Open CASCADE Technology  7.7.0
Public Member Functions | Static Public Member Functions
Geom_BezierSurface Class Reference

Describes a rational or non-rational Bezier surface. More...

#include <Geom_BezierSurface.hxx>

Inheritance diagram for Geom_BezierSurface:
Inheritance graph
[legend]

Public Member Functions

 Geom_BezierSurface (const TColgp_Array2OfPnt &SurfacePoles)
 Creates a non-rational Bezier surface with a set of poles. Control points representation : SPoles(Uorigin,Vorigin) ...................SPoles(Uorigin,Vend) . . . . SPoles(Uend, Vorigin) .....................SPoles(Uend, Vend) For the double array the row indice corresponds to the parametric U direction and the columns indice corresponds to the parametric V direction. The weights are defaulted to all being 1. More...
 
 Geom_BezierSurface (const TColgp_Array2OfPnt &SurfacePoles, const TColStd_Array2OfReal &PoleWeights)
 —Purpose Creates a rational Bezier surface with a set of poles and a set of weights. For the double array the row indice corresponds to the parametric U direction and the columns indice corresponds to the parametric V direction. If all the weights are identical the surface is considered as non-rational (the tolerance criterion is Resolution from package gp). More...
 
void ExchangeUV ()
 Exchanges the direction U and V on a Bezier surface As a consequence: More...
 
void Increase (const Standard_Integer UDeg, const Standard_Integer VDeg)
 Increases the degree of this Bezier surface in the two parametric directions. More...
 
void InsertPoleColAfter (const Standard_Integer VIndex, const TColgp_Array1OfPnt &CPoles)
 Inserts a column of poles. If the surface is rational the weights values associated with CPoles are equal defaulted to 1. More...
 
void InsertPoleColAfter (const Standard_Integer VIndex, const TColgp_Array1OfPnt &CPoles, const TColStd_Array1OfReal &CPoleWeights)
 Inserts a column of poles and weights. If the surface was non-rational it can become rational. More...
 
void InsertPoleColBefore (const Standard_Integer VIndex, const TColgp_Array1OfPnt &CPoles)
 Inserts a column of poles. If the surface is rational the weights values associated with CPoles are equal defaulted to 1. More...
 
void InsertPoleColBefore (const Standard_Integer VIndex, const TColgp_Array1OfPnt &CPoles, const TColStd_Array1OfReal &CPoleWeights)
 Inserts a column of poles and weights. If the surface was non-rational it can become rational. More...
 
void InsertPoleRowAfter (const Standard_Integer UIndex, const TColgp_Array1OfPnt &CPoles)
 Inserts a row of poles. If the surface is rational the weights values associated with CPoles are equal defaulted to 1. More...
 
void InsertPoleRowAfter (const Standard_Integer UIndex, const TColgp_Array1OfPnt &CPoles, const TColStd_Array1OfReal &CPoleWeights)
 Inserts a row of poles and weights. If the surface was non-rational it can become rational. More...
 
void InsertPoleRowBefore (const Standard_Integer UIndex, const TColgp_Array1OfPnt &CPoles)
 Inserts a row of poles. If the surface is rational the weights values associated with CPoles are equal defaulted to 1. More...
 
void InsertPoleRowBefore (const Standard_Integer UIndex, const TColgp_Array1OfPnt &CPoles, const TColStd_Array1OfReal &CPoleWeights)
 Inserts a row of poles and weights. If the surface was non-rational it can become rational. More...
 
void RemovePoleCol (const Standard_Integer VIndex)
 Removes a column of poles. If the surface was rational it can become non-rational. More...
 
void RemovePoleRow (const Standard_Integer UIndex)
 Removes a row of poles. If the surface was rational it can become non-rational. More...
 
void Segment (const Standard_Real U1, const Standard_Real U2, const Standard_Real V1, const Standard_Real V2)
 Modifies this Bezier surface by segmenting it between U1 and U2 in the u parametric direction, and between V1 and V2 in the v parametric direction. U1, U2, V1, and V2 can be outside the bounds of this surface. More...
 
void SetPole (const Standard_Integer UIndex, const Standard_Integer VIndex, const gp_Pnt &P)
 Modifies a pole value. If the surface is rational the weight of range (UIndex, VIndex) is not modified. More...
 
void SetPole (const Standard_Integer UIndex, const Standard_Integer VIndex, const gp_Pnt &P, const Standard_Real Weight)
 Substitutes the pole and the weight of range UIndex, VIndex. If the surface <me> is not rational it can become rational. if the surface was rational it can become non-rational. More...
 
void SetPoleCol (const Standard_Integer VIndex, const TColgp_Array1OfPnt &CPoles)
 Modifies a column of poles. The length of CPoles can be lower but not greater than NbUPoles so you can modify just a part of the column. Raised if VIndex < 1 or VIndex > NbVPoles. More...
 
void SetPoleCol (const Standard_Integer VIndex, const TColgp_Array1OfPnt &CPoles, const TColStd_Array1OfReal &CPoleWeights)
 Modifies a column of poles. If the surface was rational it can become non-rational If the surface was non-rational it can become rational. The length of CPoles can be lower but not greater than NbUPoles so you can modify just a part of the column. Raised if VIndex < 1 or VIndex > NbVPoles. More...
 
void SetPoleRow (const Standard_Integer UIndex, const TColgp_Array1OfPnt &CPoles)
 Modifies a row of poles. The length of CPoles can be lower but not greater than NbVPoles so you can modify just a part of the row. Raised if UIndex < 1 or UIndex > NbUPoles. More...
 
void SetPoleRow (const Standard_Integer UIndex, const TColgp_Array1OfPnt &CPoles, const TColStd_Array1OfReal &CPoleWeights)
 Modifies a row of poles and weights. If the surface was rational it can become non-rational. If the surface was non-rational it can become rational. The length of CPoles can be lower but not greater than NbVPoles so you can modify just a part of the row. Raised if UIndex < 1 or UIndex > NbUPoles. More...
 
void SetWeight (const Standard_Integer UIndex, const Standard_Integer VIndex, const Standard_Real Weight)
 Modifies the weight of the pole of range UIndex, VIndex. If the surface was non-rational it can become rational. If the surface was rational it can become non-rational. More...
 
void SetWeightCol (const Standard_Integer VIndex, const TColStd_Array1OfReal &CPoleWeights)
 Modifies a column of weights. If the surface was rational it can become non-rational. If the surface was non-rational it can become rational. The length of CPoleWeights can be lower but not greater than NbUPoles. Raised if VIndex < 1 or VIndex > NbVPoles. More...
 
void SetWeightRow (const Standard_Integer UIndex, const TColStd_Array1OfReal &CPoleWeights)
 Modifies a row of weights. If the surface was rational it can become non-rational. If the surface was non-rational it can become rational. The length of CPoleWeights can be lower but not greater than NbVPoles. Raised if UIndex < 1 or UIndex > NbUPoles. More...
 
void UReverse () override
 Changes the orientation of this Bezier surface in the u parametric direction. The bounds of the surface are not changed, but the given parametric direction is reversed. Hence, the orientation of the surface is reversed. More...
 
Standard_Real UReversedParameter (const Standard_Real U) const override
 Computes the u (or v) parameter on the modified surface, produced by reversing its u (or v) parametric direction, for any point of u parameter U (or of v parameter V) on this Bezier surface. In the case of a Bezier surface, these functions return respectively: More...
 
void VReverse () override
 Changes the orientation of this Bezier surface in the v parametric direction. The bounds of the surface are not changed, but the given parametric direction is reversed. Hence, the orientation of the surface is reversed. More...
 
Standard_Real VReversedParameter (const Standard_Real V) const override
 Computes the u (or v) parameter on the modified surface, produced by reversing its u (or v) parametric direction, for any point of u parameter U (or of v parameter V) on this Bezier surface. In the case of a Bezier surface, these functions return respectively: More...
 
void Bounds (Standard_Real &U1, Standard_Real &U2, Standard_Real &V1, Standard_Real &V2) const override
 Returns the parametric bounds U1, U2, V1 and V2 of this Bezier surface. In the case of a Bezier surface, this function returns U1 = 0, V1 = 0, U2 = 1, V2 = 1. More...
 
GeomAbs_Shape Continuity () const override
 Returns the continuity of the surface CN : the order of continuity is infinite. More...
 
void D0 (const Standard_Real U, const Standard_Real V, gp_Pnt &P) const override
 Computes the point of parameter U,V on the surface. More...
 
void D1 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V) const override
 Computes the point P and the first derivatives in the directions U and V at this point. Raised if the continuity of the surface is not C1. More...
 
void D2 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV) const override
 Computes the point P, the first and the second derivatives in the directions U and V at this point. Raised if the continuity of the surface is not C2. More...
 
void D3 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV, gp_Vec &D3U, gp_Vec &D3V, gp_Vec &D3UUV, gp_Vec &D3UVV) const override
 Computes P, the point of parameters (U, V) of this Bezier surface, and. More...
 
gp_Vec DN (const Standard_Real U, const Standard_Real V, const Standard_Integer Nu, const Standard_Integer Nv) const override
 Computes the derivative of order Nu in the u parametric direction, and Nv in the v parametric direction, at the point of parameters (U, V) of this Bezier surface. Note: The parameters U and V can be outside the bounds of the surface. Exceptions Standard_RangeError if: More...
 
Standard_Integer NbUPoles () const
 Returns the number of poles in the U direction. More...
 
Standard_Integer NbVPoles () const
 Returns the number of poles in the V direction. More...
 
const gp_PntPole (const Standard_Integer UIndex, const Standard_Integer VIndex) const
 Returns the pole of range UIndex, VIndex Raised if UIndex < 1 or UIndex > NbUPoles, or VIndex < 1 or VIndex > NbVPoles. More...
 
void Poles (TColgp_Array2OfPnt &P) const
 Returns the poles of the Bezier surface. More...
 
const TColgp_Array2OfPntPoles () const
 Returns the poles of the Bezier surface. More...
 
Standard_Integer UDegree () const
 Returns the degree of the surface in the U direction it is NbUPoles - 1. More...
 
Handle< Geom_CurveUIso (const Standard_Real U) const override
 Computes the U isoparametric curve. For a Bezier surface the UIso curve is a Bezier curve. More...
 
Standard_Integer VDegree () const
 Returns the degree of the surface in the V direction it is NbVPoles - 1. More...
 
Handle< Geom_CurveVIso (const Standard_Real V) const override
 Computes the V isoparametric curve. For a Bezier surface the VIso curve is a Bezier curve. More...
 
Standard_Real Weight (const Standard_Integer UIndex, const Standard_Integer VIndex) const
 Returns the weight of range UIndex, VIndex. More...
 
void Weights (TColStd_Array2OfReal &W) const
 Returns the weights of the Bezier surface. More...
 
const TColStd_Array2OfRealWeights () const
 Returns the weights of the Bezier surface. More...
 
Standard_Boolean IsUClosed () const override
 Returns True if the first control points row and the last control points row are identical. The tolerance criterion is Resolution from package gp. More...
 
Standard_Boolean IsVClosed () const override
 Returns True if the first control points column and the last control points column are identical. The tolerance criterion is Resolution from package gp. More...
 
Standard_Boolean IsCNu (const Standard_Integer N) const override
 Returns True, a Bezier surface is always CN. More...
 
Standard_Boolean IsCNv (const Standard_Integer N) const override
 Returns True, a BezierSurface is always CN. More...
 
Standard_Boolean IsUPeriodic () const override
 Returns False. More...
 
Standard_Boolean IsVPeriodic () const override
 Returns False. More...
 
Standard_Boolean IsURational () const
 Returns False if the weights are identical in the U direction, The tolerance criterion is Resolution from package gp. Example : |1.0, 1.0, 1.0| if Weights = |0.5, 0.5, 0.5| returns False |2.0, 2.0, 2.0|. More...
 
Standard_Boolean IsVRational () const
 Returns False if the weights are identical in the V direction, The tolerance criterion is Resolution from package gp. Example : |1.0, 2.0, 0.5| if Weights = |1.0, 2.0, 0.5| returns False |1.0, 2.0, 0.5|. More...
 
void Transform (const gp_Trsf &T) override
 Applies the transformation T to this Bezier surface. More...
 
void Resolution (const Standard_Real Tolerance3D, Standard_Real &UTolerance, Standard_Real &VTolerance)
 Computes two tolerance values for this Bezier surface, based on the given tolerance in 3D space Tolerance3D. The tolerances computed are: More...
 
Handle< Geom_GeometryCopy () const override
 Creates a new object which is a copy of this Bezier surface. More...
 
virtual void DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const override
 Dumps the content of me into the stream. More...
 
- Public Member Functions inherited from Geom_Surface
Handle< Geom_SurfaceUReversed () const
 Reverses the U direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
 
Handle< Geom_SurfaceVReversed () const
 Reverses the V direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
 
virtual void TransformParameters (Standard_Real &U, Standard_Real &V, const gp_Trsf &T) const
 Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>. More...
 
virtual gp_GTrsf2d ParametricTransformation (const gp_Trsf &T) const
 Returns a 2d transformation used to find the new parameters of a point on the transformed surface. More...
 
virtual Standard_Real UPeriod () const
 Returns the period of this surface in the u parametric direction. Raises if the surface is not uperiodic. More...
 
virtual Standard_Real VPeriod () const
 Returns the period of this surface in the v parametric direction. raises if the surface is not vperiodic. More...
 
gp_Pnt Value (const Standard_Real U, const Standard_Real V) const
 Computes the point of parameter (U, V) on the surface. More...
 
- Public Member Functions inherited from Geom_Geometry
void Mirror (const gp_Pnt &P)
 Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More...
 
void Mirror (const gp_Ax1 &A1)
 Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...
 
void Mirror (const gp_Ax2 &A2)
 Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More...
 
void Rotate (const gp_Ax1 &A1, const Standard_Real Ang)
 Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More...
 
void Scale (const gp_Pnt &P, const Standard_Real S)
 Scales a Geometry. S is the scaling value. More...
 
void Translate (const gp_Vec &V)
 Translates a Geometry. V is the vector of the translation. More...
 
void Translate (const gp_Pnt &P1, const gp_Pnt &P2)
 Translates a Geometry from the point P1 to the point P2. More...
 
Handle< Geom_GeometryMirrored (const gp_Pnt &P) const
 
Handle< Geom_GeometryMirrored (const gp_Ax1 &A1) const
 
Handle< Geom_GeometryMirrored (const gp_Ax2 &A2) const
 
Handle< Geom_GeometryRotated (const gp_Ax1 &A1, const Standard_Real Ang) const
 
Handle< Geom_GeometryScaled (const gp_Pnt &P, const Standard_Real S) const
 
Handle< Geom_GeometryTransformed (const gp_Trsf &T) const
 
Handle< Geom_GeometryTranslated (const gp_Vec &V) const
 
Handle< Geom_GeometryTranslated (const gp_Pnt &P1, const gp_Pnt &P2) const
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Static Public Member Functions

static Standard_Integer MaxDegree ()
 Returns the value of the maximum polynomial degree of a Bezier surface. This value is 25. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 

Detailed Description

Describes a rational or non-rational Bezier surface.

Constructor & Destructor Documentation

◆ Geom_BezierSurface() [1/2]

Geom_BezierSurface::Geom_BezierSurface ( const TColgp_Array2OfPnt SurfacePoles)

Creates a non-rational Bezier surface with a set of poles. Control points representation : SPoles(Uorigin,Vorigin) ...................SPoles(Uorigin,Vend) . . . . SPoles(Uend, Vorigin) .....................SPoles(Uend, Vend) For the double array the row indice corresponds to the parametric U direction and the columns indice corresponds to the parametric V direction. The weights are defaulted to all being 1.

Raised if the number of poles of the surface is lower than 2 or greater than MaxDegree + 1 in one of the two directions U or V.

◆ Geom_BezierSurface() [2/2]

Geom_BezierSurface::Geom_BezierSurface ( const TColgp_Array2OfPnt SurfacePoles,
const TColStd_Array2OfReal PoleWeights 
)

—Purpose Creates a rational Bezier surface with a set of poles and a set of weights. For the double array the row indice corresponds to the parametric U direction and the columns indice corresponds to the parametric V direction. If all the weights are identical the surface is considered as non-rational (the tolerance criterion is Resolution from package gp).

Raised if SurfacePoles and PoleWeights have not the same Rowlength or have not the same ColLength. Raised if PoleWeights (i, j) <= Resolution from gp; Raised if the number of poles of the surface is lower than 2 or greater than MaxDegree + 1 in one of the two directions U or V.

Member Function Documentation

◆ Bounds()

void Geom_BezierSurface::Bounds ( Standard_Real U1,
Standard_Real U2,
Standard_Real V1,
Standard_Real V2 
) const
overridevirtual

Returns the parametric bounds U1, U2, V1 and V2 of this Bezier surface. In the case of a Bezier surface, this function returns U1 = 0, V1 = 0, U2 = 1, V2 = 1.

Implements Geom_Surface.

◆ Continuity()

GeomAbs_Shape Geom_BezierSurface::Continuity ( ) const
overridevirtual

Returns the continuity of the surface CN : the order of continuity is infinite.

Implements Geom_Surface.

◆ Copy()

Handle< Geom_Geometry > Geom_BezierSurface::Copy ( ) const
overridevirtual

Creates a new object which is a copy of this Bezier surface.

Implements Geom_Geometry.

◆ D0()

void Geom_BezierSurface::D0 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P 
) const
overridevirtual

Computes the point of parameter U,V on the surface.

Raised only for an "OffsetSurface" if it is not possible to compute the current point.

Implements Geom_Surface.

◆ D1()

void Geom_BezierSurface::D1 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V 
) const
overridevirtual

Computes the point P and the first derivatives in the directions U and V at this point. Raised if the continuity of the surface is not C1.

Tip: use GeomLib::NormEstim() to calculate surface normal at specified (U, V) point.

Implements Geom_Surface.

◆ D2()

void Geom_BezierSurface::D2 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V,
gp_Vec D2U,
gp_Vec D2V,
gp_Vec D2UV 
) const
overridevirtual

Computes the point P, the first and the second derivatives in the directions U and V at this point. Raised if the continuity of the surface is not C2.

Implements Geom_Surface.

◆ D3()

void Geom_BezierSurface::D3 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V,
gp_Vec D2U,
gp_Vec D2V,
gp_Vec D2UV,
gp_Vec D3U,
gp_Vec D3V,
gp_Vec D3UUV,
gp_Vec D3UVV 
) const
overridevirtual

Computes P, the point of parameters (U, V) of this Bezier surface, and.

  • one or more of the following sets of vectors:
  • D1U and D1V, the first derivative vectors at this point,
  • D2U, D2V and D2UV, the second derivative vectors at this point,
  • D3U, D3V, D3UUV and D3UVV, the third derivative vectors at this point. Note: The parameters U and V can be outside the bounds of the surface.

Implements Geom_Surface.

◆ DN()

gp_Vec Geom_BezierSurface::DN ( const Standard_Real  U,
const Standard_Real  V,
const Standard_Integer  Nu,
const Standard_Integer  Nv 
) const
overridevirtual

Computes the derivative of order Nu in the u parametric direction, and Nv in the v parametric direction, at the point of parameters (U, V) of this Bezier surface. Note: The parameters U and V can be outside the bounds of the surface. Exceptions Standard_RangeError if:

  • Nu + Nv is less than 1, or Nu or Nv is negative.

Implements Geom_Surface.

◆ DumpJson()

virtual void Geom_BezierSurface::DumpJson ( Standard_OStream theOStream,
Standard_Integer  theDepth = -1 
) const
overridevirtual

Dumps the content of me into the stream.

Reimplemented from Geom_Surface.

◆ ExchangeUV()

void Geom_BezierSurface::ExchangeUV ( )

Exchanges the direction U and V on a Bezier surface As a consequence:

  • the poles and weights tables are transposed,
  • degrees, rational characteristics and so on are exchanged between the two parametric directions, and
  • the orientation of the surface is reversed.

◆ Increase()

void Geom_BezierSurface::Increase ( const Standard_Integer  UDeg,
const Standard_Integer  VDeg 
)

Increases the degree of this Bezier surface in the two parametric directions.

Raised if UDegree < UDegree <me> or VDegree < VDegree <me> Raised if the degree of the surface is greater than MaxDegree in one of the two directions U or V.

◆ InsertPoleColAfter() [1/2]

void Geom_BezierSurface::InsertPoleColAfter ( const Standard_Integer  VIndex,
const TColgp_Array1OfPnt CPoles 
)

Inserts a column of poles. If the surface is rational the weights values associated with CPoles are equal defaulted to 1.

Raised if Vindex < 1 or VIndex > NbVPoles.

raises if VDegree is greater than MaxDegree. raises if the Length of CPoles is not equal to NbUPoles

◆ InsertPoleColAfter() [2/2]

void Geom_BezierSurface::InsertPoleColAfter ( const Standard_Integer  VIndex,
const TColgp_Array1OfPnt CPoles,
const TColStd_Array1OfReal CPoleWeights 
)

Inserts a column of poles and weights. If the surface was non-rational it can become rational.

Raised if Vindex < 1 or VIndex > NbVPoles. Raised if . VDegree is greater than MaxDegree. . the Length of CPoles is not equal to NbUPoles . a weight value is lower or equal to Resolution from package gp

◆ InsertPoleColBefore() [1/2]

void Geom_BezierSurface::InsertPoleColBefore ( const Standard_Integer  VIndex,
const TColgp_Array1OfPnt CPoles 
)

Inserts a column of poles. If the surface is rational the weights values associated with CPoles are equal defaulted to 1.

Raised if Vindex < 1 or VIndex > NbVPoles.

Raised if VDegree is greater than MaxDegree. Raised if the Length of CPoles is not equal to NbUPoles

◆ InsertPoleColBefore() [2/2]

void Geom_BezierSurface::InsertPoleColBefore ( const Standard_Integer  VIndex,
const TColgp_Array1OfPnt CPoles,
const TColStd_Array1OfReal CPoleWeights 
)

Inserts a column of poles and weights. If the surface was non-rational it can become rational.

Raised if Vindex < 1 or VIndex > NbVPoles. Raised if : . VDegree is greater than MaxDegree. . the Length of CPoles is not equal to NbUPoles . a weight value is lower or equal to Resolution from package gp

◆ InsertPoleRowAfter() [1/2]

void Geom_BezierSurface::InsertPoleRowAfter ( const Standard_Integer  UIndex,
const TColgp_Array1OfPnt CPoles 
)

Inserts a row of poles. If the surface is rational the weights values associated with CPoles are equal defaulted to 1.

Raised if Uindex < 1 or UIndex > NbUPoles.

Raised if UDegree is greater than MaxDegree. Raised if the Length of CPoles is not equal to NbVPoles

◆ InsertPoleRowAfter() [2/2]

void Geom_BezierSurface::InsertPoleRowAfter ( const Standard_Integer  UIndex,
const TColgp_Array1OfPnt CPoles,
const TColStd_Array1OfReal CPoleWeights 
)

Inserts a row of poles and weights. If the surface was non-rational it can become rational.

Raised if Uindex < 1 or UIndex > NbUPoles. Raised if : . UDegree is greater than MaxDegree. . the Length of CPoles is not equal to NbVPoles . a weight value is lower or equal to Resolution from package gp

◆ InsertPoleRowBefore() [1/2]

void Geom_BezierSurface::InsertPoleRowBefore ( const Standard_Integer  UIndex,
const TColgp_Array1OfPnt CPoles 
)

Inserts a row of poles. If the surface is rational the weights values associated with CPoles are equal defaulted to 1.

Raised if Uindex < 1 or UIndex > NbUPoles.

Raised if UDegree is greater than MaxDegree. Raised if the Length of CPoles is not equal to NbVPoles

◆ InsertPoleRowBefore() [2/2]

void Geom_BezierSurface::InsertPoleRowBefore ( const Standard_Integer  UIndex,
const TColgp_Array1OfPnt CPoles,
const TColStd_Array1OfReal CPoleWeights 
)

Inserts a row of poles and weights. If the surface was non-rational it can become rational.

Raised if Uindex < 1 or UIndex > NbUPoles. Raised if : . UDegree is greater than MaxDegree. . the Length of CPoles is not equal to NbVPoles . a weight value is lower or equal to Resolution from pacakage gp

◆ IsCNu()

Standard_Boolean Geom_BezierSurface::IsCNu ( const Standard_Integer  N) const
overridevirtual

Returns True, a Bezier surface is always CN.

Implements Geom_Surface.

◆ IsCNv()

Standard_Boolean Geom_BezierSurface::IsCNv ( const Standard_Integer  N) const
overridevirtual

Returns True, a BezierSurface is always CN.

Implements Geom_Surface.

◆ IsUClosed()

Standard_Boolean Geom_BezierSurface::IsUClosed ( ) const
overridevirtual

Returns True if the first control points row and the last control points row are identical. The tolerance criterion is Resolution from package gp.

Implements Geom_Surface.

◆ IsUPeriodic()

Standard_Boolean Geom_BezierSurface::IsUPeriodic ( ) const
overridevirtual

Returns False.

Implements Geom_Surface.

◆ IsURational()

Standard_Boolean Geom_BezierSurface::IsURational ( ) const

Returns False if the weights are identical in the U direction, The tolerance criterion is Resolution from package gp. Example : |1.0, 1.0, 1.0| if Weights = |0.5, 0.5, 0.5| returns False |2.0, 2.0, 2.0|.

◆ IsVClosed()

Standard_Boolean Geom_BezierSurface::IsVClosed ( ) const
overridevirtual

Returns True if the first control points column and the last control points column are identical. The tolerance criterion is Resolution from package gp.

Implements Geom_Surface.

◆ IsVPeriodic()

Standard_Boolean Geom_BezierSurface::IsVPeriodic ( ) const
overridevirtual

Returns False.

Implements Geom_Surface.

◆ IsVRational()

Standard_Boolean Geom_BezierSurface::IsVRational ( ) const

Returns False if the weights are identical in the V direction, The tolerance criterion is Resolution from package gp. Example : |1.0, 2.0, 0.5| if Weights = |1.0, 2.0, 0.5| returns False |1.0, 2.0, 0.5|.

◆ MaxDegree()

static Standard_Integer Geom_BezierSurface::MaxDegree ( )
static

Returns the value of the maximum polynomial degree of a Bezier surface. This value is 25.

◆ NbUPoles()

Standard_Integer Geom_BezierSurface::NbUPoles ( ) const

Returns the number of poles in the U direction.

◆ NbVPoles()

Standard_Integer Geom_BezierSurface::NbVPoles ( ) const

Returns the number of poles in the V direction.

◆ Pole()

const gp_Pnt& Geom_BezierSurface::Pole ( const Standard_Integer  UIndex,
const Standard_Integer  VIndex 
) const

Returns the pole of range UIndex, VIndex Raised if UIndex < 1 or UIndex > NbUPoles, or VIndex < 1 or VIndex > NbVPoles.

◆ Poles() [1/2]

void Geom_BezierSurface::Poles ( TColgp_Array2OfPnt P) const

Returns the poles of the Bezier surface.

Raised if the length of P in the U an V direction is not equal to NbUPoles and NbVPoles.

◆ Poles() [2/2]

const TColgp_Array2OfPnt& Geom_BezierSurface::Poles ( ) const
inline

Returns the poles of the Bezier surface.

◆ RemovePoleCol()

void Geom_BezierSurface::RemovePoleCol ( const Standard_Integer  VIndex)

Removes a column of poles. If the surface was rational it can become non-rational.

Raised if NbVPoles <= 2 after removing, a Bezier surface must have at least two columns of poles. Raised if Vindex < 1 or VIndex > NbVPoles

◆ RemovePoleRow()

void Geom_BezierSurface::RemovePoleRow ( const Standard_Integer  UIndex)

Removes a row of poles. If the surface was rational it can become non-rational.

Raised if NbUPoles <= 2 after removing, a Bezier surface must have at least two rows of poles. Raised if Uindex < 1 or UIndex > NbUPoles

◆ Resolution()

void Geom_BezierSurface::Resolution ( const Standard_Real  Tolerance3D,
Standard_Real UTolerance,
Standard_Real VTolerance 
)

Computes two tolerance values for this Bezier surface, based on the given tolerance in 3D space Tolerance3D. The tolerances computed are:

  • UTolerance in the u parametric direction, and
  • VTolerance in the v parametric direction. If f(u,v) is the equation of this Bezier surface, UTolerance and VTolerance guarantee that: | u1 - u0 | < UTolerance and | v1 - v0 | < VTolerance ====> |f (u1,v1) - f (u0,v0)| < Tolerance3D

◆ Segment()

void Geom_BezierSurface::Segment ( const Standard_Real  U1,
const Standard_Real  U2,
const Standard_Real  V1,
const Standard_Real  V2 
)

Modifies this Bezier surface by segmenting it between U1 and U2 in the u parametric direction, and between V1 and V2 in the v parametric direction. U1, U2, V1, and V2 can be outside the bounds of this surface.

  • U1 and U2 isoparametric Bezier curves, segmented between V1 and V2, become the two bounds of the surface in the v parametric direction (0. and 1. u isoparametric curves).
  • V1 and V2 isoparametric Bezier curves, segmented between U1 and U2, become the two bounds of the surface in the u parametric direction (0. and 1. v isoparametric curves). The poles and weights tables are modified, but the degree of this surface in the u and v parametric directions does not change. U1 can be greater than U2, and V1 can be greater than V2. In these cases, the corresponding parametric direction is inverted. The orientation of the surface is inverted if one (and only one) parametric direction is inverted.

◆ SetPole() [1/2]

void Geom_BezierSurface::SetPole ( const Standard_Integer  UIndex,
const Standard_Integer  VIndex,
const gp_Pnt P 
)

Modifies a pole value. If the surface is rational the weight of range (UIndex, VIndex) is not modified.

Raised if UIndex < 1 or UIndex > NbUPoles or VIndex < 1 or VIndex > NbVPoles.

◆ SetPole() [2/2]

void Geom_BezierSurface::SetPole ( const Standard_Integer  UIndex,
const Standard_Integer  VIndex,
const gp_Pnt P,
const Standard_Real  Weight 
)

Substitutes the pole and the weight of range UIndex, VIndex. If the surface <me> is not rational it can become rational. if the surface was rational it can become non-rational.

raises if UIndex < 1 or UIndex > NbUPoles or VIndex < 1 or VIndex > NbVPoles. Raised if Weight <= Resolution from package gp.

◆ SetPoleCol() [1/2]

void Geom_BezierSurface::SetPoleCol ( const Standard_Integer  VIndex,
const TColgp_Array1OfPnt CPoles 
)

Modifies a column of poles. The length of CPoles can be lower but not greater than NbUPoles so you can modify just a part of the column. Raised if VIndex < 1 or VIndex > NbVPoles.

Raised if CPoles.Lower() < 1 or CPoles.Upper() > NbUPoles

◆ SetPoleCol() [2/2]

void Geom_BezierSurface::SetPoleCol ( const Standard_Integer  VIndex,
const TColgp_Array1OfPnt CPoles,
const TColStd_Array1OfReal CPoleWeights 
)

Modifies a column of poles. If the surface was rational it can become non-rational If the surface was non-rational it can become rational. The length of CPoles can be lower but not greater than NbUPoles so you can modify just a part of the column. Raised if VIndex < 1 or VIndex > NbVPoles.

Raised if CPoles.Lower() < 1 or CPoles.Upper() > NbUPoles Raised if CPoleWeights and CPoles have not the same bounds. Raised if one of the weight value CPoleWeights (i) is lower or equal to Resolution from package gp.

◆ SetPoleRow() [1/2]

void Geom_BezierSurface::SetPoleRow ( const Standard_Integer  UIndex,
const TColgp_Array1OfPnt CPoles 
)

Modifies a row of poles. The length of CPoles can be lower but not greater than NbVPoles so you can modify just a part of the row. Raised if UIndex < 1 or UIndex > NbUPoles.

Raised if CPoles.Lower() < 1 or CPoles.Upper() > NbVPoles

◆ SetPoleRow() [2/2]

void Geom_BezierSurface::SetPoleRow ( const Standard_Integer  UIndex,
const TColgp_Array1OfPnt CPoles,
const TColStd_Array1OfReal CPoleWeights 
)

Modifies a row of poles and weights. If the surface was rational it can become non-rational. If the surface was non-rational it can become rational. The length of CPoles can be lower but not greater than NbVPoles so you can modify just a part of the row. Raised if UIndex < 1 or UIndex > NbUPoles.

Raised if CPoles.Lower() < 1 or CPoles.Upper() > NbVPoles Raised if CPoleWeights and CPoles have not the same bounds. Raised if one of the weight value CPoleWeights (i) is lower or equal to Resolution from gp.

◆ SetWeight()

void Geom_BezierSurface::SetWeight ( const Standard_Integer  UIndex,
const Standard_Integer  VIndex,
const Standard_Real  Weight 
)

Modifies the weight of the pole of range UIndex, VIndex. If the surface was non-rational it can become rational. If the surface was rational it can become non-rational.

Raised if UIndex < 1 or UIndex > NbUPoles or VIndex < 1 or VIndex > NbVPoles. Raised if Weight <= Resolution from package gp.

◆ SetWeightCol()

void Geom_BezierSurface::SetWeightCol ( const Standard_Integer  VIndex,
const TColStd_Array1OfReal CPoleWeights 
)

Modifies a column of weights. If the surface was rational it can become non-rational. If the surface was non-rational it can become rational. The length of CPoleWeights can be lower but not greater than NbUPoles. Raised if VIndex < 1 or VIndex > NbVPoles.

Raised if CPoleWeights.Lower() < 1 or CPoleWeights.Upper() > NbUPoles Raised if one of the weight value CPoleWeights (i) is lower or equal to Resolution from package gp.

◆ SetWeightRow()

void Geom_BezierSurface::SetWeightRow ( const Standard_Integer  UIndex,
const TColStd_Array1OfReal CPoleWeights 
)

Modifies a row of weights. If the surface was rational it can become non-rational. If the surface was non-rational it can become rational. The length of CPoleWeights can be lower but not greater than NbVPoles. Raised if UIndex < 1 or UIndex > NbUPoles.

Raised if CPoleWeights.Lower() < 1 or CPoleWeights.Upper() > NbVPoles Raised if one of the weight value CPoleWeights (i) is lower or equal to Resolution from package gp.

◆ Transform()

void Geom_BezierSurface::Transform ( const gp_Trsf T)
overridevirtual

Applies the transformation T to this Bezier surface.

Implements Geom_Geometry.

◆ UDegree()

Standard_Integer Geom_BezierSurface::UDegree ( ) const

Returns the degree of the surface in the U direction it is NbUPoles - 1.

◆ UIso()

Handle< Geom_Curve > Geom_BezierSurface::UIso ( const Standard_Real  U) const
overridevirtual

Computes the U isoparametric curve. For a Bezier surface the UIso curve is a Bezier curve.

Implements Geom_Surface.

◆ UReverse()

void Geom_BezierSurface::UReverse ( )
overridevirtual

Changes the orientation of this Bezier surface in the u parametric direction. The bounds of the surface are not changed, but the given parametric direction is reversed. Hence, the orientation of the surface is reversed.

Implements Geom_Surface.

◆ UReversedParameter()

Standard_Real Geom_BezierSurface::UReversedParameter ( const Standard_Real  U) const
overridevirtual

Computes the u (or v) parameter on the modified surface, produced by reversing its u (or v) parametric direction, for any point of u parameter U (or of v parameter V) on this Bezier surface. In the case of a Bezier surface, these functions return respectively:

  • 1.-U, or 1.-V.

Implements Geom_Surface.

◆ VDegree()

Standard_Integer Geom_BezierSurface::VDegree ( ) const

Returns the degree of the surface in the V direction it is NbVPoles - 1.

◆ VIso()

Handle< Geom_Curve > Geom_BezierSurface::VIso ( const Standard_Real  V) const
overridevirtual

Computes the V isoparametric curve. For a Bezier surface the VIso curve is a Bezier curve.

Implements Geom_Surface.

◆ VReverse()

void Geom_BezierSurface::VReverse ( )
overridevirtual

Changes the orientation of this Bezier surface in the v parametric direction. The bounds of the surface are not changed, but the given parametric direction is reversed. Hence, the orientation of the surface is reversed.

Implements Geom_Surface.

◆ VReversedParameter()

Standard_Real Geom_BezierSurface::VReversedParameter ( const Standard_Real  V) const
overridevirtual

Computes the u (or v) parameter on the modified surface, produced by reversing its u (or v) parametric direction, for any point of u parameter U (or of v parameter V) on this Bezier surface. In the case of a Bezier surface, these functions return respectively:

  • 1.-U, or 1.-V.

Implements Geom_Surface.

◆ Weight()

Standard_Real Geom_BezierSurface::Weight ( const Standard_Integer  UIndex,
const Standard_Integer  VIndex 
) const

Returns the weight of range UIndex, VIndex.

Raised if UIndex < 1 or UIndex > NbUPoles, or VIndex < 1 or VIndex > NbVPoles.

◆ Weights() [1/2]

void Geom_BezierSurface::Weights ( TColStd_Array2OfReal W) const

Returns the weights of the Bezier surface.

Raised if the length of W in the U an V direction is not equal to NbUPoles and NbVPoles.

◆ Weights() [2/2]

const TColStd_Array2OfReal* Geom_BezierSurface::Weights ( ) const
inline

Returns the weights of the Bezier surface.


The documentation for this class was generated from the following file: