Set of the methods useful for the MAT's computation. Tool2d contains the geometry of the bisecting locus. More...

#include <MAT2d_Tool2d.hxx>

Public Member Functions
	MAT2d_Tool2d ()
	Empty Constructor. More...

void	Sense (const MAT_Side aside)
	<aSide> defines the side of the computation of the map. More...

void	SetJoinType (const GeomAbs_JoinType aJoinType)

void	InitItems (const Handle< MAT2d_Circuit > &aCircuit)
	InitItems cuts the line in Items. this Items are the geometrics representations of the BasicElts from MAT. More...

Standard_Integer	NumberOfItems () const
	Returns the Number of Items . More...

Standard_Real	ToleranceOfConfusion () const
	Returns tolerance to test the confusion of two points. More...

Standard_Integer	FirstPoint (const Standard_Integer anitem, Standard_Real &dist)
	Creates the point at the origin of the bisector between anitem and the previous item. dist is the distance from the FirstPoint to <anitem>. Returns the index of this point in <theGeomPnts>. More...

Standard_Integer	TangentBefore (const Standard_Integer anitem, const Standard_Boolean IsOpenResult)
	Creates the Tangent at the end of the Item defined by <anitem>. Returns the index of this vector in <theGeomVecs> More...

Standard_Integer	TangentAfter (const Standard_Integer anitem, const Standard_Boolean IsOpenResult)
	Creates the Reversed Tangent at the origin of the Item defined by <anitem>. Returns the index of this vector in <theGeomVecs> More...

Standard_Integer	Tangent (const Standard_Integer bisector)
	Creates the Tangent at the end of the bisector defined by <bisector>. Returns the index of this vector in <theGeomVecs> More...

void	CreateBisector (const Handle< MAT_Bisector > &abisector)
	Creates the geometric bisector defined by <abisector>. More...

Standard_Boolean	TrimBisector (const Handle< MAT_Bisector > &abisector)
	Trims the geometric bisector by the <firstparameter> of <abisector>. If the parameter is out of the bisector, Return FALSE. else Return True. More...

Standard_Boolean	TrimBisector (const Handle< MAT_Bisector > &abisector, const Standard_Integer apoint)
	Trims the geometric bisector by the point of index <apoint> in <theGeomPnts>. If the point is out of the bisector, Return FALSE. else Return True. More...

Standard_Real	IntersectBisector (const Handle< MAT_Bisector > &bisectorone, const Handle< MAT_Bisector > &bisectortwo, Standard_Integer &intpnt)
	Computes the point of intersection between the bisectors defined by <bisectorone> and <bisectortwo> . If this point exists, <intpnt> is its index in <theGeomPnts> and Return the distance of the point from the bisector else Return <RealLast>. More...

Standard_Real	Distance (const Handle< MAT_Bisector > &abisector, const Standard_Real param1, const Standard_Real param2) const
	Returns the distance between the two points designed by their parameters on <abisector>. More...

void	Dump (const Standard_Integer bisector, const Standard_Integer erease) const
	displays information about the bisector defined by <bisector>. More...

const Bisector_Bisec &	GeomBis (const Standard_Integer Index) const
	Returns the <Bisec> of index <Index> in <theGeomBisectors>. More...

Handle< Geom2d_Geometry >	GeomElt (const Standard_Integer Index) const
	Returns the Geometry of index <Index> in <theGeomElts>. More...

const gp_Pnt2d &	GeomPnt (const Standard_Integer Index) const
	Returns the point of index <Index> in the <theGeomPnts>. More...

const gp_Vec2d &	GeomVec (const Standard_Integer Index) const
	Returns the vector of index <Index> in the <theGeomVecs>. More...

Handle< MAT2d_Circuit >	Circuit () const

void	BisecFusion (const Standard_Integer Index1, const Standard_Integer Index2)

Bisector_Bisec &	ChangeGeomBis (const Standard_Integer Index)
	Returns the <Bisec> of index <Index> in <theGeomBisectors>. More...

Detailed Description

Set of the methods useful for the MAT's computation. Tool2d contains the geometry of the bisecting locus.

Constructor & Destructor Documentation

◆ MAT2d_Tool2d()

MAT2d_Tool2d::MAT2d_Tool2d ( )

Empty Constructor.

Member Function Documentation

◆ BisecFusion()

void MAT2d_Tool2d::BisecFusion	(	const Standard_Integer	Index1,
		const Standard_Integer	Index2
	)

◆ ChangeGeomBis()

Bisector_Bisec& MAT2d_Tool2d::ChangeGeomBis ( const Standard_Integer Index )

Returns the <Bisec> of index <Index> in <theGeomBisectors>.

◆ Circuit()

Handle< MAT2d_Circuit > MAT2d_Tool2d::Circuit ( ) const

◆ CreateBisector()

void MAT2d_Tool2d::CreateBisector ( const Handle< MAT_Bisector > & abisector )

Creates the geometric bisector defined by <abisector>.

◆ Distance()

Standard_Real MAT2d_Tool2d::Distance	(	const Handle< MAT_Bisector > &	abisector,
		const Standard_Real	param1,
		const Standard_Real	param2
	)		const

Returns the distance between the two points designed by their parameters on <abisector>.

◆ Dump()

void MAT2d_Tool2d::Dump	(	const Standard_Integer	bisector,
		const Standard_Integer	erease
	)		const

displays information about the bisector defined by <bisector>.

◆ FirstPoint()

Standard_Integer MAT2d_Tool2d::FirstPoint	(	const Standard_Integer	anitem,
		Standard_Real &	dist
	)

Creates the point at the origin of the bisector between anitem and the previous item. dist is the distance from the FirstPoint to <anitem>. Returns the index of this point in <theGeomPnts>.

◆ GeomBis()

const Bisector_Bisec& MAT2d_Tool2d::GeomBis ( const Standard_Integer Index ) const

Returns the <Bisec> of index <Index> in <theGeomBisectors>.

◆ GeomElt()

Handle< Geom2d_Geometry > MAT2d_Tool2d::GeomElt ( const Standard_Integer Index ) const

Returns the Geometry of index <Index> in <theGeomElts>.

◆ GeomPnt()

const gp_Pnt2d& MAT2d_Tool2d::GeomPnt ( const Standard_Integer Index ) const

Returns the point of index <Index> in the <theGeomPnts>.

◆ GeomVec()

const gp_Vec2d& MAT2d_Tool2d::GeomVec ( const Standard_Integer Index ) const

Returns the vector of index <Index> in the <theGeomVecs>.

◆ InitItems()

void MAT2d_Tool2d::InitItems ( const Handle< MAT2d_Circuit > & aCircuit )

InitItems cuts the line in Items. this Items are the geometrics representations of the BasicElts from MAT.

◆ IntersectBisector()

Standard_Real MAT2d_Tool2d::IntersectBisector	(	const Handle< MAT_Bisector > &	bisectorone,
		const Handle< MAT_Bisector > &	bisectortwo,
		Standard_Integer &	intpnt
	)

Computes the point of intersection between the bisectors defined by <bisectorone> and <bisectortwo> . If this point exists, <intpnt> is its index in <theGeomPnts> and Return the distance of the point from the bisector else Return <RealLast>.

◆ NumberOfItems()

Standard_Integer MAT2d_Tool2d::NumberOfItems ( ) const

Returns the Number of Items .

◆ Sense()

void MAT2d_Tool2d::Sense ( const MAT_Side aside )

<aSide> defines the side of the computation of the map.

◆ SetJoinType()

void MAT2d_Tool2d::SetJoinType ( const GeomAbs_JoinType aJoinType )

◆ Tangent()

Standard_Integer MAT2d_Tool2d::Tangent ( const Standard_Integer bisector )

Creates the Tangent at the end of the bisector defined by <bisector>. Returns the index of this vector in <theGeomVecs>

◆ TangentAfter()

Standard_Integer MAT2d_Tool2d::TangentAfter	(	const Standard_Integer	anitem,
		const Standard_Boolean	IsOpenResult
	)

Creates the Reversed Tangent at the origin of the Item defined by <anitem>. Returns the index of this vector in <theGeomVecs>

◆ TangentBefore()

Standard_Integer MAT2d_Tool2d::TangentBefore	(	const Standard_Integer	anitem,
		const Standard_Boolean	IsOpenResult
	)

Creates the Tangent at the end of the Item defined by <anitem>. Returns the index of this vector in <theGeomVecs>

◆ ToleranceOfConfusion()

Standard_Real MAT2d_Tool2d::ToleranceOfConfusion ( ) const

Returns tolerance to test the confusion of two points.

◆ TrimBisector() [1/2]

Standard_Boolean MAT2d_Tool2d::TrimBisector ( const Handle< MAT_Bisector > & abisector )

Trims the geometric bisector by the <firstparameter> of <abisector>. If the parameter is out of the bisector, Return FALSE. else Return True.

◆ TrimBisector() [2/2]

Standard_Boolean MAT2d_Tool2d::TrimBisector	(	const Handle< MAT_Bisector > &	abisector,
		const Standard_Integer	apoint
	)

Trims the geometric bisector by the point of index <apoint> in <theGeomPnts>. If the point is out of the bisector, Return FALSE. else Return True.

The documentation for this class was generated from the following file:

MAT2d_Tool2d.hxx

Public Member Functions