Open CASCADE Technology  7.7.0
Public Member Functions | Protected Attributes
Geom_SweptSurface Class Reference

Describes the common behavior for surfaces constructed by sweeping a curve with another curve. The Geom package provides two concrete derived surfaces: surface of revolution (a revolved surface), and surface of linear extrusion (an extruded surface). More...

#include <Geom_SweptSurface.hxx>

Inheritance diagram for Geom_SweptSurface:
Inheritance graph
[legend]

Public Member Functions

GeomAbs_Shape Continuity () const override
 returns the continuity of the surface : C0 : only geometric continuity, C1 : continuity of the first derivative all along the surface, C2 : continuity of the second derivative all along the surface, C3 : continuity of the third derivative all along the surface, G1 : tangency continuity all along the surface, G2 : curvature continuity all along the surface, CN : the order of continuity is infinite. More...
 
const gp_DirDirection () const
 Returns the reference direction of the swept surface. For a surface of revolution it is the direction of the revolution axis, for a surface of linear extrusion it is the direction of extrusion. More...
 
Handle< Geom_CurveBasisCurve () const
 Returns the referenced curve of the surface. For a surface of revolution it is the revolution curve, for a surface of linear extrusion it is the extruded curve. More...
 
virtual void DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const override
 Dumps the content of me into the stream. More...
 
- Public Member Functions inherited from Geom_Surface
virtual void UReverse ()=0
 Reverses the U direction of parametrization of <me>. The bounds of the surface are not modified. More...
 
Handle< Geom_SurfaceUReversed () const
 Reverses the U direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
 
virtual Standard_Real UReversedParameter (const Standard_Real U) const =0
 Returns the parameter on the Ureversed surface for the point of parameter U on <me>. More...
 
virtual void VReverse ()=0
 Reverses the V direction of parametrization of <me>. The bounds of the surface are not modified. More...
 
Handle< Geom_SurfaceVReversed () const
 Reverses the V direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
 
virtual Standard_Real VReversedParameter (const Standard_Real V) const =0
 Returns the parameter on the Vreversed surface for the point of parameter V on <me>. More...
 
virtual void TransformParameters (Standard_Real &U, Standard_Real &V, const gp_Trsf &T) const
 Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>. More...
 
virtual gp_GTrsf2d ParametricTransformation (const gp_Trsf &T) const
 Returns a 2d transformation used to find the new parameters of a point on the transformed surface. More...
 
virtual void Bounds (Standard_Real &U1, Standard_Real &U2, Standard_Real &V1, Standard_Real &V2) const =0
 Returns the parametric bounds U1, U2, V1 and V2 of this surface. If the surface is infinite, this function can return a value equal to Precision::Infinite: instead of Standard_Real::LastReal. More...
 
virtual Standard_Boolean IsUClosed () const =0
 Checks whether this surface is closed in the u parametric direction. Returns true if, in the u parametric direction: taking uFirst and uLast as the parametric bounds in the u parametric direction, for each parameter v, the distance between the points P(uFirst, v) and P(uLast, v) is less than or equal to gp::Resolution(). More...
 
virtual Standard_Boolean IsVClosed () const =0
 Checks whether this surface is closed in the u parametric direction. Returns true if, in the v parametric direction: taking vFirst and vLast as the parametric bounds in the v parametric direction, for each parameter u, the distance between the points P(u, vFirst) and P(u, vLast) is less than or equal to gp::Resolution(). More...
 
virtual Standard_Boolean IsUPeriodic () const =0
 Checks if this surface is periodic in the u parametric direction. Returns true if: More...
 
virtual Standard_Real UPeriod () const
 Returns the period of this surface in the u parametric direction. Raises if the surface is not uperiodic. More...
 
virtual Standard_Boolean IsVPeriodic () const =0
 Checks if this surface is periodic in the v parametric direction. Returns true if: More...
 
virtual Standard_Real VPeriod () const
 Returns the period of this surface in the v parametric direction. raises if the surface is not vperiodic. More...
 
virtual Handle< Geom_CurveUIso (const Standard_Real U) const =0
 Computes the U isoparametric curve. More...
 
virtual Handle< Geom_CurveVIso (const Standard_Real V) const =0
 Computes the V isoparametric curve. More...
 
virtual Standard_Boolean IsCNu (const Standard_Integer N) const =0
 Returns the order of continuity of the surface in the U parametric direction. Raised if N < 0. More...
 
virtual Standard_Boolean IsCNv (const Standard_Integer N) const =0
 Returns the order of continuity of the surface in the V parametric direction. Raised if N < 0. More...
 
virtual void D0 (const Standard_Real U, const Standard_Real V, gp_Pnt &P) const =0
 Computes the point of parameter U,V on the surface. More...
 
virtual void D1 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V) const =0
 Computes the point P and the first derivatives in the directions U and V at this point. Raised if the continuity of the surface is not C1. More...
 
virtual void D2 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV) const =0
 Computes the point P, the first and the second derivatives in the directions U and V at this point. Raised if the continuity of the surface is not C2. More...
 
virtual void D3 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV, gp_Vec &D3U, gp_Vec &D3V, gp_Vec &D3UUV, gp_Vec &D3UVV) const =0
 Computes the point P, the first,the second and the third derivatives in the directions U and V at this point. Raised if the continuity of the surface is not C2. More...
 
virtual gp_Vec DN (const Standard_Real U, const Standard_Real V, const Standard_Integer Nu, const Standard_Integer Nv) const =0
 Computes the derivative of order Nu in the direction U and Nv in the direction V at the point P(U, V). More...
 
gp_Pnt Value (const Standard_Real U, const Standard_Real V) const
 Computes the point of parameter (U, V) on the surface. More...
 
- Public Member Functions inherited from Geom_Geometry
void Mirror (const gp_Pnt &P)
 Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More...
 
void Mirror (const gp_Ax1 &A1)
 Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...
 
void Mirror (const gp_Ax2 &A2)
 Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More...
 
void Rotate (const gp_Ax1 &A1, const Standard_Real Ang)
 Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More...
 
void Scale (const gp_Pnt &P, const Standard_Real S)
 Scales a Geometry. S is the scaling value. More...
 
void Translate (const gp_Vec &V)
 Translates a Geometry. V is the vector of the translation. More...
 
void Translate (const gp_Pnt &P1, const gp_Pnt &P2)
 Translates a Geometry from the point P1 to the point P2. More...
 
virtual void Transform (const gp_Trsf &T)=0
 Transformation of a geometric object. This tansformation can be a translation, a rotation, a symmetry, a scaling or a complex transformation obtained by combination of the previous elementaries transformations. (see class Transformation of the package Geom). More...
 
Handle< Geom_GeometryMirrored (const gp_Pnt &P) const
 
Handle< Geom_GeometryMirrored (const gp_Ax1 &A1) const
 
Handle< Geom_GeometryMirrored (const gp_Ax2 &A2) const
 
Handle< Geom_GeometryRotated (const gp_Ax1 &A1, const Standard_Real Ang) const
 
Handle< Geom_GeometryScaled (const gp_Pnt &P, const Standard_Real S) const
 
Handle< Geom_GeometryTransformed (const gp_Trsf &T) const
 
Handle< Geom_GeometryTranslated (const gp_Vec &V) const
 
Handle< Geom_GeometryTranslated (const gp_Pnt &P1, const gp_Pnt &P2) const
 
virtual Handle< Geom_GeometryCopy () const =0
 Creates a new object which is a copy of this geometric object. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Protected Attributes

Handle< Geom_CurvebasisCurve
 
gp_Dir direction
 
GeomAbs_Shape smooth
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 

Detailed Description

Describes the common behavior for surfaces constructed by sweeping a curve with another curve. The Geom package provides two concrete derived surfaces: surface of revolution (a revolved surface), and surface of linear extrusion (an extruded surface).

Member Function Documentation

◆ BasisCurve()

Handle< Geom_Curve > Geom_SweptSurface::BasisCurve ( ) const

Returns the referenced curve of the surface. For a surface of revolution it is the revolution curve, for a surface of linear extrusion it is the extruded curve.

◆ Continuity()

GeomAbs_Shape Geom_SweptSurface::Continuity ( ) const
overridevirtual

returns the continuity of the surface : C0 : only geometric continuity, C1 : continuity of the first derivative all along the surface, C2 : continuity of the second derivative all along the surface, C3 : continuity of the third derivative all along the surface, G1 : tangency continuity all along the surface, G2 : curvature continuity all along the surface, CN : the order of continuity is infinite.

Implements Geom_Surface.

◆ Direction()

const gp_Dir& Geom_SweptSurface::Direction ( ) const

Returns the reference direction of the swept surface. For a surface of revolution it is the direction of the revolution axis, for a surface of linear extrusion it is the direction of extrusion.

◆ DumpJson()

virtual void Geom_SweptSurface::DumpJson ( Standard_OStream theOStream,
Standard_Integer  theDepth = -1 
) const
overridevirtual

Dumps the content of me into the stream.

Reimplemented from Geom_Surface.

Reimplemented in Geom_SurfaceOfRevolution, and Geom_SurfaceOfLinearExtrusion.

Field Documentation

◆ basisCurve

Handle< Geom_Curve > Geom_SweptSurface::basisCurve
protected

◆ direction

gp_Dir Geom_SweptSurface::direction
protected

◆ smooth

GeomAbs_Shape Geom_SweptSurface::smooth
protected

The documentation for this class was generated from the following file: