< Geom_Plane > &	Pln,
		TopoDS_Edge &	FirstEdge,
		TopoDS_Edge &	LastEdge,
		TopoDS_Face &	FirstFace,
		TopoDS_Face &	LastFace,
		TopoDS_Vertex &	FirstVertex,
		TopoDS_Vertex &	LastVertex,
		Standard_Boolean &	OnFirstFace,
		Standard_Boolean &	OnLastFace,
		Standard_Boolean &	PtOnFirstEdge,
		Standard_Boolean &	PtOnLastEdge,
		TopoDS_Edge &	OnFirstEdge,
		TopoDS_Edge &	OnLastEdge
	)

protected

◆ FacesForDraft()

const TopTools_ListOfShape& BRepFeat_RibSlot::FacesForDraft ( ) const

Returns a list of the limiting and glueing faces generated by the feature. These faces did not originally exist in the basis shape. The list provides the information necessary for subsequent addition of a draft to a face. It may be an empty list. If a face has tangent edges, no draft is possible, and the tangent edges must subsequently be removed if you want to add a draft to the face.

◆ FirstShape()

const TopTools_ListOfShape& BRepFeat_RibSlot::FirstShape ( ) const

Returns the list of shapes created at the bottom of the created form. It may be an empty list.

◆ Generated()

virtual const TopTools_ListOfShape& BRepFeat_RibSlot::Generated ( const TopoDS_Shape & S )

overridevirtual

Returns a list TopTools_ListOfShape of the faces S created in the shape.

Reimplemented from BRepBuilderAPI_MakeShape.

◆ HeightMax()

Standard_Real BRepFeat_RibSlot::HeightMax	(	const TopoDS_Shape &	theSbase,
		const TopoDS_Shape &	theSUntil,
		gp_Pnt &	p1,
		gp_Pnt &	p2
	)

protected

◆ IntPar()

static Standard_Real BRepFeat_RibSlot::IntPar	(	const Handle< Geom_Curve > &	C,
		const gp_Pnt &	P
	)

static

◆ IsDeleted()

virtual Standard_Boolean BRepFeat_RibSlot::IsDeleted ( const TopoDS_Shape & F )

overridevirtual

Returns true if F a TopoDS_Shape of type edge or face has been deleted.

Reimplemented from BRepBuilderAPI_MakeShape.

◆ LastShape()

const TopTools_ListOfShape& BRepFeat_RibSlot::LastShape ( ) const

Returns the list of shapes created at the top of the created form. It may be an empty list.

◆ LFPerform()

void BRepFeat_RibSlot::LFPerform ( )

protected

General perform method...

◆ Modified()

virtual const TopTools_ListOfShape& BRepFeat_RibSlot::Modified ( const TopoDS_Shape & F )

overridevirtual

Returns the list of generated Faces F. This list may be empty.

Reimplemented from BRepBuilderAPI_MakeShape.

◆ NewEdges()

const TopTools_ListOfShape& BRepFeat_RibSlot::NewEdges ( ) const

Returns a list of the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape. The list provides the information necessary for subsequent addition of fillets. It may be an empty list.

◆ Normal()

gp_Dir BRepFeat_RibSlot::Normal	(	const TopoDS_Face &	F,
		const gp_Pnt &	P
	)

protected

◆ NoSlidingProfile()

Standard_Boolean BRepFeat_RibSlot::NoSlidingProfile	(	TopoDS_Face &	Prof,
		const Standard_Boolean	RevolRib,
		const Standard_Real	myTol,
		Standard_Integer &	Concavite,
		const Handle< Geom_Plane > &	myPln,
		const Standard_Real	bnd,
		const TopoDS_Face &	BndFace,
		const gp_Pnt &	CheckPnt,
		const TopoDS_Face &	FirstFace,
		const TopoDS_Face &	LastFace,
		const TopoDS_Vertex &	FirstVertex,
		const TopoDS_Vertex &	LastVertex,
		const TopoDS_Edge &	FirstEdge,
		const TopoDS_Edge &	LastEdge,
		const Standard_Boolean	OnFirstFace,
		const Standard_Boolean	OnLastFace
	)

protected

◆ PtOnEdgeVertex()

void BRepFeat_RibSlot::PtOnEdgeVertex	(	const Standard_Boolean	RevolRib,
		const TopoDS_Shape &	shape,
		const gp_Pnt &	point,
		const TopoDS_Vertex &	FirstVertex,
		const TopoDS_Vertex &	LastVertex,
		Standard_Boolean &	PtOnEdge,
		TopoDS_Edge &	OnEdge,
		Standard_Boolean &	PtOnVertex,
		TopoDS_Vertex &	OnVertex
	)

protected

◆ SlidingProfile()

Standard_Boolean BRepFeat_RibSlot::SlidingProfile	(	TopoDS_Face &	Prof,
		const Standard_Boolean	RevolRib,
		const Standard_Real	myTol,
		Standard_Integer &	Concavite,
		const Handle< Geom_Plane > &	myPln,
		const TopoDS_Face &	BndFace,
		const gp_Pnt &	CheckPnt,
		const TopoDS_Face &	FirstFace,
		const TopoDS_Face &	LastFace,
		const TopoDS_Vertex &	FirstVertex,
		const TopoDS_Vertex &	LastVertex,
		const TopoDS_Edge &	FirstEdge,
		const TopoDS_Edge &	LastEdge
	)

protected

◆ TgtEdges()

const TopTools_ListOfShape& BRepFeat_RibSlot::TgtEdges ( ) const

Returns a list of the tangent edges among the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape and are tangent to the face against which the feature is built. The list provides the information necessary for subsequent addition of fillets. It may be an empty list. If an edge is tangent, no fillet is possible, and the edge must subsequently be removed if you want to add a fillet.

◆ UpdateDescendants() [1/2]

void BRepFeat_RibSlot::UpdateDescendants ( const LocOpe_Gluer & G )

protected

Updates the data structures of descendant shapes during the glueing operation.Returns the modified, generated and deleted faces during the course of the glueing operation.

◆ UpdateDescendants() [2/2]

void BRepFeat_RibSlot::UpdateDescendants	(	const BRepAlgoAPI_BooleanOperation &	aBOP,
		const TopoDS_Shape &	SResult,
		const Standard_Boolean	SkipFace = `Standard_False`
	)

protected

Field Documentation

◆ myFacesForDraft

TopTools_ListOfShape BRepFeat_RibSlot::myFacesForDraft

protected

◆ myFirstPnt

gp_Pnt BRepFeat_RibSlot::myFirstPnt

protected

◆ myFShape

TopoDS_Shape BRepFeat_RibSlot::myFShape

protected

◆ myFuse

Standard_Boolean BRepFeat_RibSlot::myFuse

protected

◆ myGluedF

TopTools_DataMapOfShapeShape BRepFeat_RibSlot::myGluedF

protected

◆ myGShape

TopoDS_Shape BRepFeat_RibSlot::myGShape

protected

◆ myLastPnt

gp_Pnt BRepFeat_RibSlot::myLastPnt

protected

◆ myLFMap

TopTools_DataMapOfShapeListOfShape BRepFeat_RibSlot::myLFMap

protected

◆ myLShape

TopoDS_Shape BRepFeat_RibSlot::myLShape

protected

◆ myMap

TopTools_DataMapOfShapeListOfShape BRepFeat_RibSlot::myMap

protected

◆ myNewEdges

TopTools_ListOfShape BRepFeat_RibSlot::myNewEdges

protected

◆ myPbase

TopoDS_Face BRepFeat_RibSlot::myPbase

protected

◆ myPerfSelection

BRepFeat_PerfSelection BRepFeat_RibSlot::myPerfSelection

protected

◆ mySbase

TopoDS_Shape BRepFeat_RibSlot::mySbase

protected

◆ mySkface

TopoDS_Face BRepFeat_RibSlot::mySkface

protected

◆ mySliding

Standard_Boolean BRepFeat_RibSlot::mySliding

protected

◆ myStatusError

BRepFeat_StatusError BRepFeat_RibSlot::myStatusError

protected

◆ mySUntil

TopoDS_Shape BRepFeat_RibSlot::mySUntil

protected

◆ myTgtEdges

TopTools_ListOfShape BRepFeat_RibSlot::myTgtEdges

protected

◆ myWire

TopoDS_Wire BRepFeat_RibSlot::myWire

protected

The documentation for this class was generated from the following file:

BRepFeat_RibSlot.hxx

Protected Attributes
gp_Pnt	myFirstPnt

gp_Pnt	myLastPnt

Standard_Boolean	myFuse

Standard_Boolean	mySliding

TopTools_DataMapOfShapeListOfShape	myMap

TopTools_DataMapOfShapeListOfShape	myLFMap

TopoDS_Shape	myFShape

TopoDS_Shape	myLShape

BRepFeat_PerfSelection	myPerfSelection

TopoDS_Wire	myWire

TopoDS_Shape	mySbase

TopoDS_Face	mySkface

TopoDS_Face	myPbase

TopoDS_Shape	myGShape

TopoDS_Shape	mySUntil

TopTools_DataMapOfShapeShape	myGluedF

TopTools_ListOfShape	myNewEdges

TopTools_ListOfShape	myTgtEdges

TopTools_ListOfShape	myFacesForDraft

BRepFeat_StatusError	myStatusError

Protected Attributes inherited from BRepBuilderAPI_MakeShape
TopoDS_Shape	myShape

TopTools_ListOfShape	myGenerated

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ BRepFeat_RibSlot()

Member Function Documentation

◆ CheckPoint()

◆ ChoiceOfFaces()

◆ CurrentStatusError()

◆ EdgeExtention()

◆ ExtremeFaces()

◆ FacesForDraft()

◆ FirstShape()

◆ Generated()

◆ HeightMax()

◆ IntPar()

◆ IsDeleted()

◆ LastShape()

◆ LFPerform()

◆ Modified()

◆ NewEdges()

◆ Normal()

◆ NoSlidingProfile()

◆ PtOnEdgeVertex()

◆ SlidingProfile()

◆ TgtEdges()

◆ UpdateDescendants() [1/2]

◆ UpdateDescendants() [2/2]

Field Documentation

◆ myFacesForDraft

◆ myFirstPnt

◆ myFShape

◆ myFuse

◆ myGluedF

◆ myGShape

◆ myLastPnt

◆ myLFMap

◆ myLShape

◆ myMap

◆ myNewEdges

◆ myPbase

◆ myPerfSelection

◆ mySbase

◆ mySkface

◆ mySliding

◆ myStatusError

◆ mySUntil

◆ myTgtEdges

◆ myWire