Tool of construction of fillets 3d on edges (on a solid). More...

#include <ChFi3d_FilBuilder.hxx>

Inheritance diagram for ChFi3d_FilBuilder:

Public Member Functions
	ChFi3d_FilBuilder (const TopoDS_Shape &S, const ChFi3d_FilletShape FShape=ChFi3d_Rational, const Standard_Real Ta=1.0e-2)

void	SetFilletShape (const ChFi3d_FilletShape FShape)
	Sets the type of fillet surface. More...

ChFi3d_FilletShape	GetFilletShape () const
	Returns the type of fillet surface. More...

void	Add (const TopoDS_Edge &E)
	initialisation of a contour with the first edge (the following are found by propagation). Attention, you need to start with SetRadius. More...

void	Add (const Standard_Real Radius, const TopoDS_Edge &E)
	initialisation of the constant vector the corresponding 1st edge. More...

void	SetRadius (const Handle< Law_Function > &C, const Standard_Integer IC, const Standard_Integer IinC)
	Set the radius of the contour of index IC. More...

Standard_Boolean	IsConstant (const Standard_Integer IC)
	Returns true the contour is flagged as edge constant. More...

Standard_Real	Radius (const Standard_Integer IC)
	Returns the vector if the contour is flagged as edge constant. More...

void	ResetContour (const Standard_Integer IC)
	Reset all vectors of contour IC. More...

void	SetRadius (const Standard_Real Radius, const Standard_Integer IC, const TopoDS_Edge &E)
	Set a constant on edge E of the contour of index IC. Since then E is flagged as constant. More...

void	UnSet (const Standard_Integer IC, const TopoDS_Edge &E)
	Extracts the flag constant and the vector of edge E. More...

void	SetRadius (const Standard_Real Radius, const Standard_Integer IC, const TopoDS_Vertex &V)
	Set a vector on vertex V of the contour of index IC. More...

void	UnSet (const Standard_Integer IC, const TopoDS_Vertex &V)
	Extracts the vector of the vertex V. More...

void	SetRadius (const gp_XY &UandR, const Standard_Integer IC, const Standard_Integer IinC)
	Set a vertex on the point of parametre U in the edge IinC of the contour of index IC. More...

Standard_Boolean	IsConstant (const Standard_Integer IC, const TopoDS_Edge &E)
	Returns true E is flagged as edge constant. More...

Standard_Real	Radius (const Standard_Integer IC, const TopoDS_Edge &E)
	Returns the vector if E is flagged as edge constant. More...

Standard_Boolean	GetBounds (const Standard_Integer IC, const TopoDS_Edge &E, Standard_Real &First, Standard_Real &Last)
	Returns in First and Last les extremities of the part of variable vector framing E, returns False if E is flagged as edge constant. More...

Handle< Law_Function >	GetLaw (const Standard_Integer IC, const TopoDS_Edge &E)
	Returns the rule of elementary evolution of the part to variable vector framing E, returns a rule zero if E is flagged as edge constant. More...

void	SetLaw (const Standard_Integer IC, const TopoDS_Edge &E, const Handle< Law_Function > &L)
	Sets the rule of elementary evolution of the part to variable vector framing E. More...

void	Simulate (const Standard_Integer IC)

Standard_Integer	NbSurf (const Standard_Integer IC) const

Handle< ChFiDS_SecHArray1 >	Sect (const Standard_Integer IC, const Standard_Integer IS) const

Public Member Functions inherited from ChFi3d_Builder
virtual	~ChFi3d_Builder ()

void	SetParams (const Standard_Real Tang, const Standard_Real Tesp, const Standard_Real T2d, const Standard_Real TApp3d, const Standard_Real TolApp2d, const Standard_Real Fleche)

void	SetContinuity (const GeomAbs_Shape InternalContinuity, const Standard_Real AngularTolerance)

void	Remove (const TopoDS_Edge &E)
	extracts from the list the contour containing edge E. More...

Standard_Integer	Contains (const TopoDS_Edge &E) const
	gives the number of the contour containing E or 0 if E does not belong to any contour. More...

Standard_Integer	Contains (const TopoDS_Edge &E, Standard_Integer &IndexInSpine) const
	gives the number of the contour containing E or 0 if E does not belong to any contour. Sets in IndexInSpine the index of E in the contour if it's found More...

Standard_Integer	NbElements () const
	gives the number of disjoint contours on which the fillets are calculated More...

Handle< ChFiDS_Spine >	Value (const Standard_Integer I) const
	gives the n'th set of edges (contour) if I >NbElements() More...

Standard_Real	Length (const Standard_Integer IC) const
	returns the length of the contour of index IC. More...

TopoDS_Vertex	FirstVertex (const Standard_Integer IC) const
	returns the First vertex V of the contour of index IC. More...

TopoDS_Vertex	LastVertex (const Standard_Integer IC) const
	returns the Last vertex V of the contour of index IC. More...

Standard_Real	Abscissa (const Standard_Integer IC, const TopoDS_Vertex &V) const
	returns the abscissa of the vertex V on the contour of index IC. More...

Standard_Real	RelativeAbscissa (const Standard_Integer IC, const TopoDS_Vertex &V) const
	returns the relative abscissa([0.,1.]) of the vertex V on the contour of index IC. More...

Standard_Boolean	ClosedAndTangent (const Standard_Integer IC) const
	returns true if the contour of index IC is closed an tangent. More...

Standard_Boolean	Closed (const Standard_Integer IC) const
	returns true if the contour of index IC is closed More...

void	Compute ()
	general calculation of geometry on all edges, topologic reconstruction. More...

Standard_Boolean	IsDone () const
	returns True if the computation is success More...

TopoDS_Shape	Shape () const
	if (Isdone()) makes the result. if (!Isdone()) More...

const TopTools_ListOfShape &	Generated (const TopoDS_Shape &EouV)
	Advanced function for the history. More...

Standard_Integer	NbFaultyContours () const
	Returns the number of contours on which the calculation has failed. More...

Standard_Integer	FaultyContour (const Standard_Integer I) const
	Returns the number of I'th contour on which the calculation has failed. More...

Standard_Integer	NbComputedSurfaces (const Standard_Integer IC) const
	Returns the number of surfaces calculated on the contour IC. More...

Handle< Geom_Surface >	ComputedSurface (const Standard_Integer IC, const Standard_Integer IS) const
	Returns the IS'th surface calculated on the contour IC. More...

Standard_Integer	NbFaultyVertices () const
	Returns the number of vertices on which the calculation has failed. More...

TopoDS_Vertex	FaultyVertex (const Standard_Integer IV) const
	Returns the IV'th vertex on which the calculation has failed. More...

Standard_Boolean	HasResult () const
	returns True if a partial result has been calculated More...

TopoDS_Shape	BadShape () const
	if (HasResult()) returns partial result if (!HasResult()) More...

ChFiDS_ErrorStatus	StripeStatus (const Standard_Integer IC) const
	for the stripe IC ,indication on the cause of failure WalkingFailure,TwistedSurface,Error, Ok More...

void	Reset ()
	Reset all results of compute and returns the algorithm in the state of the last acquisition to enable modification of contours or areas. More...

Handle< TopOpeBRepBuild_HBuilder >	Builder () const
	Returns the Builder of topologic operations. More...

Standard_Boolean	SplitKPart (const Handle< ChFiDS_SurfData > &Data, ChFiDS_SequenceOfSurfData &SetData, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Iedge, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Intf, Standard_Boolean &Intl)
	Method, implemented in the inheritants, calculates the elements of construction of the surface (fillet or chamfer). More...

Standard_Boolean	PerformTwoCornerbyInter (const Standard_Integer Index)

Protected Member Functions
void	SimulKPart (const Handle< ChFiDS_SurfData > &SD) const override

Standard_Boolean	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecOnS1, const Standard_Boolean RecOnS2, const math_Vector &Soldep, Standard_Integer &Intf, Standard_Integer &Intl) override

virtual void	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Curve2d > &PC1, const Handle< BRepAdaptor_Surface > &Sref1, const Handle< BRepAdaptor_Curve2d > &PCref1, Standard_Boolean &Decroch1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const TopAbs_Orientation Or2, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep) override

virtual void	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_Curve2d > &PC2, const Handle< BRepAdaptor_Surface > &Sref2, const Handle< BRepAdaptor_Curve2d > &PCref2, Standard_Boolean &Decroch2, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep) override

virtual void	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Curve2d > &PC1, const Handle< BRepAdaptor_Surface > &Sref1, const Handle< BRepAdaptor_Curve2d > &PCref1, Standard_Boolean &Decroch1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_Curve2d > &PC2, const Handle< BRepAdaptor_Surface > &Sref2, const Handle< BRepAdaptor_Curve2d > &PCref2, Standard_Boolean &Decroch2, const TopAbs_Orientation Or2, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2, const math_Vector &Soldep) override

Standard_Boolean	PerformFirstSection (const Handle< ChFiDS_Spine > &S, const Handle< ChFiDS_ElSpine > &HGuide, const Standard_Integer Choix, Handle< BRepAdaptor_Surface > &S1, Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real Par, math_Vector &SolDep, TopAbs_State &Pos1, TopAbs_State &Pos2) const override

Standard_Boolean	PerformSurf (ChFiDS_SequenceOfSurfData &SeqData, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecOnS1, const Standard_Boolean RecOnS2, const math_Vector &Soldep, Standard_Integer &Intf, Standard_Integer &Intl) override
	Method calculates the elements of construction of the fillet (constant or evolutive). More...

virtual void	PerformSurf (ChFiDS_SequenceOfSurfData &SeqData, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Curve2d > &PC1, const Handle< BRepAdaptor_Surface > &Sref1, const Handle< BRepAdaptor_Curve2d > &PCref1, Standard_Boolean &Decroch1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const TopAbs_Orientation Or2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep) override
	Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face. More...

virtual void	PerformSurf (ChFiDS_SequenceOfSurfData &SeqData, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_Curve2d > &PC2, const Handle< BRepAdaptor_Surface > &Sref2, const Handle< BRepAdaptor_Curve2d > &PCref2, Standard_Boolean &Decroch2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep) override
	Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face. More...

virtual void	PerformSurf (ChFiDS_SequenceOfSurfData &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Curve2d > &PC1, const Handle< BRepAdaptor_Surface > &Sref1, const Handle< BRepAdaptor_Curve2d > &PCref1, Standard_Boolean &Decroch1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_Curve2d > &PC2, const Handle< BRepAdaptor_Surface > &Sref2, const Handle< BRepAdaptor_Curve2d > &PCref2, Standard_Boolean &Decroch2, const TopAbs_Orientation Or2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2, const math_Vector &Soldep) override
	Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/edge. More...

void	SplitSurf (ChFiDS_SequenceOfSurfData &SeqData, const Handle< BRepBlend_Line > &line)
	Method to split an singular SurfData in several non singular SurfData.. More...

void	PerformTwoCorner (const Standard_Integer Index) override

void	PerformThreeCorner (const Standard_Integer Index) override

void	ExtentOneCorner (const TopoDS_Vertex &V, const Handle< ChFiDS_Stripe > &S) override

void	ExtentTwoCorner (const TopoDS_Vertex &V, const ChFiDS_ListOfStripe &LS) override

void	ExtentThreeCorner (const TopoDS_Vertex &V, const ChFiDS_ListOfStripe &LS) override

void	SetRegul () override

Protected Member Functions inherited from ChFi3d_Builder
	ChFi3d_Builder (const TopoDS_Shape &S, const Standard_Real Ta)

Standard_Boolean	SimulData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_ElSpine > &AdditionalGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, Blend_Function &Func, Blend_FuncInv &FInv, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const math_Vector &Soldep, const Standard_Integer NbSecMin, const Standard_Boolean RecOnS1=Standard_False, const Standard_Boolean RecOnS2=Standard_False)

Standard_Boolean	SimulData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor2d_Curve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch, Blend_SurfRstFunction &Func, Blend_FuncInv &FInv, Blend_SurfPointFuncInv &FInvP, Blend_SurfCurvFuncInv &FInvC, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Integer NbSecMin, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst)

Standard_Boolean	SimulData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor2d_Curve2d > &PC1, const Handle< Adaptor3d_TopolTool > &I1, Standard_Boolean &Decroch1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor2d_Curve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch2, Blend_RstRstFunction &Func, Blend_SurfCurvFuncInv &FInv1, Blend_CurvPointFuncInv &FInvP1, Blend_SurfCurvFuncInv &FInv2, Blend_CurvPointFuncInv &FInvP2, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Integer NbSecMin, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2)

Standard_Boolean	PerformElement (const Handle< ChFiDS_Spine > &CElement, const Standard_Real Offset, const TopoDS_Face &theFirstFace)

void	PerformExtremity (const Handle< ChFiDS_Spine > &CElement)

void	PerformSetOfSurf (Handle< ChFiDS_Stripe > &S, const Standard_Boolean Simul=Standard_False)

void	PerformSetOfKPart (Handle< ChFiDS_Stripe > &S, const Standard_Boolean Simul=Standard_False)

void	PerformSetOfKGen (Handle< ChFiDS_Stripe > &S, const Standard_Boolean Simul=Standard_False)

void	Trunc (const Handle< ChFiDS_SurfData > &SD, const Handle< ChFiDS_Spine > &Spine, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const Standard_Integer iedge, const Standard_Boolean isfirst, const Standard_Integer cntlFiOnS)

void	CallPerformSurf (Handle< ChFiDS_Stripe > &Stripe, const Standard_Boolean Simul, ChFiDS_SequenceOfSurfData &SeqSD, Handle< ChFiDS_SurfData > &SD, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Handle< BRepAdaptor_Surface > &HS1, const Handle< BRepAdaptor_Surface > &HS3, const gp_Pnt2d &P1, const gp_Pnt2d &P3, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Surface > &HS2, const Handle< BRepAdaptor_Surface > &HS4, const gp_Pnt2d &P2, const gp_Pnt2d &P4, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecOnS1, const Standard_Boolean RecOnS2, math_Vector &Soldep, Standard_Integer &Intf, Standard_Integer &Intl, Handle< BRepAdaptor_Surface > &Surf1, Handle< BRepAdaptor_Surface > &Surf2)

void	PerformMoreThreeCorner (const Standard_Integer Index, const Standard_Integer nbcourb)

Standard_Boolean	SearchFace (const Handle< ChFiDS_Spine > &Sp, const ChFiDS_CommonPoint &Pc, const TopoDS_Face &FRef, TopoDS_Face &FVoi) const

Standard_Boolean	StripeOrientations (const Handle< ChFiDS_Spine > &Sp, TopAbs_Orientation &Or1, TopAbs_Orientation &Or2, Standard_Integer &ChoixConge) const

Standard_Boolean	ComputeData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, Blend_Function &Func, Blend_FuncInv &FInv, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const math_Vector &Soldep, Standard_Integer &Intf, Standard_Integer &Intl, Standard_Boolean &Gd1, Standard_Boolean &Gd2, Standard_Boolean &Gf1, Standard_Boolean &Gf2, const Standard_Boolean RecOnS1=Standard_False, const Standard_Boolean RecOnS2=Standard_False)
	Calculates a Line of contact face/face. More...

Standard_Boolean	ComputeData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor2d_Curve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch, Blend_SurfRstFunction &Func, Blend_FuncInv &FInv, Blend_SurfPointFuncInv &FInvP, Blend_SurfCurvFuncInv &FInvC, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst)
	Calculates a Line of contact edge/face. More...

Standard_Boolean	ComputeData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor2d_Curve2d > &PC1, const Handle< Adaptor3d_TopolTool > &I1, Standard_Boolean &Decroch1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor2d_Curve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch2, Blend_RstRstFunction &Func, Blend_SurfCurvFuncInv &FInv1, Blend_CurvPointFuncInv &FInvP1, Blend_SurfCurvFuncInv &FInv2, Blend_CurvPointFuncInv &FInvP2, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2)
	Calculates a Line of contact edge/edge. More...

Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, Blend_Function &Func, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const TopAbs_Orientation Or1, const Standard_Boolean Gd1, const Standard_Boolean Gd2, const Standard_Boolean Gf1, const Standard_Boolean Gf2, const Standard_Boolean Reversed=Standard_False)

Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, Blend_SurfRstFunction &Func, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const TopAbs_Orientation Or, const Standard_Boolean Reversed)

Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, Blend_RstRstFunction &Func, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const TopAbs_Orientation Or)

Standard_Boolean	StoreData (Handle< ChFiDS_SurfData > &Data, const AppBlend_Approx &Approx, const Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const TopAbs_Orientation Or1, const Standard_Boolean Gd1, const Standard_Boolean Gd2, const Standard_Boolean Gf1, const Standard_Boolean Gf2, const Standard_Boolean Reversed=Standard_False)

Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, const Handle< Geom_Surface > &Surfcoin, const Handle< Adaptor3d_Surface > &S1, const Handle< Geom2d_Curve > &PC1, const Handle< Adaptor3d_Surface > &S2, const Handle< Geom2d_Curve > &PC2, const TopAbs_Orientation Or, const Standard_Boolean On1, const Standard_Boolean Gd1, const Standard_Boolean Gd2, const Standard_Boolean Gf1, const Standard_Boolean Gf2)

Detailed Description

Tool of construction of fillets 3d on edges (on a solid).

Constructor & Destructor Documentation

◆ ChFi3d_FilBuilder()

ChFi3d_FilBuilder::ChFi3d_FilBuilder	(	const TopoDS_Shape &	S,
		const ChFi3d_FilletShape	FShape = `ChFi3d_Rational`,
		const Standard_Real	Ta = `1.0e-2`
	)

Member Function Documentation

◆ Add() [1/2]

void ChFi3d_FilBuilder::Add ( const TopoDS_Edge & E )

initialisation of a contour with the first edge (the following are found by propagation). Attention, you need to start with SetRadius.

◆ Add() [2/2]

void ChFi3d_FilBuilder::Add	(	const Standard_Real	Radius,
		const TopoDS_Edge &	E
	)

initialisation of the constant vector the corresponding 1st edge.

◆ ExtentOneCorner()

void ChFi3d_FilBuilder::ExtentOneCorner	(	const TopoDS_Vertex &	V,
		const Handle< ChFiDS_Stripe > &	S
	)

overrideprotectedvirtual

Implements ChFi3d_Builder.

◆ ExtentThreeCorner()

void ChFi3d_FilBuilder::ExtentThreeCorner	(	const TopoDS_Vertex &	V,
		const ChFiDS_ListOfStripe &	LS
	)

overrideprotectedvirtual

Implements ChFi3d_Builder.

◆ ExtentTwoCorner()

void ChFi3d_FilBuilder::ExtentTwoCorner	(	const TopoDS_Vertex &	V,
		const ChFiDS_ListOfStripe &	LS
	)

overrideprotectedvirtual

Implements ChFi3d_Builder.

◆ GetBounds()

Standard_Boolean ChFi3d_FilBuilder::GetBounds	(	const Standard_Integer	IC,
		const TopoDS_Edge &	E,
		Standard_Real &	First,
		Standard_Real &	Last
	)

Returns in First and Last les extremities of the part of variable vector framing E, returns False if E is flagged as edge constant.

◆ GetFilletShape()

ChFi3d_FilletShape ChFi3d_FilBuilder::GetFilletShape ( ) const

Returns the type of fillet surface.

◆ GetLaw()

Handle< Law_Function > ChFi3d_FilBuilder::GetLaw	(	const Standard_Integer	IC,
		const TopoDS_Edge &	E
	)

Returns the rule of elementary evolution of the part to variable vector framing E, returns a rule zero if E is flagged as edge constant.

◆ IsConstant() [1/2]

Standard_Boolean ChFi3d_FilBuilder::IsConstant ( const Standard_Integer IC )

Returns true the contour is flagged as edge constant.

◆ IsConstant() [2/2]

Standard_Boolean ChFi3d_FilBuilder::IsConstant	(	const Standard_Integer	IC,
		const TopoDS_Edge &	E
	)

Returns true E is flagged as edge constant.

◆ NbSurf()

Standard_Integer ChFi3d_FilBuilder::NbSurf ( const Standard_Integer IC ) const

◆ PerformFirstSection()

Standard_Boolean ChFi3d_FilBuilder::PerformFirstSection	(	const Handle< ChFiDS_Spine > &	S,
		const Handle< ChFiDS_ElSpine > &	HGuide,
		const Standard_Integer	Choix,
		Handle< BRepAdaptor_Surface > &	S1,
		Handle< BRepAdaptor_Surface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const Handle< Adaptor3d_TopolTool > &	I2,
		const Standard_Real	Par,
		math_Vector &	SolDep,
		TopAbs_State &	Pos1,
		TopAbs_State &	Pos2
	)		const

overrideprotectedvirtual

Implements ChFi3d_Builder.

◆ PerformSurf() [1/4]

Standard_Boolean ChFi3d_FilBuilder::PerformSurf	(	ChFiDS_SequenceOfSurfData &	SeqData,
		const Handle< ChFiDS_ElSpine > &	Guide,
		const Handle< ChFiDS_Spine > &	Spine,
		const Standard_Integer	Choix,
		const Handle< BRepAdaptor_Surface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const Handle< BRepAdaptor_Surface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I2,
		const Standard_Real	MaxStep,
		const Standard_Real	Fleche,
		const Standard_Real	TolGuide,
		Standard_Real &	First,
		Standard_Real &	Last,
		const Standard_Boolean	Inside,
		const Standard_Boolean	Appro,
		const Standard_Boolean	Forward,
		const Standard_Boolean	RecOnS1,
		const Standard_Boolean	RecOnS2,
		const math_Vector &	Soldep,
		Standard_Integer &	Intf,
		Standard_Integer &	Intl
	)

overrideprotectedvirtual

Method calculates the elements of construction of the fillet (constant or evolutive).

Implements ChFi3d_Builder.

Reimplemented in FilletSurf_InternalBuilder.

◆ PerformSurf() [2/4]

virtual void ChFi3d_FilBuilder::PerformSurf	(	ChFiDS_SequenceOfSurfData &	Data,
		const Handle< ChFiDS_ElSpine > &	Guide,
		const Handle< ChFiDS_Spine > &	Spine,
		const Standard_Integer	Choix,
		const Handle< BRepAdaptor_Surface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const Handle< BRepAdaptor_Curve2d > &	PC1,
		const Handle< BRepAdaptor_Surface > &	Sref1,
		const Handle< BRepAdaptor_Curve2d > &	PCref1,
		Standard_Boolean &	Decroch1,
		const Handle< BRepAdaptor_Surface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I2,
		const TopAbs_Orientation	Or2,
		const Standard_Real	MaxStep,
		const Standard_Real	Fleche,
		const Standard_Real	TolGuide,
		Standard_Real &	First,
		Standard_Real &	Last,
		const Standard_Boolean	Inside,
		const Standard_Boolean	Appro,
		const Standard_Boolean	Forward,
		const Standard_Boolean	RecP,
		const Standard_Boolean	RecS,
		const Standard_Boolean	RecRst,
		const math_Vector &	Soldep
	)

overrideprotectedvirtual

Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face.

Reimplemented from ChFi3d_Builder.

Reimplemented in FilletSurf_InternalBuilder.

◆ PerformSurf() [3/4]

virtual void ChFi3d_FilBuilder::PerformSurf	(	ChFiDS_SequenceOfSurfData &	Data,
		const Handle< ChFiDS_ElSpine > &	Guide,
		const Handle< ChFiDS_Spine > &	Spine,
		const Standard_Integer	Choix,
		const Handle< BRepAdaptor_Surface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const TopAbs_Orientation	Or1,
		const Handle< BRepAdaptor_Surface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I2,
		const Handle< BRepAdaptor_Curve2d > &	PC2,
		const Handle< BRepAdaptor_Surface > &	Sref2,
		const Handle< BRepAdaptor_Curve2d > &	PCref2,
		Standard_Boolean &	Decroch2,
		const Standard_Real	MaxStep,
		const Standard_Real	Fleche,
		const Standard_Real	TolGuide,
		Standard_Real &	First,
		Standard_Real &	Last,
		const Standard_Boolean	Inside,
		const Standard_Boolean	Appro,
		const Standard_Boolean	Forward,
		const Standard_Boolean	RecP,
		const Standard_Boolean	RecS,
		const Standard_Boolean	RecRst,
		const math_Vector &	Soldep
	)

overrideprotectedvirtual

Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face.

Reimplemented from ChFi3d_Builder.

Reimplemented in FilletSurf_InternalBuilder.

◆ PerformSurf() [4/4]

virtual void ChFi3d_FilBuilder::PerformSurf	(	ChFiDS_SequenceOfSurfData &	Data,
		const Handle< ChFiDS_ElSpine > &	Guide,
		const Handle< ChFiDS_Spine > &	Spine,
		const Standard_Integer	Choix,
		const Handle< BRepAdaptor_Surface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const Handle< BRepAdaptor_Curve2d > &	PC1,
		const Handle< BRepAdaptor_Surface > &	Sref1,
		const Handle< BRepAdaptor_Curve2d > &	PCref1,
		Standard_Boolean &	Decroch1,
		const TopAbs_Orientation	Or1,
		const Handle< BRepAdaptor_Surface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I2,
		const Handle< BRepAdaptor_Curve2d > &	PC2,
		const Handle< BRepAdaptor_Surface > &	Sref2,
		const Handle< BRepAdaptor_Curve2d > &	PCref2,
		Standard_Boolean &	Decroch2,
		const TopAbs_Orientation	Or2,
		const Standard_Real	MaxStep,
		const Standard_Real	Fleche,
		const Standard_Real	TolGuide,
		Standard_Real &	First,
		Standard_Real &	Last,
		const Standard_Boolean	Inside,
		const Standard_Boolean	Appro,
		const Standard_Boolean	Forward,
		const Standard_Boolean	RecP1,
		const Standard_Boolean	RecRst1,
		const Standard_Boolean	RecP2,
		const Standard_Boolean	RecRst2,
		const math_Vector &	Soldep
	)

overrideprotectedvirtual

Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/edge.

Reimplemented from ChFi3d_Builder.

Reimplemented in FilletSurf_InternalBuilder.

◆ PerformThreeCorner()

void ChFi3d_FilBuilder::PerformThreeCorner ( const Standard_Integer Index )

overrideprotectedvirtual

Implements ChFi3d_Builder.

◆ PerformTwoCorner()

void ChFi3d_FilBuilder::PerformTwoCorner ( const Standard_Integer Index )

overrideprotectedvirtual

Implements ChFi3d_Builder.

◆ Radius() [1/2]

Standard_Real ChFi3d_FilBuilder::Radius ( const Standard_Integer IC )

Returns the vector if the contour is flagged as edge constant.

◆ Radius() [2/2]

Standard_Real ChFi3d_FilBuilder::Radius	(	const Standard_Integer	IC,
		const TopoDS_Edge &	E
	)

Returns the vector if E is flagged as edge constant.

◆ ResetContour()

void ChFi3d_FilBuilder::ResetContour ( const Standard_Integer IC )

Reset all vectors of contour IC.

◆ Sect()

Handle< ChFiDS_SecHArray1 > ChFi3d_FilBuilder::Sect	(	const Standard_Integer	IC,
		const Standard_Integer	IS
	)		const

◆ SetFilletShape()

void ChFi3d_FilBuilder::SetFilletShape ( const ChFi3d_FilletShape FShape )

Sets the type of fillet surface.

◆ SetLaw()

void ChFi3d_FilBuilder::SetLaw	(	const Standard_Integer	IC,
		const TopoDS_Edge &	E,
		const Handle< Law_Function > &	L
	)

Sets the rule of elementary evolution of the part to variable vector framing E.

◆ SetRadius() [1/4]

void ChFi3d_FilBuilder::SetRadius	(	const Handle< Law_Function > &	C,
		const Standard_Integer	IC,
		const Standard_Integer	IinC
	)

Set the radius of the contour of index IC.

◆ SetRadius() [2/4]

void ChFi3d_FilBuilder::SetRadius	(	const Standard_Real	Radius,
		const Standard_Integer	IC,
		const TopoDS_Edge &	E
	)

Set a constant on edge E of the contour of index IC. Since then E is flagged as constant.

◆ SetRadius() [3/4]

void ChFi3d_FilBuilder::SetRadius	(	const Standard_Real	Radius,
		const Standard_Integer	IC,
		const TopoDS_Vertex &	V
	)

Set a vector on vertex V of the contour of index IC.

◆ SetRadius() [4/4]

void ChFi3d_FilBuilder::SetRadius	(	const gp_XY &	UandR,
		const Standard_Integer	IC,
		const Standard_Integer	IinC
	)

Set a vertex on the point of parametre U in the edge IinC of the contour of index IC.

◆ SetRegul()

void ChFi3d_FilBuilder::SetRegul ( )

overrideprotectedvirtual

Implements ChFi3d_Builder.

◆ Simulate()

void ChFi3d_FilBuilder::Simulate ( const Standard_Integer IC )

◆ SimulKPart()

void ChFi3d_FilBuilder::SimulKPart ( const Handle< ChFiDS_SurfData > & SD ) const

overrideprotectedvirtual

Implements ChFi3d_Builder.

◆ SimulSurf() [1/4]

Standard_Boolean ChFi3d_FilBuilder::SimulSurf	(	Handle< ChFiDS_SurfData > &	Data,
		const Handle< ChFiDS_ElSpine > &	Guide,
		const Handle< ChFiDS_Spine > &	Spine,
		const Standard_Integer	Choix,
		const Handle< BRepAdaptor_Surface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const Handle< BRepAdaptor_Surface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I2,
		const Standard_Real	TolGuide,
		Standard_Real &	First,
		Standard_Real &	Last,
		const Standard_Boolean	Inside,
		const Standard_Boolean	Appro,
		const Standard_Boolean	Forward,
		const Standard_Boolean	RecOnS1,
		const Standard_Boolean	RecOnS2,
		const math_Vector &	Soldep,
		Standard_Integer &	Intf,
		Standard_Integer &	Intl
	)

overrideprotectedvirtual

Implements ChFi3d_Builder.

◆ SimulSurf() [2/4]

virtual void ChFi3d_FilBuilder::SimulSurf	(	Handle< ChFiDS_SurfData > &	Data,
		const Handle< ChFiDS_ElSpine > &	Guide,
		const Handle< ChFiDS_Spine > &	Spine,
		const Standard_Integer	Choix,
		const Handle< BRepAdaptor_Surface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const Handle< BRepAdaptor_Curve2d > &	PC1,
		const Handle< BRepAdaptor_Surface > &	Sref1,
		const Handle< BRepAdaptor_Curve2d > &	PCref1,
		Standard_Boolean &	Decroch1,
		const Handle< BRepAdaptor_Surface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I2,
		const TopAbs_Orientation	Or2,
		const Standard_Real	Fleche,
		const Standard_Real	TolGuide,
		Standard_Real &	First,
		Standard_Real &	Last,
		const Standard_Boolean	Inside,
		const Standard_Boolean	Appro,
		const Standard_Boolean	Forward,
		const Standard_Boolean	RecP,
		const Standard_Boolean	RecS,
		const Standard_Boolean	RecRst,
		const math_Vector &	Soldep
	)

overrideprotectedvirtual

Reimplemented from ChFi3d_Builder.

◆ SimulSurf() [3/4]

virtual void ChFi3d_FilBuilder::SimulSurf	(	Handle< ChFiDS_SurfData > &	Data,
		const Handle< ChFiDS_ElSpine > &	Guide,
		const Handle< ChFiDS_Spine > &	Spine,
		const Standard_Integer	Choix,
		const Handle< BRepAdaptor_Surface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const TopAbs_Orientation	Or1,
		const Handle< BRepAdaptor_Surface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I2,
		const Handle< BRepAdaptor_Curve2d > &	PC2,
		const Handle< BRepAdaptor_Surface > &	Sref2,
		const Handle< BRepAdaptor_Curve2d > &	PCref2,
		Standard_Boolean &	Decroch2,
		const Standard_Real	Fleche,
		const Standard_Real	TolGuide,
		Standard_Real &	First,
		Standard_Real &	Last,
		const Standard_Boolean	Inside,
		const Standard_Boolean	Appro,
		const Standard_Boolean	Forward,
		const Standard_Boolean	RecP,
		const Standard_Boolean	RecS,
		const Standard_Boolean	RecRst,
		const math_Vector &	Soldep
	)

overrideprotectedvirtual

Reimplemented from ChFi3d_Builder.

◆ SimulSurf() [4/4]

virtual void ChFi3d_FilBuilder::SimulSurf	(	Handle< ChFiDS_SurfData > &	Data,
		const Handle< ChFiDS_ElSpine > &	Guide,
		const Handle< ChFiDS_Spine > &	Spine,
		const Standard_Integer	Choix,
		const Handle< BRepAdaptor_Surface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const Handle< BRepAdaptor_Curve2d > &	PC1,
		const Handle< BRepAdaptor_Surface > &	Sref1,
		const Handle< BRepAdaptor_Curve2d > &	PCref1,
		Standard_Boolean &	Decroch1,
		const TopAbs_Orientation	Or1,
		const Handle< BRepAdaptor_Surface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I2,
		const Handle< BRepAdaptor_Curve2d > &	PC2,
		const Handle< BRepAdaptor_Surface > &	Sref2,
		const Handle< BRepAdaptor_Curve2d > &	PCref2,
		Standard_Boolean &	Decroch2,
		const TopAbs_Orientation	Or2,
		const Standard_Real	Fleche,
		const Standard_Real	TolGuide,
		Standard_Real &	First,
		Standard_Real &	Last,
		const Standard_Boolean	Inside,
		const Standard_Boolean	Appro,
		const Standard_Boolean	Forward,
		const Standard_Boolean	RecP1,
		const Standard_Boolean	RecRst1,
		const Standard_Boolean	RecP2,
		const Standard_Boolean	RecRst2,
		const math_Vector &	Soldep
	)

overrideprotectedvirtual

Reimplemented from ChFi3d_Builder.

◆ SplitSurf()

void ChFi3d_FilBuilder::SplitSurf	(	ChFiDS_SequenceOfSurfData &	SeqData,
		const Handle< BRepBlend_Line > &	line
	)

protected

Method to split an singular SurfData in several non singular SurfData..

◆ UnSet() [1/2]

void ChFi3d_FilBuilder::UnSet	(	const Standard_Integer	IC,
		const TopoDS_Edge &	E
	)

Extracts the flag constant and the vector of edge E.

◆ UnSet() [2/2]

void ChFi3d_FilBuilder::UnSet	(	const Standard_Integer	IC,
		const TopoDS_Vertex &	V
	)

Extracts the vector of the vertex V.

The documentation for this class was generated from the following file:

ChFi3d_FilBuilder.hxx

Additional Inherited Members
Protected Attributes inherited from ChFi3d_Builder
Standard_Real	tolappangle

Standard_Real	tolesp

Standard_Real	tol2d

Standard_Real	tolapp3d

Standard_Real	tolapp2d

Standard_Real	fleche

GeomAbs_Shape	myConti

ChFiDS_Map	myEFMap

ChFiDS_Map	myESoMap

ChFiDS_Map	myEShMap

ChFiDS_Map	myVFMap

ChFiDS_Map	myVEMap

Handle< TopOpeBRepDS_HDataStructure >	myDS

Handle< TopOpeBRepBuild_HBuilder >	myCoup

ChFiDS_ListOfStripe	myListStripe

ChFiDS_StripeMap	myVDataMap

ChFiDS_Regularities	myRegul

ChFiDS_ListOfStripe	badstripes

TopTools_ListOfShape	badvertices

TopTools_DataMapOfShapeListOfInteger	myEVIMap

TopTools_DataMapOfShapeShape	myEdgeFirstFace

Standard_Boolean	done

Standard_Boolean	hasresult

Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ChFi3d_FilBuilder()

Member Function Documentation

◆ Add() [1/2]

◆ Add() [2/2]

◆ ExtentOneCorner()

◆ ExtentThreeCorner()

◆ ExtentTwoCorner()

◆ GetBounds()

◆ GetFilletShape()

◆ GetLaw()

◆ IsConstant() [1/2]

◆ IsConstant() [2/2]

◆ NbSurf()

◆ PerformFirstSection()

◆ PerformSurf() [1/4]

◆ PerformSurf() [2/4]

◆ PerformSurf() [3/4]

◆ PerformSurf() [4/4]

◆ PerformThreeCorner()

◆ PerformTwoCorner()

◆ Radius() [1/2]

◆ Radius() [2/2]

◆ ResetContour()

◆ Sect()

◆ SetFilletShape()

◆ SetLaw()

◆ SetRadius() [1/4]

◆ SetRadius() [2/4]

◆ SetRadius() [3/4]

◆ SetRadius() [4/4]

◆ SetRegul()

◆ Simulate()

◆ SimulKPart()

◆ SimulSurf() [1/4]

◆ SimulSurf() [2/4]

◆ SimulSurf() [3/4]

◆ SimulSurf() [4/4]

◆ SplitSurf()

◆ UnSet() [1/2]

◆ UnSet() [2/2]