Implementation of the intersection between two quadric patches : Plane, Cone, Cylinder or Sphere. More...

#include <IntPatch_ImpImpIntersection.hxx>

Public Types
enum	IntStatus { IntStatus_OK, IntStatus_InfiniteSectionCurve, IntStatus_Fail }

Public Member Functions
	IntPatch_ImpImpIntersection ()

	IntPatch_ImpImpIntersection (const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &D1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor3d_TopolTool > &D2, const Standard_Real TolArc, const Standard_Real TolTang, const Standard_Boolean theIsReqToKeepRLine=Standard_False)
	Flag theIsReqToKeepRLine has been entered only for compatibility with TopOpeBRep package. It shall be deleted after deleting TopOpeBRep. When intersection result returns IntPatch_RLine and another IntPatch_Line (not restriction) we (in case of theIsReqToKeepRLine==TRUE) will always keep both lines even if they are coincided. More...

void	Perform (const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &D1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor3d_TopolTool > &D2, const Standard_Real TolArc, const Standard_Real TolTang, const Standard_Boolean theIsReqToKeepRLine=Standard_False)
	Flag theIsReqToKeepRLine has been entered only for compatibility with TopOpeBRep package. It shall be deleted after deleting TopOpeBRep. When intersection result returns IntPatch_RLine and another IntPatch_Line (not restriction) we (in case of theIsReqToKeepRLine==TRUE) will always keep both lines even if they are coincided. More...

Standard_Boolean	IsDone () const
	Returns True if the calculus was successful. More...

IntStatus	GetStatus () const
	Returns status. More...

Standard_Boolean	IsEmpty () const
	Returns true if the is no intersection. More...

Standard_Boolean	TangentFaces () const
	Returns True if the two patches are considered as entirely tangent, i.e every restriction arc of one patch is inside the geometric base of the other patch. More...

Standard_Boolean	OppositeFaces () const
	Returns True when the TangentFaces returns True and the normal vectors evaluated at a point on the first and the second surface are opposite. The exception DomainError is raised if TangentFaces returns False. More...

Standard_Integer	NbPnts () const
	Returns the number of "single" points. More...

const IntPatch_Point &	Point (const Standard_Integer Index) const
	Returns the point of range Index. An exception is raised if Index<=0 or Index>NbPnt. More...

Standard_Integer	NbLines () const
	Returns the number of intersection lines. More...

const Handle< IntPatch_Line > &	Line (const Standard_Integer Index) const
	Returns the line of range Index. An exception is raised if Index<=0 or Index>NbLine. More...

Detailed Description

Implementation of the intersection between two quadric patches : Plane, Cone, Cylinder or Sphere.

Member Enumeration Documentation

◆ IntStatus

enum IntPatch_ImpImpIntersection::IntStatus

Enumerator
IntStatus_OK	OK. Good intersection result.
IntStatus_InfiniteSectionCurve	Intersection curve is too long (e.g. as in the bug #26894). We cannot provide precise computation of value and derivatives of this curve having used floating-point model determined by IEEE 754 standard. As result, OCCT algorithms cannot work with that curve correctly.
IntStatus_Fail	Algorithm cannot finish correctly.

Constructor & Destructor Documentation

◆ IntPatch_ImpImpIntersection() [1/2]

IntPatch_ImpImpIntersection::IntPatch_ImpImpIntersection ( )

◆ IntPatch_ImpImpIntersection() [2/2]

IntPatch_ImpImpIntersection::IntPatch_ImpImpIntersection	(	const Handle< Adaptor3d_Surface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	D1,
		const Handle< Adaptor3d_Surface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	D2,
		const Standard_Real	TolArc,
		const Standard_Real	TolTang,
		const Standard_Boolean	theIsReqToKeepRLine = `Standard_False`
	)

Flag theIsReqToKeepRLine has been entered only for compatibility with TopOpeBRep package. It shall be deleted after deleting TopOpeBRep. When intersection result returns IntPatch_RLine and another IntPatch_Line (not restriction) we (in case of theIsReqToKeepRLine==TRUE) will always keep both lines even if they are coincided.

Member Function Documentation

◆ GetStatus()

IntStatus IntPatch_ImpImpIntersection::GetStatus ( ) const

Returns status.

◆ IsDone()

Standard_Boolean IntPatch_ImpImpIntersection::IsDone ( ) const

Returns True if the calculus was successful.

◆ IsEmpty()

Standard_Boolean IntPatch_ImpImpIntersection::IsEmpty ( ) const

Returns true if the is no intersection.

◆ Line()

const Handle< IntPatch_Line >& IntPatch_ImpImpIntersection::Line ( const Standard_Integer Index ) const

Returns the line of range Index. An exception is raised if Index<=0 or Index>NbLine.

◆ NbLines()

Standard_Integer IntPatch_ImpImpIntersection::NbLines ( ) const

Returns the number of intersection lines.

◆ NbPnts()

Standard_Integer IntPatch_ImpImpIntersection::NbPnts ( ) const

Returns the number of "single" points.

◆ OppositeFaces()

Standard_Boolean IntPatch_ImpImpIntersection::OppositeFaces ( ) const

Returns True when the TangentFaces returns True and the normal vectors evaluated at a point on the first and the second surface are opposite. The exception DomainError is raised if TangentFaces returns False.

◆ Perform()

void IntPatch_ImpImpIntersection::Perform	(	const Handle< Adaptor3d_Surface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	D1,
		const Handle< Adaptor3d_Surface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	D2,
		const Standard_Real	TolArc,
		const Standard_Real	TolTang,
		const Standard_Boolean	theIsReqToKeepRLine = `Standard_False`
	)

Flag theIsReqToKeepRLine has been entered only for compatibility with TopOpeBRep package. It shall be deleted after deleting TopOpeBRep. When intersection result returns IntPatch_RLine and another IntPatch_Line (not restriction) we (in case of theIsReqToKeepRLine==TRUE) will always keep both lines even if they are coincided.

◆ Point()

const IntPatch_Point& IntPatch_ImpImpIntersection::Point ( const Standard_Integer Index ) const

Returns the point of range Index. An exception is raised if Index<=0 or Index>NbPnt.

◆ TangentFaces()

Standard_Boolean IntPatch_ImpImpIntersection::TangentFaces ( ) const

Returns True if the two patches are considered as entirely tangent, i.e every restriction arc of one patch is inside the geometric base of the other patch.

The documentation for this class was generated from the following file:

IntPatch_ImpImpIntersection.hxx

Public Types

Public Member Functions