Class redefine methods of TopolTool from Adaptor3d concerning sample points. More...

#include <IntTools_TopolTool.hxx>

Inheritance diagram for IntTools_TopolTool:

Public Member Functions
	IntTools_TopolTool ()
	Empty constructor. More...

	IntTools_TopolTool (const Handle< Adaptor3d_Surface > &theSurface)
	Initializes me by surface. More...

virtual void	Initialize () override
	Redefined empty initializer. More...

virtual void	Initialize (const Handle< Adaptor3d_Surface > &theSurface) override
	Initializes me by surface. More...

virtual void	ComputeSamplePoints () override

virtual Standard_Integer	NbSamplesU () override
	Computes the sample-points for the intersections algorithms. More...

virtual Standard_Integer	NbSamplesV () override
	Computes the sample-points for the intersections algorithms. More...

virtual Standard_Integer	NbSamples () override
	Computes the sample-points for the intersections algorithms. More...

virtual void	SamplePoint (const Standard_Integer Index, gp_Pnt2d &P2d, gp_Pnt &P3d) override
	Returns a 2d point from surface myS and a corresponded 3d point for given index. The index should be from 1 to NbSamples() More...

virtual void	SamplePnts (const Standard_Real theDefl, const Standard_Integer theNUmin, const Standard_Integer theNVmin) override
	compute the sample-points for the intersections algorithms by adaptive algorithm for BSpline surfaces. For other surfaces algorithm is the same as in method ComputeSamplePoints(), but only fill arrays of U and V sample parameters; theDefl is a required deflection theNUmin, theNVmin are minimal nb points for U and V. More...

Public Member Functions inherited from Adaptor3d_TopolTool
	Adaptor3d_TopolTool ()

	Adaptor3d_TopolTool (const Handle< Adaptor3d_Surface > &Surface)

virtual void	Initialize (const Handle< Adaptor2d_Curve2d > &Curve)

virtual void	Init ()

virtual Standard_Boolean	More ()

virtual Handle< Adaptor2d_Curve2d >	Value ()

virtual void	Next ()

virtual void	InitVertexIterator ()

virtual Standard_Boolean	MoreVertex ()

virtual Handle< Adaptor3d_HVertex >	Vertex ()

virtual void	NextVertex ()

virtual TopAbs_State	Classify (const gp_Pnt2d &P, const Standard_Real Tol, const Standard_Boolean ReacdreOnPeriodic=Standard_True)

virtual Standard_Boolean	IsThePointOn (const gp_Pnt2d &P, const Standard_Real Tol, const Standard_Boolean ReacdreOnPeriodic=Standard_True)

virtual TopAbs_Orientation	Orientation (const Handle< Adaptor2d_Curve2d > &C)
	If the function returns the orientation of the arc. If the orientation is FORWARD or REVERSED, the arc is a "real" limit of the surface. If the orientation is INTERNAL or EXTERNAL, the arc is considered as an arc on the surface. More...

virtual TopAbs_Orientation	Orientation (const Handle< Adaptor3d_HVertex > &V)
	Returns the orientation of the vertex V. The vertex has been found with an exploration on a given arc. The orientation is the orientation of the vertex on this arc. More...

virtual Standard_Boolean	Identical (const Handle< Adaptor3d_HVertex > &V1, const Handle< Adaptor3d_HVertex > &V2)
	Returns True if the vertices V1 and V2 are identical. This method does not take the orientation of the vertices in account. More...

virtual Standard_Boolean	Has3d () const
	answers if arcs and vertices may have 3d representations, so that we could use Tol3d and Pnt methods. More...

virtual Standard_Real	Tol3d (const Handle< Adaptor2d_Curve2d > &C) const
	returns 3d tolerance of the arc C More...

virtual Standard_Real	Tol3d (const Handle< Adaptor3d_HVertex > &V) const
	returns 3d tolerance of the vertex V More...

virtual gp_Pnt	Pnt (const Handle< Adaptor3d_HVertex > &V) const
	returns 3d point of the vertex V More...

void	UParameters (TColStd_Array1OfReal &theArray) const
	return the set of U parameters on the surface obtained by the method SamplePnts More...

void	VParameters (TColStd_Array1OfReal &theArray) const
	return the set of V parameters on the surface obtained by the method SamplePnts More...

virtual Standard_Boolean	DomainIsInfinite ()

virtual Standard_Address	Edge () const

virtual void	BSplSamplePnts (const Standard_Real theDefl, const Standard_Integer theNUmin, const Standard_Integer theNVmin)
	Compute the sample-points for the intersections algorithms by adaptive algorithm for BSpline surfaces - is used in SamplePnts. More...

virtual Standard_Boolean	IsUniformSampling () const
	Returns true if provide uniform sampling of points. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Adaptor3d_TopolTool
static void	GetConeApexParam (const gp_Cone &theC, Standard_Real &theU, Standard_Real &theV)
	Computes the cone's apex parameters. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Protected Attributes inherited from Adaptor3d_TopolTool
Handle< Adaptor3d_Surface >	myS

Standard_Integer	myNbSamplesU

Standard_Integer	myNbSamplesV

Handle< TColStd_HArray1OfReal >	myUPars

Handle< TColStd_HArray1OfReal >	myVPars

Detailed Description

Class redefine methods of TopolTool from Adaptor3d concerning sample points.

Constructor & Destructor Documentation

◆ IntTools_TopolTool() [1/2]

IntTools_TopolTool::IntTools_TopolTool ( )

Empty constructor.

◆ IntTools_TopolTool() [2/2]

IntTools_TopolTool::IntTools_TopolTool ( const Handle< Adaptor3d_Surface > & theSurface )

Initializes me by surface.

Member Function Documentation

◆ ComputeSamplePoints()

virtual void IntTools_TopolTool::ComputeSamplePoints ( )

overridevirtual

Reimplemented from Adaptor3d_TopolTool.

◆ Initialize() [1/2]

virtual void IntTools_TopolTool::Initialize ( )

overridevirtual

Redefined empty initializer.

Warning: Raises the exception NotImplemented

Reimplemented from Adaptor3d_TopolTool.

◆ Initialize() [2/2]

virtual void IntTools_TopolTool::Initialize ( const Handle< Adaptor3d_Surface > & theSurface )

overridevirtual

Initializes me by surface.

Reimplemented from Adaptor3d_TopolTool.

◆ NbSamples()

virtual Standard_Integer IntTools_TopolTool::NbSamples ( )

overridevirtual

Computes the sample-points for the intersections algorithms.

Reimplemented from Adaptor3d_TopolTool.

◆ NbSamplesU()

virtual Standard_Integer IntTools_TopolTool::NbSamplesU ( )

overridevirtual

Computes the sample-points for the intersections algorithms.

Reimplemented from Adaptor3d_TopolTool.

◆ NbSamplesV()

virtual Standard_Integer IntTools_TopolTool::NbSamplesV ( )

overridevirtual

Computes the sample-points for the intersections algorithms.

Reimplemented from Adaptor3d_TopolTool.

◆ SamplePnts()

virtual void IntTools_TopolTool::SamplePnts	(	const Standard_Real	theDefl,
		const Standard_Integer	theNUmin,
		const Standard_Integer	theNVmin
	)

overridevirtual

compute the sample-points for the intersections algorithms by adaptive algorithm for BSpline surfaces. For other surfaces algorithm is the same as in method ComputeSamplePoints(), but only fill arrays of U and V sample parameters; theDefl is a required deflection theNUmin, theNVmin are minimal nb points for U and V.

Reimplemented from Adaptor3d_TopolTool.

◆ SamplePoint()

virtual void IntTools_TopolTool::SamplePoint	(	const Standard_Integer	Index,
		gp_Pnt2d &	P2d,
		gp_Pnt &	P3d
	)

overridevirtual

Returns a 2d point from surface myS and a corresponded 3d point for given index. The index should be from 1 to NbSamples()

Reimplemented from Adaptor3d_TopolTool.

The documentation for this class was generated from the following file:

IntTools_TopolTool.hxx

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ IntTools_TopolTool() [1/2]

◆ IntTools_TopolTool() [2/2]

Member Function Documentation

◆ ComputeSamplePoints()

◆ Initialize() [1/2]

◆ Initialize() [2/2]

◆ NbSamples()

◆ NbSamplesU()

◆ NbSamplesV()

◆ SamplePnts()

◆ SamplePoint()