This tool provides a method for computing pcurve by projecting 3d curve onto a surface. Projection is done by 23 or more points (this number is changed for B-Splines according to the following rule: the total number of the points is not less than number of spans * (degree + 1); it is increased recursively starting with 23 and is added with 22 until the condition is fulfilled). Isoparametric cases (if curve corresponds to U=const or V=const on the surface) are recognized with the given precision. More...

#include <ShapeConstruct_ProjectCurveOnSurface.hxx>

Inheritance diagram for ShapeConstruct_ProjectCurveOnSurface:

[legend]

Public Member Functions
	ShapeConstruct_ProjectCurveOnSurface ()
	Empty constructor. More...

virtual void	Init (const Handle< Geom_Surface > &surf, const Standard_Real preci)
	Initializes the object with all necessary parameters, i.e. surface and precision. More...

virtual void	Init (const Handle< ShapeAnalysis_Surface > &surf, const Standard_Real preci)
	Initializes the object with all necessary parameters, i.e. surface and precision. More...

void	SetSurface (const Handle< Geom_Surface > &surf)
	Loads a surface (in the form of Geom_Surface) to project on. More...

void	SetSurface (const Handle< ShapeAnalysis_Surface > &surf)
	Loads a surface (in the form of ShapeAnalysis_Surface) to project on. More...

void	SetPrecision (const Standard_Real preci)
	Sets value for current precision. More...

Standard_Boolean &	BuildCurveMode ()
	Returns (modifiable) the build-curve-3d mode, by default False If True, if the projected curve has been recomputed by interpolation, the 3d curve is also rebuild by interpolation. More...

Standard_Integer &	AdjustOverDegenMode ()
	Returns (modifiable) the flag specifying to which side of parametrical space adjust part of pcurve which lies on seam. This is required in very rare case when 3d curve which is to be projected goes partly along the seam on the closed surface with singularity (e.g. sphere), goes through the degenerated point and paerly lies on internal area of surface. More...

Standard_Boolean	Status (const ShapeExtend_Status theStatus) const
	Returns the status of last Perform. More...

virtual Standard_Boolean	Perform (Handle< Geom_Curve > &c3d, const Standard_Real First, const Standard_Real Last, Handle< Geom2d_Curve > &c2d, const Standard_Real TolFirst=-1, const Standard_Real TolLast=-1)
	Computes the projection of 3d curve onto a surface using the specialized algorithm. Returns False if projector fails, otherwise, if pcurve computed successfully, returns True. The output curve 2D is guaranteed to be same-parameter with input curve 3D on the interval [First, Last]. If the output curve lies on a direct line the infinite line is returned, in the case same-parameter condition is satisfied. TolFirst and TolLast are the tolerances at the ends of input curve 3D. More...

Standard_Boolean	PerformByProjLib (Handle< Geom_Curve > &c3d, const Standard_Real First, const Standard_Real Last, Handle< Geom2d_Curve > &c2d, const GeomAbs_Shape continuity=GeomAbs_C1, const Standard_Integer maxdeg=12, const Standard_Integer nbinterval=-1)
	Computes the projection of 3d curve onto a surface using the standard algorithm from ProjLib. Returns False if standard projector fails or raises an exception or cuts the curve by parametrical bounds of the surface. Else, if pcurve computed successfully, returns True. The continuity, maxdeg and nbinterval are parameters of call to Approx_CurveOnSurface. If nbinterval is equal to -1 (default), this value is computed depending on source 3d curve and surface. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Protected Member Functions
Handle< Geom2d_Curve >	getLine (const TColgp_SequenceOfPnt &points, const TColStd_SequenceOfReal &params, TColgp_SequenceOfPnt2d &points2d, const Standard_Real theTol, Standard_Boolean &IsRecompute, Standard_Boolean &isFromCashe) const
	Try to approximate 3D curve by Geom2d_Line or Geom2d_BsplineCurve with degree 1 with specified tolerance. points - points obtained from 3d curve. params - parameters corresponding points on 3d curves points2d - 2d points lies on line in parametric space theTol - tolerance used for compare initial points 3d and 3d points obtained from line lying in parameric space of surface. More...

Protected Attributes
Handle< ShapeAnalysis_Surface >	mySurf

Standard_Real	myPreci

Standard_Boolean	myBuild

Standard_Integer	myStatus

Standard_Integer	myAdjustOverDegen

Standard_Integer	myNbCashe

gp_Pnt	myCashe3d [2]

gp_Pnt2d	myCashe2d [2]

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

This tool provides a method for computing pcurve by projecting 3d curve onto a surface. Projection is done by 23 or more points (this number is changed for B-Splines according to the following rule: the total number of the points is not less than number of spans * (degree + 1); it is increased recursively starting with 23 and is added with 22 until the condition is fulfilled). Isoparametric cases (if curve corresponds to U=const or V=const on the surface) are recognized with the given precision.

Constructor & Destructor Documentation

◆ ShapeConstruct_ProjectCurveOnSurface()

ShapeConstruct_ProjectCurveOnSurface::ShapeConstruct_ProjectCurveOnSurface ( )

Empty constructor.

Member Function Documentation

◆ AdjustOverDegenMode()

Standard_Integer& ShapeConstruct_ProjectCurveOnSurface::AdjustOverDegenMode ( )

Returns (modifiable) the flag specifying to which side of parametrical space adjust part of pcurve which lies on seam. This is required in very rare case when 3d curve which is to be projected goes partly along the seam on the closed surface with singularity (e.g. sphere), goes through the degenerated point and paerly lies on internal area of surface.

If this flag is True, the seam part of such curve will be adjusted to the left side of parametric space (on sphere U=0), else to the right side (on sphere U=2*PI) Default value is True

◆ BuildCurveMode()

Standard_Boolean& ShapeConstruct_ProjectCurveOnSurface::BuildCurveMode ( )

Returns (modifiable) the build-curve-3d mode, by default False If True, if the projected curve has been recomputed by interpolation, the 3d curve is also rebuild by interpolation.

◆ getLine()

Handle< Geom2d_Curve > ShapeConstruct_ProjectCurveOnSurface::getLine	(	const TColgp_SequenceOfPnt &	points,
		const TColStd_SequenceOfReal &	params,
		TColgp_SequenceOfPnt2d &	points2d,
		const Standard_Real	theTol,
		Standard_Boolean &	IsRecompute,
		Standard_Boolean &	isFromCashe
	)		const

protected

Try to approximate 3D curve by Geom2d_Line or Geom2d_BsplineCurve with degree 1 with specified tolerance. points - points obtained from 3d curve. params - parameters corresponding points on 3d curves points2d - 2d points lies on line in parametric space theTol - tolerance used for compare initial points 3d and 3d points obtained from line lying in parameric space of surface.

◆ Init() [1/2]

virtual void ShapeConstruct_ProjectCurveOnSurface::Init	(	const Handle< Geom_Surface > &	surf,
		const Standard_Real	preci
	)

virtual

Initializes the object with all necessary parameters, i.e. surface and precision.

◆ Init() [2/2]

virtual void ShapeConstruct_ProjectCurveOnSurface::Init	(	const Handle< ShapeAnalysis_Surface > &	surf,
		const Standard_Real	preci
	)

virtual

Initializes the object with all necessary parameters, i.e. surface and precision.

◆ Perform()

virtual Standard_Boolean ShapeConstruct_ProjectCurveOnSurface::Perform	(	Handle< Geom_Curve > &	c3d,
		const Standard_Real	First,
		const Standard_Real	Last,
		Handle< Geom2d_Curve > &	c2d,
		const Standard_Real	TolFirst = `-1`,
		const Standard_Real	TolLast = `-1`
	)

virtual

Computes the projection of 3d curve onto a surface using the specialized algorithm. Returns False if projector fails, otherwise, if pcurve computed successfully, returns True. The output curve 2D is guaranteed to be same-parameter with input curve 3D on the interval [First, Last]. If the output curve lies on a direct line the infinite line is returned, in the case same-parameter condition is satisfied. TolFirst and TolLast are the tolerances at the ends of input curve 3D.

◆ PerformByProjLib()

Standard_Boolean ShapeConstruct_ProjectCurveOnSurface::PerformByProjLib	(	Handle< Geom_Curve > &	c3d,
		const Standard_Real	First,
		const Standard_Real	Last,
		Handle< Geom2d_Curve > &	c2d,
		const GeomAbs_Shape	continuity = `GeomAbs_C1`,
		const Standard_Integer	maxdeg = `12`,
		const Standard_Integer	nbinterval = `-1`
	)

Computes the projection of 3d curve onto a surface using the standard algorithm from ProjLib. Returns False if standard projector fails or raises an exception or cuts the curve by parametrical bounds of the surface. Else, if pcurve computed successfully, returns True. The continuity, maxdeg and nbinterval are parameters of call to Approx_CurveOnSurface. If nbinterval is equal to -1 (default), this value is computed depending on source 3d curve and surface.

◆ SetPrecision()

void ShapeConstruct_ProjectCurveOnSurface::SetPrecision ( const Standard_Real preci )

Sets value for current precision.

◆ SetSurface() [1/2]

void ShapeConstruct_ProjectCurveOnSurface::SetSurface ( const Handle< Geom_Surface > & surf )

Loads a surface (in the form of Geom_Surface) to project on.

◆ SetSurface() [2/2]

void ShapeConstruct_ProjectCurveOnSurface::SetSurface ( const Handle< ShapeAnalysis_Surface > & surf )

Loads a surface (in the form of ShapeAnalysis_Surface) to project on.

◆ Status()

Standard_Boolean ShapeConstruct_ProjectCurveOnSurface::Status ( const ShapeExtend_Status theStatus ) const

Returns the status of last Perform.

Field Documentation

◆ myAdjustOverDegen

Standard_Integer ShapeConstruct_ProjectCurveOnSurface::myAdjustOverDegen

protected

◆ myBuild

Standard_Boolean ShapeConstruct_ProjectCurveOnSurface::myBuild

protected

◆ myCashe2d

gp_Pnt2d ShapeConstruct_ProjectCurveOnSurface::myCashe2d[2]

protected

◆ myCashe3d

gp_Pnt ShapeConstruct_ProjectCurveOnSurface::myCashe3d[2]

protected

◆ myNbCashe

Standard_Integer ShapeConstruct_ProjectCurveOnSurface::myNbCashe

protected

◆ myPreci

Standard_Real ShapeConstruct_ProjectCurveOnSurface::myPreci

protected

◆ myStatus

Standard_Integer ShapeConstruct_ProjectCurveOnSurface::myStatus

protected

◆ mySurf

Handle< ShapeAnalysis_Surface > ShapeConstruct_ProjectCurveOnSurface::mySurf

protected

The documentation for this class was generated from the following file:

ShapeConstruct_ProjectCurveOnSurface.hxx

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ShapeConstruct_ProjectCurveOnSurface()

Member Function Documentation

◆ AdjustOverDegenMode()

◆ BuildCurveMode()

◆ getLine()

◆ Init() [1/2]

◆ Init() [2/2]

◆ Perform()

◆ PerformByProjLib()

◆ SetPrecision()

◆ SetSurface() [1/2]

◆ SetSurface() [2/2]

◆ Status()

Field Documentation

◆ myAdjustOverDegen

◆ myBuild

◆ myCashe2d

◆ myCashe3d

◆ myNbCashe

◆ myPreci

◆ myStatus

◆ mySurf