The abstract class BoundedCurve describes the common behavior of bounded curves in 3D space. A bounded curve is limited by two finite values of the parameter, termed respectively "first parameter" and "last parameter". The "first parameter" gives the "start point" of the bounded curve, and the "last parameter" gives the "end point" of the bounded curve. The length of a bounded curve is finite. The Geom package provides three concrete classes of bounded curves: More...
#include <Geom_BoundedCurve.hxx>
Inheritance diagram for Geom_BoundedCurve:
Public Member Functions | |
| virtual gp_Pnt | EndPoint () const =0 |
| Returns the end point of the curve. More... | |
| virtual gp_Pnt | StartPoint () const =0 |
| Returns the start point of the curve. More... | |
| virtual void | DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const override |
| Dumps the content of me into the stream. More... | |
 Public Member Functions inherited from Geom_Curve | |
| virtual void | Reverse ()=0 |
| Changes the direction of parametrization of <me>. The "FirstParameter" and the "LastParameter" are not changed but the orientation of the curve is modified. If the curve is bounded the StartPoint of the initial curve becomes the EndPoint of the reversed curve and the EndPoint of the initial curve becomes the StartPoint of the reversed curve. More... | |
| virtual Standard_Real | ReversedParameter (const Standard_Real U) const =0 |
| Returns the parameter on the reversed curve for the point of parameter U on <me>. More... | |
| virtual Standard_Real | TransformedParameter (const Standard_Real U, const gp_Trsf &T) const |
| Returns the parameter on the transformed curve for the transform of the point of parameter U on <me>. More... | |
| virtual Standard_Real | ParametricTransformation (const gp_Trsf &T) const |
| Returns a coefficient to compute the parameter on the transformed curve for the transform of the point on <me>. More... | |
| Handle< Geom_Curve > | Reversed () const |
| Returns a copy of <me> reversed. More... | |
| virtual Standard_Real | FirstParameter () const =0 |
| Returns the value of the first parameter. Warnings : It can be RealFirst from package Standard if the curve is infinite. More... | |
| virtual Standard_Real | LastParameter () const =0 |
| Returns the value of the last parameter. Warnings : It can be RealLast from package Standard if the curve is infinite. More... | |
| virtual Standard_Boolean | IsClosed () const =0 |
| Returns true if the curve is closed. Some curves such as circle are always closed, others such as line are never closed (by definition). Some Curves such as OffsetCurve can be closed or not. These curves are considered as closed if the distance between the first point and the last point of the curve is lower or equal to the Resolution from package gp which is a fixed criterion independent of the application. More... | |
| virtual Standard_Boolean | IsPeriodic () const =0 |
| Is the parametrization of the curve periodic ? It is possible only if the curve is closed and if the following relation is satisfied : for each parametric value U the distance between the point P(u) and the point P (u + T) is lower or equal to Resolution from package gp, T is the period and must be a constant. There are three possibilities : . the curve is never periodic by definition (SegmentLine) . the curve is always periodic by definition (Circle) . the curve can be defined as periodic (BSpline). In this case a function SetPeriodic allows you to give the shape of the curve. The general rule for this case is : if a curve can be periodic or not the default periodicity set is non periodic and you have to turn (explicitly) the curve into a periodic curve if you want the curve to be periodic. More... | |
| virtual Standard_Real | Period () const |
| Returns the period of this curve. Exceptions Standard_NoSuchObject if this curve is not periodic. More... | |
| virtual GeomAbs_Shape | Continuity () const =0 |
| It is the global continuity of the curve C0 : only geometric continuity, C1 : continuity of the first derivative all along the Curve, C2 : continuity of the second derivative all along the Curve, C3 : continuity of the third derivative all along the Curve, G1 : tangency continuity all along the Curve, G2 : curvature continuity all along the Curve, CN : the order of continuity is infinite. More... | |
| virtual Standard_Boolean | IsCN (const Standard_Integer N) const =0 |
| Returns true if the degree of continuity of this curve is at least N. Exceptions - Standard_RangeError if N is less than 0. More... | |
| virtual void | D0 (const Standard_Real U, gp_Pnt &P) const =0 |
| Returns in P the point of parameter U. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. More... | |
| virtual void | D1 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1) const =0 |
| Returns the point P of parameter U and the first derivative V1. Raised if the continuity of the curve is not C1. More... | |
| virtual void | D2 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2) const =0 |
| Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the curve is not C2. More... | |
| virtual void | D3 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2, gp_Vec &V3) const =0 |
| Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the curve is not C3. More... | |
| virtual gp_Vec | DN (const Standard_Real U, const Standard_Integer N) const =0 |
| The returned vector gives the value of the derivative for the order of derivation N. Raised if the continuity of the curve is not CN. More... | |
| gp_Pnt | Value (const Standard_Real U) const |
| Computes the point of parameter U on <me>. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. it is implemented with D0. More... | |
| Public Member Functions inherited from Geom_Geometry | |
| void | Mirror (const gp_Pnt &P) |
| Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More... | |
| void | Mirror (const gp_Ax1 &A1) |
| Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More... | |
| void | Mirror (const gp_Ax2 &A2) |
| Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More... | |
| void | Rotate (const gp_Ax1 &A1, const Standard_Real Ang) |
| Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More... | |
| void | Scale (const gp_Pnt &P, const Standard_Real S) |
| Scales a Geometry. S is the scaling value. More... | |
| void | Translate (const gp_Vec &V) |
| Translates a Geometry. V is the vector of the translation. More... | |
| void | Translate (const gp_Pnt &P1, const gp_Pnt &P2) |
| Translates a Geometry from the point P1 to the point P2. More... | |
| virtual void | Transform (const gp_Trsf &T)=0 |
| Transformation of a geometric object. This tansformation can be a translation, a rotation, a symmetry, a scaling or a complex transformation obtained by combination of the previous elementaries transformations. (see class Transformation of the package Geom). More... | |
| Handle< Geom_Geometry > | Mirrored (const gp_Pnt &P) const |
| Handle< Geom_Geometry > | Mirrored (const gp_Ax1 &A1) const |
| Handle< Geom_Geometry > | Mirrored (const gp_Ax2 &A2) const |
| Handle< Geom_Geometry > | Rotated (const gp_Ax1 &A1, const Standard_Real Ang) const |
| Handle< Geom_Geometry > | Scaled (const gp_Pnt &P, const Standard_Real S) const |
| Handle< Geom_Geometry > | Transformed (const gp_Trsf &T) const |
| Handle< Geom_Geometry > | Translated (const gp_Vec &V) const |
| Handle< Geom_Geometry > | Translated (const gp_Pnt &P1, const gp_Pnt &P2) const |
| virtual Handle< Geom_Geometry > | Copy () const =0 |
| Creates a new object which is a copy of this geometric object. More... | |
| Public Member Functions inherited from Standard_Transient | |
| Standard_Transient () | |
| Empty constructor. More... | |
| Standard_Transient (const Standard_Transient &) | |
| Copy constructor – does nothing. More... | |
| Standard_Transient & | operator= (const Standard_Transient &) |
| Assignment operator, needed to avoid copying reference counter. More... | |
| virtual | ~Standard_Transient () |
| Destructor must be virtual. More... | |
| virtual void | Delete () const |
| Memory deallocator for transient classes. More... | |
| virtual const opencascade::handle< Standard_Type > & | DynamicType () const |
| Returns a type descriptor about this object. More... | |
| Standard_Boolean | IsInstance (const opencascade::handle< Standard_Type > &theType) const |
| Returns a true value if this is an instance of Type. More... | |
| Standard_Boolean | IsInstance (const Standard_CString theTypeName) const |
| Returns a true value if this is an instance of TypeName. More... | |
| Standard_Boolean | IsKind (const opencascade::handle< Standard_Type > &theType) const |
| Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Boolean | IsKind (const Standard_CString theTypeName) const |
| Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Transient * | This () const |
| Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More... | |
| Standard_Integer | GetRefCount () const |
| Get the reference counter of this object. More... | |
| void | IncrementRefCounter () const |
| Increments the reference counter of this object. More... | |
| Standard_Integer | DecrementRefCounter () const |
| Decrements the reference counter of this object; returns the decremented value. More... | |
Additional Inherited Members | |
| Public Types inherited from Standard_Transient | |
| typedef void | base_type |
| Returns a type descriptor about this object. More... | |
| Static Public Member Functions inherited from Standard_Transient | |
| static const char * | get_type_name () |
| Returns a type descriptor about this object. More... | |
| static const opencascade::handle< Standard_Type > & | get_type_descriptor () |
| Returns type descriptor of Standard_Transient class. More... | |
Detailed Description
The abstract class BoundedCurve describes the common behavior of bounded curves in 3D space. A bounded curve is limited by two finite values of the parameter, termed respectively "first parameter" and "last parameter". The "first parameter" gives the "start point" of the bounded curve, and the "last parameter" gives the "end point" of the bounded curve. The length of a bounded curve is finite. The Geom package provides three concrete classes of bounded curves:
- two frequently used mathematical formulations of complex curves:
- Geom_BezierCurve,
- Geom_BSplineCurve, and
- Geom_TrimmedCurve to trim a curve, i.e. to only take part of the curve limited by two values of the parameter of the basis curve.
Member Function Documentation
◆ DumpJson()
|
overridevirtual |
Dumps the content of me into the stream.
Reimplemented from Geom_Curve.
Reimplemented in Geom_BSplineCurve, Geom_BezierCurve, and Geom_TrimmedCurve.
◆ EndPoint()
|
pure virtual |
Returns the end point of the curve.
Implemented in Geom_BSplineCurve, Geom_BezierCurve, and Geom_TrimmedCurve.
◆ StartPoint()
|
pure virtual |
Returns the start point of the curve.
Implemented in Geom_BSplineCurve, Geom_BezierCurve, and Geom_TrimmedCurve.
The documentation for this class was generated from the following file:
