Open CASCADE Technology  7.7.0
Static Public Member Functions
DsgPrs_AnglePresentation Class Reference

A framework for displaying angles. More...

#include <DsgPrs_AnglePresentation.hxx>

Static Public Member Functions

static void Add (const Handle< Prs3d_Presentation > &aPresentation, const Handle< Prs3d_Drawer > &aDrawer, const Standard_Real aVal, const TCollection_ExtendedString &aText, const gp_Circ &aCircle, const gp_Pnt &aPosition, const gp_Pnt &Apex, const gp_Circ &VminCircle, const gp_Circ &VmaxCircle, const Standard_Real aArrowSize)
 Draws the presenation of the full angle of a cone. VminCircle - a circle at V parameter = Vmin VmaxCircle - a circle at V parameter = Vmax aCircle - a circle at V parameter from projection of aPosition to axis of the cone. More...
 
static void Add (const Handle< Prs3d_Presentation > &aPresentation, const Handle< Prs3d_Drawer > &aDrawer, const Standard_Real theval, const gp_Pnt &CenterPoint, const gp_Pnt &AttachmentPoint1, const gp_Pnt &AttachmentPoint2, const gp_Dir &dir1, const gp_Dir &dir2, const gp_Pnt &OffsetPoint)
 Draws the representation of the angle defined by dir1 and dir2, centered on CenterPoint, using the offset point OffsetPoint. Lines are drawn to points AttachmentPoint1 and AttachmentPoint2. More...
 
static void Add (const Handle< Prs3d_Presentation > &aPresentation, const Handle< Prs3d_Drawer > &aDrawer, const Standard_Real theval, const TCollection_ExtendedString &thevalstring, const gp_Pnt &CenterPoint, const gp_Pnt &AttachmentPoint1, const gp_Pnt &AttachmentPoint2, const gp_Dir &dir1, const gp_Dir &dir2, const gp_Pnt &OffsetPoint)
 Same as above, but <thevalstring> contains conversion in Session units.... More...
 
static void Add (const Handle< Prs3d_Presentation > &aPresentation, const Handle< Prs3d_Drawer > &aDrawer, const Standard_Real theval, const TCollection_ExtendedString &thevalstring, const gp_Pnt &CenterPoint, const gp_Pnt &AttachmentPoint1, const gp_Pnt &AttachmentPoint2, const gp_Dir &dir1, const gp_Dir &dir2, const gp_Pnt &OffsetPoint, const DsgPrs_ArrowSide ArrowSide)
 Same as above, may add one or two Arrows according to <ArrowSide> value. More...
 
static void Add (const Handle< Prs3d_Presentation > &aPresentation, const Handle< Prs3d_Drawer > &aDrawer, const Standard_Real theval, const TCollection_ExtendedString &thevalstring, const gp_Pnt &CenterPoint, const gp_Pnt &AttachmentPoint1, const gp_Pnt &AttachmentPoint2, const gp_Dir &dir1, const gp_Dir &dir2, const gp_Dir &axisdir, const gp_Pnt &OffsetPoint)
 Same as above, but axisdir contains the axis direction useful for Revol that can be opened with 180 degrees. More...
 
static void Add (const Handle< Prs3d_Presentation > &aPresentation, const Handle< Prs3d_Drawer > &aDrawer, const Standard_Real theval, const TCollection_ExtendedString &thevalstring, const gp_Pnt &CenterPoint, const gp_Pnt &AttachmentPoint1, const gp_Pnt &AttachmentPoint2, const gp_Dir &dir1, const gp_Dir &dir2, const gp_Dir &axisdir, const Standard_Boolean isPlane, const gp_Ax1 &AxisOfSurf, const gp_Pnt &OffsetPoint, const DsgPrs_ArrowSide ArrowSide)
 Same as above,may add one or two Arrows according to <ArrowSide> value. More...
 
static void Add (const Handle< Prs3d_Presentation > &aPresentation, const Handle< Prs3d_Drawer > &aDrawer, const Standard_Real theval, const gp_Pnt &theCenter, const gp_Pnt &AttachmentPoint1, const gp_Ax1 &theAxe, const DsgPrs_ArrowSide ArrowSide)
 simple representation of a poor lonesome angle dimension Draw a line from <theCenter> to <AttachmentPoint1>, then operates a rotation around the perpmay add one or two Arrows according to <ArrowSide> value. The attributes (color,arrowsize,...) are driven by the Drawer. More...
 

Detailed Description

A framework for displaying angles.

Member Function Documentation

◆ Add() [1/7]

static void DsgPrs_AnglePresentation::Add ( const Handle< Prs3d_Presentation > &  aPresentation,
const Handle< Prs3d_Drawer > &  aDrawer,
const Standard_Real  aVal,
const TCollection_ExtendedString aText,
const gp_Circ aCircle,
const gp_Pnt aPosition,
const gp_Pnt Apex,
const gp_Circ VminCircle,
const gp_Circ VmaxCircle,
const Standard_Real  aArrowSize 
)
static

Draws the presenation of the full angle of a cone. VminCircle - a circle at V parameter = Vmin VmaxCircle - a circle at V parameter = Vmax aCircle - a circle at V parameter from projection of aPosition to axis of the cone.

◆ Add() [2/7]

static void DsgPrs_AnglePresentation::Add ( const Handle< Prs3d_Presentation > &  aPresentation,
const Handle< Prs3d_Drawer > &  aDrawer,
const Standard_Real  theval,
const gp_Pnt CenterPoint,
const gp_Pnt AttachmentPoint1,
const gp_Pnt AttachmentPoint2,
const gp_Dir dir1,
const gp_Dir dir2,
const gp_Pnt OffsetPoint 
)
static

Draws the representation of the angle defined by dir1 and dir2, centered on CenterPoint, using the offset point OffsetPoint. Lines are drawn to points AttachmentPoint1 and AttachmentPoint2.

◆ Add() [3/7]

static void DsgPrs_AnglePresentation::Add ( const Handle< Prs3d_Presentation > &  aPresentation,
const Handle< Prs3d_Drawer > &  aDrawer,
const Standard_Real  theval,
const TCollection_ExtendedString thevalstring,
const gp_Pnt CenterPoint,
const gp_Pnt AttachmentPoint1,
const gp_Pnt AttachmentPoint2,
const gp_Dir dir1,
const gp_Dir dir2,
const gp_Pnt OffsetPoint 
)
static

Same as above, but <thevalstring> contains conversion in Session units....

◆ Add() [4/7]

static void DsgPrs_AnglePresentation::Add ( const Handle< Prs3d_Presentation > &  aPresentation,
const Handle< Prs3d_Drawer > &  aDrawer,
const Standard_Real  theval,
const TCollection_ExtendedString thevalstring,
const gp_Pnt CenterPoint,
const gp_Pnt AttachmentPoint1,
const gp_Pnt AttachmentPoint2,
const gp_Dir dir1,
const gp_Dir dir2,
const gp_Pnt OffsetPoint,
const DsgPrs_ArrowSide  ArrowSide 
)
static

Same as above, may add one or two Arrows according to <ArrowSide> value.

◆ Add() [5/7]

static void DsgPrs_AnglePresentation::Add ( const Handle< Prs3d_Presentation > &  aPresentation,
const Handle< Prs3d_Drawer > &  aDrawer,
const Standard_Real  theval,
const TCollection_ExtendedString thevalstring,
const gp_Pnt CenterPoint,
const gp_Pnt AttachmentPoint1,
const gp_Pnt AttachmentPoint2,
const gp_Dir dir1,
const gp_Dir dir2,
const gp_Dir axisdir,
const gp_Pnt OffsetPoint 
)
static

Same as above, but axisdir contains the axis direction useful for Revol that can be opened with 180 degrees.

◆ Add() [6/7]

static void DsgPrs_AnglePresentation::Add ( const Handle< Prs3d_Presentation > &  aPresentation,
const Handle< Prs3d_Drawer > &  aDrawer,
const Standard_Real  theval,
const TCollection_ExtendedString thevalstring,
const gp_Pnt CenterPoint,
const gp_Pnt AttachmentPoint1,
const gp_Pnt AttachmentPoint2,
const gp_Dir dir1,
const gp_Dir dir2,
const gp_Dir axisdir,
const Standard_Boolean  isPlane,
const gp_Ax1 AxisOfSurf,
const gp_Pnt OffsetPoint,
const DsgPrs_ArrowSide  ArrowSide 
)
static

Same as above,may add one or two Arrows according to <ArrowSide> value.

◆ Add() [7/7]

static void DsgPrs_AnglePresentation::Add ( const Handle< Prs3d_Presentation > &  aPresentation,
const Handle< Prs3d_Drawer > &  aDrawer,
const Standard_Real  theval,
const gp_Pnt theCenter,
const gp_Pnt AttachmentPoint1,
const gp_Ax1 theAxe,
const DsgPrs_ArrowSide  ArrowSide 
)
static

simple representation of a poor lonesome angle dimension Draw a line from <theCenter> to <AttachmentPoint1>, then operates a rotation around the perpmay add one or two Arrows according to <ArrowSide> value. The attributes (color,arrowsize,...) are driven by the Drawer.


The documentation for this class was generated from the following file: