Generic light source definition. This class defines arbitrary light source - see Graphic3d_TypeOfLightSource enumeration. Some parameters are applicable only to particular light type; calling methods unrelated to current type will throw an exception. More...

#include <Graphic3d_CLight.hxx>

Inheritance diagram for Graphic3d_CLight:

[legend]

Public Member Functions
	Graphic3d_CLight (Graphic3d_TypeOfLightSource theType)
	Empty constructor, which should be followed by light source properties configuration. More...

void	CopyFrom (const Handle< Graphic3d_CLight > &theLight)
	Copy parameters from another light source excluding source type. More...

Graphic3d_TypeOfLightSource	Type () const
	Returns the Type of the Light, cannot be changed after object construction. More...

const TCollection_AsciiString &	Name () const
	Returns light source name; empty string by default. More...

void	SetName (const TCollection_AsciiString &theName)
	Sets light source name. More...

const Quantity_Color &	Color () const
	Returns the color of the light source; WHITE by default. More...

void	SetColor (const Quantity_Color &theColor)
	Defines the color of a light source by giving the basic color. More...

Standard_Boolean	IsEnabled () const
	Check that the light source is turned on; TRUE by default. This flag affects all occurrences of light sources, where it was registered and activated; so that it is possible defining an active light in View which is actually in disabled state. More...

void	SetEnabled (Standard_Boolean theIsOn)
	Change enabled state of the light state. This call does not remove or deactivate light source in Views/Viewers; instead it turns it OFF so that it just have no effect. More...

Standard_Boolean	ToCastShadows () const
	Return TRUE if shadow casting is enabled; FALSE by default. Has no effect in Ray-Tracing rendering mode. More...

void	SetCastShadows (Standard_Boolean theToCast)
	Enable/disable shadow casting. More...

Standard_Boolean	IsHeadlight () const
	Returns true if the light is a headlight; FALSE by default. Headlight flag means that light position/direction are defined not in a World coordinate system, but relative to the camera orientation. More...

Standard_Boolean	Headlight () const
	Alias for IsHeadlight(). More...

void	SetHeadlight (Standard_Boolean theValue)
	Setup headlight flag. More...

positional/spot light properties
const gp_Pnt &	Position () const
	Returns location of positional/spot light; (0, 0, 0) by default. More...

void	SetPosition (const gp_Pnt &thePosition)
	Setup location of positional/spot light. More...

void	Position (Standard_Real &theX, Standard_Real &theY, Standard_Real &theZ) const
	Returns location of positional/spot light. More...

void	SetPosition (Standard_Real theX, Standard_Real theY, Standard_Real theZ)
	Setup location of positional/spot light. More...

Standard_ShortReal	ConstAttenuation () const
	Returns constant attenuation factor of positional/spot light source; 1.0f by default. Distance attenuation factors of reducing positional/spot light intensity depending on the distance from its position: More...

Standard_ShortReal	LinearAttenuation () const
	Returns linear attenuation factor of positional/spot light source; 0.0 by default. Distance attenuation factors of reducing positional/spot light intensity depending on the distance from its position: More...

void	Attenuation (Standard_Real &theConstAttenuation, Standard_Real &theLinearAttenuation) const
	Returns the attenuation factors. More...

void	SetAttenuation (Standard_ShortReal theConstAttenuation, Standard_ShortReal theLinearAttenuation)
	Defines the coefficients of attenuation; values should be >= 0.0 and their summ should not be equal to 0. More...

directional/spot light additional properties
gp_Dir	Direction () const
	Returns direction of directional/spot light. More...

void	SetDirection (const gp_Dir &theDir)
	Sets direction of directional/spot light. More...

void	Direction (Standard_Real &theVx, Standard_Real &theVy, Standard_Real &theVz) const
	Returns the theVx, theVy, theVz direction of the light source. More...

void	SetDirection (Standard_Real theVx, Standard_Real theVy, Standard_Real theVz)
	Sets direction of directional/spot light. More...

const gp_Pnt &	DisplayPosition () const
	Returns location of positional/spot/directional light, which is the same as returned by Position(). More...

void	SetDisplayPosition (const gp_Pnt &thePosition)
	Setup location of positional/spot/directional light, which is the same as SetPosition() but allows directional light source (technically having no position, but this point can be used for displaying light source presentation). More...

spotlight additional definition parameters
Standard_ShortReal	Angle () const
	Returns an angle in radians of the cone created by the spot; 30 degrees by default. More...

void	SetAngle (Standard_ShortReal theAngle)
	Angle in radians of the cone created by the spot, should be within range (0.0, M_PI). More...

Standard_ShortReal	Concentration () const
	Returns intensity distribution of the spot light, within [0.0, 1.0] range; 1.0 by default. This coefficient should be converted into spotlight exponent within [0.0, 128.0] range: More...

void	SetConcentration (Standard_ShortReal theConcentration)
	Defines the coefficient of concentration; value should be within range [0.0, 1.0]. More...

Ray-Tracing / Path-Tracing light properties
Standard_ShortReal	Intensity () const
	Returns the intensity of light source; 1.0 by default. More...

void	SetIntensity (Standard_ShortReal theValue)
	Modifies the intensity of light source, which should be > 0.0. More...

Standard_ShortReal	Smoothness () const
	Returns the smoothness of light source (either smoothing angle for directional light or smoothing radius in case of positional light); 0.0 by default. More...

void	SetSmoothRadius (Standard_ShortReal theValue)
	Modifies the smoothing radius of positional/spot light; should be >= 0.0. More...

void	SetSmoothAngle (Standard_ShortReal theValue)
	Modifies the smoothing angle (in radians) of directional light source; should be within range [0.0, M_PI/2]. More...

bool	HasRange () const
	Returns TRUE if maximum distance of point light source is defined. More...

Standard_ShortReal	Range () const
	Returns maximum distance on which point light source affects to objects and is considered during illumination calculations. 0.0 means disabling range considering at all without any distance limits. Has sense only for point light sources (positional and spot). More...

void	SetRange (Standard_ShortReal theValue)
	Modifies maximum distance on which point light source affects to objects and is considered during illumination calculations. Positional and spot lights are only point light sources. 0.0 means disabling range considering at all without any distance limits. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

low-level access methods
TCollection_AsciiString	myId
	resource id More...

TCollection_AsciiString	myName
	user given name More...

gp_Pnt	myPosition
	light position More...

Quantity_ColorRGBA	myColor
	light color More...

Graphic3d_Vec4	myDirection
	direction of directional/spot light More...

Graphic3d_Vec4	myParams
	packed light parameters More...

Standard_ShortReal	mySmoothness
	radius for point light or cone angle for directional light More...

Standard_ShortReal	myIntensity
	intensity multiplier for light More...

const Graphic3d_TypeOfLightSource	myType
	Graphic3d_TypeOfLightSource enumeration. More...

Standard_Size	myRevision
	modification counter More...

Standard_Boolean	myIsHeadlight
	flag to mark head light More...

Standard_Boolean	myIsEnabled
	enabled state More...

Standard_Boolean	myToCastShadows
	casting shadows is requested More...

const TCollection_AsciiString &	GetId () const

const Graphic3d_Vec4 &	PackedParams () const
	Packed light parameters. More...

const Graphic3d_Vec4 &	PackedColor () const
	Returns the color of the light source with dummy Alpha component, which should be ignored. More...

const Graphic3d_Vec4 &	PackedDirectionRange () const
	Returns direction of directional/spot light and range for positional/spot light in alpha channel. More...

Graphic3d_Vec3	PackedDirection () const
	Returns direction of directional/spot light. More...

Standard_Size	Revision () const

void	DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const
	Dumps the content of me into the stream. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

Generic light source definition. This class defines arbitrary light source - see Graphic3d_TypeOfLightSource enumeration. Some parameters are applicable only to particular light type; calling methods unrelated to current type will throw an exception.

Constructor & Destructor Documentation

◆ Graphic3d_CLight()

Graphic3d_CLight::Graphic3d_CLight ( Graphic3d_TypeOfLightSource theType )

Empty constructor, which should be followed by light source properties configuration.

Member Function Documentation

◆ Angle()

Standard_ShortReal Graphic3d_CLight::Angle ( ) const

inline

Returns an angle in radians of the cone created by the spot; 30 degrees by default.

◆ Attenuation()

void Graphic3d_CLight::Attenuation	(	Standard_Real &	theConstAttenuation,
		Standard_Real &	theLinearAttenuation
	)		const

inline

Returns the attenuation factors.

◆ Color()

const Quantity_Color& Graphic3d_CLight::Color ( ) const

inline

Returns the color of the light source; WHITE by default.

◆ Concentration()

Standard_ShortReal Graphic3d_CLight::Concentration ( ) const

inline

Returns intensity distribution of the spot light, within [0.0, 1.0] range; 1.0 by default. This coefficient should be converted into spotlight exponent within [0.0, 128.0] range:

float aSpotExponent = Concentration() * 128.0;

anAttenuation *= pow (aCosA, aSpotExponent);"

The concentration factor determines the dispersion of the light on the surface, the default value (1.0) corresponds to a minimum of dispersion.

◆ ConstAttenuation()

Standard_ShortReal Graphic3d_CLight::ConstAttenuation ( ) const

inline

Returns constant attenuation factor of positional/spot light source; 1.0f by default. Distance attenuation factors of reducing positional/spot light intensity depending on the distance from its position:

float anAttenuation = 1.0 / (ConstAttenuation() + LinearAttenuation() * theDistance + QuadraticAttenuation() * theDistance * theDistance);

◆ CopyFrom()

void Graphic3d_CLight::CopyFrom ( const Handle< Graphic3d_CLight > & theLight )

Copy parameters from another light source excluding source type.

◆ Direction() [1/2]

gp_Dir Graphic3d_CLight::Direction ( ) const

inline

Returns direction of directional/spot light.

◆ Direction() [2/2]

void Graphic3d_CLight::Direction	(	Standard_Real &	theVx,
		Standard_Real &	theVy,
		Standard_Real &	theVz
	)		const

inline

Returns the theVx, theVy, theVz direction of the light source.

◆ DisplayPosition()

const gp_Pnt& Graphic3d_CLight::DisplayPosition ( ) const

inline

Returns location of positional/spot/directional light, which is the same as returned by Position().

◆ DumpJson()

void Graphic3d_CLight::DumpJson	(	Standard_OStream &	theOStream,
		Standard_Integer	theDepth = `-1`
	)		const

Dumps the content of me into the stream.

◆ GetId()

const TCollection_AsciiString& Graphic3d_CLight::GetId ( ) const

inline

Returns: light resource identifier string

◆ HasRange()

bool Graphic3d_CLight::HasRange ( ) const

inline

Returns TRUE if maximum distance of point light source is defined.

◆ Headlight()

Standard_Boolean Graphic3d_CLight::Headlight ( ) const

inline

Alias for IsHeadlight().

◆ Intensity()

Standard_ShortReal Graphic3d_CLight::Intensity ( ) const

inline

Returns the intensity of light source; 1.0 by default.

◆ IsEnabled()

Standard_Boolean Graphic3d_CLight::IsEnabled ( ) const

inline

Check that the light source is turned on; TRUE by default. This flag affects all occurrences of light sources, where it was registered and activated; so that it is possible defining an active light in View which is actually in disabled state.

◆ IsHeadlight()

Standard_Boolean Graphic3d_CLight::IsHeadlight ( ) const

inline

Returns true if the light is a headlight; FALSE by default. Headlight flag means that light position/direction are defined not in a World coordinate system, but relative to the camera orientation.

◆ LinearAttenuation()

Standard_ShortReal Graphic3d_CLight::LinearAttenuation ( ) const

inline

Returns linear attenuation factor of positional/spot light source; 0.0 by default. Distance attenuation factors of reducing positional/spot light intensity depending on the distance from its position:

float anAttenuation = 1.0 / (ConstAttenuation() + LinearAttenuation() * theDistance + QuadraticAttenuation() * theDistance * theDistance);

◆ Name()

const TCollection_AsciiString& Graphic3d_CLight::Name ( ) const

inline

Returns light source name; empty string by default.

◆ PackedColor()

const Graphic3d_Vec4& Graphic3d_CLight::PackedColor ( ) const

inline

Returns the color of the light source with dummy Alpha component, which should be ignored.

◆ PackedDirection()

Graphic3d_Vec3 Graphic3d_CLight::PackedDirection ( ) const

inline

Returns direction of directional/spot light.

◆ PackedDirectionRange()

const Graphic3d_Vec4& Graphic3d_CLight::PackedDirectionRange ( ) const

inline

Returns direction of directional/spot light and range for positional/spot light in alpha channel.

◆ PackedParams()

const Graphic3d_Vec4& Graphic3d_CLight::PackedParams ( ) const

inline

Packed light parameters.

◆ Position() [1/2]

const gp_Pnt& Graphic3d_CLight::Position ( ) const

inline

Returns location of positional/spot light; (0, 0, 0) by default.

◆ Position() [2/2]

void Graphic3d_CLight::Position	(	Standard_Real &	theX,
		Standard_Real &	theY,
		Standard_Real &	theZ
	)		const

inline

Returns location of positional/spot light.

◆ Range()

Standard_ShortReal Graphic3d_CLight::Range ( ) const

inline

Returns maximum distance on which point light source affects to objects and is considered during illumination calculations. 0.0 means disabling range considering at all without any distance limits. Has sense only for point light sources (positional and spot).

◆ Revision()

Standard_Size Graphic3d_CLight::Revision ( ) const

inline

Returns: modification counter

◆ SetAngle()

void Graphic3d_CLight::SetAngle ( Standard_ShortReal theAngle )

Angle in radians of the cone created by the spot, should be within range (0.0, M_PI).

◆ SetAttenuation()

void Graphic3d_CLight::SetAttenuation	(	Standard_ShortReal	theConstAttenuation,
		Standard_ShortReal	theLinearAttenuation
	)

Defines the coefficients of attenuation; values should be >= 0.0 and their summ should not be equal to 0.

◆ SetCastShadows()

void Graphic3d_CLight::SetCastShadows ( Standard_Boolean theToCast )

Enable/disable shadow casting.

◆ SetColor()

void Graphic3d_CLight::SetColor ( const Quantity_Color & theColor )

Defines the color of a light source by giving the basic color.

◆ SetConcentration()

void Graphic3d_CLight::SetConcentration ( Standard_ShortReal theConcentration )

Defines the coefficient of concentration; value should be within range [0.0, 1.0].

◆ SetDirection() [1/2]

void Graphic3d_CLight::SetDirection ( const gp_Dir & theDir )

Sets direction of directional/spot light.

◆ SetDirection() [2/2]

void Graphic3d_CLight::SetDirection	(	Standard_Real	theVx,
		Standard_Real	theVy,
		Standard_Real	theVz
	)

inline

Sets direction of directional/spot light.

◆ SetDisplayPosition()

void Graphic3d_CLight::SetDisplayPosition ( const gp_Pnt & thePosition )

Setup location of positional/spot/directional light, which is the same as SetPosition() but allows directional light source (technically having no position, but this point can be used for displaying light source presentation).

◆ SetEnabled()

void Graphic3d_CLight::SetEnabled ( Standard_Boolean theIsOn )

Change enabled state of the light state. This call does not remove or deactivate light source in Views/Viewers; instead it turns it OFF so that it just have no effect.

◆ SetHeadlight()

void Graphic3d_CLight::SetHeadlight ( Standard_Boolean theValue )

Setup headlight flag.

◆ SetIntensity()

void Graphic3d_CLight::SetIntensity ( Standard_ShortReal theValue )

Modifies the intensity of light source, which should be > 0.0.

◆ SetName()

void Graphic3d_CLight::SetName ( const TCollection_AsciiString & theName )

inline

Sets light source name.

◆ SetPosition() [1/2]

void Graphic3d_CLight::SetPosition ( const gp_Pnt & thePosition )

Setup location of positional/spot light.

◆ SetPosition() [2/2]

void Graphic3d_CLight::SetPosition	(	Standard_Real	theX,
		Standard_Real	theY,
		Standard_Real	theZ
	)

inline

Setup location of positional/spot light.

◆ SetRange()

void Graphic3d_CLight::SetRange ( Standard_ShortReal theValue )

Modifies maximum distance on which point light source affects to objects and is considered during illumination calculations. Positional and spot lights are only point light sources. 0.0 means disabling range considering at all without any distance limits.

◆ SetSmoothAngle()

void Graphic3d_CLight::SetSmoothAngle ( Standard_ShortReal theValue )

Modifies the smoothing angle (in radians) of directional light source; should be within range [0.0, M_PI/2].

◆ SetSmoothRadius()

void Graphic3d_CLight::SetSmoothRadius ( Standard_ShortReal theValue )

Modifies the smoothing radius of positional/spot light; should be >= 0.0.

◆ Smoothness()

Standard_ShortReal Graphic3d_CLight::Smoothness ( ) const

inline

Returns the smoothness of light source (either smoothing angle for directional light or smoothing radius in case of positional light); 0.0 by default.

◆ ToCastShadows()

Standard_Boolean Graphic3d_CLight::ToCastShadows ( ) const

inline

Return TRUE if shadow casting is enabled; FALSE by default. Has no effect in Ray-Tracing rendering mode.

◆ Type()

Graphic3d_TypeOfLightSource Graphic3d_CLight::Type ( ) const

inline

Returns the Type of the Light, cannot be changed after object construction.

Field Documentation

◆ myColor

Quantity_ColorRGBA Graphic3d_CLight::myColor

protected

light color

◆ myDirection

Graphic3d_Vec4 Graphic3d_CLight::myDirection

protected

direction of directional/spot light

◆ myId

TCollection_AsciiString Graphic3d_CLight::myId

protected

resource id

◆ myIntensity

Standard_ShortReal Graphic3d_CLight::myIntensity

protected

intensity multiplier for light

◆ myIsEnabled

Standard_Boolean Graphic3d_CLight::myIsEnabled

protected

enabled state

◆ myIsHeadlight

Standard_Boolean Graphic3d_CLight::myIsHeadlight

protected

flag to mark head light

◆ myName

TCollection_AsciiString Graphic3d_CLight::myName

protected

user given name

◆ myParams

Graphic3d_Vec4 Graphic3d_CLight::myParams

protected

packed light parameters

◆ myPosition

gp_Pnt Graphic3d_CLight::myPosition

protected

light position

◆ myRevision

Standard_Size Graphic3d_CLight::myRevision

protected

modification counter

◆ mySmoothness

Standard_ShortReal Graphic3d_CLight::mySmoothness

protected

radius for point light or cone angle for directional light

◆ myToCastShadows

Standard_Boolean Graphic3d_CLight::myToCastShadows

protected

casting shadows is requested

◆ myType

const Graphic3d_TypeOfLightSource Graphic3d_CLight::myType

protected

Graphic3d_TypeOfLightSource enumeration.

The documentation for this class was generated from the following file:

Graphic3d_CLight.hxx

Public Member Functions

low-level access methods

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ Graphic3d_CLight()

Member Function Documentation

◆ Angle()

◆ Attenuation()

◆ Color()

◆ Concentration()

◆ ConstAttenuation()

◆ CopyFrom()

◆ Direction() [1/2]

◆ Direction() [2/2]

◆ DisplayPosition()

◆ DumpJson()

◆ GetId()

◆ HasRange()

◆ Headlight()

◆ Intensity()

◆ IsEnabled()

◆ IsHeadlight()

◆ LinearAttenuation()

◆ Name()

◆ PackedColor()

◆ PackedDirection()

◆ PackedDirectionRange()

◆ PackedParams()

◆ Position() [1/2]

◆ Position() [2/2]

◆ Range()

◆ Revision()

◆ SetAngle()

◆ SetAttenuation()

◆ SetCastShadows()

◆ SetColor()

◆ SetConcentration()

◆ SetDirection() [1/2]

◆ SetDirection() [2/2]

◆ SetDisplayPosition()

◆ SetEnabled()

◆ SetHeadlight()

◆ SetIntensity()

◆ SetName()

◆ SetPosition() [1/2]

◆ SetPosition() [2/2]

◆ SetRange()

◆ SetSmoothAngle()

◆ SetSmoothRadius()

◆ Smoothness()

◆ ToCastShadows()

◆ Type()

Field Documentation

◆ myColor

◆ myDirection

◆ myId

◆ myIntensity

◆ myIsEnabled

◆ myIsHeadlight

◆ myName

◆ myParams

◆ myPosition

◆ myRevision

◆ mySmoothness

◆ myToCastShadows

◆ myType