Geom2dHatch_Intersector Class Reference

#include <Geom2dHatch_Intersector.hxx>

Inheritance diagram for Geom2dHatch_Intersector:

Public Member Functions
	Geom2dHatch_Intersector (const Standard_Real Confusion, const Standard_Real Tangency)
	Creates an intersector. More...
Standard_Real	ConfusionTolerance () const
	Returns the confusion tolerance of the intersector. More...
void	SetConfusionTolerance (const Standard_Real Confusion)
	Sets the confusion tolerance of the intersector. More...
Standard_Real	TangencyTolerance () const
	Returns the tangency tolerance of the intersector. More...
void	SetTangencyTolerance (const Standard_Real Tangency)
	Sets the tangency tolerance of the intersector. More...
void	Intersect (const Geom2dAdaptor_Curve &C1, const Geom2dAdaptor_Curve &C2)
	Intersects the curves C1 and C2. The results are retrieved by the usual methods described in IntRes2d_Intersection. Creates an intersector. More...
	Geom2dHatch_Intersector ()
void	Perform (const gp_Lin2d &L, const Standard_Real P, const Standard_Real Tol, const Geom2dAdaptor_Curve &E)
	Performs the intersection between the 2d line segment (<L>,. More...
void	LocalGeometry (const Geom2dAdaptor_Curve &E, const Standard_Real U, gp_Dir2d &T, gp_Dir2d &N, Standard_Real &C) const
	Returns in <T>, <N> and the tangent, normal and curvature of the edge <E> at parameter value <U>. More...
Public Member Functions inherited from Geom2dInt_GInter
	Geom2dInt_GInter ()
	Empty constructor. More...
	Geom2dInt_GInter (const Adaptor2d_Curve2d &C, const Standard_Real TolConf, const Standard_Real Tol)
	Self Intersection of a curve. More...
	Geom2dInt_GInter (const Adaptor2d_Curve2d &C, const IntRes2d_Domain &D, const Standard_Real TolConf, const Standard_Real Tol)
	Self Intersection of a curve with a domain. More...
	Geom2dInt_GInter (const Adaptor2d_Curve2d &C1, const Adaptor2d_Curve2d &C2, const Standard_Real TolConf, const Standard_Real Tol)
	Intersection between 2 curves. More...
	Geom2dInt_GInter (const Adaptor2d_Curve2d &C1, const IntRes2d_Domain &D1, const Adaptor2d_Curve2d &C2, const Standard_Real TolConf, const Standard_Real Tol)
	Intersection between 2 curves. More...
	Geom2dInt_GInter (const Adaptor2d_Curve2d &C1, const Adaptor2d_Curve2d &C2, const IntRes2d_Domain &D2, const Standard_Real TolConf, const Standard_Real Tol)
	Intersection between 2 curves. More...
	Geom2dInt_GInter (const Adaptor2d_Curve2d &C1, const IntRes2d_Domain &D1, const Adaptor2d_Curve2d &C2, const IntRes2d_Domain &D2, const Standard_Real TolConf, const Standard_Real Tol)
	Intersection between 2 curves. More...
void	Perform (const Adaptor2d_Curve2d &C1, const IntRes2d_Domain &D1, const Adaptor2d_Curve2d &C2, const IntRes2d_Domain &D2, const Standard_Real TolConf, const Standard_Real Tol)
	Intersection between 2 curves. More...
void	Perform (const Adaptor2d_Curve2d &C1, const Adaptor2d_Curve2d &C2, const Standard_Real TolConf, const Standard_Real Tol)
	Intersection between 2 curves. More...
void	Perform (const Adaptor2d_Curve2d &C1, const IntRes2d_Domain &D1, const Standard_Real TolConf, const Standard_Real Tol)
	Intersection between 2 curves. More...
void	Perform (const Adaptor2d_Curve2d &C1, const Standard_Real TolConf, const Standard_Real Tol)
	Intersection between 2 curves. More...
void	Perform (const Adaptor2d_Curve2d &C1, const IntRes2d_Domain &D1, const Adaptor2d_Curve2d &C2, const Standard_Real TolConf, const Standard_Real Tol)
	Intersection between 2 curves. More...
void	Perform (const Adaptor2d_Curve2d &C1, const Adaptor2d_Curve2d &C2, const IntRes2d_Domain &D2, const Standard_Real TolConf, const Standard_Real Tol)
	Intersection between 2 curves. More...
IntRes2d_Domain	ComputeDomain (const Adaptor2d_Curve2d &C1, const Standard_Real TolDomain) const
	Create a domain from a curve. More...
void	SetMinNbSamples (const Standard_Integer theMinNbSamples)
	Set / get minimum number of points in polygon intersection. More...
Standard_Integer	GetMinNbSamples () const
Public Member Functions inherited from IntRes2d_Intersection
Standard_Boolean	IsDone () const
	returns TRUE when the computation was successful. More...
Standard_Boolean	IsEmpty () const
	Returns TRUE if there is no intersection between the given arguments. The exception NotDone is raised if IsDone returns FALSE. More...
Standard_Integer	NbPoints () const
	This function returns the number of intersection points between the 2 curves. The exception NotDone is raised if IsDone returns FALSE. More...
const IntRes2d_IntersectionPoint &	Point (const Standard_Integer N) const
	This function returns the intersection point of range N; The exception NotDone is raised if IsDone returns FALSE. The exception OutOfRange is raised if (N <= 0) or (N > NbPoints). More...
Standard_Integer	NbSegments () const
	This function returns the number of intersection segments between the two curves. The exception NotDone is raised if IsDone returns FALSE. More...
const IntRes2d_IntersectionSegment &	Segment (const Standard_Integer N) const
	This function returns the intersection segment of range N; The exception NotDone is raised if IsDone returns FALSE. The exception OutOfRange is raised if (N <= 0) or (N > NbPoints). More...
void	SetReversedParameters (const Standard_Boolean Reverseflag)

Additional Inherited Members
Protected Member Functions inherited from IntRes2d_Intersection
	IntRes2d_Intersection ()
	Empty constructor. More...
	IntRes2d_Intersection (const IntRes2d_Intersection &Other)
IntRes2d_Intersection &	operator= (const IntRes2d_Intersection &theOther)
	Assignment. More...
	~IntRes2d_Intersection ()
	Destructor is protected, for safe inheritance. More...
void	SetValues (const IntRes2d_Intersection &Inter)
void	Append (const IntRes2d_Intersection &Inter, const Standard_Real FirstParam1, const Standard_Real LastParam1, const Standard_Real FirstParam2, const Standard_Real LastParam2)
void	Append (const IntRes2d_IntersectionSegment &Seg)
void	Append (const IntRes2d_IntersectionPoint &Pnt)
void	Insert (const IntRes2d_IntersectionPoint &Pnt)
void	ResetFields ()
Standard_Boolean	ReversedParameters () const
Protected Attributes inherited from IntRes2d_Intersection
IntRes2d_SequenceOfIntersectionPoint	lpnt
IntRes2d_SequenceOfIntersectionSegment	lseg
Standard_Boolean	done
Standard_Boolean	reverse

Constructor & Destructor Documentation

Geom2dHatch_Intersector() [1/2]

Geom2dHatch_Intersector::Geom2dHatch_Intersector	(	const Standard_Real	Confusion,
		const Standard_Real	Tangency
	)

Creates an intersector.

Geom2dHatch_Intersector() [2/2]

Geom2dHatch_Intersector::Geom2dHatch_Intersector

(

)

Member Function Documentation

ConfusionTolerance()

Standard_Real Geom2dHatch_Intersector::ConfusionTolerance

(

)

const

Returns the confusion tolerance of the intersector.

Intersect()

void Geom2dHatch_Intersector::Intersect	(	const Geom2dAdaptor_Curve &	C1,
		const Geom2dAdaptor_Curve &	C2
	)

Intersects the curves C1 and C2. The results are retrieved by the usual methods described in IntRes2d_Intersection. Creates an intersector.

LocalGeometry()

void Geom2dHatch_Intersector::LocalGeometry	(	const Geom2dAdaptor_Curve &	E,
		const Standard_Real	U,
		gp_Dir2d &	T,
		gp_Dir2d &	N,
		Standard_Real &	C
	)		const

Returns in <T>, <N> and the tangent, normal and curvature of the edge <E> at parameter value <U>.

Perform()

void Geom2dHatch_Intersector::Perform	(	const gp_Lin2d &	L,
		const Standard_Real	P,
		const Standard_Real	Tol,
		const Geom2dAdaptor_Curve &	E
	)

Performs the intersection between the 2d line segment (<L>,.

) and the Curve <E>. The line segment is the part of the 2d line <L> of parameter range [0,

] (P is positive and can be RealLast()). Tol is the Tolerance on the segment. The order is relevant, the first argument is the segment, the second the Edge.

SetConfusionTolerance()

void Geom2dHatch_Intersector::SetConfusionTolerance

(

const Standard_Real

Confusion

)

Sets the confusion tolerance of the intersector.

SetTangencyTolerance()

void Geom2dHatch_Intersector::SetTangencyTolerance

(

const Standard_Real

Tangency

)

Sets the tangency tolerance of the intersector.

TangencyTolerance()

Standard_Real Geom2dHatch_Intersector::TangencyTolerance

(

)

const

Returns the tangency tolerance of the intersector.

---

The documentation for this class was generated from the following file:

• Geom2dHatch_Intersector.hxx