GeomFill_SectionGenerator Class Reference

gives the functions needed for instantiation from AppSurf in AppBlend. Allow to evaluate a surface passing by all the curves if the Profiler. More...

#include <GeomFill_SectionGenerator.hxx>

Inheritance diagram for GeomFill_SectionGenerator:

Public Member Functions
	GeomFill_SectionGenerator ()
void	SetParam (const Handle< TColStd_HArray1OfReal > &Params)
void	GetShape (Standard_Integer &NbPoles, Standard_Integer &NbKnots, Standard_Integer &Degree, Standard_Integer &NbPoles2d) const
void	Knots (TColStd_Array1OfReal &TKnots) const
void	Mults (TColStd_Array1OfInteger &TMults) const
Standard_Boolean	Section (const Standard_Integer P, TColgp_Array1OfPnt &Poles, TColgp_Array1OfVec &DPoles, TColgp_Array1OfPnt2d &Poles2d, TColgp_Array1OfVec2d &DPoles2d, TColStd_Array1OfReal &Weigths, TColStd_Array1OfReal &DWeigths) const
	Used for the first and last section The method returns Standard_True if the derivatives are computed, otherwise it returns Standard_False. More...
void	Section (const Standard_Integer P, TColgp_Array1OfPnt &Poles, TColgp_Array1OfPnt2d &Poles2d, TColStd_Array1OfReal &Weigths) const
Standard_Real	Parameter (const Standard_Integer P) const
	Returns the parameter of Section. More...
Public Member Functions inherited from GeomFill_Profiler
	GeomFill_Profiler ()
virtual	~GeomFill_Profiler ()
void	AddCurve (const Handle< Geom_Curve > &Curve)
virtual void	Perform (const Standard_Real PTol)
	Converts all curves to BSplineCurves. Set them to the common profile. <PTol> is used to compare 2 knots. More...
Standard_Integer	Degree () const
	Raises if not yet perform. More...
Standard_Boolean	IsPeriodic () const
Standard_Integer	NbPoles () const
	Raises if not yet perform. More...
void	Poles (const Standard_Integer Index, TColgp_Array1OfPnt &Poles) const
	returns in <Poles> the poles of the BSplineCurve from index <Index> adjusting to the current profile. Raises if not yet perform Raises if <Index> not in the range [1,NbCurves] if the length of <Poles> is not equal to NbPoles(). More...
void	Weights (const Standard_Integer Index, TColStd_Array1OfReal &Weights) const
	returns in <Weights> the weights of the BSplineCurve from index <Index> adjusting to the current profile. Raises if not yet perform Raises if <Index> not in the range [1,NbCurves] or if the length of <Weights> is not equal to NbPoles(). More...
Standard_Integer	NbKnots () const
	Raises if not yet perform. More...
void	KnotsAndMults (TColStd_Array1OfReal &Knots, TColStd_Array1OfInteger &Mults) const
	Raises if not yet perform Raises if the lengths of <Knots> and <Mults> are not equal to NbKnots(). More...
const Handle< Geom_Curve > &	Curve (const Standard_Integer Index) const

Protected Attributes
Handle< TColStd_HArray1OfReal >	myParams
Protected Attributes inherited from GeomFill_Profiler
TColGeom_SequenceOfCurve	mySequence
Standard_Boolean	myIsDone
Standard_Boolean	myIsPeriodic

Detailed Description

gives the functions needed for instantiation from AppSurf in AppBlend. Allow to evaluate a surface passing by all the curves if the Profiler.

Constructor & Destructor Documentation

GeomFill_SectionGenerator()

GeomFill_SectionGenerator::GeomFill_SectionGenerator

(

)

Member Function Documentation

GetShape()

void GeomFill_SectionGenerator::GetShape	(	Standard_Integer &	NbPoles,
		Standard_Integer &	NbKnots,
		Standard_Integer &	Degree,
		Standard_Integer &	NbPoles2d
	)		const

Knots()

void GeomFill_SectionGenerator::Knots

(

TColStd_Array1OfReal &

TKnots

)

const

Mults()

void GeomFill_SectionGenerator::Mults

(

TColStd_Array1OfInteger &

TMults

)

const

Parameter()

Standard_Real GeomFill_SectionGenerator::Parameter

(

const Standard_Integer

P

)

const

Returns the parameter of Section.

, to impose it for the approximation.

Section() [1/2]

Standard_Boolean GeomFill_SectionGenerator::Section	(	const Standard_Integer	P,
		TColgp_Array1OfPnt &	Poles,
		TColgp_Array1OfVec &	DPoles,
		TColgp_Array1OfPnt2d &	Poles2d,
		TColgp_Array1OfVec2d &	DPoles2d,
		TColStd_Array1OfReal &	Weigths,
		TColStd_Array1OfReal &	DWeigths
	)		const

Used for the first and last section The method returns Standard_True if the derivatives are computed, otherwise it returns Standard_False.

Section() [2/2]

void GeomFill_SectionGenerator::Section	(	const Standard_Integer	P,
		TColgp_Array1OfPnt &	Poles,
		TColgp_Array1OfPnt2d &	Poles2d,
		TColStd_Array1OfReal &	Weigths
	)		const

SetParam()

void GeomFill_SectionGenerator::SetParam

(

const Handle< TColStd_HArray1OfReal > &

Params

)

Field Documentation

myParams

Handle< TColStd_HArray1OfReal > GeomFill_SectionGenerator::myParams

protected

---

The documentation for this class was generated from the following file:

• GeomFill_SectionGenerator.hxx